Insert Formulas With Vba
Jan 22, 2008
I've got a large excel spreadsheet that is used for cost calculations and I need to be able to replace the formulas in three specific columns with the value of 0.01. I also need to be able to change the values back to their original formula. My problem is getting the formula back into the cell. The formula begins with "=IF(And" which seems to be where I'm getting most of my errors. So right now I run the code and the value of the cells in the three columns change to 0.01 and when I run it again I'm getting errors. Here is the formula. How should I be entering this in VBA to get this line into my cells? The row numbers will be changing as I go down, but the rest of the formula does not. =IF(AND(E48<>"",AH48<>0),(AH48/E48)*100,0)
View 3 Replies
ADVERTISEMENT
Jan 5, 2009
There 2 columns, 1 in which you input data and the other which has a formula which uses the data to do a calculation. There are about 30 rows already filled in.
When I go to insert a new row of data, the formula just appear after I type in the input column. If I click on the cell where the formula appeared before I typed in the data, there was no formula there. It is almost like an autofill, excel knows that I am going to copy down the formula. (It also copies down the formatting)
View 4 Replies
View Related
Dec 19, 2007
I have a workbook with a worksheet called Summary that has formulas that refer to other worksheets (say A, B, and C) in the same workbook.
What I want to do (with VBA because I have to do this many times) is copy this Summary worksheet into several other workbooks, all of which also have their corresponding worksheets A, B, and C.
I do *not* want the copied Summary worksheet's formulas to refer to the old workbook. If I copy the worksheet by hand, this is what happens.
Instead I want the copied worksheet's formulas to reference the worksheets of the workbook they are now in.
View 6 Replies
View Related
Jun 23, 2013
delete rows of a report which contains $- or zero value but not row with Beginning Balance. Data begins from Column B to Column E. Some records may need to be deleted completely from Account Number down to Subtotal rows plus one empty row, if the Subtotal amount is $- or zero. Below is the sample data and how the finished sheet should look like. The report will comes in thousand of line. I don't have knowledge in programing but believe it can be done through VBA.
Account Number
211-00-5936-00-001-3-00-2-00
Trans. Date
Doc. No.
Trans. Line Comment
Actual Amount
[code]....
if Subtotal is $0, then delete the row starting from Account Number to Subtotal plus one empty row
211-00-5936-00-002-3-00-2-00
Trans. Date
Doc. No.
Trans. Line Comment
Actual Amount
[code]....
View 2 Replies
View Related
Mar 19, 2008
Macros that will insert formulas into cells, and I've been able to modify the macros to insert additional (simpler) formulas well enough on my own. But I can't seem to find the pattern of where to put the quotation marks! Here's the macro code that will enter my formula, including the formula (and the portion of code that the debugger highlights):
r.Offset(, 1).FormulaR1C1 = _
"=VLOOKUP(rc[-1]"",""'Blend List'""!""A2"":""E250"",5,FALSE)"
And here's the code in it's entirety:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim r As Range
If Intersect(Target, Columns("d")) Is Nothing Then Exit Sub
Application.EnableEvents = False
ActiveSheet.Unprotect
For Each r In Intersect(Target, Columns("d"))
If r.Row 1 Then
If Not IsEmpty(r.Value) Then...........
View 9 Replies
View Related
Dec 13, 2011
Writing a macro to insert two columns with IF formulas into a Worksheet. The 2 columns to be added would be after Column G on Sheet 1.
The new Column H would be
"=IF(G1>=Q#,G#/Q#,0)"
And the new Column I would be
"=IF(G#>=Q#,MOD(G#,Q#),G#)",
Where # represents the row number.
View 3 Replies
View Related
Jul 13, 2009
I was searching through this site and found this macro ...
View 9 Replies
View Related
Jul 19, 2006
I need to paste the format and formulas of the last row of data into a new row beneath it. I've seen a bunch of different end row functions, but which one is best and how do I only paste the formulas and formatting?
View 8 Replies
View Related
Feb 12, 2008
I have a macro that searches a column for a date and then selects the appropriate date. The next step is to then copy the row and insert a new one below the copied one and paste only the formulas and none of the data. I have tried several iterations but all of the seem to paste the data too.
View 6 Replies
View Related
Feb 5, 2014
I have a simple command button in my worksheet that will insert a blank row and copy formatting, but not the formulas. How do I adjust the code so that the formulas are copied to the new blank row? This is currently what I have:
Private Sub CommandButton2_Click()
Sheets("WAWF Track").Range("A9").Select
ActiveCell.EntireRow.Insert Shift:=x1Down
End Sub
View 5 Replies
View Related
Dec 17, 2009
I am creating a time sheet for a supplier & when the supplier enters a date into column A I would like a new line to be inserted below & include the formatting, formulas & data validation from the row above.
