The following macro does well at concatenating 2 constant values and the values in columns A and CF and places it in the CP field. What I need to know is is it possible to modify this code so if there is NOT a CF field cell value (that is it is blank) that the formula does not run and moves on to the next row? That is, the CP1 cell remains blank?
View 1 RepliesIn columnA I want to jump to the next blank cell in a list that continues to grow. So the first time I run the macro I want to go (blank) cell A5 to paste in some data. The next time I run it, it would need to go to cell A6 and so on.
When I do this manually, I simply hit ctrl down-arrow (takes me to the last cell w/data) and then one more down-arrow to take me to the empty cell below.
When I do this in the macro it seems to remeber the cell as an absolute reference (if that's the term) and so it just copies info in the same location as previous, instead of the next empty cell.
Hello there,
I am making a spreadsheet that tracks children's progress in school through the year.
I have a vlookup that turns their levels (2c,2b,2a,3c,3b,3a etc) into numbers so that the number of sublevels they have progressed during the year can be reported.
=IF(ISNA(VLOOKUP(E5,$AD$10:$AE$28,2,FALSE)),"0",VLOOKUP(E5,$AD$10:$AE$28,2,FALSE))
However, when children join through the year, they will not have data to go in the 'starting grade' box, so I was wondering if it would be possible to make vlookup see that cell E5 is empty, and so look in cell F5 instead. It might even, perhaps, have to look in cell G5 if they join the class after Christmas.
i need to have 6 or so cells copied and pasted into another sheet. (when a button is pressed) However before the data is pasted it checks if there is anything in the cell(s) that are being pasted into, if there is something then move down a line and paste. Here is the code i have already:
Sub Order2Invoice()
Sheets("OrderDatabase").Select
Range("B65536").End(xlUp).Offset(1, 0).Select
With ActiveCell
.Value = Orderform!G5.Value
.Offset(0, 1) = Orderform!E10.Value
.Offset(0, 2) = Orderform!E11.Value
.Offset(0, 3) = Orderform!E12.Value
.Offset(0, 4) = Orderform!E13.Value
.Offset(0, 5) = Orderform!E15.Value
.Offset(0, 8) = Orderform!E15.Value
End With
Sheets("Invoice").Select
End Sub
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
i am trying to create a forumla in a column (D in my expamle below) to count the number of days between two dates. Knowing that col D will change everytime the @now date changes - but thats ok..
COL A COL B COL D
ROW 1 Open Date Closed Date Count of days open
ROW 2 4/1/07 BLANK CELL Formula result here
ROW 3 4/1/07 9/5/07 Formula result here
if col b has a date then subrtract col a from b and display the # result, if col b is blank then subtract col a from location I store the @ now date - say Col ZZ Row 99? so no matter there is a count of number of days in every row in column D
i could do with:
move data up a row if row above is empty
move data left if column before data is empty
tia
add your top 10 if you like
I am importing a 20 character text string (from a barcode scanner) to H2. I need to send that data to the next unused row in Column A (after insuring that no matching text currently exists in Column A-no action taken if matching data is found). I can provide a copy of the sheet, along with a description of the project.
View 2 Replies View RelatedI am trying to find a macro that will filter on Column F (non-blanks - just cells with dates) cut just the filtered data (A:G inclusive)without the Header Rows and then paste/move this data to the first empty row on another sheet called "Complete"
So that I get the cells in columns A:G with dates in moved to the "Complete" tab and they are no longer in the sheet "Deliverables"
I've been using the record macro function to accomplish a lot of my formatting tasks for my work reports.
I'm running into a snag that I'm not sure how to fix. Essentially I want the program to recognized the term "Grand Total" and the cell to the right of it. Then I want those two cells to be moved to the far left.
The # of rows will continuously change but he column shouldn't change.
I've tried naming the cell selection to have it moved but I can't seem to make it work.
When I use the record macro function and do a CTRL F search for "grand total", excel doesn't seem to recognize that I want that cell and the cell to the right to be the ones to move. Instead, whatever row of cells I create the macro with, it wants to duplicate the move with the same exact cell.
I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
I would like to have an alert msg to prompt the user whether he/she wan to proceed to run the macro upon the macro button is pressed. However the alert msg will only pop up if cell value, A1 is not empty. In the alert msg, The user will have an option to choose to run the macro and do not run the macro.
Another question. I have a macro copy some data from other workbooks. I would like to alway return to a worksheet, named"Summary" after the macro is run. any way to do that ?
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View RelatedBelow is my the macro that I recorded. I want to copy and paste the same information to a new location everytime. The macro tells it to go to cell IV1, end left, then I want it to go right one cell regardles of the cell location. Here it tells it to got to ("K1"). It will do this everytime and I do not want it to go to K1, just move right one time and then paste the information.
View 3 Replies View RelatedI have an issue with groups of data in a row, that I need to copy into a new row beneath the original. I need a formula or VBA that will perform this function:
If any data is present in columns AG-AK, then copy that data into a new row below, into cells AB-AF. Also copy column B (this data is always present, it is the name of the project data contained in the original row)
If any data is present in columns AL-AP, then copy that data into another new row below, into cells AB-AF. Also copy column B (this data is always present, it is the name of the project data contained in the original row)
My code and see why it's not executing properly?
[Code] .......
