I am trying to link cells between two worksheets and am having some difficulty. For instance, in E17, I want the cell to reference cell H41 on sheet 2 and for F17 I want it to reference H42 on sheet 2, etc. However, using the formula =Sheet2!H41 when I cut and paste the formula it changes it to =Sheet2!I41 (ie it changes the column and keeps the row constant). I want to find a way to fill a large amount of cells this way and would prefer to not have to manually change each cell individually. I assume I would use the indirect( and the column( commands but can't seem to figure that one out.
to copying a formula from one column to the next adjacent column and also incrementing the 2 numeric values inside the formula. Please see attached sample.
One value increments with each new column whereas the other increments with each new row. Please see attached sample.
And in the last row there is the average formula which must copy the new column and average the new column.
I tried to create a Macro in attached but it did not work with formulas.
I am trying to increment a row when i copy it across columns. I have searched for a couple hours on how to do this, but I have not come up with a solution that I can understand that works for my situation.
I found this page, but I guess I am too novice to comprehend it. [url]
I would like the number in this formula to increment when i copy it to the adjacent column.
In my data validation I have the following formula as the Source: =INDIRECT(SUBSTITUTE($F$2," ","_")). I want to be able to copy the cell and paste it into another cell and have the formula update to reference the new cell. Currently the validation is for cell G2 and references F2. I want to be able to copy G2 and paste it in G3-G6 having the formula update so it refrences F3-F6.
I am creating a spreadsheet which creates a bulk of data from a front sheet.
The question is: Is there a way to automatically copy a fixed formula for 100 cells using one fixed cell reference such as $A$1 and then automatically after 100 cells replace $A$1 with $A$2, after another 100 with $A$3 and so on?
Explanation with Example:
For example, Sheet1 contains the words "Green Tree" in Cell A1 and Sheet2 will then place "Green Tree" into 100 different sentences such as:
Plant a Green Tree Grow a Green Tree today
This would be created with the formula ="Grow a "&'Sheet1'!$A$1& " today"
After 100 different variations using the formula I want to change that formula to reference cell A2 on Sheet1.
I know if I place "Red Tree" in Cell A2 and use the formula ="Grow a "&'Sheet1'!$A$2& " today" I can do this manually using find and replace for the 100 cells, but I want to do this for 100 different variations of Green Tree to create a 10,000 different sentences so I'd need to find and replace 100 times!
I am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.
I'm trying to download stock price history inside a loop and move the destination range over one column for each new symbol. I want to keep moving the results from the query over one column each time it loops through....
I'm trying to copy data from sheet1 to sheet2, once it's in sheet2 increment it so I can calculate a total/count/avg of the data. I have some code that isn't compiling and I think it has to deal with the range of where it's being pasted. Also - I'm confused on how to make the data increment on the other worksheet. I have everything else figured out. I've attached copies of my worksheet for visual aid.
Step 1: Enter Code in highlighted area - Select Submit Data Button Step 2: Fills incremented position on worksheet 2
See Code Below:
Looks like it's not reading the "Model" correctly. I keep getting the Else message "Wrong Model Entered...."
I changed the ModR to: ModR = Worksheets(2).Range("A:A").Find(Worksheets(1).Range("B3").Value).Row
I'm trying to use the following loop to increment the column width of a range of columns thus:
Code: NewWidth = 0 WidthIncrement = 0.5 For MyCount = 1 To 26 NewWidth = NewWidth + WidthIncrement Cells(1, MyCount).EntireColumn.ColumnWidth = NewWidth Next
If I set WidthIncrement to be an integer value, the code works correctly. If, however, I make it something like 0.1, all the column widths that the loop acts on are set to 0. I suspect it's something to do with how I'm declaring the NewWidth and WidthIncrement variables - they're currently set to Double. I know that I can have decimal values for column widths (e.g. 8.43)
I currently have a workbook containing 21 sheet, named from Day 1 through to day 21. This limits user to 21 sheets max and makes it untidy if less than the 21 sheets are required.
Had a brainwaave ( slow I know) but thought it would be better to copy and paste sheets as they are required, this I can do. My question is can I automatically through VBA increment the name of the sheet so day 2 is copied and pasted but sheet is named day 3?
I have a formula that I'd like to have increment by one, but I can't figure out how to do it.
Here's the formula: =IF(INDIRECT("'Supervisor'!B"&ROW()-4)="Y",E12-D12,IF(INDIRECT("'Supervisor'!B"&ROW()-4)="N","0",IF(INDIRECT('"Supervisor'!B&ROW()-4)="","0")))
I'd like to have the -4 in the equation increment to -5 when I paste it to the next row without having to fix each one of them.
How to increment a formula with an If statement that transforms 2 values in time format and then as long as these two values keep beeing added in the cells the formula keeps active in the column.
I tried to apply the code for all the but this makes my file huge like 20MB!
You can check this on the file, go the "records" sheet, add the time in the "shift start" and "shift end" fields, then the difference value goes to "hours" in the sheet.
I have two sheets in my workbook, and I am trying to reference one chart's value into the other. (attached)
I have referenced successfully by manually typing in the reference on row 2 for all values on Sheet 1: Sheet 1 - C2 needs to reference Sheet 2 - B2. (Sheet2!B2) - no problem all the way across to F2. All those values are correct b/c I manually typed in the reference.
The problem comes when I just want to drag over that same formula to increment for the other cells. It's not incrementing the formula like I need it to.
So, Sheet 1, Row 2 shows how the correct values I need to pull over but was done in a manual way. Sheet 1, Row 5 shows how it increments incorrectly when I try to just drag/copy the formula over. What I need is for Sheet 1 - D5 to reference Sheet 2 - C3, but instead if I try and drag to copy the formula instead of manually typing it in, it increments when I drag reference D2 instead of C3.