View 7 Replies
View Related
Apr 11, 2007
What I need is to insert a row at row 59 and autofill the formulas including drop down list from the above row. This is what I have so far (Thanks to Reafidy and shg).
Sub ChkDates()
Dim c As Range
Dim DelRng As Range
Dim ArcRng As Range
Dim i As Long
Dim l As Integer
Application. ScreenUpdating = False
Worksheets("Report").Activate
For i = 60 To 8 Step -1
Set c = Cells(i, 33)
If IsDate(c) Then ..............
View 9 Replies
View Related
Feb 23, 2014
I am brand new and I don't know a ton about macros and programming in Excel.
What I'm trying to do here in this attached spreadsheet is at the end of inputting my line, I want to hit the tab (marked in red to make it clear where) button in the cell and have it automatically create another blank line but keep the formulas the same.
Basically I just want to avoid having to right click and insert line and then drag the formulas column by column down which is difficult.
See attached : TEST2_2014 Sales & Commission Spreadsheet.xlsx
View 5 Replies
View Related
May 28, 2009
I'm running a macro that opens another workbook and read data from it.How can I incorporate this code into my macro.Sorry i don't knwo VBA.
Workbooks.Open Filename:="C:Documents and SettingsmsimantbDesktopINFRACHEM_POLYMERS - DON''T DELETE.xls]Sheet1"
UserGRP_MAcro Macro
Rows("1:3").Select
Selection.Delete Shift:=xlUp
Columns("A:B").Select
Selection.Delete Shift:=xlToLeft
Columns("B:E").Select
Selection.Delete Shift:=xlToLeft
Columns("A:A").EntireColumn.AutoFit
Rows("2:2").Select
Selection.Delete Shift:=xlUp
Range("B1").Select
ActiveCell.FormulaR1C1 = "Existing userGroup"............................
View 2 Replies
View Related
Dec 3, 2013
I am using a lot of linked reports that have to be rewritten each month. For example smaller formulas look like this:
=('S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$228*2)+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$262+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$292
What I want to do is extract the file path from the above formula and make it a composite of several cell references.
So what I need is to have a cell where they can change the month and another where we can change the year. So I set up several named cells that look like this:
_MONTH =11 November
_YEAR =2013
_JOBCARD ='S:PUBLICProductionJob CardsMOLDING
_PATH =_JOBCARD & _YEAR &"" &_MONTH
I tried several versions, I am hoping for something like this:
=('_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$228*2)+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$262+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$292
View 4 Replies
View Related
Dec 15, 2008
I've found a few macros that will automate changing cell references from absolute to relative and they work great. However, when I run the macros on formulas that have references to another worksheet or workbook, the macro will not work correctly.
View 9 Replies
View Related
Dec 11, 2013
I'm trying to automate creating certain keyword combinations I need, based off of the values I input into reference cells in columns A - E; the goal is to compile a list of keywords which I will then use to track my rankings in search engines.
I'm looking to only output 500 keywords, so some of the cells in columns A, B, C & E will not contain data (column D will always have a primary Geo-target listed). This results in some of the concatenate formulas I've created outputting partial data (i.e. if there is no data in cell A10, and cell D2 contains the word "Knoxville", then cell I10 will output the data, "Knoxville "). How can I setup conditioning formatting or a formula so that these auto-generated cells appear blank if one of the reference cells has no data within it?The reason why I need the above to work is because I want to setup a formula that automatically counts the # of keyword combinations created by the data entered into any of the reference cells. With the partial combinations being listed, it skews my data. Which leads me to my next question: what is the best formula for counting the # of cells containing a full keyword combination from any of the cells listed in columns G - O (minus the data in the header cells; i.e. G1, H1, etc...)?Lastly, is there a formula I could use that would then aggregate all of the full keyword combinations within the "Complete Keyword List" column (column P)?
View 11 Replies
View Related
Jan 10, 2013
I am running Excel 2007 on Windows Vista Business 32 bit. Recently I have noticed that if I enter a formula into an empty, unsused cell, it is recognized as a formula. If I modify that formula, it is then recognized as text and does not work as a formula. The only way I can get the cell to recognize a formula is to delete the cell and start over. This same scenario does not occur on previously stored workbooks. I have checked all of the flags that I know about, including the Options function.
View 3 Replies
View Related
May 13, 2008
I have a macro running this code to strip out unwanted formulas and formatting.
