# Make Multiple Charts That Will Graph The Data Of A Specific Name In Column

Aug 5, 2008

Is there a way to make multiple charts off of 1 big data sheet. Sounds easy but there is more.

Sheet name is Field
Column A is Name ( about 40 different names)
Column B is Date (x axis primary and secondary)
Column D is Oil (y primary axis)
Column G is Water (y primary axis)
Column E is Gas ( y secondary axis)
Column M is MCFE (y secondary axis)

There is about 2-3 thousand rows, updated monthly. I need to make a graph by each well name.

1) can I make multiple graphs that can just look at the "field" sheet and then breakout just the 1 well name that shows up on the chart sheet that I create

I've tried pivot charts but you can't have secondary acess because it resets every time.

Basically, make multiple charts that will graph the data of a specific name in column A

## To Make A Line Graph With Specific Increments On Both The X And Y Axis

Oct 16, 2008

I'm trying to make a line graph with specific increments on both the x and y axis. Now, I can make specific increments on one, but have to sacrifice the other in order for me to label the lines. Im not sure how to get around this. I'll just type out what i'm trying to do and maybe you smart people can help me here.

Okay, both the x and y axis must be in increments of 8,10,12.5,16,20,25,30, and 35.

The first line should be labeled "Indicated magnification, and should have the values 8,10,12.5,16,20,25,30, and 35... the same as the x and y values, making the line a straight linear line.

The second line should say "actual m value" and have values of 10,12.5,15.5,20.5,25,31,37.5, and 44.

The third line should say "actual n value" and have values of 10,13,16,21,26,32,38.5, and 45.

## Make Bar On Vertical Column Bar Graph?

Feb 20, 2012

Is there a way to make the bar on a vertical column bar graph increase in height gradually over a couple of seconds rather than jumping from one height to the next height instantly.

eg:

if a vertical bar graph is reading data from cell b5, and b5 currently reads as 46, if b5 then changes to (let's say) 58, I'd like the column bar graph not to instantly change from a height reflecting the 46 to a height reflecting 58, but to slowly rise, showing the transition from 46 to 58.

## How To Make A Panel Data Graph

Mar 21, 2013

How can I make a panel data graph I have 40+ observations and 500+ individuals. I would like to make an excel graph that can display changes over time for each individual.

## Make A Scatter Graph That Will Graph The Attached?

Mar 21, 2014

I would like to make a scatter graph that will graph the attached. The score would be on the Y axis and the birth date would be on the X axis. This is simple to do by itself but what I would like to do in addition to this is to have the top 25% of the scores a single color, the middle 50% of the scores a second color and then the bottom 25% of the scores to be a third color. And if it is possible to have the ID visible when you move your cursor over a given dot in the graph. Currently when I make a scatter graph the X,Y coordinates show when I hoover the cursor over a dot.

## Group Column Bars In Graph With Specific Sorting?

Jan 7, 2014

I'm trying to figure out a way to group columns in a bar graph without displaying them in a cluster, but instead in displaying them individually in a specific order. However, I still want to identify each group with a different color. This is hard to describe, so I'll try my best to illustrate what I'm trying to do with an example. Assume I have three groups of data and within each group I have 2 to 3 items in it with different values. In a list the data would look like this:

Group 1 - Item 1 - \$2,000
Group 2 - Item 2 - \$1,100
Group 1 - Item 3 - \$2,200
Group 1 - Item 4 - \$3,200
Group 3 - Item 5 - \$1,800
Group 2 - Item 6 - \$1,200
Group 1 - Item 7 - \$2,500
Group 3 - Item 8 - \$2,800

What I want to do is create a bar graph that will still allow me to color all group 1 items as red, all group 2 items as blue, and all group 3 items as green while still showing each bar sorted in the order I've shown above and labeled as items 1 through 8. Then, I want a legend to only show the groups 1 - 3 with their colors. To explain, the graph would look like this:

Bar 1 would be labeled as Item 1, with a value of \$2,000, and colored red
Bar 2 would be labeled as Item 2, with a value of \$1,100, and colored blue
Bar 3 would be labeled as Item 3, with a value of \$2,200, and colored red
Bar 4 would be labeled as Item 4, with a value of \$3,200, and colored red
Bar 5 would be labeled as Item 5, with a value of \$1,800, and colored green
Bar 6 would be labeled as Item 6, with a value of \$1,200, and colored blue
Bar 7 would be labeled as Item 7, with a value of \$2,500, and colored red
Bar 8 would be labeled as Item 8, with a value of \$2,800, and colored green

Then, the legend would only show the groupings of Group 1, 2, 3, 4 and their associated colors.

(By the way... I know I can do this manually by selecting each bar and customizing the color, but I want an automated way of doing this to reduce maintenance time)

## Make A Graph That Will Graph Against Time

Jun 11, 2006

How can i make a graph that will graph against time? lets say i have a bank balance like this:

1/2/2000 \$500
1/3/2000 \$600
3/12/2000 \$400

there may be more than one entry on any one given day, or there may not be an entry for 2 weeks. How can i graph the running balance in a way that it will show the timeline just as a calendar year(or however long i selected) and the points are plotting according to their date, not just equally spaced out.

## Changing Multiple Column Graph Sizes All At One Go

Mar 26, 2014

I have hundreds of column graphs, how do I quickly change the size of them to the exact same size of 8.1cm height and 26.4cm width.

## Graph The Following Data In An Area Chart With Line Charts Superimposed On The Area Chart

Nov 1, 2006

I am trying to graph the following data in an area chart with line charts superimposed on the area chart. I have a lot of data (and a lot going on) so I'm trying to figure out the best way to show this in excel from a functional standpoing (i can't get this to work in excel!!) to also an asthetic standpoint (dont want it to look terrible or illegible). This is what I'm trying to chart:

1) Weather data (temperature) by region:
So one region, would be: Northwest
I would like the "area" (so a shaded region) to be the min/max of the temperature data for each month.

2) I would like to show the temperature for each year as a line graph on the chart - so you can see if a year falls in or out of the shaded region.

3) I would like to show a company's sales increases across the same months per year as separate line charts. I may choose to just show the biggest outlier year in the end... or to show 2006 (the latest data).

What I am trying to convery with the chart is that the company's sales is or is not tied to weather deviations. I have attached an excel file with the data. I haven't been able to use the area chart or get a two axis chart to work or get it to look even remotely professional.

## Make A Distance Between Charts?

Sep 21, 2013

I wrote a code to make all my charts and it made but all charts stocked together

P.S : "The red part in this code is my try to make a distance(space) between charts but it doesn't work"

Code:

For u = 1 To o
ActiveChart.SetSourceData Source:=Sheets("sheet1").Range(crgf(u), crgl(u)), PlotBy:=xlRows
ActiveChart.SetElement (msoElementDataTableWithLegendKeys)[code].....

## Macro To Extract Data From Specific Column To New Sheets Specific Column?

Jun 14, 2013

I'm trying to find a way to use a macro to extract data from a specific column from Sheet1 based on the columns header/title and copied into Sheet2 into the respective column with matching header/title.

For instance, in Sheet1:

Chicken
Cow
Donkey
Pig

[Code]....

So the above table would be the result i'm aiming for.

NOTE, its not different workbooks. I'm looking for sheet to sheet macro.

I've attached a file as well if someone wants to have a go at it. There are no codes in it.

## How To Make Bridge Charts Waterfall

Feb 4, 2014

I have a data and did not know how to create a bridge charts.

## Charts - Make Second Axis Series Always Appear Above

Sep 10, 2012

I have a combination column and line chart with the line series on the secondary axis. Is there a way that I can tell excel to scale the secondary axis so as the line always appears above the columns? As it is it appears above in most instances but sometimes appears below the columns.

