If I type the formula below into cell A1 and then drag it to cell A2 it correctly changes $A6 to $A7
CELL A1 =Planner!$A6*(BS8/20)
CELL A2 =Planner!$A7*(BS9/20)
I would like it to change $A6 to $A14 and then to $A22 as below. In other words adding 8 to the reference each time I drag it down.
CELL A1 =Planner!$A6*(BS8/20)
CELL A2 =Planner!$A14*(BS9/20)
CELL A3 =Planner!$A22*(BS10/20)
CELL A4 ==Planner!$A30*(BS11/20)
I'm trying to write a formula that will keep the Column ID static while allowing the Row ID to be reference. Each week my worksheet adds one line and the formula in question is moved one cell to the right and thus the formula cell makes the same move (1, -1). I need the formula to keep the column the same from week to week, while allowing the row to shift downward with the formula. I've attached a sample spreadsheet with the formula I derived. Check out the highlighted formula to familiarize yourself before running.
View 2 Replies View RelatedI'm having to copy formula on a tabulation sheet that compiles information from other worksheets, and I need to change the formulas in each row to refer to the successive worksheets. Right now I don't know any other way than changing the formula in each cell, and this is taking way too long.
Example:
One cell's formula: =COUNTIF('5'!$F$21:$T$50,TABULATION!C$5) In the next row down, I need it be: =COUNTIF('6'!$F$21:$T$50,TABULATION!C$5), then =COUNTIF('7'!$F$21:$T$50,TABULATION!C$5), and so on.
[URL]
COPYING indirect formula. When I copy, the lookup reference does not change. My formula is =INDIRECT("'"&$A247&"'!j106"). When I copy horizontally across cells, I want J106 to increase, ie j107, j108 etc. At the moment it remains at J106 and i have to manually increase the numbers by 1.
How do I change my formula so that the numbers increase automatically?
I have a spreadsheet containing quite a few lookups etc. I am trying to copy a cell across about 10 columns. This has to be done for about 50 different rows on about 20 different sheets, so I am looking for an alteration to the formula to help me rather than typing in the formula over and over;
='Basic Labour'!AD6*Rates!$E$526
Say this is in AD6, then in AE6 I would require
='Basic Labour'!AE6*Rates!$E$527
and so on across the region to be autofilled...
(It is multiplying the same cell in a different sheet against the 'next row down' in a rates lookup sheet).
In my data validation I have the following formula as the Source: =INDIRECT(SUBSTITUTE($F$2," ","_")). I want to be able to copy the cell and paste it into another cell and have the formula update to reference the new cell. Currently the validation is for cell G2 and references F2. I want to be able to copy G2 and paste it in G3-G6 having the formula update so it refrences F3-F6.
View 3 Replies View RelatedI am creating a spreadsheet which creates a bulk of data from a front sheet.
The question is:
Is there a way to automatically copy a fixed formula for 100 cells using one fixed cell reference such as $A$1 and then automatically after 100 cells replace $A$1 with $A$2, after another 100 with $A$3 and so on?
Explanation with Example:
For example, Sheet1 contains the words "Green Tree" in Cell A1 and Sheet2 will then place "Green Tree" into 100 different sentences such as:
Plant a Green Tree
Grow a Green Tree today
This would be created with the formula ="Grow a "&'Sheet1'!$A$1& " today"
After 100 different variations using the formula I want to change that formula to reference cell A2 on Sheet1.
I know if I place "Red Tree" in Cell A2 and use the formula ="Grow a "&'Sheet1'!$A$2& " today" I can do this manually using find and replace for the 100 cells, but I want to do this for 100 different variations of Green Tree to create a 10,000 different sentences so I'd need to find and replace 100 times!
I have a formula that I want to insert using a macro, so how do I iterate the * values in this line?
ActiveCell.FormulaR1C1 = "='Sheet1'!R[*]C[*]"
I am trying linking it and this what I am trying to do , need a formula for it.
E.g.
Sheet 1 cell J3= Sheet 2 cell K3
Sheet 1 cell J4= Sheet 2 cell K9
Sheet 1 cell J5= Sheet 2 cell K15
and so on.
If I ask anyone in my office they can easily tell me what the next line should be in this list. I can't figure out how to do it in Excel
=A5
=A10
=A15
?
So, obviously the cells are referencing column A and increasing by 5. That's it, nothing fancy. I have 5,000 cells to fill and it's increasing by 13 instead of 5 so I can't just do it by hand. If I highlight the first 3 and then drag down the next cell would say A8. Not even sure how they get that.
