How To Skip Hidden Column Cell Value Count

Jul 15, 2014

I have few column values to count. I don't want the hidden column value. In that formula the hidden value also counted. How to ignore that hidden column value count, using macro/formula.

eg:
col A - col B - col C - col D - col E - col F
Task -- ok1 -- ok2 -- no1 --- ok3 -- ok4

Col D should be hidden. Final count result should be: OK = 4; No=0

View 3 Replies


ADVERTISEMENT

How To Select Range And Skip Over Hidden Columns

May 1, 2014

I have below a code that is selecting from A11 down as far as there is data and across a certain number of columns then sets a print area.

Currently the columns go A, B, JW, JX, JY, JZ, KA, KB as C through to JV are hidden. I have tried to offset the columns by 7 to see if it will select A-KB but it is selecting cells that are hidden and only selecting A-G. I need it to go past the hidden columns. Here is the code:

[Code] ......

Could I also get a code to go from A10 and move over to KB and create a range from there e.g. KB-KJ and last row from there?

View 10 Replies View Related

Count In A Range If Cell Contains Time Value (skip Numeric Values)

Jun 11, 2013

I'm looking for a way to count the cells in a specified range if the cell contains a timevalue (such as: 0:05 or 1:15). When a cell in the same range contains a normal value (such as: 1 or 20) it should not be counted.

What formula should i use for this?

I was experimenting with:

=CountIF(N4:N50,">TIMEVALUE(0:01)")
and
=CountIF(N4:N50,">TIME(0,0,1)")

But both don't seem to work.

View 3 Replies View Related

Using Count If But Skip Columns

Jan 20, 2010

I use the formula below to sum hours in a spreadsheet:

=((((SUM(B6:AP6)+(COUNTIF(B6:AP6,"x")*12.5))+(COUNTIF(B6:AP6,"d")*12.5))+(COUNTIF(B6:AP6,"m")*12.5)) +(COUNTIF(B6:AP6,"e")*6))

I would like to be able to change the range from "B6:AP6" to something which will start with B6 but only count every 6th cell up to AP 6. I could probably place a symbol at the top of each column I wish to count if needed. If I try to simply choose every sixth cell I get an error about too many arguments for the countif function The above formula is used to add hours for various shifts (symbolized by letters). For my current need I do not need the multiplier i just need to count how many of each letter appear in every sixth cell of a row.

This may be too fancy but if one formula would work to count every 6th cell starting with B6 and give me a sum , then automatically do the same starting with B7 and count every 6th cell etc...that would be great. I am trying to sum the number of each occurrences of each shift at each of 6 locations.

View 4 Replies View Related

Skip Any Blanks Rather Than Count Them In The Average

Jan 16, 2007

I want to figure a class average for a test, but I have students that have moved. My Excel is automatically counting them as a zero. How can I program/tell Excel to skip any blanks rather than count them in the average?

View 9 Replies View Related

Last Cell Used In Column When Rows Are Hidden

Apr 14, 2007

1. find the last cell used in a column when the rows that contain the data are hidden. I tried using Range("A65536").End(xlup).Select. but when the rows are hidden it doesn't give me the last cell used.

2. I am trying to restrict my search to just one row. When I try using the cells.find function it looks for the whole sheet but I just want it to search for some particular data in just one row or a specified range.

View 2 Replies View Related

Count And Select Outcomes, Skip Duplicates

Oct 27, 2009

This code counts all cells with a value from column B1:B:10, C1:C10, D1:D10, E1:E10, F1:F10, G1:G10 and H1:H10. And then give the cells of the 3 lowest outcomes a blue backcolor. The problem is that the code also colors any duplicate outcomes. How can I let the code skip any following duplicate outcome(s)?

View 2 Replies View Related

Change Active Cell Value In Hidden Column

Apr 11, 2007

The attached sample workbook has a listbox of areas in a userform. The Textbox on the user form is so that the user can edit the Area names in the listbox. The userform functions fine as long as the column that contains the area name is not hidden. What I want to be able to do is edit the Area Names using the Textbox with the area name column hidden.