## Create Multiple Graphs/Charts From Data Groups

Jun 26, 2008

I need to make a macro that creates a specified number of graphs depending on the file's number of data sets. I know the number of sets that are in the data, and I know the number of data points that were taken. Here is what I have:

Sub Graphs()
Dim Startpoint As Integer
Dim Endpoint As Integer
Dim count As Integer
Dim xStart As String
Dim xEnd As String
Dim NumberSets As Integer
Dim yStart As String
Dim yEnd As String
Dim DataSet As Integer
Dim Data
Startpoint = 11 'The first set always starts in row 11
Endpoint = Range("L4").Value + 10 'Thefirst set always ends after the value of L4+10
NumberSets = Range("L7").Value 'number of times I need the loop to work
count = 1..........................

## Create Line Graph That Will Incorporate Multiple Columns Of Data In One Series Of Data

Sep 27, 2011

I am trying to create a line graph that will incorporate multiple columns of data in one series of data. The reason I do not place all of the data in one column is because it could exceed the maximum amount of rows allowed in excel. Also I need the data split up for viewing purposes.

I can easily just graph one column but how do I combine all the columns into one line graph with the data being in separate columns. Basically all the columns will be my Y values and X values are just 1:n.

Example Below:

Column AColumn B Column C159261037114812

Now in the example all of the values are x values.

## Make Graph In Each Sheet

Jul 24, 2006

the sheet name is made by a inputbox in sub a()
in this way i make all my sheets with some data in it

afterwards, i run sub b() that does some calcs in each sheet and i want each time a graph in it (not in seperate graphsheet)

## Multiple Data Tables On A Single Graph?

Dec 9, 2011

I am trying to plot multiple tables on the same line chart in Excel 2007. I have a list of X and Y values for Table 1, Table 2, Table 3 etc.

However the size of the tables are not the same for each table. For example, Table 1 might have 200 X and Y values, Table 2 might have 175 X and Y values, Table 3 might have 105 X and Y values, etc.

So when I plot these data tables on one line chart the individual plots are off center. They should all be centered at 0.

## Graph With Source Data On Multiple Lines

Apr 3, 2007

I have an excel worksheet that contains two sets of data. These numbers are then plotted onto a line graph to show the two sets of data against each other.

The graph is working fine, but only for a specific amount of data. The data is split into mutiple lines. From cells A1 all the way to BI1 is one row. I then have information in A4 to BI4. I would like to plot this information on a graph as a single continuous line. Is this possible?

Basically, My graph source is currently =Data!\$A\$2:\$BI\$3. This gives me two lines that I want. How do I get the data from A4:BI4 to join up to the first line in the graph.

## How To Make Lines Thinner In A Graph

May 21, 2014

Here is a screenshot of my problem: [URL]

I made a graph with thousand of points, but the lines which make the curves are too thick and so I can't see exactly where they intersect. I would like to make them thinner.

## Make A Graph Without Plotting Zero Values

Oct 22, 2008

I've two collumns, after some index the values of cells are zero
how i can draw a chart without selecting those zero cells?

## Adding Incremental Data To Column Graph?

Jun 18, 2014

Anyway, I have a column graph that shows company totals on the left, in three columns, and sub-group totals to the right. These columns represent Revenue Targets (Blue), and current projections (Red) as of the current time. Ignore the green column. I would like to add incremental amounts to the Red column weekly, as the projections change. So I want to show an increment on top of the red column.

So if LG picks up 100 of additional revenue, I want to show the increment of 100 on top of the 2000 that is there, using a different pattern or cross-hatch.

## Pivot Table And VLookup To Make Graph?

Feb 25, 2012

This is how my pivot table would look like to start. Over time I would refresh and more things will be added. I want to make a Pie chart, and everytime I refresh the Pivot I want the Pie to get updated.

