the sheet name is made by a inputbox in sub a()
in this way i make all my sheets with some data in it
afterwards, i run sub b() that does some calcs in each sheet and i want each time a graph in it (not in seperate graphsheet)
I would like to make a scatter graph that will graph the attached. The score would be on the Y axis and the birth date would be on the X axis. This is simple to do by itself but what I would like to do in addition to this is to have the top 25% of the scores a single color, the middle 50% of the scores a second color and then the bottom 25% of the scores to be a third color. And if it is possible to have the ID visible when you move your cursor over a given dot in the graph. Currently when I make a scatter graph the X,Y coordinates show when I hoover the cursor over a dot.
View 7 Replies View RelatedHow can i make a graph that will graph against time? lets say i have a bank balance like this:
1/2/2000 $500
1/3/2000 $600
3/12/2000 $400
there may be more than one entry on any one given day, or there may not be an entry for 2 weeks. How can i graph the running balance in a way that it will show the timeline just as a calendar year(or however long i selected) and the points are plotting according to their date, not just equally spaced out.
Here is a screenshot of my problem: [URL]
I made a graph with thousand of points, but the lines which make the curves are too thick and so I can't see exactly where they intersect. I would like to make them thinner.
How can I make a panel data graph I have 40+ observations and 500+ individuals. I would like to make an excel graph that can display changes over time for each individual.
View 1 Replies View RelatedI've two collumns, after some index the values of cells are zero
how i can draw a chart without selecting those zero cells?
Is there a way to make the bar on a vertical column bar graph increase in height gradually over a couple of seconds rather than jumping from one height to the next height instantly.
eg:
if a vertical bar graph is reading data from cell b5, and b5 currently reads as 46, if b5 then changes to (let's say) 58, I'd like the column bar graph not to instantly change from a height reflecting the 46 to a height reflecting 58, but to slowly rise, showing the transition from 46 to 58.
This is how my pivot table would look like to start. Over time I would refresh and more things will be added. I want to make a Pie chart, and everytime I refresh the Pivot I want the Pie to get updated.
[IMG][/IMG]
BUT I want to do this on a separate tab. So basically I want to do a Vlookup of sorts. Where all the Fruit items are pulled and automatically updated when I refresh the Pivot. Then I would do the same for Veggies.
I'm trying to make a line graph with specific increments on both the x and y axis. Now, I can make specific increments on one, but have to sacrifice the other in order for me to label the lines. Im not sure how to get around this. I'll just type out what i'm trying to do and maybe you smart people can help me here.
Okay, both the x and y axis must be in increments of 8,10,12.5,16,20,25,30, and 35.
The first line should be labeled "Indicated magnification, and should have the values 8,10,12.5,16,20,25,30, and 35... the same as the x and y values, making the line a straight linear line.
The second line should say "actual m value" and have values of 10,12.5,15.5,20.5,25,31,37.5, and 44.
The third line should say "actual n value" and have values of 10,13,16,21,26,32,38.5, and 45.
I have been given a task to create a line graph who has 10 categories and each category has 5 different values. I need to plot a line graph, so that those 10 categories should appear on the Y-axis instead of X-axis.
I am using Excel 2010.
Is there a way to make multiple charts off of 1 big data sheet. Sounds easy but there is more.
Sheet name is Field
Column A is Name ( about 40 different names)
Column B is Date (x axis primary and secondary)
Column D is Oil (y primary axis)
Column G is Water (y primary axis)
Column E is Gas ( y secondary axis)
Column M is MCFE (y secondary axis)
There is about 2-3 thousand rows, updated monthly. I need to make a graph by each well name.
1) can I make multiple graphs that can just look at the "field" sheet and then breakout just the 1 well name that shows up on the chart sheet that I create
I've tried pivot charts but you can't have secondary acess because it resets every time.
Basically, make multiple charts that will graph the data of a specific name in column A
I have 5 different groups for that i have to make XY scatter graphs and my data looks like this
XY
125
13
156
145
134
234
248
260
2102
2105
3125
3148
3198
3298
3245
4386
4369
4234
4465
4898
5902
5907
5345
5234
5209
now i want to make 5 different graphs one per each group. Now i am making them manually in excel but it is taking lot of time to format each graphs to get unique graphs. I am attching sample file and graph for better understanding.
I am trying to take the tables you will see in the dummy page on the second and third sheet and have them output onto the first sheet based on the parameters of the drop down menus. Is there a way to have a button on the first page that controls a macro to do this?
View 4 Replies View RelatedIn my database I am often inserting a new row in between two rows of data and then entering information across 8 cells. I have to manually enter all of the same information on sheet 2, again between two rows that already have data. Is there a macro or formula that would work so that I don't have to enter it twice?
