If Certain Cell Matches Number - Go To Sheet 2
Jan 31, 2014If A1 ever equals "1", I want Sheet 2 to automatically be displayed.
View 1 RepliesIf A1 ever equals "1", I want Sheet 2 to automatically be displayed.
View 1 RepliesI have two worksheets. First one is TchNfo. Next is WrkMnShp. TchNfo has a range from A2:A93 with info in columns A,B,C,D, & E.
Is there a macro that I can run where if I enter a number in WrkMnShp column A, the entire row that matches the number in TchNfo is copied to WrkMnShp?
I have several worksheets (Labeled Sheet1,Sheet2,sheet3) What I need to do is to step through each row in sheet3, and do a search in sheet1, it the data was found, then return the row number. I then will need to copy data from sheet1 (rowfound columnA , through rowfound CoulmnBd to sheet3 current working row columnK
View 3 Replies View RelatedI have worked on the code – with as limited knowledge as I possess – to perhaps communicate my intention. I know for a fact that in the code below there are 2 problematic lines – and herein lies the root of my problem. The first line is: “Dim Day As String” In Debugger speak, I am told that this cannot be done along with “Set sh = Worksheets(Day.Value)”. However, in normal speak, I am trying to copy data from one sheet to another. When pasting the data on the second sheet, I am trying to make the code find the appropriate sheet that matches a Day value in Cell I5. Getting the code to execute this one action is proving to be particularly difficult. I am thankful for any suggestion on how to get the code to work correctly.
View 14 Replies View RelatedOn a worksheet named Season Results, I have a list of venues in column A, and a list of dates in column B
I then have worksheets named with all the venue names.
On the venue worksheet, I want the corresponding date from column B automatically displayed in a cell.
What I am trying to do is, check if the value of c2 in update is the different to the value of c2 in original then run a code (for the moment just says msgbox so I know it works).
Code:
Sub what_needs_update()
'UPS = Sheets("Update").Range("c2:76")
'ORS = Sheets("Original").Range("c2:76")
For Each cell In Sheets("Update").Range("c2:S76")
[Code] ..........
Have numerous values in Col A. Col E extracts a list of unique values from that column.
In Col C, the Col A value has had characters added to it.
Need a formula to count the number of unique values from Col C which contain the same prefix from Col A, and place the result in Col F.
A sample workdook is attached with the desired result shown and highlighted in yellow.
I found code on this site after searching a long time that has worked well in a larger macro I'm writing for use in Excel 2003 usage. However, I'm stumped on how to achieve the following on the attached sample: find and remove the number in A2 from the list in E2 then count the individual numbers seperated by commas in E2 and post the results in G2 Repeat the same sequence for C2, D2 and F2
View 8 Replies View RelatedSheet1 is Main Sheet which never will be amended and these numbers will be a source for pulling mathematical functions
See attached :
Sheet1.png
Don't be bothered about cell colors etc. They are for my reference
Sheet2
Will contain same Problem Ticket numbers but different (or same) values with number of 'Linked Incidents'
See screenshot
Sheet2.png
Based on Problem ID 10248
Main sheet shows 92 Linked Incidents
Value on Sheet two brings 93
If A5 Sheet2 value can be found in ColumnA Sheet1, look for a number in ColumnC, same ROW and compare it to C7 in Sheet2 ?
Bring up difference value, which in this case would be one.
is it possible to have a cell return all matches from a list and have the list of matches reduce as you type, then be able to select one item from the list? this is a typical feature on internet sites, but can it be done in Excel?
View 3 Replies View RelatedI am using a userform to pull some data from a form that many different workers fill out. I have a button on the userform that automatically saves certain cell values in the form to a different workbook when they hit this button (they hit it every time after they are done filling it out)....The problem is that if they need to go back and make changes to the form they originally created, the workbook that has all the data will now have two entries for the same form number (when they hit the button it also saves the workbook as NCR####) but I only want the most recent one..
So what I need to make it so that if two numbers in column C (C2 and on) of workbook "NCR_Data.xls" match that this macro deletes the one furthest from the top (my code places newest entries at the top, in row 2).
I have a produced an Excel workbook which uses a VBA sign in/out userform.
Once you sign in on the Userform the sheets update. A list is completed of the times people enter and leave.
To make the code easier I currently have the name being returned to the excel sheet and performing a “match” function to return the row number. This row number is then used to carry out what I need to happen in this row. However, as you can see from attached doc (and the brief example below), based on IDnumber "2", the match function returns row 5 not row 8.
