I have a worksheet built that obtains info from Sheet1(ACV) and enters it into Sheet2(Payment1), however when I run the process, only Line 10 fills and then it stops. I need to loop the first statement of the code, so that it fills all of column 1 until there is no info to fill then I assume the rest of the code will fill in the worksheet accordingly.
View 3 RepliesI have the following cells set up in a worksheet.
I have the following formula set for each of the cells -
=IF(U5>1,U5-1,T5)
=IF(T5>1,T5-1,S5)
=IF(S5>1,S5-1,R5) and so on.
Serial No.1 Serial No.2 Serial No.3 Serial No.4 Serial No.5 Serial No.6
#VALUE!#VALUE! #VALUE! #VALUE! 1005 1006
The T5, S5 and R5 are (I thought) the "False" value which would be returned, but all I am getting (if for example T5 was blank) is #Value
I've created an equation but when it's false it returns a "0" I tried an IFERROR with no luck.
=IFERROR(IF(AND(C6>="",E6=""),"update system",),"")
The formula I am having issues with is:
=IF(L14="YES",IF(B14="","",NETWORKDAYS(B14,IF(AH14="",TODAY(),AH14),IF(L14="NO",NETWORKDAYS(B14,IF(V14="",TODAY(),V14))))))
I'm looking for formula to return a value based on the amount of networkdays between 2 dates.
Column L has a drop down for
"YES" and "NO"
If "YES" is selected then I need the formula to subtract AH from B (if B is blank I don't want the formula to return anything)
if AH has no date then I want it to use todays date.
If "NO" is selected then I need the formula to subtract V from B (again, if B is blank I don't want the formula to return anything)
if V has no date then I want it to use todays date.
The formula seems to work for everything as it is EXCEPT when L is "NO" it only return FALSE.
On sheet 3 column d i have a vendor number. I am trying to create a formula in column M (same sheet) that will say "True" if the vendor number in column d is also listed on sheet 2, column A (Rows 2-148)
View 2 Replies View Relatedif Statement A: =IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12) works very well
if Statement B: =IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12) works well too
now I am trying to say
=IF('Input Page'!B36="yes",(IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12),(IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12))))
Basically, if B36 is yes, use If Statement B, otherwise IF Statement A. If I write Yes, I get a "Value" error, if I change the yes to 1, I get a FALSE error.
=IF($T$50=Controls!$B$2),"GO",IF(AND($E$52=3,Controls!$B$3=1.3,$U$1=8,$AB$1>=Controls!$B$2),"GO","")))
Why do I get a FALSE statement with this formula when T50=1, i want it to be blank.
Write if statement or any other formula: if cell C3 is less then 0 then "over due", if = 0 then "due" and if more then zero then "not due yet" otherwise preferably nothing, because that would mean that the cell is empty.
View 6 Replies View RelatedColumn A: T/F
Column B: True/False
Here's what I want in a sentence: If one of the cells in grouped row is "T", column B = True, if not then column B = False.
(row groups are separated by a blank row)
Example)
Col A,Col B
TTRUE
FTRUE
[Code] ....
I came up with following formula:
=IF(MATCH(TRUE,INDEX(ISBLANK(A1:A17),0),0)>MATCH("T",A1:A17,0),TRUE,"")
It checks to see if blank cell is found before "T" but it doesn't look rows above.
inincubus.grouprows-1.xlsx
I have a worksheet called "Raw Data" where in columns J, I and G contain values. I would like to write a formula whereby if all 3 conditions are met, it will count the number of values found in column C.
I've tried to write an IF statement but it just returns FALSE, despite the result being true. Need the right combination of IF/AND statements that would do this?
=IF(AND('Raw Data'!$J:$J="Maintenance",'Raw Data'!$I:$I="Open",'Raw Data'!$G:$G="1-2008"),COUNT('Raw Data'!$C:$C)). I've tried to attach the workbook, but there's a problem with uploading attachments I think. Sorry if my explanation is unclear.
I'm trying to write an If statement that only changes the cell if it's true.
If its false it leaves what is in the cell alone.
