I have a cell that has data like the following: ab 4111 / nw 2652 / ev 8741 up to 5 or 6 entries in the cell. If I just want 1 of these entries say the ev 8741 how can I have that be the only data that remains in the cell?
View 9 Replies
I have created a userform that allows input of information and then deposits the information on a specific sheet. I am looking for a way to have that information not only deposited on the specific sheet it is already set to but also to another sheet based on a selection made from a combo box.
here is my current
Basically I am trying to create a worksheet in which everytime I input information into Sheet 1, it is copied into Sheet 2. I want to have each entry in succession on Sheet 2 such that my first entry would be on Row 2, second on Row 3, third on Row 4, etc. However, everytime I put something new in Sheet 1, it just overrides the information in Sheet 2.
Basically I type in ticket sales in sheet 1, it calculates the prices and keeps a transaction log in sheet 2. But everytime I do a new ticket sale, it just overwrites the previous transaction witht he new transaction information. I've pasted my VBA below:
Sheet 1 VBA:
Code:
Option Explicit
'Form level variables - used in more than one event
Dim intAdult As Integer
Dim intStudentSenior As Integer
Dim intBalcony As Integer
Dim intChild As Integer
Dim sngAmountDue As Single
[Code] .......
Sheet 2 code:
Private Sub cmdSummary_Click()
'Declare Variables
Dim intCount As Integer
Dim i As Integer
Dim intAdult As Integer
Dim intStudentSenior As Integer
[Code] ......
I have a Formula question which I can't seem to figure out. I want to set a cell so that when two other cells are above 80 then the cell is green.
If one of the two cells is bellow 80, the cell turns to yellow and if both are bellow 80 then the cell is yellow.
I'm trying to build a macro that copies the information from cell D2 and then special pastes it into the next free cell on that specific row (as the information is from a vlookup so don't want to paste the formula) - ideally I'd like it to paste from H2 onwards but can move the spreadsheet around if that's not possible! I'd then like to do this for every row until there is no data in a row.
I've been using the below which I've found on the internet but this only pastes into column H and then just goes down the column rather than across the row, and I can't figure out how to do this.
Sub Summarize()
Range("D2:D25").Select
Selection.Copy
Sheets("Pot 2").Select
lMaxRows = Cells(Rows.Count, "H").End(xlUp).Row
Range("H" & lMaxRows + 1).Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Range("D25").Select
End Sub
I have spread sheet with 2 tabs (MASTER LIST & CYCLE COUNTS), on each tab I have 2 columns(LOCATION1 & DATE1 and LOCATION2 & DATE2) I need to verify if I any cell from LOCATION1 is repetead on LOCATION2 and copy the informacion from DATE2 to DATE1. then if I update the CYCLE COUNTS sheet I want the MASTER LIST update by it self.
This is the formula that Im using but Im having problems with the range..... =if('Master list'!$A2$:$A$15000='Cycle counts'!$A2:$A$15000, 'Cycle counts'$B&2:&B&15000,0)
I have this information available.
test.png
And what I want to do is use this information further down in my excel-sheet. So whenever I plot in "Location 1" I want "Security" and "John Johnson" to magically come automatically.
Like this : test.png
how do i separate information like this:-
01/08/2007,09:54:27,27.05,27.06,27.05,361300
let say its in cell A1 & i want first information before the First , to appear in B1 which is 01/08/2007
then the information before the second , to appear in C1 which is 09:54:27
and so on
I have several thousand cells where I need to pull out some information at the end of each cell. So for the examples listed below, all the information resides in the "A" column. For example:
M55116/14-5 CONN,RECEPT,6 PIN,U-228 TYPE B EA A AS 17 85.00 1,445.00
M39029/30-222 CONTACT,#0,RED-RED-RED B EA A AS 96-0327 46 6.75 310.50
M39029/44-288 CONTACT B EA A AS 93-0852 400 2.18 872.00
I am trying to pull off (starting from the end) all of the information to the first space. So I would like the following results returned: 1,445.00, 310.50, and 872.00. Can anyone recommend if there is a Function or equation that I could use that would pull everything from the end of the cell until the first space?
I receive a workbook on a monthly basis and it arrives in csv format. I need to format it and split it into several pages prior to sending to managers. I'm comfortable with the vba for formatting and splitting it into several pages but I have a problem with some cells that always have data in them in the same (incorrect) fashion.
how to go about fixing these cells and then I can get on with writing that into the macro.
