I have this information available.
test.png
And what I want to do is use this information further down in my excel-sheet. So whenever I plot in "Location 1" I want "Security" and "John Johnson" to magically come automatically.
Like this : test.png
I have a workbook with two sheets. The first one, let's call it the Main sheet, will be used to keep track of the touring artists of a record label. The second sheet contains a list of show venues with their respective contact info. Here's what the two sheets look like :
Main sheet
mainsheet.jpg
List of contacts
listofcontacts.jpg
What I would like is row D of the Main sheet to autofill, according to the contact information contained in row B of the List of contacts, when I enter a venue name in row C of the Main Sheet.
I have a workbook sheet change condition that, when triggered runs the following code (amongst others).
[Code] ......
What I would like is to amend the above (possibly in a loop?) so that it skips the rows in which the value "New" features in range F17:F190.
So basically Autofill as per the code but leave the values in the cells of the range in which New features in range F17:F190
In cell A12 the format is mm-###. Based on the mm (2 digit month) in cell A12, I would like cell B12 to auto fill the last date of the month as mm/dd/yyyy.
View 4 Replies View RelatedI am trying to do is have a VBA automatically fill a blank cell with text of a different color.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("B8") = """" Then
Range("B8") = "Name"
End If
End Sub
Is what I've been trying to get to work. If the value in B8 is suddenly deleted, I want that cell to show "First Name", in a lighter grey. I know I can get the color of the text by using the conditional formatting, but how do I get that cell to auto-fill when deleted?
I have searched the forum a few times and haven't seen an exact example of what I am trying to do, so I hope this isn't a duplicate.
I am looking for a macro to copy a cell and autofill it down the column until it gets to a non-blank cell. When it reaches that cell it needs to then copy THAT cell down until it reaches another non-blank cell... this could happen just a couple times, a couple dozen times, or only the very first time.
So for example:
In cell B2 there is text "Data1"
In cell B13 there is text "Data2"
In cell B25 there is text "Data3"
I would like the macro to search column B to find "Data1", and then copy it down the column until it reaches B13, then copy "Data2" down until B25, where it would then copy "Data3" down until the end of the document. The location of the data in column B varies, and the number of cells with data in column B will vary as well.
I have an excel file that contains two sheets. Sheet2 contains rows of different types of products with each of the columns containing details about the product.
On Sheet1, I have setup a data validation list in which a certain cell contains a drop down box that selects a product from the first column of all the rows on t from Sheet2. I used
I current have code that fills in textboxes in a userform with values in cells:
Code:
Private Sub CODE_Change()
Dim ws As Worksheet
Dim fm As Worksheet
Set ws = Worksheets(ActiveSheet.Name)
Set fm = Worksheets("Form")
[Code]...
How to I modify the lines under Checkbox1.Enabled = False so that they only take a section (of varying size) of the text in a cell and put it in textboxes in a userform?
ie. The text in a cell is "Outer: A123 ; Inner: B456." I would like A123 to appear in a textbox called OuterColor and B456 to appear in textbox called InnerColor
DATA
DATE
PRICE
DATA
20120621
118.1000
[Code] .......
I have 3 columns (data, date & price). What I would like to do is find the last populated cell in 'date' column and autofill it based on column 'data'. The tricky thing is that the date form is text and while autofilling manually it changes.
How can I auto fill a range while leaving the cell number the same?
Code: =IF(AND(B4>=c2,b4=c2,b4=c2,b5=c2,b6=c2,b7=D2,b4=E2,b4=F2,b4=G2,b4=H2,b4
I want a range to be filled based on 2 cell values in my sheet. The autofill range should be filled based on the values in the input range. For instance in cell A1 I place the value 1 and in cell A2 I place the value 10, then the macro should automatically fill in the numbers from 1 to 10 in another column. If I change for instance the input values to 5 and 15, then the autofill range should fill up the numbers from 5 to 15.
View 4 Replies View RelatedI'll do what I can to explain this mess I want to clear up...I have a series of excel reports I have to download and work thru daily and I need to see if there is a code to autofill down thru a column, based on multiple statements throughout the column..here goes:
f1 msp
f2 msp
f3 blank **
f4 mct
f5 mct
f6 mct
f7 blank **
f8 cci
f9 blank **
Regardless of the actual f cell, I always will need to fill the Blank ** cell w/ the values from the previous cell....Hope this makes sense...& thanks in advance....
have_a_cup@cox.net
In the attachment, I have two different workbooks named 1099 and SJC. What I would like to automate if possible is to have Column F in 'SJC' autofill by matching the Vendor # (Column A) values to the '1099' Account Number (Column A). The values that need to be copied cover are located in Column C. Hope that is clear enough.
As an example:
I've highlighted one row in yellow to show what I need done. For Vendor No. A1W01 from '1099', the value I need copied over to Column F of SJC is 920.61. I need this automated because I have a collection of files like this that I need to link in this way and they are all quite large (the attached versions are stripped in order to meet the size requirements at this forum).
I have two formulas which I'm using: =180*(120.5-1)/119.5 and =90*(60.5-1)/59.5
In the first example, I want to replicate the formula across row 1, but with the value '1' incrementing by 1 each time, upto 240.
In the second example I want the '1' value to also increase by 1 for each cell down column B, up to 120. when I try dragging the formula down or across, I am only able to replicate the formula exactly as in the initial cell (ie. the '1' doesn't change). I've tried using the $ symbol, but this doesn't work. I don't fancy doing this manually for a total of 360 cells!
I have two worksheets in the same workbook. In Sheet1, I've got a whole bunch of stuff that I need listed, like names, addresses, phone numbers, etc. What I want to do is pull the values of only the names, which are listed every 42 spots, and put them into a list on Sheet2. So, for example, in Sheet1, A1 is a name, A43 is a name, A85 is a name, etc. In Sheet2, I want to list only the names. And if there isn't a name yet, I want a blank cell. I've sorta figured out how to do it, but I get a problem with the values not incrementing correctly.
So, example code would be
=IF(ISBLANK(SHEET1!A1),"",A1)
=IF(ISBLANK(SHEET1!A43),"",A43)
etc.
The problem is when I drag the auto fill, the next values it gives are
=IF(ISBLANK(SHEET1!A3),"",A3)
=IF(ISBLANK(SHEET1!A44),"",A44)
Instead of the
=IF(ISBLANK(SHEET1!A85),"",A85)
=IF(ISBLANK(SHEET1!A127)"",A127)
....
that I want it to give.
is there anyway to get the values to go up like I want them to, or do I have to enter them all individually? That would really not be fun for me, so I hope that's not the case.
I have a workbook which has one sheet "Raw Data" where I will cut and past blocks of data of various numbers of rows. Another sheet "level one calcs" conducts various calculations on the raw data. I was wondering if there would be any way to create a macro which would copy down (autofill) the last row of my my calculation page for the exact number of rows I added into the raw data. The goal here would be so that I dont have to highlight and copy down the formulas on the calc sheet each time I add in new data.
View 3 Replies View RelatedI would like to enter a long line of data (text & numbers) into a single cell and have the single cell data populate successive horizontal data fields with automatically. The single cell data would have properties that would correspond to specific properties in the successive fields. The single cell data would remain unchanged. The successive horizontal cells would be looking for a specific piece of the single cell data.
View 1 Replies View RelatedI recorded one for an autofill series which basically came out as
View 4 Replies View RelatedFor our attendance register, the master data table holds a list of all club members (one member per row).
The master data table consists of formula columns, data columns, and two data columns with drop-down list validation.
I'm using this
I want to have a range of days in a cell, for example in cell A1 will have may 2-may 9. when I use the autofill handle I want A2 cell to read may 10 - may 17 and then if I use it again A3 will read may 18- may 25 and then roll over to the next month . As it stand right now if I put in may 2 - may 9 and use the autofill handle the next cell down will read may 2 - may 10.
View 2 Replies View RelatedI am working on a large volume spreadsheet comprising of the usual mailing list fields such as first name, surname, company, address1, address 2 , suburb, state, postcode etc etc
Is there a way for Excel to auto fill a line of details (or display a list the matching entries)?
this way, i can start to enter a semi-unique field such as surname, company or address and a list of matching entries pop up for me to select the best fit.
I then would fill in the remaining data.
I try to do something like this
VB:
Sub autofill()
Range("A1").Select
Selection.autofill Destination:=Range("A1:A1048576 "), Type:=xlFillDefault
End Sub
but i need to select first cell in every 20th column and then execute autofill till the last row that excel provides. I can only do this manually but I have for now 125 columns to fill or to write some monstrous code. Unfortunately I do not have the knowledge to do this in a smart way and I guess there is an elegant way to solve this problem.
I have an Excel file for work that has the following:
Column 1 is Agent
Column 2 is Interval (in 15 minute intervals from a report that I pulled)
Column 3 is Agent Calls (has a number anywhere from 1 - the highest currently is 19, which tells me how many calls that Agent had on that 15 minute interval.)
What I have currently is that if it says:
John Doe 15:00 5
It will automatically insert rows after the number based on a # -1, so it will add 4 empty rows after this row.
I have another step that will automatically copy Column 1 and Column 2 to the blank rows directly beneath them until it reaches a cell with data.
Now, what I need is a macro that will take Column C and where it says 5 automatically know to change that to '5a' then proceed to go down the list with 5b, 5c, 5d, & 5e. If it sees 4 it will know to change that to '4a' then proceed to go down the list with 4b, 4c, & 4d. I currently have numbers ranging from 2 - 19.
I have built custom list with this information so if I change all the numbers from 4 to 4a or 19 to 19a and double click on the black box it will autofill exactly like I want but it only goes down to the next cell with data, and I have 100+ lines per agent, and up to 21 agents a day, so this gets time consuming.
Here's how it looks when I'm ready to start the macro:
JohnDoe - Doe, John15:00 x
JohnDoe - Doe, John15:15 4a
JohnDoe - Doe, John15:15
JohnDoe - Doe, John15:15
JohnDoe - Doe, John15:15
JohnDoe - Doe, John15:45 4a
[Code] ......
And I need it to look like this:
JohnDoe - Doe, John15:00 x
JohnDoe - Doe, John15:15 4a
JohnDoe - Doe, John15:15 4b
JohnDoe - Doe, John15:15 4c
JohnDoe - Doe, John15:15 4d
[Code] ........
Copy and paste the formula into a range or paste a formula into the first cell in the range and autofill down for remainder of cells?
P.S. when autofilling down, can I specify somehow for it to stop at the last row with data in adjacent cell?
I have created a userform that allows input of information and then deposits the information on a specific sheet. I am looking for a way to have that information not only deposited on the specific sheet it is already set to but also to another sheet based on a selection made from a combo box.
here is my current
how best to do this (bare with me I'm not quite a pro at excel yet!). I'll attach my doc (JMP Excel Forum) so you know what I'm taking about. I've set up the data to work in a similar way to this, as you can see I've a table set up (Appliance Sheet) which feeds information to the Main Sheet which contains the drop down lists.
What I need it to do is autofill the wattage column (Main!F8 onwards) with the wattage for the device as described in Appliance!N3 or N4 for example. For the wattage column to equal 28 (equivalent to Appliance!N3) then the following would show in the dropdown selections Type>Computers SubCategory>Monitors Device>BENQ G2222HDL Status>On
Is there a way to do this with the set up I have?
I did have a previous version of the whole worksheet that each Device had its own table and I looked up the wattage using and If formula to lookup a info on the device and knowing where to look it up based on the subcategory
=IF(ISERROR(VLOOKUP(D7,IF('Main UI'!C7="Heating_Cooling",Appliances!$A$7:$B$14, IF('Main UI'!C7="Kitchen_Bathroom",Appliances!$A$16:$B$27,IF('Main UI'!C7="Monitors",Appliances!$A$52:$B$62,IF(C7="Computers",Appliances!$A$64:$B$68,........
And I got it to work but it was getting to cumbersome to add in new devices and update the formulas. If attached that doc (OLD) so you know what I'm talking about. The last two sheets are the same sheets that make up the new document (JMP Excel Forum)OLD.xlsm
I really prefer the new way I've got it set up. Its easier to add new information or options to the dropdown list
Basically I am trying to create a worksheet in which everytime I input information into Sheet 1, it is copied into Sheet 2. I want to have each entry in succession on Sheet 2 such that my first entry would be on Row 2, second on Row 3, third on Row 4, etc. However, everytime I put something new in Sheet 1, it just overrides the information in Sheet 2.
Basically I type in ticket sales in sheet 1, it calculates the prices and keeps a transaction log in sheet 2. But everytime I do a new ticket sale, it just overwrites the previous transaction witht he new transaction information. I've pasted my VBA below:
Sheet 1 VBA:
Code:
Option Explicit
'Form level variables - used in more than one event
Dim intAdult As Integer
Dim intStudentSenior As Integer
Dim intBalcony As Integer
Dim intChild As Integer
Dim sngAmountDue As Single
[Code] .......
Sheet 2 code:
Private Sub cmdSummary_Click()
'Declare Variables
Dim intCount As Integer
Dim i As Integer
Dim intAdult As Integer
Dim intStudentSenior As Integer
[Code] ......
I have a Formula question which I can't seem to figure out. I want to set a cell so that when two other cells are above 80 then the cell is green.
If one of the two cells is bellow 80, the cell turns to yellow and if both are bellow 80 then the cell is yellow.
I have a cell that has data like the following: ab 4111 / nw 2652 / ev 8741 up to 5 or 6 entries in the cell. If I just want 1 of these entries say the ev 8741 how can I have that be the only data that remains in the cell?
View 9 Replies View RelatedI'm trying to build a macro that copies the information from cell D2 and then special pastes it into the next free cell on that specific row (as the information is from a vlookup so don't want to paste the formula) - ideally I'd like it to paste from H2 onwards but can move the spreadsheet around if that's not possible! I'd then like to do this for every row until there is no data in a row.
I've been using the below which I've found on the internet but this only pastes into column H and then just goes down the column rather than across the row, and I can't figure out how to do this.
Sub Summarize()
Range("D2:D25").Select
Selection.Copy
Sheets("Pot 2").Select
lMaxRows = Cells(Rows.Count, "H").End(xlUp).Row
Range("H" & lMaxRows + 1).Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Range("D25").Select
End Sub