I've got a worksheet here that i need to update every week. The problem i'm having is that i have a table of values that's drawing values in from another larger table. For example in B9 the cell is referenceing the I2 cell in another sheet. When i pull down the formula in B9 i want the cell below to reference J2 and so on. In other words, I only want the alpha characters to increment. Tried messing around with dollar signs but it doesn't seem to be doing what i want.
View 2 Replies View RelatedI have two sheets in my workbook, and I am trying to reference one chart's value into the other. (attached)
I have referenced successfully by manually typing in the reference on row 2 for all values on Sheet 1:
Sheet 1 - C2 needs to reference Sheet 2 - B2. (Sheet2!B2) - no problem all the way across to F2. All those values are correct b/c I manually typed in the reference.
The problem comes when I just want to drag over that same formula to increment for the other cells. It's not incrementing the formula like I need it to.
So, Sheet 1, Row 2 shows how the correct values I need to pull over but was done in a manual way. Sheet 1, Row 5 shows how it increments incorrectly when I try to just drag/copy the formula over. What I need is for Sheet 1 - D5 to reference Sheet 2 - C3, but instead if I try and drag to copy the formula instead of manually typing it in, it increments when I drag reference D2 instead of C3.
I've got 2 worksheets in the same workbook.
Sheet 1 contains huge amounts of data - thousands of rows and multiple columns
Sheet 2 - I want to extract the data from sheet 1 column A into sheet 2 column A but only the data from every 21st row.
I want to be able to copy the formula automatically down, otherwise it will take hours to do it manually. So far I can only get the cell reference to increment by 1 each time after copying.
So what I'm trying to achieve is :-
Sheet 2 A1 = Sheet 1 A1
Sheet 2 A2 = Sheet 1 A22
Sheet 2 A3 = Sheet 1 A43
I have two workbooks open, Workbook 1 (W1) & Workbook 2 (W2)
W1 has the following data entered in about one of our clients:
A1= Client Company Name
A2= Client Name
A3= Client Address
A4= Client Phone Number
What I would like to do is the following:
In W2, when I enter (in any cell, but let's say C3 for example) that C3 = A1 (from W1), that I can automatically have the following cells D3, E3, & F3 filled in with the same information appearing in cells A2, A3, & A4 from W1 as well.
I believe this must be possible-- I just don't know the right formula & steps to take, to make this happen.
I have on a sheet, on say cell "J10" a formula "=A1"
Now suppose I to delete row 1, Then J9, which was formally J10, will now say "=#REF!" instead of "=A1"
Is there a way to maintain J9 (which was J10) to say "=A1" without giving a reference error?
I have a table of consolidated data that consists of the date at which certain payments occur and their amounts that other sheets need to reference to perform calculations. I am currently using the formula below to put the data under the correct date column. =INDEX(ImportedData!$B$10:$DB$10,MATCH(B3,ImportedData!$B$4:$DB$4,FALSE)). The problem that I have is that the INDEX range, currently B10:DB10, will need to change depending on the number of files that are consolidated ie with more files the row will increase.
View 2 Replies View RelatedI am trying to fill in reference cells horizontally but fix the column and increasing the row number as it fills. For examples I want to start my refence as "=A1" in cell B1. I want to copy this reference horizontally to column Z1 but want the refences to be A1, A2,...,A26. Excel only seems to increase columns when filling horizontally and rows when filling vertically. Transpose works but it's an array which would slow the spreadsheet down.
View 4 Replies View RelatedI am trying to insert formulas to my cells in different columns and then fill down the formulas as many rows as in the reference column. So far I have put my formulas in a macro but I seem to get problems with " and ' symbols. My macro looks like this:
Sheets("Sold Articles Database").Select
Range("U3").Formula = " =VLOOKUP(LEFT(K3,2),'Input Variables'!$A$48:$B$52,2,FALSE)"
Range("V3").Formula = " =VLOOKUP(K3,'Product datas'!$A$2:$C$10000,3,FALSE)"
Range("W3").Formula = " =VLOOKUP(K3,'Product datas'!$A$2:$D$10000,4,FALSE)"
[Code] ........
I'm using a template that has formulas using a $ sign to attempt to stop the ranges they refer to changing. The problem is, when I use the template (which involes Access importing some data and adding columns to the sheet the formula refers to in the process) the rows referred to in the formula change in line with the number of rows of data that have been imported. Only the row numbers change not the column headings. So for example:
=( SUMPRODUCT(((Workings!$H$3:$H$1000=Explanation!B9)+(Workings!$E$3:$E$1000="Buy")*(Workings!$J$3:$J$1000))))-998
becomes
=(SUMPRODUCT(((Workings!$H$511:$H$1508=Explanation!B10)+(Workings!$E$511:$E$1508="Buy")*(Workings!$J$511:$J$1508))))-998
I'm working on setting up a chart. The formula I'm using for cell B21 is this: =ROUND(F3,0) & " " & IF(E3<F3 ...
