I’m looking for a formula which returns me the information from a row (for example in C2,D2,E2 etc.) to a column. So the information in B3=C2, B4=D2, B5=E2 etc.
Does anyone know how to do it with a formula?
Imagine I have 2 columns of information that look like this:
Column A
Column B
AS
Dog
AS
Cat
AS
Hamster
FT
Fish
These are my key columns. The letters are initials of people and the animals are the pets they're responsible for.
Now, I have 3 more columns that look like this:
Column D
Column E
Column F
These columns can go on for hundreds of rows.
What I want to do is pull out the information from columns D, E and F where the initials and pet match those in the key list, then paste that elsewhere (say to columns J, K and L).
So, for instance, the first entry would be copied across because, according to the key list, AS is responsible for a Dog, but the bottom entry for AS wouldn't because he was looking after a fish, and that pet isn't listed as one of his animals in the key list (Fish is listed alongside FT). Likewise, the entry for AH wouldn't come across because AH doesn't appear on the key list at all.
I am trying to find a macro that look for last non empty cell in column A and them paste a formula/comment in all cells of column B.
View 3 Replies View RelatedAll info goes to the master inventory and then if some enters an amount for respray then it is transferred to the respray sheet. when it is transferred to the respray sheet it put the date in Column A and then put 3 days later in Column B.
Every day it will change and the date in A1 changes to tomorrow but if another item is enter as having resprays then it transfers to the respray sheet and will bump down in column C but Column A stays the in the same spot.
I need Column A and B to move up and down if something in Column C moves up or down and it would be nice to always have the oldest date at the top.
I am attempting to Organize some data; however, I have run into a problem. I will paste a sample of the data that I have and explain the situation....
View 9 Replies View RelatedAm trying to put comments on column G based on information on column A. Column A contains a grade eg CDEF picked up from another sheet using vlookup. This grade is suppossed to be the same, but I have cases where I add a different grade say GHIJ to fill up my 99 required grades.Column G is for comments such as "Transfered" (which at the moment am entering manually)How can I use a formular so that each time I transfer from another grade other that the one intended it returns a comment "tranfered" on column G? Is it also possible to indicate the cell from which vlookup picked that grade on the same comment column G.
View 9 Replies View RelatedI Have a table in Excel that current look like this:
Name 1
Item 1, Item 2, Item 3
Name 2
Item 1, Item 2
With 650+ Rows. What I need it for it to look like this
Name 1
Item 1
Name 1
Item 2
Name 1
Item 3
Name 2
Item 1
Name 2
Item 2
There are about 20 Items that could be assigned to a name, They are fixed.
Is there a way to create a macro or series of macros the car make this change, as doing it by hand is going to take way too long.
I have column A full of test numbers, and column D is revisions the tests show up in (4 different versions). I would bring this spreadsheet down from 1800 rows to around 500 rows by making the info on D appear on one line in columns E,F,G,H, rather than four rows.
Example:
This
_A__|__B__|__C__|__D__|
1001|_____|_____|v1.0
1002|_____|_____|v1.0
1002|_____|_____|v1.1
1002|_____|_____|v2.0
1003|_____|_____|v1.0
1003|_____|_____|v1.1
1004|_____|_____|v1.1
1005|_____|_____|v1.0
1005|_____|_____|v1.1
1005|_____|_____|v2.0
1005|_____|_____|v2.1...................
I have an address list that I need to convert to 3 columns. How do I do this?
View 3 Replies View RelatedI have information in range A1 through z100, how do i put all the information in one column?
View 9 Replies View RelatedWhat I want to see is, is it possible to total up the number of times a specific phrase appears in a column using a formula?
I have a column of information generated from an outside source. The information in each row of the column is either "TRUE" or "FASLE".
Say I have 200 rows, I want to count the total number of times "TRUE" appears in that column out of the 200 rows.
