I have the following code for a vlookup , the code has to ckeck for each of the cells in column A . If the cells is empty , it should not run the vlookup and need to continueto the next cell. The Vlookup is running for the empty cells too.
Sub uploadtb()
Dim lastrow As Long
With Sheets("BS")
lastrow = .Cells(Rows.Count, 1).End(xlUp).Row
End With
I am trying to write a function that looks in column M1 to see if it is empty. If M1 is empty then check conditions if R1 = vlookup(R1,AA:DD,4,False) and if vlookup(E1,CC:EE,3,false) is true then vlookup(E1,FF:GG,2,False). If M1 is not empty then return back M1. I am trying to make a formula for this. This is what I have so far
let me start by saying that I know an example workbook would be useful here, but the part I'm struggling with is the [managementroster.xlsm] file, and there is A. no way I can release it to the internets and B. its so huge/complicated I couldn't even begin to reproduce a portion of it, scrubbed of data, and hope to maintain its functionality in a meaningful manner.
[Code]....
This formula checks a staff number on this spreadsheet, and then goes and looks at the staff number on the roster. Once found, it returns that staff members roster, but changes any manager codes in the MRC list to Mgr, and changes all other roster codes to Free.
I now need this formula, before altering roster codes to Mgr or Free, to only return codes that are a match for another table (or after really. I don't particularly care, so long as only codes are shown that match data from another table). I think an index/match function would do the trick, but this forumula is already at the edge of my excel ability, nesting another function within it is completey beyond me. The relevant cells for the index/match function would be:
This first Match function targets the column. $E3 is the date required, $BA$1:$DN$1 is the range the dates are entered in Match: Lookup value = $E3 Lookup array = '[ManagementRoster.xlsm]Vacancies!'$BA$1:$DN$1 match type = 0
This second Match function targets the row. $A$4 is the department name, $B$434:$B$452 is the range where all departments are entered
Match: Lookup value = $A$4 Lookup Array = '[ManagementRoster.xlsm]Vacancies!'$B$434:$B$452 match type = 0
Index: array = $BA$434:$DN$452
So I think my final function is
[Code] .....
But I have absolutely NO idea where it would fit within my first formula, or how to code it so that my original formula only reproduces results that are found in both sheets, or anything.
I am making a spreadsheet that tracks children's progress in school through the year.
I have a vlookup that turns their levels (2c,2b,2a,3c,3b,3a etc) into numbers so that the number of sublevels they have progressed during the year can be reported.
However, when children join through the year, they will not have data to go in the 'starting grade' box, so I was wondering if it would be possible to make vlookup see that cell E5 is empty, and so look in cell F5 instead. It might even, perhaps, have to look in cell G5 if they join the class after Christmas.
I have a workbook with 2 worksheets: summary and data. I added the following function to a module.
[Code].....
Then in summary sheeet in cell A1, I added the following formula:
=DashboardRowCount()
Data worksheet has only 11 rows but this function returns 1048576 rows! My intention is to get a row count of non-empty cells in column A of Data worksheet.
I want to be able to AVERAGE or SUM the first four nonblank cells. I know I could manually select the cells, but I have a spreadsheet with 30 columns and 40 rows, and the data (including empty cells) in each column is different.
Is there a single formula that will find the first four nonblank cells and then perform the AVERAGE or SUM function?
I'm building a sales tracking list and I have empty rows between each entry to allow easier viewing of the data. When I add the empty row to act as a "visual space" between line entries, auto filter only sees the first line of text and not all 400 rows separated by empty rows.
I am plotting a chart using data from custom functions. On occasion, the formulas return erratic values (due to the underlying data) which I wish to exclude from the chart. If the function does not pick up a value in the code, by default it returns a zero.I would like when this happens to have my function return nothing instead of a value - and I mean absolutely nothing, not a blank string. in this way, the chart line will totally ignore this point.
Is there a function that will count a column of numbers where that will eliminate counting empty cells based on a certain date that will also capture any numbers that is added after refreshing the table from Access? I have attached a spreadsheet for an example. I need to count on the number in column V that equals 13 for the date of 12/22/09.
I am trying to use the vlookup function together with an offset function but i am not getting it to work properly.
The situation is as follows:
I have a column E in which i use the vlookup function to find its corresponding value in B which in turn refers to a named range. However, the figure i want the function to return is 2 columns to the right and 2 rows above the value which the vlookup funtion finds in the first column.
I have though of using the offset function, but i cannot figure out how to make this work.
I am processing an infinite set of data from a meteorological station here in Alaska which gives me half hourly data reading with a time stamp 00.00, 00.30, 01.00, 01.30, 02.00, 02.30 and so on.
I am using this formula to detect every time half hour reading is skipped (=IF(TEXT(MOD(B1936-B1934,1),"[M]")="30","","missing")) and it works pretty well. Still I have to check and manually insert extra missing for every half hour missing but that's bearable.