[IMG][/IMG]

BUT I want to do this on a separate tab. So basically I want to do a Vlookup of sorts. Where all the Fruit items are pulled and automatically updated when I refresh the Pivot. Then I would do the same for Veggies.

## Insert Row Into Column Of Data And Automatically Update Graph

Oct 16, 2011

A colleague recorded this macro to insert a row into a column of data which a graph is plotted from to automatically update the graph each time more data is added. I can't figure out how to simplify the VBA and stop it adding a row on row 57 rather than the bottom of the graph.

Code:
Sub Button1_Click()
'
' Button1_Click Macro
'
'
Rows("56:56").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Range("B57:F57").Select

[Code] ........

## Excel 2010 :: How To Make Line Graph With Categories On Y-axis

Jun 26, 2014

I have been given a task to create a line graph who has 10 categories and each category has 5 different values. I need to plot a line graph, so that those 10 categories should appear on the Y-axis instead of X-axis.

I am using Excel 2010.

## VBA Needed To Make Separate XY Scatter Graph For Each Group At A Time And Must Be Unique

Aug 19, 2014

I have 5 different groups for that i have to make XY scatter graphs and my data looks like this

XY
125
13
156
145
134
234
248
260
2102
2105
3125
3148
3198
3298
3245
4386
4369
4234
4465
4898
5902
5907
5345
5234
5209

now i want to make 5 different graphs one per each group. Now i am making them manually in excel but it is taking lot of time to format each graphs to get unique graphs. I am attching sample file and graph for better understanding.

## If Column Contains Data Then Insert A Blank Column And Shift Specific Column To The Right

Apr 22, 2009

What I'd like to do is; If column C contains data then insert a blank column and shift column C to the right.

## How To Make Filter On Data Column By Using Value

May 1, 2012

I have 2 date values in excel spreadsheet ( i must use it by the sheet) and i want to flter table by the date column and AutoFilter, when the start date and the end date will be taken from the sheet itself.

but when i defined date variable like starta and edit the filter (Criteria1:=">=starta") it didt work (the value was starta and not the date in the starta) how to edit it?

sub abcd
Dim starta As Date, enda As Date
starta = Worksheets("periods and options").Range("a1").Value
enda = Worksheets("periods and options").Range("b1").Value
Sheets("DATAF").Range("a1:p1325").Select
Selection.AutoFilter Field:=1, Criteria1:=">=starta", Operator:=xlAnd _
, Criteria2:="

## Find Last Row Of Data For Column F And Make Format Changes

Oct 26, 2011

I need to find the last row of data where there is data in Column F. I then need to select from that row the cells that pertain to A, B, C, D, E, F, G, H, I, J, K, L, & M and then be able to make format changes like increase font size.

I also then want to select A in that same row and put the word Total.

## Color Column Charts Based On Font Color Data Cells

Oct 27, 2009

I have attached the relevant spreadsheet for which I need to alter the color of the columns based on Site number ( Sheet 1). % Mortality will be represented in the Y-Axis, and the Site numbers would be on the X-Axis. All columns (% Mortality) except one will be of the same color, and the one of a different color will indicate a specific site. As an example, site 86 is colored differently. The way I require the chart to look is shown on Sheet 1.

After reading through some great posts on Ozgrid, I managed to do this using conditional formatting (Sheet 2), but that sort of falls short because I am required to add a data table to the chart, and the parameter that is indicated by the column bars happens to appear twice in the data table.

I was wondering if this can be automated maybe using VBA, but with the possibility of simply matching the color of columns with the font color of respective entry in the data series.

## Splitting Files Into Multiple Workbooks On The Basis Of Specific Column?

Jul 6, 2014

I have excel data file where the code can split the data into different xls file on the basis of country for first sheet only.

execute the code so as to create single country wise files for all sheets. i.e. file consisting of data with sheet A1,B1,C1. The present code works only for sheet A1 and it creates different files with data related to that country. I was looking for the output file with B1 and C1 as well for that country. Also new output file needs to be renamed just as of original one.