I have a workbook with 70+ worksheets that pulls data from a single input sheet and I need to increment the cell references in each worksheet by 1. Is there a way to do that without having to manually open each worksheet and change the cell reference.
VB: 'Row 27 on worksheet 1 cell B27' =+Input!$D3 'Row 27 on worksheet 2 cell B27' =+Input!$D4 'Row 27 on worksheet 3 cell B27' =+Input!$D5 Thru worksheet 70 'Row 27 on worksheet 70 cell B27' =+Input!$D72
Have table with five columns and five rows. The columns(C4:H4) hold Systems, Systems is a defined range, and rows (B5:B9) hold staffer names, Staffer is a defined range. Cell A5 holds period, by quarters, ie, Q1-Q4.
At present am using =COUNTIFS(Staffer,$B$5,System,C4,Q,$A$5). This works fine but as you can see I must change the Staffer starting reference $B$5, with each new row.
formula that changes column and row automatically as I drag down and across.
I am needing a macro to modify a cell reference contained in a formula. For example: I have "=B2" in a cell of my worksheet, and I need some code to select and increment that by 1 so it becomes "=B3". I know how to use the ActiveCell.Offset command, as shown below, to select a specific cell so that it can then be modified, but I can't figure out how to make the actual change. ActiveCell.Offset(rowOffset:=0, columnOffset:=-1).Select
I'm using a macro to update individual formulas in a sheet that contains data from external documents. (i.e. ='C:September[Book2.xls]Sheet1'!$AZ$1 + 'C:September[Book3.xls]Sheet1'!$BA$1 ) Every quarter I have to change the column references in this formula (i.e. $AZ$ will become $BD$ and $BA$ will become $BE$ and so on). Also I have to change the September reference to December etc (but I've mastered this already). My current code works well, but requires manual updating:
My problem with this method is that I need to automate the updating of ColumnReference1 = "BD" to ColumnReference1 = "BH" to ColumnReference1 = "BL" and so on and so forth. It's handy that the reference shifts across 5 columns, which remains constant. Ideally, I'd like to tell the macro to look at "AZ" then add 5 columns.
I'm trying to write a formula that will keep the Column ID static while allowing the Row ID to be reference. Each week my worksheet adds one line and the formula in question is moved one cell to the right and thus the formula cell makes the same move (1, -1). I need the formula to keep the column the same from week to week, while allowing the row to shift downward with the formula. I've attached a sample spreadsheet with the formula I derived. Check out the highlighted formula to familiarize yourself before running.
Sheet 1 contains huge amounts of data - thousands of rows and multiple columns
Sheet 2 - I want to extract the data from sheet 1 column A into sheet 2 column A but only the data from every 21st row.
I want to be able to copy the formula automatically down, otherwise it will take hours to do it manually. So far I can only get the cell reference to increment by 1 each time after copying.
Line (A1) asdfasdf Line (A2) adsfadsf Line (A3) asdfasdf
What I would like to be able to do is highlight the three columns and fill down, but I would like for it to increment and paste the next three lines filled like this:
Line (A2) asdfasdf Line (A3) adsfadsf Line (A4) asdfasdf
Then below that the next three lines filled like this:
Line (A3) asdfasdf Line (A4) adsfadsf Line (A5) asdfasdf
The (A1, A2, etc.) are cell ranges and already contain the concatenate function that pulls data from a different location. The problem I am having is when I
highlight and fill down, it doesn't increment the cell by +1 (Ex. A1 beomes A2) but instead by +3 (A1 becomes A4) the number of lines highlighted.
I am creating a training document for work; the sheet I'm creating is a summary sheet which works out how many people answered questions correctly, incorrectly (bringing in from another sheet), number of questions answered and percentage of correct answers.
Looks like: Correct: =COUNTIF(sheet1!E2:E36,"correct") Incorrect: =COUNTIF(sheet1!E2:E36,"incorrect") Number of questions answered: =SUM(C4+C5) (correct+incorrect) Percentage right: =SUM(C4/C6) (correct/number answered)
I need to drag these 4 formulas down into another 400+rows, however in the correct and incorrect formulas I need it to keep the 2:36 but change the e to f, g, h, etc.
I'm having to copy formula on a tabulation sheet that compiles information from other worksheets, and I need to change the formulas in each row to refer to the successive worksheets. Right now I don't know any other way than changing the formula in each cell, and this is taking way too long.
Example:
One cell's formula: =COUNTIF('5'!$F$21:$T$50,TABULATION!C$5) In the next row down, I need it be: =COUNTIF('6'!$F$21:$T$50,TABULATION!C$5), then =COUNTIF('7'!$F$21:$T$50,TABULATION!C$5), and so on.
I am working on a model for a school project. Time is in ColA, the number of events is in ColB.
Each event requires one person to work before and after the event. For example, if we assume that I need one person 30 min before the event, one during the event and one 15 min after the event - ColC shows the number of staff required. I would need a formula to calculate ColC. Basically I want excel to add the values of the rows above and below a value if it is within a specified time range
It gets a little bit more complicated unfortunately, the time requirements need to be dynamic - so one day it is 30 min before the event, but another day it could only be 15 min before but 30 min after the event etc.
I was trying to do this with a SUMIF formulas, but couldn't get it to work.
COPYING indirect formula. When I copy, the lookup reference does not change. My formula is =INDIRECT("'"&$A247&"'!j106"). When I copy horizontally across cells, I want J106 to increase, ie j107, j108 etc. At the moment it remains at J106 and i have to manually increase the numbers by 1.
How do I change my formula so that the numbers increase automatically?