I have a worksheet of approx 13000 rows and want to use a macro to delete a row if a certain cell is empty - is this possible?
View 3 Replies View RelatedI have the following macro
Code:
Sub del()
Dim myRange As Range
Set myRange = Range("AK3:AL3" & Range("AL" & Rows.Count).End(xlUp).Row)
For i = 1 To myRange.Rows.Count
If myRange(i, 1) >= myRange(i, 2) Then
myRange(i, 1) = ""
myRange(i, 2) = ""
End If
Next i
End Sub
How do I add a condition that will stop the macro if myRange = ""/is empty?
I'm looking for a macro that will search through E2:IV2 and take me to the first empty cell in that row.
I've tried a couple of things but none of them seem to do anything.
I am trying to write a macro which searches for a certain value (*?CNMT_LBID) in my worksheet, then copies it, plus the two cells to the right of it, to the first empty cell in the row above.
I have got so far, but am now stuck! I am not sure how to specify the row above my current cell, and then find the next blank cell to paste into.
Also, I'm not sure if my code is correct, any corrections are welcome!
Sub Move_Data()
'
Dim i As Integer 'for loop below
Dim rng As Range 'Cell to start 'cut' from
'rng = cell containing "*?CNMT_LBID"
Set rng = .Find(What:="*?CNMT_LBID", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False)
'Loop to cut cells "*?CNMT_LBID" plus next two columns to the right, and place in empty cell in row above
For i = 0 To 2
rng.Offset(0,i).Cut( )
Next
'delete now empty row
rng.Row.Delete
End Sub
I have an excel file that contains data from bank transactions.
In column A at irregular intervals is a cell with " User Group:" It depends on how many transactions there are in a batch, could be 1 or up to say 200 as to when the next "User Group" cell is found.
After that also in column A is "Item" then "Lodgement Ref" then at the end "Batch Totals"
i.e.
User Group:
Item
Lodgement Ref
Batch Totals:
User Group:
Item
Lodgement Ref
Lodgement Ref
Lodgement Ref
Batch Totals:
I want to find each instance of "Item" then move that cell and every cell over to column CK down to and including "Batch Totals" i.e. A3401 to CK3410 to CM 3400 so it lines up with the top of the transaction block.
There are over 60,000 lines so it's worth trying to find a solution as I can then use the methodology to make other refinements in the spreadsheet.
I have 'sheet 1' (data collection sheet) and 'sheet 2' (form filling sheet)
I've recorded a macro which sends data from 'sheet 2' to 'sheet 1' (linked to a submit button on 'sheet 2')
I want the macro to allow the next form filled information to be transferred onto the next line down on 'sheet 1'.
The current code is:
[Code] ......
I have a spreadsheet with sales figures for a company over a few months. I want to create a macro that will insert a new month after the last month. I have got it to work for the first month but after that it will just insert 2 black cells after.
i have a named cell called Average_slales_per_month that is next to the last month all the time.
I would like a simple macro that would actually move a cell based on criteria. In my case it would be: In row A, if a cell starts with 'Agent Name' then that cell needs to move down one cell replacing the contents of that cell.
View 3 Replies View RelatedI have a single workbook with five spreadsheets. My goal is to move data along a path (or work flow) from one sheet to the next by using a "trigger" pulldown menu choice.
Sheet1 = Prospects
Sheet2 = New Sale
Sheet3 = Upgrade Sale
Sheet4 = Won
Sheet5 = Lost
Sheets 1, 2, and 3 use the same data layout for column A - K.
Sheets 4 and 5 have the same A - K as above and also have columns L - R in common.
The last column in sheet 1, 2 and 3 is a pulldown menu (New, Upgrade, Won, Lost).
Data rows on each sheet start at row 7.
The goal is to use the pulldown choice to remove the data from the current sheet (ex: Prospect) and add it to the next open row in the required sheet (ex: New or Upgrade). I also need to be able to make a similar move from New/Upgrade to Won or Lost.
writing a Macro which will move data from a cell to an adjacent cell.
E.g Column B has only data in certain cells, I would like the Macro to work down the column and every time it encounters data in Column B to move it into the adjacent cell into Column A.
I want to create a macro to paste some data into the next empty cell. Below is sort of what I need but this show it going to a particular cell, I need it to got to next open cell in the range from say BY3. So next macro run it would copy and paste the data from T3:T9 (always this range) to BZ3 then CA3, CB3 and so on.
[[Sub CopyData()]
'
' CopyData Macro
' Copy The Data To Build Graph
'
[Code]....
I have the following Macro to transpose data from a column into succesive rows. I need it to repeat, until it has processed all data in column A / until it reaches an empty cell in A.
Sub Macro1()
'
' Macro1 Macro
'
[Code]....
I would like a macro that will select the 65536th row to be used to paste format from rows 2 to the last empty cell in column a.
View 5 Replies View Relatedthe code below works fine except for the fact that it takes FOREVER to complete as it has to loop through almost 2000 rows... How to optimize this code so the macro stops as soon as it encounters an empty cell? There is currently only 50 entries in the database, but with time it will exceed 1000 entries and therefore i can't simply say Range("H2:H50").
Code:
If OptionButton1.Value = True Then
'Show all Car Cases
Sheets("User-defined Database").Activate
For Each cell In Range("H2:H2000")
[Code]....