the attached workbook. Am trying to write a formula in Column F, which returns the results shown in Column H. Hope the workbook clearly sets out the criteria I'm trying to apply to the Lookup.
View 2 Replies1) Check to see if a value in column A of worksheet A appears in column A on worksheet B.
2) If it DOES, then display the value from the same row from column B on worksheet B, in column B on worksheet A.
3) If it DOESN'T, display the value "EACH" in column B on worksheet A.
e.g...........
After looking at other similar post titles I could not find a formula to work exactly proper.
I have attatched a sample of my problem. What I need is for cells E4:J4 to look for a match in cells B4:B16 and give a value of " Yes or No " in cell K4 if a match is found. Then copy down formula through E5:J5 to B4:B16 - E9:J9 to B4:B16. As my examples indicate Cells K4 would = yes, K5 = yes, K6 = yes, K7 = no, K8 = no, K9 = yes. Column D is the results, Columns E-J represents all combinations of column D.
I have tried the following formulas but they did not work entirely correct.
= NOT( ISNA( MATCH($b$4:$b$16, e5:j9, 0 ) ) )
= COUNTIF(e9:j9,"="&b4:b16)>0
I have two tables. Table A has 13 columns and 641 rows. Table B is in a different tab within my excel file but is only one column with 216 rows. Starting with Table A I need it to look up for the value in Table B. If the the value is matched, meaning they appear in both tables, I want the cell highlighted in Table A.
View 7 Replies View RelatedI have another challenging solve for a VBA macro. So here it goes, as I have become frustrated trying to make an array formula with no joy. On my sample worksheet provided below this is what I am trying to accomplish:
(Solution cells) B4:I4 looks to the (Combination cells) M5:R10 for a match
If a match is present then cell J4 gives a "win" ,
If no match then cell J4 gives a " lose ".
Next if a win is present in cell J4, then cell K4 looks for when the draw number that matches occurred on from cells A4:A10, then subtracts the two(e.g. solutions cells from combination cells) to give the actual " # of draws to a win ". If no win is present in cell J4, then the default is zero for cell K4
The formula would be copied down thru cells J4:K12
Please refer to sample worksheet attached so that you can understand more clearly of just what I'm trying to do.
I have 2 lists in excel format, each list contains numbers. I need to identify which numbers are on one list that are not on the other list.
Is there a formula (hopefully easy) that I can use to identify these?
I am trying to compare matches and differences in two lists in order to pull statistics from them.
I have a production schedule I make at the start of the week (list 1) and compare that to what I actually ran at the end of the week (list 2). I would like to produce the following from these two lists;
- a list (list 3) that shows all the orders I didn't run in my original schedule
- a way of summing the number of matches (of work order #s) in the two lists (list 1 and list 2)
- and way of extracting the corresponding machine hours I did / did not run from the two lists
I have provided text boxes on the attached excel file to better explain my problem.
I am working on a project, I have three different lists that I want to compare and I want to identify in 3 separate columns which titles are found on which list.
For example:
Title List 1List 2List 3
ACAROLOGIA x
ACCIDENT ANALYSIS AND PREVENTION x
ACROCEPHALUS x
ACS CHEMICAL BIOLOGY x x x
ACS CHEMICAL NEUROSCIENCE x x x
ACS COMBINATORIAL SCIENCE x x
ACS MEDICINAL CHEMISTRY LETTERS x x
ACS SYNTHETIC BIOLOGY x x x
I am trying to set up a worksheet whereby two critera when matched from a drop down list will populate cell 'x' with a coressponding answer. if you have Destinations then a From and To column with various locations listed below, then in a thrid column you have an output cell which is kilometres. What formula can i use to match the various location 'to' and 'from''s with the correct kilometre match?
View 8 Replies View Related4 columns a-d. now if i find either 1 of the 2 particular strings "hello" or "bye" in column A, I want to move column b into its place and leave the rest of the columns untouched
Example:
dog, circle, blue, 123
hello, frog, green,223
pig, triangle, red, 445
bye, elephant, grey, 322
into
dog, circle, blue, 123
frog, blank, green, 223
pig, triangle, red, 445
elephant, blank, grey, 322
have two worksheets. sheet1 has order information on it with orders, dates, customer names. sheet2 has customer name list. How can I (via vba) search through the order sheet and find the most recent order date for each customer in the customer name list. post that most recent date next to the customer name on sheet2.
View 4 Replies View RelatedI created a userform for a giant spreadsheet with tons of data in it. There are three criteria. I created two command buttons - one that's "search" and one that's "close." The close works fine, but I don't know enough to program the "search" command. I'd like it to pull all data that matches the three criteria - rows H, D and M. So, if you answer all three, the macro will pull the rows of data that matches and paste it into another workbook (that opens in another window).
I'm not sure userforms are typically used for this sort of thing...
I have a produced an Excel workbook which uses a VBA sign in/out userform.
Once you sign in on the Userform the sheets update. A list is completed of the times people enter and leave.
To make the code easier I currently have the name being returned to the excel sheet and performing a “match” function to return the row number. This row number is then used to carry out what I need to happen in this row. However, as you can see from attached doc (and the brief example below), based on IDnumber "2", the match function returns row 5 not row 8.
I need to have the row number returned for the IDnumber where the Out cell is blank.
This should be the last occurrance of the IDnumber
Example
Row
1 ID# In Out
2 1 9:00 13:00
3 4 9:00 13:00
4 3 9:00 13:00
5 2 9:00 13:00
6 5 9:00 13:00
7 6 9:00 13:00
8 2 14:00
I have a file with telemetry data for n individuals. For each individual I have data on a number of days, over the course of a couple of years. On any given day, I have from 1 to several "fixes" for an individual. Fixes range from 1 to 3, with 3 being the "best". Note that I do not necessarily have data for all individuals on a given day. What I want to do is extract the row with best fix for each individual, on each day for which I have data for that individual. If there is more than one best fix for an individual on a given day, then I want to choose the first best fix (temporally). Right now my data is set up with columns:
INDV DATE TIME FIX ....other attributes
INDV = unique code identifying the individual
The data is sorted by INDV, then by DATE, then by TIME.
I figured I could do this using nested IF statements, where "TRUE" would be added to a new column (e.g., HIGHFIX) in the row of the first highest fix on each day for each individual, but have not been successful in doing this. I've also tried conditional formatting. Again, no success here.
I have two worksheets. The first contains a list of software (some having duplicate listings) in column A and a list of comments in column B. None of the software titles that have duplicates will have comments.
The second worksheet contains a condensed list of software (the previous list without the duplicates) and a column for the comments.
I need to have a formula that populates the second worksheet comments cells with the corresponding comments from worksheet one only if:
(1) The software title in worksheet two matches the software title in worksheet one
(2) The comment cell in worksheet one contains a comment (or text)
I have had only partial success; my obstacle being the duplicate software titles in worksheet one.
I've been looking through past threads and I can't find what I need to do anywhere. There was one formula that came close: =SUMPRODUCT((A2:A100="Aimbry")*(B2:B100="LW")*(C2: C100)). but this adds up all the matching results.
What I need to do is match the info in columns A and B and return a number in column C. The problem is that there are multiple rows with identical entries and I just want to return one of them. So I was thinking a version of the above that produced a mode or average would give the desired result.
I have data (coming straight out of another system, so whilst is seems messy, its the easiest way to have it in Excel).... where there are a number of rows (one for each employee) - then every column represents a date in the month (so there are about 30 columns)....the cells contain a number of hours worked by that employee for that day.
I have figured out how many hours they worked for each day of the week, but my client now wants to know:
for each employee - how many Mondays did they work?- how many Tuesdays? and so on
I am happy to figure out the day of the week for the first date in the month and then manual set up another column heading above the date that tells me what day it is - but I feel that Excel may actually be able to work out what day of the month it is - although the dates come across from the other system as text - April 26, 2006 etc...
So I would like a summary in my sheet that has column headings
Mon, Tues, Wed, Thurs, Fri, Sat, Sun
and then for each row for each employee - I would like the number of days that employee worked for the month by these Days of the Week.
I have looked at Count if - but I need to be able to select the range of cells to count, and also the range of cells to evaluate for the criteria and I cant figure it out!
I am trying to use a "=COUNT(IF(..." formula to count the number of hourly employees that have start dates older than 3 years. Column A has the start dates and column B has the salary status (S/H). =COUNT(IF(AND(A2:A1000<DATE(2004,1,1),B2:B1000="H"),A2:A1000)) This formula returns 1 no matter what I change the data to.
View 3 Replies View RelatedI have used INDEX/MATCH/ROW/SEARCH functions, in different permutations, but I am unable to get the result. The data set is something similar to the below:
Car
Region
Own
Use
Color
Honda
North
Yes
I use it to go for work
Green
[Code] .....
I want to be able to do following (2 separate tasks):
Task 1 (if in A1 on a new sheet, I had Use, i want to list all the items in an adjacent column, skipping the blank rows)):
Use
I use it to go for work
Family trips
Weekend fun
2nd car
Work
Task 2 (if i had Honda (A2) and North (B2), I want to have the colors listed in Column 3):
Car
Region
Color
Honda
North
Green
White
I know this can be done by an auto-filtering or manual sort, but I have work with thousands of similar data on a regular basis, and i want to find a formula that will allow me to list the items based on different criterion.
Column A would be Recipe Numbers, Column B the Planned Total.
I want to search column A for all matching recipe numbers.
Then, any recipes that match, look in column B for the planned totals, adding all incidents where they match.
Then the most difficult part, which just occured to me now.
I only need the Total Planned Total and Recipe name reported once.
Recipe#..........Planned Total
450................100
600................75
620................125
450................50
620................180
450................100
600................200
450................110
I will not be able to sort these lists.
If-Match-Sum? to display:
Recipe#............Total Planned Total
450....................360
600....................275
620....................305
I've researched for the first part... and it seems like Match will only find the first match and not look further? Am I wrong on this?
How to display the results hadn't even occured to me yet, since I was still trying to figure out how to GET the result.
I'm trying to restructure a list of files at work into a format that makes some sort of sense and can be filtered into useful information.
Part of what I need to do, is match up all the drawing numbers that a certain project references. The numbers are formatted like "####A##" ex. 1234A01,1234A02,5678A01, etc. The cells that I need to extract drawing numbers from contain some description or other text (not just the drawing number) so I need to extract the drawing number from that cells value. (Ex. I need to get the drawing number 1234A01 from a cell whose value is "blah blah 1234A01 blah blah blah")
I was thinking I could just search the string for "####A##" but I'm not really sure how....I tried instr, but I think its searching for the literal value of "####A##" rather than treating the # characters as wildcards...
I tried:
Code:
if rngNames.Cells(intx, 2).Value Like ("*####A##*") then
set intStart = instr(1,rngnames.Cells(intx,2).value,"####A##")
'....
end if
but intStart remains 0, so this method is not working...
I have a advanced filter that works pretty much close to how I want it to. However I would like it to either cancel the new filter or copy everything if it finds 0 matches.
If the copied location is blank it breaks my sheet. So I need to find a way for it to never be blank, either by canceling it, copying everything, or finding some other way I haven't thought of.
Also for some reason my Advanced Filter does NOT Ignore blank "OR" cells. If I place a word in the top cell, then leave the bottom blank, it searches for the top cell or anything and I end up with everything. Its quite frustrating.
I have a workbook with two sheets
sheet1(Invoices) is the master and sheet2 (GR) contains information that i need to put onto sheet1.
I need a formula that will allow me to lookup sheet2 based on the criteria from 3 columns on sheet1... (PO no, Part No, Qty)
At the moment I am using 3 different vlookups to achieve what I need
If there are records on sheet2 which matches sheet1 then I would like to have the word MATCH if there is a match and CHECK if there is not?
This is a continuation of thread 182629 [URL] ....
The End User wanted originally to type characters into cell C1 of a worksheet that the macro searched for in another worksheet, copying across every row containing the input.
The responses gave me the following code which worked perfectly:
VB:
With Sheets("PICKLIST")
myFind = "*" & .[c1].Value & "*"
End With
If myFind = "*" & "" & "*" Then Exit Sub
Unfortunately, the user NOW wants a Text Box instead of putting the characters into a cell.
I added a textbox (originally called 'TextBox2' but renamed "Choice") and "Dimed" CHOICE As Range.
Then tried the following code:
VB:
With Sheets("PICKLIST")
myFind = "*" & CHOICE & "*"
End With
But it generates a "RunTime Error 91" - Object variable or With block variable not set.
I have a macro that would check data in Column A and validate if a particular number is repeating, then for that number go to column B, Take the Values from there go to a new sheet and paste the values in a row.
CurrencyDateRef CodeIDAccountAmountDes.USD07152011XDVU4315210.4200.C5001.USD-18,606,772.190Distr Payable 07152011USD07152011XDVU4315210.4200.C5002.USD-111,131.450Distr Payable 07152011USD07152011XDVU4315420.4240.C5001.USD18,606,772.190Distr Payable 07152011USD07152011XDVU4315420.4240.C5002.USD111,131.450Distr Payable 07152011
I get the data in the below format
CurrencyDateRef CodeIDAccountAccountAmountDes.USD07152011XDVU4315210.4200.C5001.USD420.4240.C5001.USD-18,606,772.190Distr Payable 07152011USD07152011XDVU4315210.4200.C5002.USD420.4240.C5002.USD-111,131.450Distr Payable 07152011
I need to the macro to get the data not from the second cell.
Below is my macro
Sub test()
Dim idRange As Range, c As Range
Dim uniqueID As String
Dim destSht As Worksheet, sourceSheet As Worksheet
Dim r As Long
Dim i As Integer
Dim map As Object, key, item
[code]....
I have a long list of names in column A, and in Column B next to each name is one of 10 group identifiers (Advertising, Marketing, Finance, etc). I'd like to divide the 300 names into groups of four people, with none of the four people having the same group identifiers. So, groups of four people that look like:
Column A Column B
Amanda Jones Marketing
Shelly Stevens Finance
John Banana Advertising
Tim Stewart Logistics
What is the best way to do this?
I want to compare 2 lists in separate sheets based on multiple criteria and delete the duplicates
Sheet 1 - new list in column A:E
Sheet 2 - old list in columns B:F
So here is what I need: the macro should generate single IDs made of Sheet 1 Ai,Bi,Ci,Di,Ei cells for each row i to the end of the list + generate single IDs made of Sheet 2 Bi,Ci,Di,Fi
If . Evaluate (Sumproduct (IDs made of Ai,Bi,Ci,Di,Ei from sheet1) & Sumproduct IDs made of Bi,Ci,Di,Ei,Fi from sheet2) >1 then delete the entire row in Sheet 2.
This will leave me with only updated items (rows) in Sheet 2
I'm looking for a solution to a problem and from what I've read in the forums so far, this is the place to come. I first want to say that I have tried to solve the problem by using guidance from other similar threads and adapt those answers to my needs, but as my understanding of VBA is non-existent this was somewhat difficult. I don't want to post a repeat question and I hate wasting people's time if unnecessary, but I can't do this on my own.
That being said, here is the problem;
(I have attached a simplified copy of the worksheet I am working on for reference)
I would like to lock a particular cell in my spreadsheet based upon the selections made from two drop down validation lists (Cells “C4” & “D4”)
Essentially, if a correct choice is made in both, then the cell “E4” becomes unlocked for editing. If however, the correct selection is made in one list, but not the other, I need the cell “E4” to remain locked and a message to appear to prompt the user to correct their mistake.
Furthermore, both the validation lists have a whole range of selections that are very similar but have subtle differences;
E.g.
"Soft Eye by Talurit"
"Soft Eye by Splice"
Is it possible to write a VBA code that performs a similar function to the =IF(ISNUMBER(SEARCH("**",))) formula, so that if any choice that contains the word "Soft" is selected from either or both lists then the cell “E4” becomes unlocked, but if the selection does not contain that word then the cell remains locked?
If anyone could provide a code to make this happen, I would be very grateful! But please explain how to do this, as the word “Soft” won’t be the only parameter and I may need to alter the code so I need to understand the principle behind it; For example, on the spreadsheet, if in the ‘Inboard End’ list a ‘Soft Eye’ is selected and on the ‘Outboard End List’ a ‘Soft Eye’ is selected then cell E4 is unlocked for editing. If in the ‘Inboard End’ list a ‘Soft Eye’ is selected and on the ‘Outboard End List’ a ‘Fused and Tapered’ is selected then cell E4 is unlocked for editing, but if in the ‘Inboard End’ list a ‘Soft Eye’ is selected and on the ‘Outboard End List’ a ‘Standard Eye’ is selected then cell E4 remains locked and an error message appears to alert the user that his/her choices are incorrect. If however, "Soft" is not selected in either list then cell E4 remains locked (it has to be selected in at least one of the two lists to allow editing).
This is a work in progress (not all the formulas that will eventually be used have been entered yet, so please excuse the untidiness of it all) and the choices are likely to change based on input from my colleagues, so I need to understand how the VBA works in order to alter it accordingly, but I don’t want to put any more work into this (it’s still in the early stages) if it isn’t possible to achieve these needs.
I have several worksheets (Labeled Sheet1,Sheet2,sheet3) What I need to do is to step through each row in sheet3, and do a search in sheet1, it the data was found, then return the row number. I then will need to copy data from sheet1 (rowfound columnA , through rowfound CoulmnBd to sheet3 current working row columnK
View 3 Replies View RelatedIn my spreadsheet, on the first worksheet called "Working". Column A, called "Results", contains carrot ^ delineated string values in each cell (i.e."john^apple^pear^banana^grape^love^heart^pickle"). The majority of string values in every cell in my "Results" column match a "source" column of Pick-List Values, called "Fruits" in the same spreadsheet, however found in a different worksheet called "Lists" (also in Column A). I want to perform 3 functions against my "Results" Column on worksheet "Working":
1.) Report In Column B: Analyze column "Results" by cell and return carrot delineated string values for only those that match my "Fruits" Pick-List
2.) Report In Column C: Analyze column "Results" by cell and return carrot delineated string values for only those do not match my "Fruits" Pick-List
3.) Report In Column D: Identify and return all unique values in "Column C" as a List.
Attached is a simple example of what I'm trying to accomplish called " Sorting.xls"