I've been trying to solve this for days. In Excel 2007 there is a 'Insert copied cells' function after copying cells and right-clicking on a cell which basically just inserts all copied cells to your desired location.
My question is, how do you call this function in VB, I've used F1 extensively and searched the net and haven't come up with an answer.
I have a spreadsheet with 27 Columns and 439 rows of data. I need to copy each row of data that has a certain criteria and paste the same data 141 times below it and then manipulate the data. In the same spreadsheet I need to copy a row of data that has other criteria in it and past it 30 times below it, and then manipulate the data.
I have been using the copy and insert copied cells function, but I have to scroll down 141 or 30 rows each time to ensure I add in the correct amount of rows. Is there a more productive way to do this? I have about 10 workbooks with approximately 47 tabs/worksheets each that I will need to update in a similar fashion.
I'm using a macro to copy cells (2 columns and between 1 and 5 rows [19 - 23 on s/s]) from one workbook to another but if I use
Rows("2:2").Select
Selection.Insert Shift:=xlDown
then every cell in the inserted rows are populated.
this is what I currently have
Windows("agent master.xlsm").Activate
Range("B19:C23").Select
Selection.Copy
Windows("distribution master.xlsm").Activate
Sheets("L38").Select
Range("A2").Select
Selection.Insert Shift:=xlDown
Application.CutCopyMode = False
but that doesnt work either. It just gives me an empty cell in A2.
Have you ever copy a row with formula in locked cells & insert it in a protected worksheet?
View 1 Replies View RelatedI don't know if a macro is necessary, but the built in Insert -> Insert copied cells -> Shift cells down function can't accomplish what I require.
I've pasted in two example tables for what I'd like to do. For the first table, the data in column C is a name and the cells from columns D-Z, rows 7-10 is what I want to copy and paste from row 12, column D; row 13, column D; etc, etc. However, I want the full rows below the name in column C to move down when I paste from column D. Using the Insert function on the Insert blade only gives me the data in columns D-Z moving down.
The second pasted table gives an example of how I want it to look.
A
B
C
D
E
F
G
H
I
[code].....
i have some columns which contain the IF function and so it returns me a value in each cell. Is there any way to copy only the values AND insert shift down the copied cells onto somehwere else?
View 3 Replies View RelatedI've been using the following macro ....
View 8 Replies View RelatedOne of the sheets in my workbook has 5 rows (Rows 1 - 5) that I need to copy and insert at the top of all but 3 of the other worksheets. I can specify the names of the 3 worksheets that I want to avoid changing. The other worksheets will be named differently each time I use the macro.
View 2 Replies View RelatedI have data in sheet1, which needs copied to sheet2
But in sheet2 already data is available. In Sheet2, i want code to go from header to down , to locate the first blank row in between data and to paste data by inserting same number of rows as number of rows copied.
I need to add a line on the top of a new worksheet with the data copied from another worksheets cells. Using a macro. The line has to be created everytime on the top of the new excel sheet with the previous data moving one down.
View 6 Replies View RelatedI have 4 rows that are on a "Resource" sheet need to be inserted into about 150 different variable locations across 20 different sheets. Here is the code I have so far the will copy it to one specific location (see below). I need making the macro insert these copied cells to which ever cell I currently have active. I'm still really new at VB programming so this probably something really simple to solve.
View 4 Replies View RelatedI'm currently trying to insert the copy range of one worksheet to another. Let's say I have 3 worksheets, one main and two additional info sheet. I want to search column C in main worksheet for blank cell and use column F in the same row as the worksheet name which I want to copy from, then use column E from main worksheet as the keyword for the range I want to copy(range from column E to column Z). But when inserting, I want the keyword in main worksheet such as 'G' in the same row as blank cell to match the 'G' in copied worksheet. Because the 'G' in main worksheet is not in the same column for each row, I try to search the forum but can't find the inserting part. I also attach the example workbook.
View 3 Replies View RelatedMy cell contents looks like this.
H1111111111111
I want it to look like this..
