Here is a screenshot of my problem: [URL]
I made a graph with thousand of points, but the lines which make the curves are too thick and so I can't see exactly where they intersect. I would like to make them thinner.
I would like to make a scatter graph that will graph the attached. The score would be on the Y axis and the birth date would be on the X axis. This is simple to do by itself but what I would like to do in addition to this is to have the top 25% of the scores a single color, the middle 50% of the scores a second color and then the bottom 25% of the scores to be a third color. And if it is possible to have the ID visible when you move your cursor over a given dot in the graph. Currently when I make a scatter graph the X,Y coordinates show when I hoover the cursor over a dot.
View 7 Replies View RelatedHow can i make a graph that will graph against time? lets say i have a bank balance like this:
1/2/2000 $500
1/3/2000 $600
3/12/2000 $400
there may be more than one entry on any one given day, or there may not be an entry for 2 weeks. How can i graph the running balance in a way that it will show the timeline just as a calendar year(or however long i selected) and the points are plotting according to their date, not just equally spaced out.
I'm having trouble combining three lines into one. I'm trying to do a daily weight chart and the x-axis is days of month, and the y-axis is the weight. I have 3 rows for the weight (one red line for weight going up from previous day, one green if the weight goes down from previous day, and one yellow line for equal). I want to make the three into one showing the colors. Right now all they are are vertical lines and are not connected.
View 9 Replies View RelatedI need to create a line graph that has 2 lines for each person, one with the amount, one with the points. The X-Axis is by Weeks going up. How can I do this without making a separate series for each? I've attached an example.
example.xlsx
I have the following data points:
A
B
1
X
Y
2
0.18
0.52
[Code] ......
And can create a scatter diagram fine. However, I've been asked if it's possible to show on the graph, for each point a line to it's respective X and Y co-ordinate. For example, for row 4 (in red), on the same scatter graph, I'd like there to be two lines for this point,
Line1 drawn from (0.1, 0) to (0.1, 0.26) and
Line2 drawn from (0,0.26) to (0.1,0.26)
I know it's possible to overlap graphs in Excel, but I can't find how to achieve this with scatter plots
So on a primary 'y' axis against I have plotted some stacked clusters (3 categories, each with 2 columns and 2 stacks) and now I want to add a percentage line on a secondary 'y' axis to show the % rates for each category.
How do I plot them? I don't want to use Jon Peltiers utility, as I already have it, but still don't know how to use it to achieve the view.
I have an excel worksheet that contains two sets of data. These numbers are then plotted onto a line graph to show the two sets of data against each other.
The graph is working fine, but only for a specific amount of data. The data is split into mutiple lines. From cells A1 all the way to BI1 is one row. I then have information in A4 to BI4. I would like to plot this information on a graph as a single continuous line. Is this possible?
Basically, My graph source is currently =Data!$A$2:$BI$3. This gives me two lines that I want. How do I get the data from A4:BI4 to join up to the first line in the graph.
I have a file sheet named "ratio summary." The data to this is linked to a number of different working sheets (not in the attachment for obvious reasons)
Currently the data in the ratio summary is grouped by year but "open" and the Graph worksheet is automatically linked to the data in row11.
However when I group the data by year (i.e. clicking the "-" figure) the graph also changes.
I haven't deleted the data so don't understand why the graph data is changing.
excel graph help.xls
I have been trying to chart temperature differences over 10 day's time for six cities using a line graph. For some reason, the lines are all clustered at the bottom of my graph, with values of 0. My spreadsheet is accurate, without any blank cells. I'm using Excel 2010.
View 1 Replies View RelatedI have an excel document that looks all nice and pretty except for the little white grids all over it with unused cells. Is there anyway to hide the lines? i dont care that the cells are there just the lines make the form look kinda crappy.
View 4 Replies View RelatedI want to add a user-form on a chart, which will have check-boxes that will allow me to select series(lines) that I want see and compare in a chart. Currently my line chart has 24 series (Lines) which makes the chart very difficult to view and looks very busy. How do I add list of check-boxes that will allow me to select one or multiple lines that I want to see at a time?
View 2 Replies View Relatedthe sheet name is made by a inputbox in sub a()
in this way i make all my sheets with some data in it
afterwards, i run sub b() that does some calcs in each sheet and i want each time a graph in it (not in seperate graphsheet)
How can I make a panel data graph I have 40+ observations and 500+ individuals. I would like to make an excel graph that can display changes over time for each individual.
View 1 Replies View RelatedI've two collumns, after some index the values of cells are zero
how i can draw a chart without selecting those zero cells?
Is there a way to make the bar on a vertical column bar graph increase in height gradually over a couple of seconds rather than jumping from one height to the next height instantly.
eg:
if a vertical bar graph is reading data from cell b5, and b5 currently reads as 46, if b5 then changes to (let's say) 58, I'd like the column bar graph not to instantly change from a height reflecting the 46 to a height reflecting 58, but to slowly rise, showing the transition from 46 to 58.
This is how my pivot table would look like to start. Over time I would refresh and more things will be added. I want to make a Pie chart, and everytime I refresh the Pivot I want the Pie to get updated.
[IMG][/IMG]
BUT I want to do this on a separate tab. So basically I want to do a Vlookup of sorts. Where all the Fruit items are pulled and automatically updated when I refresh the Pivot. Then I would do the same for Veggies.
Using Excel 2007.