If column F, G, H says PAP then I want it to return information from column A, B, C, D, E respectively into another worksheet. I have attached a sample
View 6 Replies View RelatedI am trying to use a nested IF to enter info into col A. It is based on 4 pieces of info, I can get the first 3 to work but am struggling with the last part. The problem is that I am looking at the same cell for the first 3 parts but the last part is looking at another cell reference. A nested IF may not be the way to go. An example of the spreadsheet is as follows:
A B C D AB
1 12/1/10 Comp 1 Surveyer 1 18/1/10
Omit 11/1/10 Comp 2 Surveryer 1 Omit
0 10/1/10 Comp 1 Surveyer 2
Comp 3 Surveyer 1
The formula I am currently using in column A is:
=IF(AB3="Omit","Omit",IF(AB3,1,"0"))
This works for the first 3 pieces of information but however does put a 0 in col A if there is no date in col AB, but this what I expect as it's what I've asked for. I am missing the last piece of information.
But what I want to put in column A is:
If there is a date in column AB - enter 1
If there is the word 'Omit' in col AB - enter Omit
If there is no date or the word Omit in col AB - enter 0 and finally
If there is no date in col B - leave blank (if there is no date in col B, col AB will always be blank)
I am having trouble getting my search information to show under the column headings in the listbox. My search reference is column E and I want to show the information for column F, I and A of the same row as the search match. Here is my code and a copy of the file I am using.
View 2 Replies View RelatedI have a set of training information in the rows, with dates under it which maps back to names of employee in the left hand side. How do I convert that to Name of Employee Training attended dates expiry date.
View 8 Replies View RelatedI need help with a formula so that I can create a single chart or (more likely) multiple charts for each of the choices in column C.
Attached is a sample of my spreadsheet.
I want to be able to break out each of the "Br#"(A) associated with the "BUM"(C) and graph each of the choices in column D (Run Time).
I am sure I can create the chart I need once I get the formula created to pull the data I am trying to combine. I hope that I have explained this well enough.
Previous question regarding dynamic ranges within a table to create a dynamic chart.
I've now come across another issue regarding the same table but creating a new graph to display a new graph. This time, I need the graph to only include labels with data in them.
The data is based on months including achieved targets and forecasted targets. I need to show a graph for the achieved targets to date and exclude any future months from the graph. e.g. For this month, I would only want to show January to July values and not include August to December.
How easy is this to do? I don't know how to use the OFFSET function but think that this might be a possible solution.
I have a piece of code that consolidates data onto one sheet.
Once the code has copied everything over, I would like it to also duplicate the Category field.
There is no option to add the duplicated column in the source information.
Here is the consolidation code:
[Code] ......
I have a column 'AE' that contains the html code for ecommerce item descriptions. While importing/exporting back and forth with another program and my spreadsheet, the following was added all throughout the descriptions.
%0d%0a
In some places, it may be three or four times consecutively
%0d%0a%0d%0a%0d%0a%0d%0a
Is there a macro script I could run to simply remove this any time it occurs in this column? It is just showing up as text and I am sure in another program it was representing something other than text, probably a space or hard return. Regardless, I don't need it.
See example below: ....
I am having problems finding a way to copy the contents of a cell and paste the content to a different worksheet on the first blank cell at the end of a column/row.
View 3 Replies View RelatedI have a workbook with many sheets, all of which derive information from the first sheet. On the first sheet, I enter values from say J1:J29. Each of these values is fed into one of the subsequent worksheets. I would like to have some code that would look at my range, determine which cells are used and print the corresponding worksheets. Write now I have a bunch of If statements that say
If Sheets("Worksheet").Range("j8") > 0 Then
Sheets("698-ALY W1222").PrintOut
End If
the problem is that it takes to long as each statement is evaluated and the print command sent.
The values in column J have names in column I and while the names do not exactly match the worksheets, a person could look at the name and match the correct sheet. For instance the name in column I that corresponds to the worksheet name 698-ALY W1222 is 698/ALY.
Thanks
Bryce
Need to trimming certain information contained in 1 cell and putting them each in a column. I could do left, mid & right but this time there is inconsistency in the content of the cell.