Currently looks like:
A || B || C
No requested || No Supplied || Percentage
4 || 4100%
12 || 875%
6 || 350%
Should look like:
A || B || C
No requested || No Supplied || Percentage
4 || 4 || 100%
12 || 8 || 75%
6 || 3 || 50%
I was thinking of some kind of Left() formula to extract the leftmost character and place it into it's new cell BUT realise that sometimes I might need to extract 2 (or perhaps even more) characters.
I'm trying to extract information from one specific cell, and place it into another. This other thread kind of does what I'm looking for. I wish to extract from the following; "20/04/2009 5:42:51 AM". Placing the date in one cell, and the time in another. All spacing within the quotation marks is respective of the cell. Obviously dates and times would vary.
View 4 Replies View RelatedI have a table in the format:
MR A MR B MR C MR D
01/01/06 1 3 7 8
02/01/06 2 5 4 4
03/01/06 3 9 5 7
I want a formula to analyse the entire table (Which can change) and to
return me who has achieved the Max value and on which date.
The answer here should be MR B on the 03/01/06.
I can’t seem to work out how to pull data relating to a particular title from one spreadsheet, to another, separating the information on.
For example, column A lists names, and column B lists tests scores for each person. However each person has done several tests, and the tests are listed in one cell, separated by a carriage return (not comma etc, so can't do a delimited function).
I want to create a new spreadsheet with names still in column A, but the test scores separated. So Column B = Test one, Column C = Test two, Column D = Test three, etc. In each column I would like only the test score listed (so not the test title - I will put this in the first row as the column header)
Is this possible?!
How to input information into one cell and it appears in another cell based on specific information inputted.
View 3 Replies View RelatedI have copied from an email a very long list of emails but they all end up in one single cell
sample: eyee@gruposhahani.com; laroyeimport@gmail.com; sjimenez@vsjimenez.com; yhwh_shekhinah@hotmail.com; sparcells@formatec.com.pa
and would like to know if there is a way I can quickly create a list separating each email into a different cell. I was thinking of using a MID formula or maybe an INDEX or MATCH, but cannot figure out how to make it work.
Is it possible to pull only certain information out of a cell?
I have in cell A1 (As of 6-30-12 and 5-31-12) i would like to put a formula in cell b1 to pull just (6-30-12 and 5-31-12) so that everything i change A1 B1 will also change.
I've done some basic ADA-programming before that in my head can solve it, but as I said, I'm not quite sure VBA can do the trick...The problem I have is that I have a worksheet that consists of a combination of empty cells and values. For each cell with a value there are 5 more values unique for that cell that can be found at other parts of the worksheet. My job right now is to sort all this data..To do that, i would like to create this; Array_all_orders = (rows, columns) where every "cell" in that array contains a variable that hold those six values..
Here's the code I have so far:Sub Order_Array()
Application.ScreenUpdating = False
Dim Array_all_Orders() As Variant, Order_Width_Array(0 To 5) As Variant
Dim No_of_Rows As Long, No_of_Columns As Long
Dim Array_Row_Counter As Long, Array_Column_Counter As Long, Counter As Long
ActiveWorkbook.Sheets("RO").Activate
No_of_Rows = Range("A5", Range("A4").End(xlDown)).Cells.Count - 1
No_of_Columns = Range("K4", Range("K4").End(xlToRight)).Cells.Count
ReDim Array_all_Orders(1 To No_of_Rows, 1 To No_of_Columns)
[Code] ..........
=IF(Week1!G38>Week1!G37,1,0)+IF(Week2!G185>Week2!G186,1,0)+IF(Week3!G111>Week3!G112,1,0)+IF(Week4!G111>Week4!G112,1,0)+IF(Week5!G111>Week5!G112,1,0)+IF(Week6!G186>Week6!G185,1,0)+IF(Week7!G186>Week7!G185,1,0)+IF(Week8!G75>Week8!G74,1,0)+IF(Week9!G112>Week9!G111,1,0)+IF(Week10!G223>Week10!G222,1,0)+IF(Week11!G38>Week11!G37,1,0)+IF(Week12!G222>Week12!G223,1,0)+IF(Week13!G111>Week13!G112,1,0)+IF(Week14!G149>Week14!G148,1,0)+IF(Week15!G112>Week15!G111,1,0)+IF(Week16!G75>Week16!G74,1,0)+IF(Week17!G111>Week17!G112,1,0)
Now all I want to do is copy this info from cell C8 to D8 but with the exception that I want to change the > to
I am trying to tie two worksheets together. If text found in one cell in sheet1, make the same cell on sheet2 different color.*
There is a catch... no formula can occupy the cell in sheet2.*
My question is, is there a way of have a formula in completely different cell that will eventually fill the cell on sheet2 with proper information?