I have some connector lines that cross over tables in Columns G:K that are connecting tables in $D to tables in $M
How can I make the part of the connector line in $G:$K invisible?
something like:
Code:
Sub FormatConnector
Dim oConnector as Shape
With oConnector
If .Connector Or .Type = msoLine
If .Connector In Columns($G:$K) Then
.Connector.Segment.Visible = False
End If
End If
End with
End sub
I'm trying to make a line graph with specific increments on both the x and y axis. Now, I can make specific increments on one, but have to sacrifice the other in order for me to label the lines. Im not sure how to get around this. I'll just type out what i'm trying to do and maybe you smart people can help me here.
Okay, both the x and y axis must be in increments of 8,10,12.5,16,20,25,30, and 35.
The first line should be labeled "Indicated magnification, and should have the values 8,10,12.5,16,20,25,30, and 35... the same as the x and y values, making the line a straight linear line.
The second line should say "actual m value" and have values of 10,12.5,15.5,20.5,25,31,37.5, and 44.
The third line should say "actual n value" and have values of 10,13,16,21,26,32,38.5, and 45.
I have been given a task to create a line graph who has 10 categories and each category has 5 different values. I need to plot a line graph, so that those 10 categories should appear on the Y-axis instead of X-axis.
I am using Excel 2010.
Is there a way to make multiple charts off of 1 big data sheet. Sounds easy but there is more.
Sheet name is Field
Column A is Name ( about 40 different names)
Column B is Date (x axis primary and secondary)
Column D is Oil (y primary axis)
Column G is Water (y primary axis)
Column E is Gas ( y secondary axis)
Column M is MCFE (y secondary axis)
There is about 2-3 thousand rows, updated monthly. I need to make a graph by each well name.
1) can I make multiple graphs that can just look at the "field" sheet and then breakout just the 1 well name that shows up on the chart sheet that I create
I've tried pivot charts but you can't have secondary acess because it resets every time.
Basically, make multiple charts that will graph the data of a specific name in column A
I have 5 different groups for that i have to make XY scatter graphs and my data looks like this
XY
125
13
156
145
134
234
248
260
2102
2105
3125
3148
3198
3298
3245
4386
4369
4234
4465
4898
5902
5907
5345
5234
5209
now i want to make 5 different graphs one per each group. Now i am making them manually in excel but it is taking lot of time to format each graphs to get unique graphs. I am attching sample file and graph for better understanding.
I have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.
"Invalid procedure call or argument"
I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.
I have a spreadsheet on sheet 1 with a list of customers and their information. So on column A I have the customer number (i.e. k968, e37, p528,...), on column B i have the customer's name, on column C the street's name, on Column D the house number, on column E the zip code and finally the city on column F.
Right now there are around 600 customers in this list.
I have made a userform with a combobox in which I want to select an existing customer (pulled from the spreadsheet). On the same userform I have textboxes (customer number, name, street, number, zip, city). When I select a customer in the combobox, I want this customer's info to show up in the textboxes. I want to be able to change the info and hit Next to store the changes in the spreadsheet. When I do not select a customer from the combobox, I want to add new info in the textboxes and hit Next to store this info as a new customer. The userform also has a delete button. Then I select a customer in the combobox, this customer (and it's info) should be deleted from the spreadsheet when i hit Delete. So the spreadsheet is variable in length.
I want to use a line graph to display an amount over time - that's the easy part. On the other hand, I would like to have to group the lines based on a value.
A short example:
Imagine you own 3 different stores and you're selling oranges. So your table looks like this:
http://img179.imageshack.us/my.php?image=orangeshm4.jpg
Now I'd like to have one graph (3 different graphs won't work as the rows increase -I need to select the whole column as data source):
Date on the x axis,
Oranges sold on the y axis,
and one line per store (e.g. a green one for store A, a red one for B and a blue one of C, doesn't matter).
I need to figure a way to make to cells with dates equal each other if the
day,month and year are the same but are placed into a cell at different times during the day. "Making Date Now () = (06/29/09) In another cell". Therefore, A1= Now() and E11 = 06/29/09
I have a sheet which looks a bit like this
Day
A
B
Day
Cost A
Cost B
[Code]....
For each column with a header A, B (these are people), 1 in their column represents they works that day on a project. The day columns are days of the week, and people cost different amounts on different days. I need to work out the total cost for each person for the working period.
The cost for the first day for person A is =if(b2=1,vlookup(a2, f2:h8, 2),0)
How do I sum the costs for each day in a single formula without creating a cost per day column for each person i.e. sum each line of vlookups?
I have two rows of data, each row also have similar data. I need to find the number of matches that the two lines For example :
7,7,K,A,8,7
K,6,7,7,A,9
To reach the conclusion I need to build six such functions:
=1*(COUNTIF($A$65:$F$65,A66)>=COUNTIF($A66:A66,A66))
=1*(COUNTIF($A$65:$F$65,B66)>=COUNTIF($A66:B66,B66))
=1*(COUNTIF($A$65:$F$65,C66)>=COUNTIF($A66:C66,C66))
=1*(COUNTIF($A$65:$F$65,D66)>=COUNTIF($A66:D66,D66))
=1*(COUNTIF($A$65:$F$65,E66)>=COUNTIF($A66:E66,E66))
=1*(COUNTIF($A$65:$F$65,F66)>=COUNTIF($A66:F66,F66))
The result is 4
Is there a single formula that will give the result ?
Another question, is there a formula that I can compare to the principle of one line against the 20 lines ?
i have a list of about 2,000 rows of text going down vertically, but out of that 2,000 there's only about 1,500 actual items - the rest are duplicates.
how would i go about eliminating the duplicate strings of text quickly?
I need a msg to pop up when a worksheet opens. Pretty simple:
Private Sub Workbook_Open()
If MsgBox("My msg goes here!") Then
Exit Sub
End If
End Sub
But I need to be able to have multiple lines, maybe a short paragraph.
How do you get it to allow additional lines?