Sub Quote_Wrapup()
'To stop screen flicker
Application.ScreenUpdating = False
Range("CDandC").ClearContents
Range("qdata5,qdata6").Font.ColorIndex = 2
'To delete delivery address lines if 1st line empty
If IsEmpty(Range("deliver_line1")) _
Then Sheets(1).Range("deliver_rows").EntireRow.Delete
'No End If required as only one action as a result of the If
Range("Item_Nos").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
Columns("A:E") = Columns("A:E").Value .........................
A spreadsheet based on my template has been sent to me because the macro won't run properly. When I try to run the macro I get a Runtime Error '1004' Method 'Range' of object '_Global' failed on the following line. Columns("A:E") = Columns("A:E").Value.
View 4 Replies
View Related
Jan 16, 2014
Is it possible to hide formulas from the formula bar while still having the formulas active?
View 8 Replies
View Related
Mar 23, 2012
I have a master data sheet with four columns, A, B, C and D
Column A has the primary data and B,C,D has dependent data values;
So when I insert a new cell in Column A with cells Shift Down, I want mandatorily new cells to be inserted in the same row in col B, C and D as well so that data integrity is maintained;
View 2 Replies
View Related
May 7, 2009
I can use the MATCH function when i am in excel but i am having trouble getting it to work when i am trying to insert the formula using VBA.
Here is the code i have but it wont even compile........
View 9 Replies
View Related
Aug 24, 2009
I have a spreadhseet with various functions on it and what I am trying to do is this.
Cell E4 returns a >35 or <35 true or false value
Cell G4 is either blank or has "Yes" text type into it.
What I am trying to do is get cell F4 to return certain arguments.
E4 = >35 and G4 is blank I want it to state "Email Hiring Manager"
E4 = ,35 and G4 is blank I want it to state "Wait"
I have a basic IF formula that returns this
=IF(E4>35,"Email Hiring Manager","Wait")
Then if cell G4 is populated with a Yes the formula needs to overwirte the origonal if with the return arguments of
=IF(G4="Yes","Email Agency","Email Hiring Manager")
If yes then what would be Email Hiring Manager (yes will only be input if E4 is greater than 35) will be overwritten with "Email Agency"
Can this be done with two If formulas or does there need to be 3 or more to count if other IF formulas are actually returning a value?
View 5 Replies
View Related
Dec 12, 2007
If you have a cell with the value ="2*c2+3" NB: (Notice the ""), then to make excel convert the formula in another cell to =2*c2+3 (notice the removal of ""), so that it can calculate the value of the cell instead of showing a textstring?
View 11 Replies
View Related
Dec 11, 2008
I have formulas in a column and they are working unless I edit them to include another function, more cells, whatever, then they display as formulas instead of the result. I've gone to Tools --> Options --> View and the Formulas box is not checked. As well automatic calculation is on not manual.
View 4 Replies
View Related
Mar 6, 2014
I need to have variable formulas created without the $ so I can copy and paste the cells.
How to do this with vba determined range.
View 5 Replies
View Related
Oct 16, 2008
I have a sheet of data which is refreshed eash day, the data has frequencies and values in it. I need the code to say:
if column E:E = Monthly, and column M:M = Annually then divide the value in column N:N by 12
If column E:E = Monthly, and column M:M = Quarterly then divide value in column N:N by 4
We have these four freqencies:
Monthly
Quarterly
Half Yearly
Annually
and the above code will need apply to all scenarios i.e. if E:E = Quarterly and M:M = Monthly then x N:N by 3.
E:E being the origonal frequency and M:M being the new one, we need to know the value of the new gift at the old frequency.
View 14 Replies
View Related
Jan 29, 2013
I have a Row of numbers ( 1 or blank) generated by the formula =IF(AD6>30,"1"," ")
I want to add this row to record how many 1's there are (This is a weather record showing how many Gale days there have been)
Using the usual Sum formula does not add the 1's up.
View 2 Replies
View Related
Jul 23, 2008
I've got a generic question here about adding a row with formulas above the subtotal line.
In the table below I have some simple rows of sums and a subtotal row at the bottom.
If a macro is run how can I insert a new row with the same two formulas in the row one above the Subtotal row....
View 9 Replies
View Related
Oct 26, 2009
I need help figuring out an IF formula that would allow me to calculate the tax owed. The tax rates are 20%, 25% and 30% and the full bracket total for 20% is 4,000$ and for 25%, 11,500$.
In D14, I have as a taxable income, 20,000$ and In E14, I would need a IF formula that calculates that... but I would need to copy only one formula down the E column to be used on varying taxable incomes...
View 9 Replies
View Related