I need to have the row number returned for the IDnumber where the Out cell is blank.
This should be the last occurrance of the IDnumber
Example
Row
1 ID# In Out
2 1 9:00 13:00
3 4 9:00 13:00
4 3 9:00 13:00
5 2 9:00 13:00
6 5 9:00 13:00
7 6 9:00 13:00
8 2 14:00
After looking at other similar post titles I could not find a formula to work exactly proper.
I have attatched a sample of my problem. What I need is for cells E4:J4 to look for a match in cells B4:B16 and give a value of " Yes or No " in cell K4 if a match is found. Then copy down formula through E5:J5 to B4:B16 - E9:J9 to B4:B16. As my examples indicate Cells K4 would = yes, K5 = yes, K6 = yes, K7 = no, K8 = no, K9 = yes. Column D is the results, Columns E-J represents all combinations of column D.
I have tried the following formulas but they did not work entirely correct.
= NOT( ISNA( MATCH($b$4:$b$16, e5:j9, 0 ) ) )
= COUNTIF(e9:j9,"="&b4:b16)>0
I was given this new task this year. Normally this process is done by hand, by one of the managers, but since it now belongs to me, I look at it as being a little to tedious to do. So I would rather have excel do it for me.
We have about 5 CSRs who handle clients based on the first letter in the clients name. I guess to make this easier to update in the future if the macro would respond to a cell reference for the number of CSRs that would be great. I will need to perform this task Annually, and of course each time a CSR leaves or we hire another one. This way work loads are kept close to the same.
I have a list of letters in column A. Each of these letters has a corresponding number of clients in column B. I have been given the task to try to split these values equally between the 5 individuals. I know that since the numbers don’t all add up and divide equally it can’t be done easily by hand.
I have attached an excel file with what I have in the sheet. Sheet 2 shows what I would like to have as an example as output on the same sheet. (What I put on the sheet is an example of the way I want it to look, are not close to adding up to a "close to equal" total.)
Basically, I have a huge list of addresses with ID numbers, and a list without the ID numbers. An example would be;
2-10 (evens), test road, ID123.
I need to identify if the address is on the street, is in that block of flats (i.e between 2-10, and even number), and then return the ID.
I've already split the number between two cells, but then its all gone a bit wrong.
Column A = numerical IDs, multiple entries, may have duplicates that should only be counted once in comparison
Column B = numerical IDs, multiple entries, may have duplicates that should only be counted once in comparison
Need: 1 cell that compares all of the A range to all of the B range and returns a a percentage of repeats. So, if there are 50 entries in A, and only 40 are unique, and B includes 10 repeats (unique, not multiple), then the returned value would be 25%.
K so basically i have a cell where based on the above formulas it displays a number.
What i want it to do is only display a number if it matches one of the numbers in the 9 cells above it. so for example
cell1:2
cell2:4
cell3:6
cell4:8
cell5:1
cell6:9
cell7:89
cell8:0
cell9: 11
and i want the number to display only if it is one of the numbers shwon above.
Worksheet #1:
Column "A" going down (starting at A1 to A5) I have the numbers 1,2,3,4,5 entered in each cell...
Worksheet #2:
In cell A1 is the number "1"
In cell A2 is the number "7"
I want a formula in cell B1 (WS#2) that looks for the number in cell A1 (WS#2) in the range of cells A1:A5 on Worksheet #1, and if it finds the value of A1 (WS#2) in that range of cells on Worksheet #1, it returns the letter Y... if not it returns the letter N
So my result on Worksheet #2 should be...
Cell B1 shows the letter Y
Cell B2 shows the letter N
I have a chart in sheet1 with 4 Code (EXPL: 0349) in a cell A2 and in Cell B2 to b1900 reasons against cell a2 so i need all matches against a2 in Sheet2 cell a2.
View 4 Replies View RelatedI want to vlookup from sheet2 cell E2 to find all matches in sheet1 in coulmn G and add totals together in coulmn E. The match I am looking for is used in several rows of coulmn G on sheet1. I only want cell E2 on sheet2 to give me total amount from data in coulmn E of sheet1 when a match is found in coulmn G of sheet1.