This is what I have so far:
HTML Code:
=if(a5>=today(),"payment",----if not, don't change what is in the cell-----)
I'm looking to use an if/and statement to give back a true of false but it doesnt seem to be working, I'll give an example, I want excel to search a set of cells to see if its blank and another cell to see whats written there(from a pull down menu) and if both of them are true I conditionally format to go green, otherwise stay white. It works for one cell, condition below:
=AND(Anoop!B3="IIC",NOT(ISBLANK(Anoop!C3)))
but I cant get it to do this
=AND(Anoop!B3:13="IIC",NOT(ISBLANK(Anoop!C3)))
i.e search the entire column
I was also wondering if it was possible if it found an "IIC" in B8 how I could get it to check C8, D8 etc..
How to leave a cell truly empty if the criteria of my IF statements is untrue. Currently, I'll write something like:
[Code] ....
But for some reason, when I copy and paste the resulting range of values elsewhere (to rid myself of the formula that determined them), the cells that did not return a value (where the statement is FALSE), are not recognized by a "Go To Special > Blanks" request, until I select all of the "empty cells" and clear them manually. Yet when I try to do a search on the same range for an empty space, I get no hits.
I have an IF statement that I need to look at different cells and return different values if ture or false, depending on what is selected in cell J2
Cell D2
if J2 = "FMB/FPI" then retrun the value of cell Y7
if J2 = "FPI/FPI" then N/A
if J2 = "FMB/OTHER" then return the value of cell Y7
Cell E2
if J2 = "FMB/FPI" then retrun the value of cell AC7
if J2 = "FPI/FPI" then then retrun the value of cell AC7
if J2 = "FMB/OTHER" then N/A
Cell F2
if J2 = "FMB/FPI" then N/A
if J2 = "FPI/FPI" then N/A
if J2 = "FMB/OTHER" then then retrun the value of cell AC7
Perhaps a bit cryptic but here is where I'm looking for.
Cell A1 gets the value YES (or NO) assignment by the user.
Cell B1 has some calculated value let's say 4 based on the formula If(A1="YES";2+2)
Now If the user assigns "NO" to A1 the value of Cell B1 becomes FALSE (return value of second part of the If statement)
I do not want the value of B1 changed if A1=NO and to stay the same (4)
I have the following loop that should look through my rows of data for the Value "Y" in column T, for those rows that contain "Y" it should update column K with the variable xdate. For some reason it doesn't seem to work, it changes the first entry it finds and then seems to crash, I have to use CTRL+BREAK to stop it.
View 3 Replies View RelatedI have a formula in a cell which attempts to grab a value on another sheet that's dynamically changing in real-time (it's a live stock price changing in realtime via DDE). My objective is to grab this current live stock price when it is between the times of 10:30 AM and 5:00 PM, bt as *soon* as it goes past 5 PM, I want this formula cell to display the very *last* (ie.the one just before) value it had just before the time rolled over past 5 pm.
Here's my formula:
I am trying to loop through a range, checking for a cell to contain one of two characters and then put a value in a cell to the side (well 3 away) of it. Im getting an error for Type mismatch on line:
VB:
If CellContent = "h" Or "v" Then
the data in the cell is an along the lines of '12.34.56.43 som-thi-vh-ng1'
VB:
Dim MyRange, MyCell As Range
Dim CellContent As String
Sheets("Sheet1").Activate
[Code]....
how to get my LINEST function to work properly. Now, what I'd like to do is have it reduce or increase the order of the polynomial until R^2 equals 1.0, or the polynomial reaches 6th order, whichever comes first.
Can I do this with a bunch of nested IF ELSEIF statements, or is there a cleaner way to do this?
I have a code like this below
Sub Copydata()
Dim emre As Integer
For emre = 100 To 121
Sheets("CP TB").Select
ActiveSheet.Range("$B$8:$G$10000").AutoFilter Field:=3, Criteria1:=emre
Range("E8:F8").Select
[Code] .....
I want to skip values when the selection is a value I choose. I tried to put a "If" statement but I couldn't make it work.
The IF statement will check the selection after red colored code. if cell value is "a" then it will go for Next emre.
I am getting the Run-time error '380'. Could not set the value propery. Invalid property value.
I have a user form for data entry purpose which is working fine. Now, I am making a code for data editing purpose which pulls out data from the worksheet into the user form.