View 5 Replies View Relatedi dont know if there is a way around this, i have a sheet, it has one large sheet with hundreds of rows under 3 headings, and i have a group on each of these so people can go in and expand their section and add details, i have a second sheet that contains some graphs simplifying the data collected in the 3 sections of the other sheet..
but i have just noticed when a section of the sheet is grouped its details are removed from the graph.
is there any way around this? i need the groups on as the sheet is so big and people do not want to be scrolling through other area's data when they can just expand their own.
I downloaded a Mileage Log Template. I made 1 sheet for March 2013, I want to make another sheet for April, May, June, etc. How do I make the sheets all the same, i.e., the same format with the same cells and everything else?
View 3 Replies View RelatedI want to create a dynamic line graph using week and year numbers stated in another sheet.
e.g.
Start Year - 2012
End Year - 2014
Start Week - 3
End Week - 12
The top 2 rows above my graph data are as below:
Year - 2012 2012 2012
Week - 5 6 7 etc.
This works fine if the start and end year are the same but if it's greater than one year, it doesn't recognise that.
Excel 2010 and the camera function.
I have been using it to take a picture of a graph, pasting to an alternative sheet within the same workbook, and renaming the picture by a defined name. S by selecting the names from a drop down list the picture will select various different sized graphs defined within my drop down.
What I am experiencing is when I initially do this the pic works great and resizes automatically with each selection, however the next day some of the pictures resize and some do not.
Is this a glitch within excel or am I missing a setting which will resolve this?
Is it possible to be able to type a name of a person and have there details appear on the page . i.e in my example in the (search worksheet) i would like to type in a name say C.G( all names will be longer ) and have all the row A7 from sheet A zone to appear in this sheet.this name could be random.Changes with people i need to assess and show individual results to.
View 4 Replies View RelatedI am making a sheet to track the daily cycles of a machine. I need to get the information from the "meter reading" column to populate in the " cycles recorded" cell. I'm very new to this and need a formula to use to track the changes in column D on the attached sheet that will populate changes in cell D4.
Cycles counts.xlsx
I need to write a macro that will create a new sheet called "Export Format" and it's A Column needs to be exactly the same as the A Column in another sheet called "Master". I'v been trying to look it up since I have never used VB before, but my boss needs this done soon so i thought I'd ask. This is just a small part of what i need to do but I think it will give me the start I need.
View 2 Replies View RelatedI found sheet code on the forum that highlights the both the entire row and column when a cell is selected.
This is great, but is there a way I can make this an add-in so it is easily available in all workbooks and sheets?
I am working on a Workbook for my wife to use at school. It's basically a grade-book that automatically fills out the report card for each kid. In column A I have a list of each student's name. I also have those hyper-linked to each sheet for easy access.
I would like to be able to change the names in column A on Sheet 1 and it also change the names on the corresponding sheet it is hyper-linked to. I have seem some similar post but I can't seem to get any of those formulas to work. I get an invalid sheet name error. Maybe I'm not inserting the code properly or it has something to do with my hyperlinks. This is driving me crazy not being able to figure this out. I just want to make it as simple and easy for her to use year to year.
Some of the sheets in my spreadsheet contain some data and graphs with a few macros that are run when a button is pressed. At the bottom I have some comments with a macro that is run to timestamp when these comments are updated or edited.
What I would like to do is lock the entire sheet so that the data and graphs can't be tampered with, apart from the comments part at the bottom because I'd like to be able to have the comments editable. So far I have managed to do that, but when I edit a comment and the timestamp code is run it creates a run-time error 1004. I could just remove the timestamp code I guess but I'd like to keep it there... figuring that there must be a solution.
How can I work around this problem ? Either by being able to keep the sheet locked and still have the timestamp code run, or have it temporarily unlock the sheet - run the code - and then re-lock the sheet.
I want to take the values in Column U, attach the names in Column A, and rank from Highest to Lowest
Then I want to do the same with Column V/Column A
And then again with Column W/Column A
And then create 3 tables within the document that display the top 5 in each category.
It's already done, but by hand. Is there a way to automatically set this up?
See A27-A32 for what I want done automatically
I have a work book with 4 sheets in it. Now i want to make a summery sheet for this.
View 2 Replies View RelatedI would like to create a list of all the sheet names I have in a given workbook. Is there a simple way to do this through VBA?
View 6 Replies View RelatedI want to create a macro that will allow me to create a set number of copies of a specific sheet within the workbook. I have one sheet within my workbook entitled "Tab". I want to create a macro that will ask me how many copies I want to create and then proceed to create all the copies. i.e.: select to create 4 copies, with the result being: Tab[original], Tab(2), Tab(3), Tab(4), Tab(5)
View 2 Replies View RelatedIs there anyway I can make it so that each individual sheet in my workbook has a different password?
View 9 Replies View RelatedI would like to run a calculation based on selected active range in sheet. I tried several methods and cannot make it work.
View 2 Replies View Related