H11-111-111111-11
I know this can be done by formula but i dont know it. This info is in col B.
with a macro. I am looking to copy row 2 to the last row and past the copied rows directly below the copied contents.
View 9 Replies View RelatedI can use the MATCH function when i am in excel but i am having trouble getting it to work when i am trying to insert the formula using VBA.
Here is the code i have but it wont even compile........
when I insert a row into the sheet called WBS - Explanation, it only copies over into columns A:D in my worksheet called Timeline & Key Tasks. Unfortunately, I need the whole row to be inserted in the Timline & Key Tasks worksheet.
I can see how the coding has been set up and why this is happening, unfortunately I don't have the knowledge to workout how to change it to the code to include the whole row without deleting information, which I don't want to do.
I have a daily spreadsheet tracking sales. When I copy the cells to a new spreadsheet, alternate rows are filled with black. Even after selecting the black filled rows, I am unable to eliminate the black. I would simply like to "duplicate" the existing workbook. How can this be accomplished.
View 2 Replies View RelatedA most of time I'm using VLOOKUP function. I want to call specially this function by pressing custom button (w/o pressing "Insert Function" and choosing VLOOKUP)
View 4 Replies View RelatedI have some code (authored by Dangler) that i want to pull not just one range but also the contents of one specific cell and then copy the range and cell to a line on another spreadsheet.
Question:
f .Cells(i, 8).Value > 0 Then
.Range(Cells(i, 1), Cells(i, 200)).Copy
Sheets("all").Range("a65536").End(xlUp).Offset(1).PasteSpecial (xlValues)
End If
I want to add a single cells contents to the LINE that is being copied .... something like this...
f .Cells(i, 8).Value > 0 Then
.Range(Cells(i, 1), Cells(i, 200)) AND A1.Copy
Sheets("all").Range("a65536").End(xlUp).Offset(1).PasteSpecial (xlValues)
End If
the output would be like this: CELL CONTENTS, RANGE CONTENTS
or
K21, 40012122 400 450 450 50 001 BAGS
In my current sheet, I have a button which pastes the contents of the user's clipboard into cell A20. The data that is being pasted is a simple, single-column range of data that may or my not contain blank cells. When this button is clicked, the user's clipboard should already have data.
Some of these pasted ranges may go from A20:A40, A20:A60, or even A20:A73. The point is, the length of the pasted information is variable.
I am looking for VBA code which can look at the recently pasted range in A20:AX, find blank cells, and remove them. Here is my current code (very simple), which is only the paste function:
VB:
Sub admin_btnPASTE()
' paste_align Macro
' pastes data
On Error Goto Whoa
[Code]....
As you would normally use indirect formulas so the cell references don't change. Which that is what I want in the end, but I need to copy them to an indefinite number of cells first and would like to not do it by hand. I have found some solutions to similar questions/problems but cannot figure out how to make them work for me. So, what I am looking to do is this... (I have also attached the spreadsheet for reference)
I have gotten the information in columns A through F on the first sheet to update as rows are added, moved, deleted on the second sheet using Indirect range. Also, I could do this for Column I (Copmleted Proj. Avg. Terminations) but I would have to do it manually (as I began doing in I3, I4 & I5) but that would be time consuming. So I am hoping there is a way I can copy the formula down the cells are updated for the initial copy but then don't update if the referenced cells are moved or deleted.
I have a macro that copies time cells from another sheet and puts them in cells in another sheet, I also have another macro that takes 30 mins away from that time if a certain condition is reached but it wont work unless i retype over the copied cell.
View 14 Replies View RelatedBelow is code I have attempted. I am learning VBA and have gathered this code from the internet and this forum. I have data that is in columns B to E and from row 7 down. I want this VBA code to run when data is copied/pasted in these cells. Where the last values stop will vary so I just want to be sure this code is executed after all the data is pasted in these cells. The data will be pasted at one time. When the user removes the data from these cells, I do not want the code to run.