I am able to do this for text boxes and combo boxes that are not linked with each other. However I am getting a problem in the following case; I have a combo box and a text box that are linked to each other by combo box _change code which is below which may be the reason for the error I am getting for the next code...
Code:
Private Sub cmbColor_Change()
If cmbColor.Value = "Other" Then
lblColor.Visible = True
[Code]....
I have the following code which previously was showing an error on the Do While line. It was suggested that I change the line too Range("B2").Text. However, the loop is not deleting the rows based on "#N/A". Can anyone offer any suggestions?
Selection.Sort Key1:=Range("B2"), Order1:=xlAscending, Header:=xlGuess .....
So here is my problem:
how do you repeat a write statement four time
form 1234 to 1234123412341234
If ComboBox1.Text = " Market 1" Then
StoreNumList = Array ("66", "67", "107", "222") 'obviously array string is much longer than this
For x = LBound(StoreNumList) To UBound (StoreNumList)
StoreNum = StoreNumList(x)
ComboBox1.value = StoreNum
Call btnOK_Click_Process
Next x
Program runs fine first step through. It calls the btnOK_Click_Process sub routine just fine. However on second and subsequent For/Next cycles it does not call btnOK_Click_Process.
I am having an issue getting an IF statement to work inside a DO loop. I have Microsoft Excel 2007 and Windows 7 Entreprise.
In my Excel spreadsheet, I have in column B a list of keywords and in column C the category to which each keyword belongs. For instance, the keyword "boot" goes withe the category "Shoes", "scarf" goes in "Accessories", etc.
In another column, I have a list of product descriptions (like "Black Boots" or "Silk Scarf") and I would like to assign the relevant category to each product. I thought to do this by creating a new function in VBA. This function would go through the whole list of keywords in column B, checking if the keyword is included in the product description. If it is, the function's result would be the relevant category, and if it is not, the function would search the next line in column B, until a relevant keyword is found, or until the end of the list.
Here is the code I have written so far:
Code:
Function SegmentSearch(Item)
Dim i As Integer
i = 1
Do
i = i + 1
If Application.WorksheetFunction.IsNumber(Application.WorksheetFunction.Search(Sheet5.Cells(i, 2), Item)) = "TRUE" Then SegmentSearch = Cells(i, 3)
Loop Until Application.WorksheetFunction.IsNumber(Application.WorksheetFunction.Search(Sheet5.Cells(i, 2), Item)) = "TRUE"
End Function
Without the loop, the function works fine (if "Item" happens to include the first keyword in the list) but as soon as I try putting the loop I get a #VALUE! error.
My nested loop works as intended without If statements, ie it counts non blank cells in a series of 17 ranges (this loop is called the CountRangesOnEachRow loop) AND then drops down a row and repeats (this loop is called the RowNo loop). The problem is that once my first If statement occurs the RowNo loop fails and it stops at the first row.
The first If statement is designed to do the following:
1. Tests to see if A4 has data. If yes, copy cell contents (pupil's name) to Sheet(2).Range("StudentName")
2. If empty skip the countranges loop and move down a row to A5.
3. Cells A4:A35 need to be tested for data in this manner.
I've included a sample workbook & code with the IF statement comment blocked so you can see what it should do AFTER it tests the A column for data. The macro should end after row 6 as A6:A35 are all blank.
Setting value in For Each statement stars infinite loop. I am trying to get the following script to work
View 2 Replies View RelatedI think the problem is the order in which I have the "next" loops. I would like to evaluate the if statement below over a range of cells
Sub Analysis()
Dim i As Integer
Dim x As Integer
Dim y As Integer
Dim k As Integer
Dim TheLast As Integer
TheLast = Sheets("Name").Range("c" & Rows.Count).End(xlUp).Row
For i = -7 To -26 Step -1
For x = 24 To 43
For y = 14 To 43
For k = 16 To TheLast.................
I have a table arranged by columns into SETS of results. I am looking for a way to mark all the columns of a set as false if any one column of the set is false.
View 4 Replies View RelatedI am trying to Sum lines of info with "True or False" and "Yes and No". I would like to assign 1 to True and Yes and 0 to False and No when I total the rows. Never tried this in Excel, on Lotus and the formula does not work. I can find and replace, but I would like to be able to use a formula.
View 2 Replies View Related