I've attached a file which will further give you an idea exactly what I want (formula to be in Column M to P).
I need a macro to move specific information.
I get an excel sheet with W/C Employer: (whatever) entered below the patient it belongs to in column E. This information needs to move into its own column (H) in line with the above patient information so I can use it in a mail merge to word.
The same thing needs to happen with WC injury date listed in column G. It moves to column I. Then delete the row it was moved from so I don't have an empty row.
Sheet 1 is what I get. Sheet 2 is what I need to end up with.
Check the attached sample file
a. actual data in columns is approx 150 items (that is why i need to hide/unhide columns)
b. there are about 120 persons whom above items are issued depending on expiry of life of item i.e. issue date plus number of months mentioned in row 3. for example if coat was issued to John on 5th Jan then it's life expires on 5th May and so on.
Now what i want
1. by clicking hide checkbox only that specific column should hide or if i click Hide All check box all column in range should hide.
2. as i enter issue date expiry of that item should automatically update on corresponding month sheet i.e for above example 5th May should automatically get entered in sheet May.
I have entered sample data manually in months sheet.
aJITCBP.xlsm
I have inserted the sheet. As you can see in Sheet 1 I have the Store, Address, Town etc, I would like a drop down box in D13 ( Store Name ) so when I select a store it will automatically fill all the info into D15:D19 Address, Town etc. The info will be pulled from Sheet 2.
View 3 Replies View RelatedI am new to using Macros and have not had great progress building a macros to make my life easier.
What I am trying to do
-In my main database tab 'FW Telecom' Use column A ( a set of numbers) to create a new tab based on that number, with a 'FW' infront IE ( column A shows 11, i want the tab to read FW 11)
-I want to create one for every number in the column
-Then I would like to copy my 'Template' tab to each new tab.
-From there I would like to fill in the information in the new tabs from the main database tab 'FW telecom'
-Since they will all be copies of the original template, i figure i can just get it to pull from the first column A and then fill in the info.
Not too much in theory going on here, just take my database and move the pertinent information to a user friendly look which I set up in 'template'
I have been able to produce a column that gives me key date information. I might have many empty cells in that column before it hits another date. I need to get this data over to another sheet and place it in a row.
I am trying to get it to look like this:
B2(value), C2(value),D2(blank),E2(Value),F2(Value),G2(blank) etc depending on how many more elements are found in the sheet.
I am able to find topics that allow me to copy a range of data but not one that will allow me to copy a range then skip a cell.
I have created a userform that allows input of information and then deposits the information on a specific sheet. I am looking for a way to have that information not only deposited on the specific sheet it is already set to but also to another sheet based on a selection made from a combo box.
here is my current
My workbook contains several worksheets each recording the results of equipment tests - one sheet for each piece of equipment. Rather than open each worksheet to check the date of the last test, other 'overview' worksheets pick up and display the last test date from each equipment record using the formula =MAX('sheetref'!A15:A500). Is there a better formula to do this?
Some items of equipment are tested at more than one frequency, ie Monthly, Yearly, etc. Therefore, the entry on row 15 of an equipment record may be column A 28/10/08 column D 'M' and row 16 column A 29/10/08 column D 'Y'. The above formula will only display the last test date, irrespective of frequency. There is a seperate overview sheet for each test frequency therefore, I need to modify the formula so that the date it copies from the equipment record worksheet to the overview worksheet is the date of the last test for the specified frequency.
I would like to automatically color fill a series of rows based on like information from a single column. When the information in the column changes then the rows would either stop filling (this would be best) or fill with a different color until the information changes again.
Summary: series of alternating rows would either be filled or unfilled based on changes from the column information.
Hope this isn't too confusing. Below is an example except I would want the cells filled, not the text or numbers to change. The highlight is changing based on the changing of the numbers.
ABCD 12345
ABD 12345
ABCD 12349
ABDF 12349
ABCD 12358
ABF 12358