To explain a little better, I am trying to tie the sheets together, same cells and everything so when information gets put inside the cell on sheet1 the same cell on sheet2 will change color or display different information, and vice versa. That is the reason no formulas can occupy those cells.
i need to get some information (price) automatically put into another cell when an item from a drop down list is selected, i have attached a workbook to show what i need to do,,,basically if i choose an item from a list in cell a1,,i want cell b1 to show the price of the item,,,and the item is referenced from sheet 3 as well as the price.
View 2 Replies View Relatedi am working on a spreadsheet that is doing two things 1) its allowing the user to choose between 1 to 3 number or N/A from the list validation option and 2) there is a checkbox if one selects that all the columns that have the formula will become N/A irrespect of data in it.
I am using the following formula in the list validation option
a3 is the check boc
E5 =1
E6= 2
E7 = 3
E8=N/A
=if(a3=true, $E$8, $E$5:$E$8)
The issue I am having with this is, if I start selecting something from the drop down and half way I realize I need to check the box, it will only make it E8 value for the cells I have not touched and the ones I have already selected the drop down value it will remain. However I want it to override the value to E8 irrespect.
I need to have a cell (Total) but I need to be able to enter the information which all the subtotals are inputted into that area and will be the subtotals of the total. I have two areas that I will need to keep a running total of for each job #.
I'm not sure how to find out how to do this as I'm not that advanced with excel.
I am trying to create a drop down list that shows the description of different codes. i.e.
1000 - Straight time
1010 - Vacation Time
1020 - Sick Time; etc.
In the spreadsheet, I only want the number to show (1000, 1010, or 1020).
I have two worksheets, one named Data and one named Index. In column G of Data, there is an index number. In column G of Index, there is a list of special index numbers.
In columns A:F there is information about each special index numbers.
What I need is in Data, if the index number of column G exactly matches the value of a special index number in Index Column G, put the column A:F information for that row in the row with matching index number in Data.
Data Worksheet
A
B
C
D
E
F
G
1
header row
[Code] ......
I need to be able to put the formulas in A2 to F2 and just drag the formula down all ~5000 cells of Data, and only need the information put into the ~ 20 special rows, determined by the index number in column G.
My question requires me to do a Vlookup question that needs to get the information in the next two cells over from the left most cell. In short I need to put info from two different cells from the same row and look up value into one cell.
View 2 Replies View Related Here is what is supposed to happen: when the macro button is hit, today's date will appear in the first blank cell in row 3, then the text "late" in the next cell, then finally "1" in the next cell.
I have been trying to use .end(xlright) but i can not quite get it to work.
I have a userform that searches a data base for an address an pulls up the corresponding information. I was wondering if there was a way to get it so that if I put 1234 5th Street when it puts the information into the data base it would separate it into two cells so 1234 would be in one section and 5th street would be in another.
View 1 Replies View RelatedIf I have 2 columns (A with data to be extracted, B for output). And 11,000 rows of data. How do I take information from column A and out to column B. For example, I want to identify characters in Column A, for example I want to identify "A" "#" and "SQ" to output. For example If column A, has "A" then Invitation, If column A has "#" then Business, if column A has "SQ" then square
Column (a)
A10
extract to
Column (b)
Invitations
Column (a)
#
extract to
Column (b)
Business
Column (a)
SQ
extract to
Column (b)
Square
=IF((C13>E13)*AND(B15>D15),0,1)*OR((E13>C13)*AND(D15>B15),0,1)
This function seems to work well, however there is one thing I want to add to it somehow, and I can't seem to make it work. I want the cell to show a zero if there is no information in cells C13 and/or E13.
if there is an Excel function out there that will copy over the contents of one cell into another by what is typed in another cell. Did that make sense?
Lets say that I have info in
(A1) John (B1) Smith (C1)X (D1)
Now I want to be able to copy over A1 & B1 to another part of the spreadsheet/workbook if I were to type the words "leave" into D1.
So basically it would look something like this...
(A1)John (B1)Smith (C1)X (D1)leave (want info to go here---->) (M4)John (N4)Smith (O4)currently on leave
And then have it automatically add the names below the one in M4-O4. so it would add names in M5-O5, M6-O6, etc
I have this spread sheet that has over 1000 names on it & it would help out alot if I could just use a function that could copy the information to another part of the spreadsheet or another workbook.
I know that I can use the filter, but I may want to have this stuff on another worksheet alltogether.
Also, if this is possible, is there a way that it can be automatically removed if I were to delete the word "leave" from the cell?