View 2 Replies View Related

Add X Days To Dates, For Criteria Count, But Skip Weekends

Feb 28, 2008

I am trying to compile a count of dates using a numerical reference which adds x consecutive dates onto the initial start date based on the number in a cell.The dates added cannot fall on a weekend.

The start date for each calculation begins in D4 with the corresponding number of days to add onto this date in K4. In the example below 8/11/2007 -- 2 means that the 8th and 9th of Nov get one added to their count. As the next row also has 9th Nov as a start date one more is added to 9th Nov. As the 10th and 11th were a weekend they are skipped and the count starts again from the next Monday. I have enclosed a simplified worksheet with some sample data.

Example:

D4 --------- K4
8/11/2007 -- 2
9/11/2007 -- 3

Expected output:

AE4---------AF4
8/11/2007 -- 1
9/11/2007 -- 2
12/11/2007 --1
13/11/2007 --1

View 5 Replies View Related

Sort Column To Match Pair In Other Column, Skip Blank Spaces

Mar 28, 2007

Here's what I have.. (on a much smaller scale)

http://www.jmetenterprises.com/produ...pics/excel.jpg

(notice how the lines that match are now even.)

[Edited by admin~ *Link* to large images, don't display them]

View 9 Replies View Related

How Do I Count Non-hidden Rows

Nov 19, 2006

I need a formula for counting rows. It should achieve the following;

It should count in increments of 1 (1,2,3,4, etc.) in each cell in a column (column AW, to be prescise).

It should skip hidden rows.

It should account for the fact that a formula is able to reveal rows and when this is
done, the counting formula should adjust to count the newly revealed row.

It should also be able to do the opposite - another formula/macro hides rows, and when this happens it should not count the newly hidden row.

I can imagine a formula in each cell of the column that says "Check the previous column and if it is visible, add 1. If a hidden row is encountered, do not add 1. When a non-hidden row is encountered again, continue adding 1."

View 9 Replies View Related

Count Hidden Rows

Mar 21, 2007

i count number of all rows with:

Dim countall As Long
countall = Sheet1. Range("a1", Sheet1.Range("A65535").End(xlUp)).Rows.count

this is the total of all rows, including hidden. how do i count the hidden rows which have been filtered?

preferably not a loop, isn't there a way to use "entirerow.hidden" and count that?

View 5 Replies View Related

Subtotal To Count Non-hidden Columns?

Mar 25, 2014

I have a linear count from 1 to 160 (J3:FM3) and I hide columns manually over time depending on a certain criteria. However, I would like to count how many columns I have left. I believe you need to use the subtotal function, but I do not understand how to use it.

View 14 Replies View Related

Count Rows Excluding Hidden

Nov 28, 2012

Have several rows

Some have data some do not
Some rows are hidden (Hidden rows also may or may not have data)

I wish to only count how many rows are not hidden.

View 7 Replies View Related

Scrolling To The Right - Skip Every Fifth Column?

Apr 26, 2014

I want to return the value of E2 from sheet, "ALL INFO" and paste it in B2 on my current sheet. When I scroll this formula to right, I want the next to be the value of J2 from sheet, "ALL INFO," etc.

View 2 Replies View Related

Vlookup Using Skip Column

Jan 23, 2010

I have two excel sheets. One is databank & second is list. Our data in databank sheet.

sheet : databank
column a is : name
column b is : address1
column b is : address2
column c is : city
column d is : district

sheet : list

column a is : name
column b is : city
column c is : district

Now i want in list sheet : name match with city & district respectively relevent name.

View 6 Replies View Related

Conditional Count Excluding Hidden Columns

Jan 22, 2008

I was wondering if was possible to create a conditional calculation excluding hidden columns.

For example in C4:HA4 the cells may have a number of values L, S, U etc.

When a user access the spreadsheet certain columns a hidden based on comparing their PC user ID to an access list in the workbook.

What I would like to be able to do would be to count the instances of L in C4:HA4 but exluding the hidden columns.

I'd hoped I might be able to use SUBTOTAL in a similar way to Domenic came up with here:

=SUMPRODUCT(SUBTOTAL(9,OFFSET(C2:C100,ROW(C2:C100)-ROW(C2),0,1)),--(C2:C100

View 9 Replies View Related

Skip Column In Select Case

Jul 7, 2007

I've been through the forum and I've got my VBA to check that columns 37, 38
and 40 are entered if column 2 = 'O'. However I just can't get it to exclude column 39 from the check! Is there a way of getting Case Else to do this or should I use an Array?