Private Sub Worksheet_Change(ByVal Target As Range)
'Do nothing if less than four cells are changed or content deleted
If Target.Cells.Count < 4 Or IsEmpty(Target) Then Exit Sub
[Code].....
What I want to do is call a value from a cell of a separate workbook file by just inserting the file name. So basically:
Cell A1: File_Name.xlsx
Cell A2: ='[A1]Sheet1!'$B$2
Such that the formula effectively reads: ='[File_Name.xlsx]Sheet1!'$B$2 , and outputs the value of B2 from Sheet1 of File_Name.
But I keep getting error messages.
I'm wondering if it's possible to use a lookup formula to populate cell comments? In other words, I'd like to put a lookup table into a cell, and if the value is not FALSE, have that Lookup table then pull in certain information into the cell's comments.
View 2 Replies View RelatedI'm trying to insert an IF function in a cell with VBA. But it keeps giving me an error and I don't understand why.
Here's the code:
Sub IFinsert_test()
Dim C_IndexKol As String
C_IndexKol = "Q"
Dim C_DebnrKol As String
C_DebnrKol = "A"
Worksheets("blad1").Range(C_IndexKol & "9").Formula = _
"=if(Worksheets("blad1").Range (C_debnrKol & "9")"""","testA","testB")"
End Sub
attempting to accomplish the following in Excel and I believe that I need to use VBA to do it. I am an intermediate Excel user, so you might need to "bring it down to my level" a bit :-)
maintain a master list of tasks (in rows) in a file (File1). In another file (File2), I will keep the task list and related hours charged by our staff (in columns). What I want the macro to do is to compare each row of File2 to File 1 and if they are different (which will happen if I add a new task to the master list in File1), to insert a row. It should do this for each row in the file until it reaches the end (there may be blank rows though).
I am trying to concatenate the text of a few cells in a specific worksheet. I'm not wanting to use the STRING & STRING type code because I already had a Concatenate formula nested with an index formula and needed to have this formula copied to a certain RANGE, Where the RANGE was specified by a Variable. T
he Code below does what I need if the CONCATENATE/INDEX formula is in the cell that im copying already. (BELOW) The Formula in the cell, for example, on row 19 of worksheet "COMMISSION", that needs to be copied and incremented down the VARIABLE RANGE is
=CONCATENATE(INDEX(OUTPUTS!J:J,(ROW(OUTPUTS!J2)-1)*2+1)," ",INDEX(OUTPUTS!K:K,(ROW(OUTPUTS!K2)-1)*2+1)).
VB:
Dim iInput_Rows As Integer
iInput_Rows = Worksheets("Workspace").Range("D3").Value
Dim iOutput_Rows As Integer
iOutput_Rows = Worksheets("Workspace").Range("D1").Value
Dim iAnalog_Rows As Integer
[Code] ....
My problem is when I use the following code to insert that concatenate/index formula, through vba, then I get errors because it evidently doesnt like the " " for the space i needed between texts. (The Formula is concatenating text in those cells but every other Row) Can I do this in VBA?
VB:
Worksheets("COMMISSION").Range("B19 + iOutputs_Rows").Formula = "=CONCATENATE(INDEX(OUTPUTS!J:J,(ROW(OUTPUTS!J2)-1)*2+1)," ",INDEX(OUTPUTS!K:K,(ROW(OUTPUTS!K2)-1)*2+1))"
I have a data set, with 20-30 columns and 3500 ish rows - in here I have to get different kind of information on each column.
One of them is Missing Values, that is cells that are blank in the specific columns, I know I can just use the countblank function and then just put in the number - but how do I do it if I want the formula to appear "inside" my pivot table, so that I have this range of data, and I want to calculate how many blank cells this specific column have.So my question is: Is possible to add the formula to my pivot table/data and get it to show next to the other information that I require on the different columns?
Is it possible to insert a cell refenece into the FIND function.
So, replace JAN-2013 with Sheet1 cell A1
Selection.Find(What:="JAN-2013", After:=ActiveCell, LookIn:=xlValues, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
