If / CountIF / Match-Need To Count Cells Until Value Met
Sep 16, 2008
I am analyzing a quota schedule. I need to count the cells in a row until I hit a value in one of the cells in that row (lets say cell>=30). Then I want the formula to evaluate the next two cells in front of that cell to determine if either is >=30, if so then the formula counts up to the original cell. This will determine # of days out for a install or trouble call lets say.
I have messed with a combination of IF, CountIF, and Match statements and just seem to hit a dead end. Any thoughts, even if it is that I may need another approach, is welcome.
Here is some code I have tried to no avail: ....
View 14 Replies
ADVERTISEMENT
Jun 23, 2009
How do I count the number of cells that have a value greater than 0 in a range of cells?
View 2 Replies
View Related
Jun 3, 2014
I have been looking for a way to count the number of cells in a column that do not contain the word "No." I used the countif formula to count the cells that do contain "No" but I need a formula to count cells that contain anything but the word no.
View 11 Replies
View Related
Sep 3, 2013
Currently, I am using countifs to count data within a specific range if it meets a criteria. Now I want to add to the formula. I need to count the cells within the specific range meeting the existing criteria I already have but only if one cell is greater than another cell.
This is what I currently have: =COUNTIFS(Report!$F$4:$F$1048576,">=8/1/2013",Report!$F$4:$F$1048576,"=8/1/2013",Report!$F$4:$F$1048576,"
View 2 Replies
View Related
May 13, 2013
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
View 5 Replies
View Related
Aug 27, 2013
I'm trying find a way when running a report that continues to grow weekly - to either run with a script or a specific formula. There's certain cells that I'm trying to capture but the main thing is it's very time consuming and is tracked onto a separate workbook. Here's what I'm looking for a hand on:
Weekly list of 20,000+ rows - includes customer information - names, addresses, phone, account #, order #, etc I sort my list by address and then look and manually count the duplicates. Once duplicates are located I enter on a separate workbook along with the most recent order number. There has to be a faster way.
View 1 Replies
View Related
Oct 3, 2013
Basically i need to work out if a3 matches one of the dates in column 1:1 i need it to calculate and give me the sum for the weekly total of b3, d3, f3, h3, j3, l3 and so on if column a4 matches one of the dates in column 1:1
Mon/02/09/13
Tue/03/09/13
Wed/04/09/13
Thu/05/09/13
Fri/06/09/13
Weekly Total
[Code] .......
View 8 Replies
View Related
Apr 4, 2014
I am trying to count unique values of the column tienda with the unique values of the column promo. Output expected below table.
promotienda
pablo a
pablo a
pablo b
juan c
juan c
juan c
jesus d
jesus r
Output:
Pablo: 2
Juan: 1
Jesus: 2
View 1 Replies
View Related
Aug 22, 2014
From the highlighted cells at B17 to B19, while using some kind of lookup or indexing method, I want to count the number of cells in that specific range that's great than zero. This list is just a sample, the list will be much bigger and order may not be the same--that's why I need to lookup the project name.
View 7 Replies
View Related
Nov 3, 2008
I have a column with a different alphanumeric strings in each cell. Some of these values have a portion that is common. For e.g.:
Example kealey 1980
Testing
Reference
Example john commission
Example (hard sell)
Is there a formula to return the number of cells that have "Example" in them?
View 5 Replies
View Related
Feb 27, 2010
I am using this to count how many times a particular number appears across numerous sheets, My sheets are in a Named Range MySheets....
=SUMPRODUCT(COUNTIF(INDIRECT("'"&MySheets&"'!A2:A30"),A2))
This works great.
What I now need to do is to find ALL matches and return B1 from those sheets..
GHIJKLM1Countif ResultFirst ResultSecond ResultThird ResultFourth ResultFifth ResultSixth Result25AppleBananaPearMangoOrange31Banana43BananaMangoOrange
I have played around and the closest I can get is with this...
=IF(COUNTIF(INDIRECT("'"&MySheets&"'!A2:A30"),$A2),INDIRECT("'"&MySheets&"'!B1"))
This as you may know only returns the result B1 from the first sheet within MySheets.
View 9 Replies
View Related
Sep 22, 2009
Here is what I have. 4 Worksheets. The first worksheet is a summary page. I have 350 personnel that are broken down into three different groups. So each group has it's own sheet. Here is what I need to accomplish. Results need to be posted on the summary sheet.
I need to compare cells B2 & D3 for each row on a worksheet and display the number of times they match on a worksheet. For example how many times does EP & EP match on a certain row. I need to compare cells B2 & D3 for each row on a worksheeet and display the number of times they don't match on a worksheet. For example how many times does EP & MP occur. I've attached an example for reference
View 5 Replies
View Related
Jul 8, 2014
I have a tracking spreadsheet that covers the movement of people in a care facility. I have a COUNTIF string to cover the days of the month, however I need to find a formula to start off that string with, that will do the following:
If cell A6 (Last Name) is blank then do not count cells M6 through AQ6(my days of the month). If A6 has text then count M6 through AQ6 using COUNTIF formula I have in place, which is located in cell BC6
=COUNTIF(M6:AQ6,"")+COUNTIF(M6:AQ6,"HLV")+COUNTIF(M6:AQ6,"TLV")
+COUNTIF(M6:AQ6,"ADM")+COUNTIF(M6:AQ6,"RTN")+COUNTIF(M6:AQ6,"LCCN")
Master SS 31 DAYS.xlsm
View 6 Replies
View Related
Aug 16, 2007
I have two columns on sheet called back1! if a number is put in a cell from P5 down to P40 and a corrosponding number matches in K5 to K40 I want to be able to count it as 1.
So if a number is in k6 and a number is in P6 it counts as 1.
and so on down the cells.
View 9 Replies
View Related
Jul 13, 2006
I've got a table that contains a lot of text that i need to summarse in another table. Its really just two columns the first contains a group name and the second a result. What I need to work out is the number of times the result occurs for each group. But every work sheet function I've entered fails.
View 5 Replies
View Related
May 21, 2009
Is there a way to ammend one of these formulas (preferrably the 2nd)
so if the value in the referred cell is 0, the result/output will be "No Bid"?
View 5 Replies
View Related
Nov 12, 2008
I have a column of values in "£"s and i need to count how many entries there are within a range. I have been able to do it with text but not money values with £ signs!!
View 2 Replies
View Related
Dec 19, 2008
I am not sure how to go about this but here is my problem: text in cells a40:A147 containing card number this: -01- and cells h40:h147 containing and "x" if the card -01- is closed. Now I want to count all the -01- cards that do not have an x in the h40:h147 cells and I need to count all the -01- cards that do not have an "x" in the h40:h147 cells.
View 2 Replies
View Related
Nov 25, 2013
I have a bunch of cells that i want to count in a table based on 2 criteria. The first would be checking whether or not it matches a certain text which i can do. Now i have a column for "Completed Date" and "Deadline Date". Each deadline date is different. I know i need some sort of array function in there to compare all the completed dates vs deadline dates but i just can't think of it. This will be the second criteria.
View 3 Replies
View Related
Feb 3, 2006
i am trying to get totals from data and am using 2 different times to count from (eg. i am trying to find how many cells contain times in the 6:00 am to 2:30 pm range in the same column...I can't seem to be able to count these correct.
View 5 Replies
View Related
Jul 2, 2009
I have a spreadsheet designed for softball schedule for an entire league and am trying to come up with a way to count certain information so that I can figure out if the schedule is balanced. What I'd like is for a way to sum the number of games each team plays on diamond 3 or 4 and to sum number of games at 6:30/7:30/8:30
View 2 Replies
View Related
Jan 3, 2007
I currently have a sheet with Wins & Losses being identified with a L and a W
Example Colums b1 = w, b2=w, b3=w & b4 = L
Now if i want to do a total of the longest winning streak at the bottom of Column B How would i structure my formula to count multiple wins in a row.. Currently im just counting total wins but i also was to count winning streaks & losing streaks..
To count im using =COUNTIF(B$6:B22,"w") and =COUNTIF(B$6:B22,"t") for TIES and for losses im using =COUNTIF(B$6:B22,"l")
View 9 Replies
View Related
Oct 29, 2008
i have a list of employess who i need to count each month. i need a way i can say count if >0 for month = Oct. each employee has a summary of there work for a month in a list going down.
example
___John
Jan__0
Feb__19
Mar__50
___Bob
Jan__4
Feb__56
Mar__12
Right now i have a way i am summing up the total work for all the employees
"=SUMPRODUCT(B21:B512,--(A21:A512=A4))" <------'A4=Jan in the formula'
How could i change this to reflect count the employees and not sum the total? The idea is a need to know how many employees had a number greater then 0 for the month of Oct.
View 2 Replies
View Related
Aug 15, 2006
How can I use COUNTIF to count the values in a range which are greater than 0?
I put =COUNTIF(B2:B100000)>0 but that didn't work?
(I'm using XL 2007 hence the range greater than 65000 rows. But I don't
think COUNTIFs syntax has been changed in 2007 so I assume I'm having a brain
fart.)
View 3 Replies
View Related
May 6, 2009
I am trying to do a basic count in a range, however am a little brain fried and its not working. On attachment, column D is to list all times out of column A and B listing only unique entries (have tried to use Macro with advanced filter however not liking it being an extract). Column E is to be a count of how many times the break time in Column D appears.
View 2 Replies
View Related
Feb 25, 2007
I have a table of data as below recording daily foreign exchange rates.
Column A = Time and date
Column B = USA
Column C = UK
Column D = Aust.
Column E = Japan
Column F = Euro
Time and date USA UKAust.JapanEuro
04-Jan-20060.68390.39180.924379.470.5693
05-Jan-20060.68660.39050.918779.720.5666
06-Jan-20060.68710.39150.919579.720.5675
Then in column H i have a formula that works out if the rate has exceeded a specified base rate, if it has i display Threshold Exceeded and if it hasn’t i display No Action Required.
OK from here i want to count the number of times in the month the Threshold has been exceeded. I can do this by using the countif formula.
Now this is the section i need help on
For a specified time, say a month, i want to count the maximum number of times the Threshold has been exceeded consecutively.
E.g
Threshold Exceeded
Threshold Exceeded
Threshold Exceeded
Threshold Exceeded
Threshold Exceeded
No Action Required
No Action Required
Threshold Exceeded
Threshold Exceeded
Threshold Exceeded
Result = 5 (max number of consecutive Threshold Exceeded” for a specified time frame)
View 9 Replies
View Related
Mar 11, 2009
can i use the countif question to make it count till a particular row based on the value . for instance if i want the countif till value 45 is met i.e i want countif to count till the row where 45 value is housed
VALUES 40404540403047
View 9 Replies
View Related
Jan 28, 2008
HOw can I match combination columns of A-F (row1) to combination H-M (rows1 to end) and show how
many are number matched in column N..
ex..
Rows
A
B
C
D
E
F
G
H
I
J
K
L
M
N
1
2
3
16
17
11
9
11
17
18
View 9 Replies
View Related
Jun 27, 2014
I am trying to set up a worksheet that shows shifts using a Capital "D" and a lower case "d" (one is for a 12 hour shift, the other for only 6 hours). Is there any way to set up a Countif formula that makes the distinction?
View 12 Replies
View Related
Jan 20, 2014
=IF(AND(Weekly!$E4<>Admin!$E$2,Weekly!$E4<>Admin!$E$3),
COUNTIFS('Issue Log'!$A$2:$A$50,$A4,'Issue Log'!$B$2:$B$50,$B4,'Issue Log'!$C$2:$C$50,'Issue Log'!$C2,'Issue Log'!$D$2:$D$50,"<>"&"Completed",'Issue Log'!$D$2:$D$50,"<>"&"",'Issue Log'!$D$2:$D$50,"<>"&"Cancelled"),0)
WEEKLY
ResourceProjectContact ActivityStatusEst. TimeAct. Time # of Issues
Elaine W.PIPBA - Bonnie SchaferTESTIn Planning1
ISSUE LOG
ResourceProjectActivityIssue Status
Elaine W.PIPTESTCompleted
[code]....
View 3 Replies
View Related