Dim rCell As Range
Dim strMessage As String
Dim RowCounter As Integer
Dim ColumnsChecked As Integer

For Each rCell In Range("B14:B5000")
RowCounter = rCell.Row
If rCell = "O" Then
For ColumnsChecked = 37 To 40
If Cells(RowCounter, ColumnsChecked).value = "" Then
Select Case ColumnsChecked
Case 37
strMessage = "COMMENTS"
Case 38
strMessage = "INVOICE NUMBER"
Case 40............................

View 4 Replies View Related

Skip Column When Entering Data Via Userform

Aug 3, 2014

I have a spread sheet that is populated via a Userform. I have arrived at a problem where I don't know how to write the Code so as to Skip Column B i.e.

Column A Column B Column C Column D Column E Column F
Serial
ID
List of Activities
Owner
Environment
Planned
Start
Planned End

1
HQ DLC0001
Campaign Plan
HQ DLC
28-Feb-14
18-Jul-14

From the text Box I fill Serial, List of Activity, Owner Environment, Planned Start, Planned End.

Column B - ID - Is a unique ID that is created via a formula.

How can I add a line to the code below so that the User form skips Column B and only places the in putted data into Columns A, C, D, E and F.

VB:
Option Explicit
Dim id As Integer, i As Integer, j As Integer, flag As Boolean

Sub GetData()

[Code] ......

View 1 Replies View Related

Skip Column When Importing Text File

Sep 22, 2007

This question is mostly academic, but I do hope someone out there has an answer. I am using code to open a text file. Since the first column is always blank, I would like to start the import at column 2. I think this can be accomplished with the following

Workbooks.OpenText Filename:=sFileName, Origin:=437, StartRow:=1, DataType:=xlDelimited, _
FieldInfo:= Array(Array(1, 9))

However, according to VB help file,

If you specify that a column is to be skipped, you must explicitly state the type for all remaining columns or the data will not parse correctly.

I haven't seen any problems, but I hate to use code that isn't supposed to work, even if it does. Does anyone know what problems could be caused by not explicitly stating the type for the remaining columns? Question 2: (I know, one per thread, but they are very much related. I will move to new thread if need be). If I don't know the number of columns, how can I explicitly state their type? For example, if I knew I had 4 columns, I would use:

Workbooks.OpenText Filename:=sFileName, Origin:=437, StartRow:=1, DataType:=xlDelimited, _
FieldInfo:=Array(Array(1, 9), Array(2, 1), Array(3, 1), Array(4, 1))

What do I use for a variable number of columns?

The default type of 1 (xlGeneralFormat) is fine for all of my columns.

View 5 Replies View Related

Column Fill Colors In A Column Chart When Some Columns Are Hidden

Jul 13, 2014

When I hide columns in a column chart the different fill colors I used on specific columns no longer show up with the colors I originally had. Is there a way to maintain the proper sequence of column fill colors even when some columns are hidden?

View 1 Replies View Related

Skip Cell In Vba Macro

Jun 27, 2007

Sub BlankGcolumn()
Dim cl As Range
For Each cl In Range("B8", Range("B15").End(xlUp))
If cl.Value = "" Then
cl.Offset(0, 0) = cl.Offset(0, -1) & " " & cl.Offset(1, -1)
End If
Next cl
End Sub

in the "Next cl" part, i want it to skip the next cell and do the one after it.
Ive tired: ....

View 9 Replies View Related

Skip Empty Cell In Formula?

Jul 1, 2014

I want to make the formula: x=SUM(A * e^(-b*d)), wherein A and b are parameters and d the distance.

I've just over 10.000 rows and 15 columns (B4 to P10013) with distances. For each column i give a formula =$S$2*EXP(-$R$2*B4) and extent that for all colums and rows, then I sum all the columns. This works fine, except for the fact that when there is an empty cell the outcome is wrong. Because I set for example A as 10. The answer for that cell is 10, because he sees an empty cell as 0, i guess.