View 2 Replies View Relatedi have created a form that links to other sheets in my book but can't get the info to stay when goto enter next lot of info.
i've been told about incrementing it but i can not work it out
I am working in Excel 2010 on a windows 7 machine.
I have a years worth of data by day. I want to sum the values for each week.
For example, Cell B1 is: =sum(a1:a:7)
Cell B2 is: =sum(a8:a14)
Cell b3 is: =sum(a15:a21)
Is there a formula I can write that will increment the numerical portion of the cell by 7? If I drag down cell B1, the resulting formula is: =sum(a2:a8)
I know that I can use either =sumifs or =sumproduct to compare the dates and calculate based on that.
I tried: =sum(a1+7:a7+7) but that returns an error.
Again, don't propose solutions with either =sumifs or =sumproduct since I can already write those formulas.
I am working on a sheet that has dynamic data saved. For any new value, a new row is inserted. I want to add a counter or more like an index so that I can see the number of the rows. I know that excel has is on the side but, I want to be able to make calculations. Like average of the numbers. Lets say I have 512 rows added. I want to be able (automatically via vba) to set the average with a sum of the values/ 512 which will be the number of the code I am asking. So I want a code that will start with the number 1 at (lets say) cell B2 and it will go like B3=2, B4=3.... any time a new row with data is added.
View 9 Replies View RelatedI have a formula that I'd like to have increment by one, but I can't figure out how to do it.
Here's the formula:
=IF(INDIRECT("'Supervisor'!B"&ROW()-4)="Y",E12-D12,IF(INDIRECT("'Supervisor'!B"&ROW()-4)="N","0",IF(INDIRECT('"Supervisor'!B&ROW()-4)="","0")))
I'd like to have the -4 in the equation increment to -5 when I paste it to the next row without having to fix each one of them.
How to increment a formula with an If statement that transforms 2 values in time format and then as long as these two values keep beeing added in the cells the formula keeps active in the column.
I tried to apply the code for all the but this makes my file huge like 20MB!
You can check this on the file, go the "records" sheet, add the time in the "shift start" and "shift end" fields, then the difference value goes to "hours" in the sheet.
[URL] .....
I have the following formula in cell L51 of all sheets calculating the volume depending on the monthly index that is chosen from the drop down menu in a particular sheet. =If(MIndex=0, SUM(D33:L50),If(MIndex=1,SUM(D34:L50),If(MIndex=2,SUM(D35:L50), 0))). I am getting the following message and I do not understand what it is about.
Microsoft Office Excel cannot calculate a formula. Cell references in the formula refer to the formula's result, creating a circular reference. Try one of the following
I am having to write a vba code for a survey data captured code online.
I am attaching the code and the vba module that is suupose to do
following things
2) dELETES THE LAST 3 COLUMNS
3) Initial 6 letters from each cell (Q0001=) UPTO (Q00011=)
4)Inserts new row at top from Q1 TO Q11
5) Sorts data on Q6 (Faculty/Staff)
Before all this the i need to insert blank cells for questions that have not been answered and shift the cells right (condition 1) ....
I have a workbook with 70+ worksheets that pulls data from a single input sheet and I need to increment the cell references in each worksheet by 1. Is there a way to do that without having to manually open each worksheet and change the cell reference.
VB:
'Row 27 on worksheet 1 cell B27' =+Input!$D3
'Row 27 on worksheet 2 cell B27' =+Input!$D4
'Row 27 on worksheet 3 cell B27' =+Input!$D5
Thru worksheet 70
'Row 27 on worksheet 70 cell B27' =+Input!$D72
I have a sheet which needs to look up one reference and then fill a table with the rest of them.
EG:
Cell A1 contains '0091 911'!$E$2 (cell E2 contains value 100)
Cell A2 contains =indirect(A1) and displays value 100
I need a formula which will auto fill the remaining cells in the table.
eg:
Cell A3 fills to contain '0091 911'!$E$3 (row +1)
Cell B2 fills to contain '0091 911'!$F$2 (column +1)
so it needs to fill the Indirect reference and not =indirect(A1),=indirect(A2)....
Have table with five columns and five rows. The columns(C4:H4) hold Systems, Systems is a defined range, and rows (B5:B9) hold staffer names, Staffer is a defined range. Cell A5 holds period, by quarters, ie, Q1-Q4.
At present am using =COUNTIFS(Staffer,$B$5,System,C4,Q,$A$5). This works fine but as you can see I must change the Staffer starting reference $B$5, with each new row.
formula that changes column and row automatically as I drag down and across.