This formula inserts a "missing" every time it finds a gap.
My question is: How can I insert a row above every cell with "missing"?
using the Mid function in Vlookup. I want to get the mid of the value which i get using vlookup. Example: if my Vlookup gives the value as "GSC 03-Parts & Service Systems-GSMS-Test " i want to use the mid function to get the a new value as 03. I'm using the below
I'm taking 3 very different reports and consolidating them into one manageable readable form. Only problem is that no 1 report has the same info. I've created a key to form pick up the same information that is read differently. As my spreadsheet grows so do the formula issues. I've had one report that has been the biggest pain to break apart. It takes several things and consolidates them, ex: big 2014 girl - dog 20145
I'm using a trim formula to read the last 5 digits that is the only consistent part of the string. =right(J3,5) to trim what i need to read (20145). this formula works. I'm than trying to preform a Vlookup based on what is returned from the trim. The trim number is located in a separate tab as the "key" 20145 = golden Labradors. formula for vlookup that works by itself, but throws up a blank cell when i point it to the trim cell.
=iferror(vlookup($A2,Info!A:ZZ,2,False)" ")
$A2 = the info 20145 from the trim Info! = is the tab with my 20145 = golden Labradors A:ZZ = the range in which i need it to find 20145 2 = the second column where it should find 20145 = golden Labradors False = exact match.
Why my formulas work separately but not when used together? The Vlookup will work if I type in the number 20145. I don't want to type 20145 anymore. I want to use the trim and have the vlookup notice the number pulled from the trim.
I am having issues using the INDIRECT function to lookup data from a sheet with the same name as that appearing in a given cell. For example, in cell D27 i have the text "S1_358_810" (Not including quotations). I also have a sheet named "S1_358_810". My formula is as follows;
Formula:
[Code] .....
However this is returning #N/A. There is a list of numbers in sheet S1_358_810 in column N and from that I want the value in column Q (thus 17).
I have a vlookup function that is looking up a range of cells. I would like it to look in the range and then sum up all of the values that meet the criteria. At the moment it will only bring back the value of the first match it finds in the range, I would like it to bring back the sum of all the values it finds in the range, is this possible? Example:
Vlookup(Jan-08,$a3:$c$7,column 4 values, 0), if Jan-08 is listed in the range more than once, I would like it to add up all the values in column 4 that match.
Function sequence giving me "N/A": =VLOOKUP(LEFT(C6,5),H:I,2,FALSE)
Basically, I have numbers that each start with a unique sequence. The first 5 numbers of that sequence represent a certain cell carrier.
What I want to do is have the function look up the first 5 characters of a cell and depending on the 5 characters, I want it to return a certain value.
My idea with the vlookup was to have the lookup value be the first 5 digits and then in my table, it would take only those 5 digits and return a value I have specified in the second column.
I tried with the VLookup, and HLookup and neither one worked for me. I have a reference table with all the data, and then input sheet where I want to bring this data by using one of the excel function. ie. When I enter office name on the top of the input page, I would like the Tax ID # in cell C3 to fill in using the excel function from the data on the reference tab. Same with cell C14 & C15. see attached for an example.
What I would want to happen is that I want to be able to use Vlook up by using the Value of the Textbox1 in the Info form and place the vlookup result in the fnameresult box.
I am trying to use the Vlookup function in a macro but I can't figure out how to write it. I am using a controlled loop to cycle through my data. So for the first entry, my lookup data is in cell A2. The lookup table is located in a sheet called 'Trade Table' and the lookup field is in Column B and value needed is in column C. The results go in column G. The excel formula is as follows:
I have to extract multiple words from the string using VLookup function.
(Example :"Cell A1 "This is the best example")
Example : Finding "This" from cell A1- result VLookup (Sheet1) A1:D12 Finding "IS" from cell A1- result VLookup (Sheet2) A1:D20 Finding "BEST" from cell A1- result "Excellect" Need to haev function for this
Trying to do Vlookup with If but dont know how , I can do the concatenate function and then Vlookup as in Sheet 3 but that is too much of load to deliver in quick time specially i have pull data in dynamic and continuous update.
I have a template with multiple sets of the same categories. I want to consolidate the data for each category in a summary. However - the template is expandable by using a macro - so the number of SETS of categories is not fixed. So a simple SUM function won't work since the list of cells expands. I don't want to re-write the formula each time and the method I have is "brute force" with lots of extra columns.
My thought - If I do a VLOOKUP for "Design" and the data is the "unit cost" column can a formula be written to see all the occurences of "Design" and SUM the "unit cost" returns?? example book is attached. hit the "add option" button to see the way the sheet expands.
What I need is for in the order start date column, I need a formula to pick out the first year where the value is inserted into the column and then insert the year into the order start date column. I would do this manually, but with thousands of rows a formula would prove to be most beneficial.