So how do I skip these empty cells?

View 5 Replies View Related

Macro To Skip Cell If It Equals A Value

Apr 24, 2013

I have a spreadsheet with a lot of account numbers. I want my Macro to highlight the row A:C if certain accounts are found in the spreadsheet.

For Example:

Account numbers "10998-0000" and "18999-0000" are allowed to be in the spreadsheet so don't want them highlighted. But Account "10110-0000" should be highlighted.

I know the Macro will be big but I was hopping something like:
If ActiveCell is not accounts .... I would then list all my account numbers... Then

and at the end a loop until ActiveCell is Empty.

I have this so far.

Range("A12").Select
MyColumn = 1
i = 12
Range("A" & i).Select

Do While ActiveCell.Value ""

[Code] ........

View 8 Replies View Related

If Cell Match Return Value If Not Skip Row

May 18, 2014

I have a product list and the products have different levels. I want to lookup and return the the rows with level C and return the article number and price. If the row has level A or B I want to skip to the next level C.

I want to use a formula or array formula and not a Macro.

Data
Article
Price
Level

KL507
56
A

[Code] .......

Expected result in other table

Article
Price

JK879
98

FJ893
98

RT344
23

View 4 Replies View Related

Column Hidden At All Times

Jan 22, 2010

is there a code to hide specific columns that i dont really need. i dont want to delete them, just hide them. even if i try to unhide them manualy from Format- Unhide they dont unhide. These columns stay hidden at all time.

View 2 Replies View Related

Format All Cells In All Sheets To Protection Hidden On Visible And Hidden Tabs

Feb 28, 2014

I am trying to format all cells on all sheets (hidden or otherwise) as "Locked" so when the sheets are protected the user can't see the formulas. This macro individually selects every sheet in the book and applys the formatting. Is there a way to modify this code to accomplish the same thing without having it actually select every sheet? The only reason it is an issue is that after running the macro you end up on the last sheet in the book.

View 7 Replies View Related

IF Skip (test If Any Cell In AZ 2:2000 Is Greater Than 200)

Jun 15, 2009

In column AX2:AX2000 there is a value(alpha numeric) MB60176685 and in column AX2:AX2000 there are various values.

I would like to test if any cell in AZ 2:2000 is greater than 200. If yes then blank AZ in that row. If less than 200 go to the next row. The value of AX will remain the same in that row.
SEE EXAMPLE of results BELOW

AX AZ
201
MB400174444 10
MB400174444 155

View 2 Replies View Related

Skip Code Depending On Cell Condition

May 17, 2006

I m trying to bypass some code if a certain condtion is meet. If Cell A1 has a zero in it I want to skip the following code and continue one with the rest of the macro. This is the code I have.

j = 0
RowCount = Cells(Cells.Rows.Count, "a").End(xlUp).Row
cell_a = Range("A1").Value
If Not cell_a = 0 Then
Rows("1:" & cell_a * 2).Select
Selection.Insert Shift:=xlDown
Range("A1").Select
For i = 1 To cell_a * 2
Range("a" & i).Select
ActiveCell.Value = j
j = j + 0.5
Next i

I put the If Not/Then statement in there to try and figure out what do. But I don't know what to put after the THEN statement. Basically I want run the code after the THEN statement if there isn't a zero in cell A1 and skip the code if A1 contains a zero.

View 2 Replies View Related

Skip Blanks & Copy To Next Empty Cell

Aug 23, 2006

Have the marco (see Code below)that I am trying to pull only records that have a "y" in a column. The problem I am haivng is that I also get cells that are blank and rows are skipped if the cell is blank or not "y".

Have tried searching for an answer or example for what I want to do. Looked at autofilter but had no luck.

Sub Macro1()
Set rd = Sheets("ActiveHerd") 'set read data sheet as rd
Set wd = Sheets("SaleSheet") 'set write data sheet as wd

For i = 12 To Range("A65536").End(xlUp).Row ' set i to the last row in column A
If UCase(Cells(i, 1)) = "Y" Then Range("A" & i & ":c" & i).Copy Destination:=wd.Range("AA" & i)
Next i

End Sub

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved