I have three workers for which I am counting the data from using a countas formula. The cells are A1,B1,C1 and I want to highlight in another formula to the right if these three values do not equal each other, I have tried and if formula referencing each of the combinations of the compares however it does not work in the desired fashion.
View 3 Replies
I have attached a file which shows some cells which start with "p" and then a number and some have the same but with the word " total" in them.
I would like to run a formula in the column next to it which will highlight which cells have that word in order that I can data sort a large file and delete the totals.
I think it will be an IF formula on cells that contain criteria.
I have 3 rows with numbers across several columns, each cell holding one number only. For example:
R1: 1101 - 1102 - 1103 - 1104 - etc.
R2: 2101 - 2102 - 2103 - 2104 - etc.
R3: 3101 - 3102 - 3103 - 3104 - etc.
A little further down I am having a list where the end user will write down the exact same number. Once the same number has been written into the list, I would like the number shown in the top rows (row 1 to 3) to be highlighted in green, basically telling the user that the number has been entered into the list below and is ok now.
How can I manage this via conditional formatting?
how to create a conditional formatting formula that looks like this..
"If A1 is equal to DATA highlights greater than zero on cells A2 to A1000.
I'm trying to get a random sequence of numbers e.g. 1-20 so that no number is the same i.e. no number appears twice.
I used Int(20 * Rnd + 1) + 1 but this gives me same numbers. Any ideas how i can do that?
I have list of dollar amounts given to me and a general ledger sum which some of those in the list must equal. How can I determine which of these amounts will equal a given ledger total?
View 12 Replies View RelatedIf I have A1 = 1, A2 = 3, A3 = 5, A4 = 7, and A5 = 9 in column A, Would someone know how to get the combination of numbers in column A that equal 13, or 24 for example?
View 9 Replies View RelatedI have a range of values in a1:f500 the values are all numbers between 1-25. I then have a value in cell h1. what i need to do is find all numbers that equal to 9 in the range a1:f500 and replace all these 9's with the formula =$h$1 so that i can simply change the values in the range a1:f500 by changing the value to say 12 in cell h1. could someone please text me the vba code that needs to be entered for sheet 1?
View 9 Replies View RelatedI have done is created an Officer Evaluation Form in Word for my Police Chief and the Scores for the different observations are: N/A, 1, 2, 3, 4 and 5. If for example there are 4 observations and one of the observations is "N/A" for not applicable or not observed and the rest are all 5's I want the formula to ignore the field(s) with the N/A and still come up with an average of 5. The way I have it set up now which is: =AVERAGE(KOW1,KOW2,KOW3,KOW4) it comes up with an average of 3 when I put a N/A in field KOW1 and all 5's in KOW2-KOW4.
View 3 Replies View RelatedI have a list of 600 figures (this may vary) but i need a formula that will look a one particular figure in this list and return if it is one of 5 equal groups. e.g in this example the lowest 125 figures in numeric order would be in group 1 up to the highest 125 figures would be in group 5.
I realise if I limit it to 4 groups then i could use the 'quartile' functions but i am stuck with 5 groups.
I would like to create a formula that will sort the numbers in column B, there are also equal numbers in this column
The difficult part is that there is text in column A, and is linked to the numbers
So if numbers are sorted the names should be sorted in the same way as well.
Is there anyway to use Excel to determine which of a set of numbers equals a total? I encounter this issue when dealing with accounts receivable. We receive payments with no details on what is being paid. I have a list of open items and a total being paid. I would like to have Excel determine which combination of invoices can be added together to match the payment.
View 4 Replies View RelatedI have two columns with item code numbers in them
if any numbers from column 1 are duplicated in column 2, i want them to be highlighted automatically, maybe with a coloured cell or something?
I have 49 lottery numbers split in 3 segment and 5 groups separated by coma
In cell Range from B2:F4,
I enter 5 numbers from draw result in to cells B9:F9
What I want to highlight the ticket numbers that have been drawn a in lottery, In this example the ticket numbers are in cells B2:F4, and the drawn numbers are entered in cells B9:F9
Example is below
A B C D E
G1G2G3G4G5Seg12, 5, 6, 8, 915, 1921, 25, 2637, 38, 4042, 45, 48Seg23, 4, 711, 13, 1827, 3047, 50Seg31, 1012, 14, 16, 17, 2022, 23, 24, 28, 2931, 32, 33, 34, 35, 36, 3941, 43, 44, 46, 49Lottery Result Below:57142049
There are 350 numbers in a column, 7 digits in each cell. I want to see which cells have 3 or more consecutive numbers. Only looking at the last 3 digits. Example. 1960657. 1960658. 1960659. 1960660. Has 4 consecutive numbers.
Conditional formatting ? or other?
I want to bold the text and numbers in a row if the row contains the word "total".
View 9 Replies View Related.....
In the table above in cells A3:F4 is the draw result.
Option1: in the column H played numbers are separated by semicolon
Option2: in the column I played numbers are separated by coma
Option3: in the column J played numbers are separated by space
Is there any formula or conditional formatting method to highlight match numbers out of any one of three options?
I am wanting to check columns B:L for data entry on each row. Going at most 500 rows down if that is relevant. If there are no numbers on the row in those columns, then I want either the whole row or just the column range to be highlighted, whichever is easier for a solution.
I think this can be done by defining a named range using some sort of count function and then using the named range in conditional formatting. But that is just concept and I can't actually make that happen.
I have two spreadsheets. Spreadsheet 1 has 6 columns and column E has a list of numbers. It runs from E2:E739.
Spreadsheet 2 has 9 columns and column A has the numbers I need matched against. Column A runs from A9:A5027. How can I find the numbers from Spreadsheet 1, Column E that are also in Spreadsheet 2, Column A. Once matched I would like to highlight the ROW on spreadsheet 1 that has a match.
I have a spreadsheet with a stock list. Each item has an individual number. I have a code below, which I have doctored from other various sources. The problem I have is that if I search for number '12' the spreadsheet highlights every cell with 12 in (120 121 122 123 etc...) Is there any way I can change the code so that it returns only the 12 and not every cell that contains 12? The current code is as follows:
View 2 Replies View RelatedI would like a macro to highlight duplicate numbers in Col A in Sheet1.
View 4 Replies View RelatedI have numbers in 7 groups in cell B2:H8 and winning numbers in cells B11:H27 The function below works fine with: For example if I select cell A2 (G1) numbers are in this row in the cells B2:H2 highlight perfect in the winning numbers in cells B11:H27 As shown in the picture below
A
B
C
D
[Code]....
I have tried a little bit of different conditional formatting but cannot seem to get what I want.
So then I found this code that will do what I want if I could get it to recognize the highlight.
Sub HilightRows()
For Each cl In Range("C:C")
If cl.Value = 202546 Or cl.Value = 102725 Or cl.Value = 192473 Then
Rows(cl.Row).Highlight = True
End If
Next
End Sub
I want to be able to highlight rows that have certain numbers. When it finds the number it highlights it and goes to the next one and highlights it and so on. The numbers reside in column 'C'.
I changed Row(cl.Row).HiddenRows = True, To Row(cl.Row).Highlight = True. But it is not working.
I am trying to set a scorecard up where it will give points depending on the % actual. For example:
if less than 60%, then 0,
if equal to or greater than 60% but less than 75%, then 1
if equal to greater than 75% but less than 80%, then 2 and so on.
I have been playing around with the example below, but can't seem to get it working.
[php]=IF(A1<60%,0,IF(A1>A1<75%,1,))[php]
Maybe it 's because I pickled my brains last night.
How do I get the cells in column "F" to highlight all negative numbers UNLESS the following 2 conditions are met: the number in column F = "-105" AND there is an "@" corresponding in column "C". In the attached file F5 & F7 are highlighted properly according to what I want, but F6 is not (since F6's value is "-105" AND C6's value contains an "@").
View 7 Replies View RelatedI have one debit and one credit column. I want to higlight duplicates, with positive and negative values.
Like this.
Column A
5000
1000
10000
3000
Column B
- 10000
-5000
-3000
-2000
I know how to do the conditional formating to find duplicates when there is only positive or negative numbers, but i don't know how to match both positive and negative numbers.
I managed to find this great bit of code some time ago and would now like to add to it. The code basically identifies any duplicates in column A and then lists the results in a message box,e.g.:
Duplicate Name: REF12345
Rows: 2,3
Works great for 1 or 2 duplicates but if there are many it becomes quite difficult to keep track. I'd like keep the code as is but add highlighting to the identified cells.
Example:
A
B
C
D
[Code].....
I have 49 random numbers esquire 7*7 in the cells B2:H8, and the lottery result in the cells B11:H20, and the result dates in cells A11:B20.
What I want is it possible if I select the cell for example in A11, then numbers are in cells B11:H11 can be highlighted in random number esquire, as shown in the example.
And If I select A12 then highlighted number of this row cells B12:H12 and if cell A13...A14...or...?
Is it possible to do an IF formula based around a value it does not equal?
eg I have one column, that is perforning a SUMIF providing that a certain cell is equal to a particular constant.
=IF([cell]=[value],SUMIF([range],[criteria],[sum_range]))
In the next column I want to do it the other way round so that:
=IF([cell] DOESNOT=[value],SUMIF([range],[criteria],[sum_range]))
Is it just a simple symbol??
I have a simple formula which subtracts one cell from another. I then have an if and statement which checks if that cell is equal to zero. If so, continue processing.
The problem is that the formula always reads the cell as not equal to zero although the result of the formula contained in the cell does result in zero.