View 9 Replies View RelatedIf I have these on Sheet 1
Name Age Cutoff
PersonOne 27 21
PersonTwo 21 20
PersonThree 19 19
PersonFour 17 20
generate/list/display on the next sheet (Sheet 2) of all the rows that has AGE less or equal to Cutoff, so on Sheet 2 based on the Sheet 1 data, I should get the following rows listed:
Name Age Cutoff
PersonThree 19 19
PersonFour 17 20
I have a Excel file with alot of data in it. I need a macro that will create a report for me and relive me from alot of manual work. The 1st sheet is named "Projects". This contains the search arguments. The 2nd sheet is named "Database". This is the sheet where I want to search in. The 3rd sheet is named "Report". This will contain the results of the search. So the going will be something like this:
Copy row 7 from "Projects" into row 7 in "Report". Then use the value in that row, column E (named Search code). Search for rows that has this value in column E in the "Database" sheet. Copy all those rows to "Report" sheet. Copy row 8 from "Projects", leave two rows of space and paste into "Report". Repeat the procedure mentioned above. Repeat this until reaching a row in "Projects" that has no value in Column A.
I have two sheets (sheet 1 and sheet 2). Sheet 2 has a range of data about employees. Column A contains a unique reference number with the rest of the row (Column B - Column X) containing corresponding data about that empoyee.
When I enter that unique reference number in Sheet 1, Column A, and matches the value in Sheet 2, Column A; I would like the rest of the corresponding row data (Column B - Column X) from Sheet 2 to populate 'automatically' (copied) in Sheet 1.
I have a workbook with two sheets imported from different sources. Sheet 1 is an AdHoc query from an Oracle 10g based program. Sheet 2 (PBIC 8 in my file) is a report generated from a property accountability program. The information from Sheet 2 is manually inputted into the Oracle program that generated Sheet 1.
I would like to have a macro that would compare the cell contents in columns "RegistrationNbr" (column S) and "SerialNbr" (column T) with the cell contents in Sheet 2 (PBIC 8). The match in Sheet 2 could be an identical match or part of a longer string. The matching cells in both sheets should be highlighted.
One thing to be considered is the column names in Sheet 1 will always be the same but the column letter designation may change base on the fields selected in the AdHoc query.
I didn't realize my file was too large and didn't upload.
In my spreadsheet, on the first worksheet called "Working". Column A, called "Results", contains carrot ^ delineated string values in each cell (i.e."john^apple^pear^banana^grape^love^heart^pickle"). The majority of string values in every cell in my "Results" column match a "source" column of Pick-List Values, called "Fruits" in the same spreadsheet, however found in a different worksheet called "Lists" (also in Column A). I want to perform 3 functions against my "Results" Column on worksheet "Working":
1.) Report In Column B: Analyze column "Results" by cell and return carrot delineated string values for only those that match my "Fruits" Pick-List
2.) Report In Column C: Analyze column "Results" by cell and return carrot delineated string values for only those do not match my "Fruits" Pick-List
3.) Report In Column D: Identify and return all unique values in "Column C" as a List.
Attached is a simple example of what I'm trying to accomplish called " Sorting.xls"
I am trying to find a formula that populates a room number based on the number of hours used. I have a chart that is by building but multiple rooms within each.
Where I am having trouble is when there are more than one room with the same number of hours used then sometimes the formula populates the wrong room number.
Attached is my example spreadsheet of my chart. Book1.xlsx
I have shown what I need, what I have tried and a blank space to show where I need it to go.
I need a macro to start at cell "A1" on sheet1 and then find that same value on sheet 2 in column B. Once it finds that value in sheet 2, the code would copy the row related to "A1" (A1:H1) into the row on sheet 2 with the value matching "A1" from sheet 1. Once it has done this I need it to do the same from A2:A598. I thought this code below was working but it seems to erase a row from sheet 2 if it is not present in sheet 1. I need the macro to only update the row if the information in column A on both sheets is the same. Here is the code I am using
Code:
Sub FindStr()
Dim rFndCell As Range
Dim strData As String
[Code].....
I've got two worksheets ("June" & "July"). On both worksheets, column A is comprised of ID numbers and column B contains dollar amounts. I need to compare the ID numbers in Column A on each worksheet, and if they match I want to copy the ID number and the amount to a third worksheet ("Results").
View 3 Replies View RelatedI have a workbook that contains 3 sheets. What i am looking to do is:
1. Use the names in Sheet 1 (Column A) and find the names on Sheet 2(Column E).
2. If there is a match, put the whole row that contains the match on Sheet 3
How can this be done?
E.g. say I want to create a list of cells each referencing to the first, second, third sheet, and so on.
Say, on one sheet cell A1 references to the second sheet's A1, cell A2 references to the third sheet's A1, and so on.
Ideally I'd love to be able to write something like
=Worksheet(1)!A1
=Worksheet(2)!A1
=Worksheet(3)!A1
and so on.