Match Column Names Based On Primary Key In Column A
Jul 17, 2014
The following code works to update the target sheet based on matching column names within the source sheet.
However, I would like to bolster this by not only updating based on matching field names, but also the primary key in column A. Meaning the data from the source sheet isn't always in the same order (based on primary keys) as the data in the target sheet. So I want to keep the order of the primary key in the first column and then update matching field names in column B through the last column where the primary keys match between the source and target worksheets.
Sub CopyDataBlocks()
'VARIABLE NAME 'DEFINITION
Dim SourceSheet As Worksheet 'The data to be copied is here
I have a sheet which I need to arrange and it looks like -
Column A Column B Column C Column D
[Code]...
the values in Column B, C , D , E & F need to be in new columns based on what we have in Column A associated with "1"
Output should be - Column A Column B Column C
[Code]....
so whatever is in Column A associated with "0" should remain in place whereas whatever is in Colimn A associated with "1" should get added to the new columns. 0 and 1 resembles the 1 Records which are used as a split to normalize the data.
I need to look up the name in E2 in the list in column A and if it matches then lookup name in F2 in list column b, if it matches then the corresponding number in column C is displayed in column G. If neither names are in the 2 columns the words"Not on lists" is displayed in cell in column G.
The other problem is one name is spelled two different ways I want it to look for both spelling before moving on to looking up the second name.
I started with this formula but I'm getting #N/A or "not on list" when they are on the list. I'm using ranges prod_sum is columns AthruC, Last_name is range BthruC. =IF(AND(VLOOKUP(F4,prod_sum,3,0),VLOOKUP(I4,last_name,2,0)),"not on list")
I am trying to get excel to search a workbook/(or worksheet if easier) for a matching unique value and fill in its associated data. My first workbook has the SKU (A) filled in but not the UPC (B). My second workbook has both the SKU (A) and the matching UPC (C) filled in.
I need to take both workbooks/(worksheets), compare the SKUs, and if a matching SKU is found, extract the UPC from Workbook 2 and fill in the UPC field in Workbook 1, and if no UPC is present in Workbook 2, then it leaves the cell in Workbook 1 blank.
I am trying to write a formula that says if a name is in a column of names put a 1 otherwise put 0. Should be a simple If, match function. I have attached a simple example.....
I have sheet1 that contains rows with names. I want to match those row names with the column names in sheet2, and then delete any column in sheet2 that does not match to sheet1.
I'm working on a project in which I have 50 states + DC listed by 2-letter abbreviation, and want to return a value in another column that will be a non-unique number (some will duplicate in the second column.)
Also need to do this same operation with first column (state) and third column, which also is comprised of non-unique numbers.
Hlookup, lookup & pivot tables seem to not be a fit for this.
I am having a little trouble with tying an index/match formula that would probably require an "if" portion to the formula as well.
If you take a look at the attachment, I'm trying to match column "G" to column "L" and then use the appropriate price according to the specified piece count in column "H" based on the table to the right.
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D. e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
I have a column containing names, blank spaces, numbers, a bunch of miscellaneous things. However all I want to do is extract only names, into another sheet, and not the numbers, blank spaces, etc. Youi'll see what I mean when you open the attachment. Offset isn't an option because the names don't appear in the column in an organized fashion.
i have a table in excel with 36 rows and 36 columns i.e. 36x36=1296 individual cells. Columns and rows have headers/labels i.e. 36 rows with row label headings and similarly 36 columns with column label headings. I would like to automatically create unique cell names for the 1296 cells based on where the columns and rows intersect using the row and column labels. The cell name format I would like to create is [ColumnLabel_RowLabel].
I've manually created the cell names in the attached file as an example of what i would am seeking (i've greyed the cells that I've done this for).
I am trying to create a summary Calendar that would display all the names of the people who are off on a given day. I have a grid where I display each day of the month and a person in the group has their own column. If they are out of the office for any reason their name appears in that row. In the big Summary Calendar cell for each day of the month I want to look across all the people columns for that day and then display the names of the people who are not going to be in the office. Can I do this by a formula or will using VBA work best.
I want to compare two columns. I would like to see if the contents of column B appear anywhere in column A, for any amount of rows, and if it does, to place the match in col C.
So in the example below, red in B1 would be checked in A1 through A1000 or however long A is. When any row has red, place that match in that row for C.
This would be repeated until all rows in B are complete.
I have an input box pop up to ask the user for a base item number. The way the excel sheets part numbers work for example is TM-T88VP-GRY, the last part 'GRY' changing based on the variation of the item that someone ordered. So, the base item number would be TM-T88VP, and what I want to do is search through a set column (Column G) and delete any row that contains that base item number.
i am trying to do is match 2 columns data based on a condition ie i have data in column "b" of sheet called "balance" data is variable this column has unique indentifiers i want to look at another column and match the uniques identifiers in another sheet if the cell value in column "D" = "please investigate" otherwise do nothing, the (column f) it will be looking up too is in sheet called "hi- port" so if cell value in column "d" of sheet"balace"= "please investigate" match values that are same from colum "b" of sheet "balance" to that of column (f) sheet called "hi-port"
i would like to colour only entire row of sheet called "hi-port" when the data matches to other sheet ie from columns "f " too " b". colour can be any colour igonre my ranges they are wrong just used as example
Sub start() Dim oWs As Worksheet Dim oRngCheck As Range Dim oCl As Range Dim cCola As Range Dim cColb As Range Dim rngIRd As Range Dim rngACs As Range Dim Match As Boolean Set rngIRd = Range("a1", Range("a65536").End(xlUp)) 'define the rang Set rngACs = Range("b1", Range("a65536").End(xlUp)) 'define the rang Set oWs = Worksheets("balance") 'change to suit 'starts at b2 to llow for header row.......................
I have a spreadsheet with two columns - one with names, the other with values. In some cases, the values column alongside a name is blank. Is there a formula-driven method (not a pivot table) that could produce a separate list of only the names that have a value in the value column? The formula needs to be dynamic, not produced via a filter.
I have a spreadsheet that contains data for a fiscal year broken out by month and quarter. I want the formula to return the data from that month and use whatever the latest quarter is. For example in the data below:
If it has only pulled data only thru Q1 it would return Q1 for Jan-Mar, however once I have Q2 data I would want the formula to return Q2 for the months of Jan-Mar.
2013Thru Q1STOLISTOLIJan-2013STOLI BASE 2013Thru Q1STOLISTOLIFeb-2013STOLI BASE 2013Thru Q1STOLISTOLIMar-2013STOLI BASE 2013Thru Q2STOLISTOLIApr-2013STOLI BASE 2013Thru Q2STOLISTOLIMay-2013STOLI BASE 2013Thru Q2STOLISTOLIJun-2013STOLI BASE 2013Thru Q3STOLISTOLIJul-2013STOLI BASE 2013Thru Q3STOLISTOLIAug-2013STOLI BASE 2013Thru Q3STOLISTOLISep-2013STOLI BASE 2013Thru Q4STOLISTOLIOct-2013STOLI BASE 2013Thru Q4STOLISTOLINov-2013STOLI BASE 2013Thru Q4STOLISTOLIDec-2013STOLI BASE 2013Thru Q4STOLISTOLIDec-2013STOLI BASE 2014Thru Q1STOLISTOLIJan-2014STOLI BASE
TAB X, Column A contains a data set, each row is a unique value. In column B of TAB X, I want to input a formula that performs the following logic: Search TAB Z, Column C, for an exact match of data contained in TAB X, Column A....and if found, look in TAB Z, Column D...if a blank cell is contained there, then in TAB X, Column A, say "Unsettled" ; however, if there does exist any character (not-blank) in TAB Z Column D, then in TAB X, COlumn A, say "Settled".....but, if the data ID listed in TAB X, column A is not found whatsoever in TAB Z, Column C, then say "NOT FOUND". So for example, within TAB X, Column A there is a unique ID in one of the rows "ABC123", then searches "ABC123" in TAB Z, Column C. If found, it looks in TAB Z, Column D and that cell is blank, so TAB X, Column B, same row that contains ABC123, the result is "Unsettled".
I needed to match the width a merged area of seven columns to a single column width (for row autofitting). Adding the column unit values and setting the single column to that value produced a significantly narrower width.
The documentation mentions that the column width unit is scaled to the font type and size and the absolute width is given in points.
This is set by the normal style setting in Excel Options or by VBA application.standardfontsize = 8 (in this case).
For instance, ten columns of Arial font 8 at 8.5 units you would think to be equivalent to a single column of 85 units. In points, the difference is 420 vs. 386.25, or 33.75 points.
Well, the standard character zero has a width at this setting of 4.5 points and 1 unit is 8.25 points, leaving 3.75 points for margins.
Then (10-1) margins allowances time 3.75 points resolves the difference.
Determining the margin allowances is straightforward, and reveals that the gradation with size is stepped by MS design. For instance, sizes up to 11 use 3.75 points for margins and increasing points for characters (except between 9 & 10). Sizes 12 through 18 use 5.25 points, 20 & 22 use 6.75, 24 & 26 use 8.25, etc.
I have created a table for this purpose, however I rarely use a "normal" other than 8, so I can probably use that set in programming.
I am trying to use a nested INDEX and MATCH array formula to return the value in column C when matching column A and column B, but with a few more criteria.
The range containing all the data
A B C
1 Cat 1 January 1, 2014 John
[Code] ..........
I am looking for the array formula to return the name of the person in column C who is in Cat 1 after the date in column B.
For example; C7 should return "John" because B7 requests "January 15, 2014", which is after the value in B1 C8 should return "John" because B8 requests "February 15, 2014", which is after the value in B1 C9 should return "Andrew" because B9 requests "August 15, 2014", which is after the value in B4
This brings back "John" as desired in C7, but when copying down the table into C8 and C9 both C8 and C9 return Andrew.
I guess this is due to my ">=" condition in the Match formula and it is returning "Andrew" because "Andrew" is also after the date requested, but I cannot for the life of me work out how to get it to work.
I need a formula to run down a column DCapture.JPG (starting at 142), when it finds the last entered value it needs to display the corresponding value from column J into cell AA21.
If you see the attached photo, the last entered data in column D would be 1, AA21 would be saying -30 (J205)
I have a tab that has 2 columns of data and I want to be able to return a value in column A if my data matches column B. If column B has the text TRUETRUE, I want to bring back the corresponding data in Column A. How do I return all the data in Column A for all the TRUETRUEs in column B? I can only get the first instance of TRUETRUE.
I have "systems" that have multiple "units". I what to sum values for units that have EXACT MATCH in the system column. Example data is below.
I am trying things like =SUMIF(B:B,"EXACT MATCH",C:C)
How do I express exact match? For example the first 3 in the list I would want to return a value of 9. Note: Lists can have up to 3000 rows and > 1000 system ID's.
