I have a macro that searches a column for a date and then selects the appropriate date. The next step is to then copy the row and insert a new one below the copied one and paste only the formulas and none of the data. I have tried several iterations but all of the seem to paste the data too.
View 6 Replies
I was searching through this site and found this macro ...
View 9 Replies View RelatedI am creating a time sheet for a supplier & when the supplier enters a date into column A I would like a new line to be inserted below & include the formatting, formulas & data validation from the row above.
View 7 Replies View RelatedI have a simple command button in my worksheet that will insert a blank row and copy formatting, but not the formulas. How do I adjust the code so that the formulas are copied to the new blank row? This is currently what I have:
Private Sub CommandButton2_Click()
Sheets("WAWF Track").Range("A9").Select
ActiveCell.EntireRow.Insert Shift:=x1Down
End Sub
I have a macro that was working fine until I added a new column to my active sheet. Now it fails with a run time error 1004, insert method of class failed. The code is as follows:
Private Sub UpdatePart_Click()
Dim S As String
Dim r As Excel. Range
Range("A2").Activate
S = InputBox("Enter the part no. you wish to update")
On Error Resume Next
If S = "" Then 'Exit Sub
'If StrPtr(S) = 0 Then
MsgBox "Update Cancelled"
Else
Set r = Columns(1). Find(What:=S, After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False)...............
The following macro does what it is designed to do and needs to be run from a control sheet called "Guide". When I run it from this Guide sheet it stops at around row 53 (out of 1400 rows) on each of the specified sheets in the macro. I have struggled with this problem and have now discovered that the macro will run correctly when run from one of the worksheets specified in the array, e.g. sheet "200 and 100".
Sub Calculateclosingtrades1()
Dim r As Long, c As Integer, LastRow As Long, rcheck As Long
LastRow = Range("J65536").End(xlUp).Row
Dim shtTemp As Worksheet
Dim vntName As Variant
For Each vntName In Array("200 and 100", "100 and 50", "50 and 25", "40 and 20", "20 and 10", "15 and 10", "18 and 9", "200 only", "100 only", "50 only", "40 only", "25 only", "20 only", "15 only").............
I have a 2 groups of column headings with a different month and year in each heading so
1st Group of columns range
Columns AJ through AX
Column Heading example "Expense Ratio February 2013......next Column over is "Expense Ratio March 2013"
2nd Group of columns range AY though CE
Column Heading example "Capital Balance February 2013......next Column over is "Capital Balance March 2013"
Each new month I need to add a new Expense Ratio column after the most recent expense ratio Column. (i.e. Find "Expense Ratio March 2013" and I need to add a column after that with heading "Expense Ratio April 2013"
Same thing for Capital Balance - add a new Capital Balance column after the most recent Capital Balance Column. (i.e. Find "Capital Balance March 2013" and I need to add a column after that for "Expense Ratio April 2013"
Because the ranges keep changing month over month, how do i do this.
I have a list of data by daily date only for days when the market is open. I need to select the data for each Friday (if the market was not open that Friday then I need to take the Thursday’s data) and copy that data into new cells thereby creating a set of weekly data. The daily data is in columns A to F and in rows 2 to 1400. The Friday data of each week is to be copied to columns G to L and to rows 2 to 300. I need to have the data without row gaps as I use this data subsequently.
I have attached a sheet with some daily data. I have manually copied a sample of Friday data to the desired location in red to show the solution I am looking for. An additional problem is that I need to copy across a daily moving average, from column F to column L, and being a calculation from daily data it does not copy and paste.
I want to save myself some time at work, that's why I want to create an automatic sheet in Excel using VBA. I need to create files with monthly reports of data.
My project looks like this:
1. Gather information from user (Month & Year)
2. Create a file which name is based on Month & Year
3. Select data sheet
4. Find date range to copy (RowBegin, RowEnd)
5. Copy nad Paste required data into new file (point 2.)
6. Delete rows, formated in certain way
7. Find bottom of all columns and insert row with all formulas
8. Format all sheet acording to requirements
I was looking over MrExcel.com and I know how to do all the points besides point -> 4. Find date range to copy (RowBegin, RowEnd)
I got a column "D" with about 5000 cells for now and the sheet is updated daily. In those cells I got dates formatted like this:
D
4012 14/02/2006
4013 21/02/2006
4014 15/03/2006
4015 15/03/2006
4016 17/03/2006
4017 07/04/2006
4018 07/04/2006
4019 20/04/2006
What I don’t know is how get in VBA two variables – range of row numbers describing selected month (for example March) - from (RowBegin) & to (RowEnd), in this case RowBegin=4014 and RowEnd=4016, which I can later put into:
RowSub = RowEnd - RowBegin
Range("A”&RowBegin&”:A”&RowEnd).Copy Sheets("March").Range("A1:A”&RowSub)
I work for a chicken hatchery. So, a couple preliminary things by way of explanation:
1. The day we place our eggs in the incubators, we fill in an excel file containing a list of all the farms from which those eggs came. This is called the "Egg List" workbook.
2. After 21 days have passed, and the eggs have turned into chicks, we open that original file. We copy cells from one column of that file (the workbook is called the “Egg List”, we copy “Sheet1” cells B7:B50), and paste them into another Workbook called “Chick List.”
My question is this:
Is there a macro I can put into the “Chick List” workbook that will automatically locate that particular “Egg list” workbook file that is 21 days old, and paste the contents of its cells B7:B50 into cells A7:A50 in my “Chick List” Workbook. It is preferable if this can be done without opening the old “Egg list” file. But if this is not possible, I’ll take whatever I can get.
Here is what I have, which works okay as far as finding the file. I bootlegged this from another part of this helpful website. But I cannot figure out the syntax for getting cells B7:B50 from the Egg list to copy into cells A7:A50 of the Chick List.
Dim FSO As Object
Sub ProcessFiles()
Dim i As Long
Dim sFolder As String
Dim fldr As Object
Dim Folder As Object
Dim file As Object
Dim Files As Object
Dim this As Workbook
Dim cnt As Long
Dim filenew As Object
I've got a large excel spreadsheet that is used for cost calculations and I need to be able to replace the formulas in three specific columns with the value of 0.01. I also need to be able to change the values back to their original formula. My problem is getting the formula back into the cell. The formula begins with "=IF(And" which seems to be where I'm getting most of my errors. So right now I run the code and the value of the cells in the three columns change to 0.01 and when I run it again I'm getting errors. Here is the formula. How should I be entering this in VBA to get this line into my cells? The row numbers will be changing as I go down, but the rest of the formula does not. =IF(AND(E48<>"",AH48<>0),(AH48/E48)*100,0)
View 3 Replies View RelatedI've attached a workbook which contains two sheets:
PAYM
DEVICE_PAYM
Data is updated on DEVICE_PAYM each day with the figures I need located in column "AN". I need to be able to copy the data from "AN" and paste it into a column on the PAYM sheet. The destination column on the PAYM sheet needs to be specified by inputting a specific date - ideally, I would like to use the calendar Add-In as part of this process. I've already input some code for the calendar but am unable to develop this further so that it finds the correct date column and pastes the data across from the other sheet.
There 2 columns, 1 in which you input data and the other which has a formula which uses the data to do a calculation. There are about 30 rows already filled in.
When I go to insert a new row of data, the formula just appear after I type in the input column. If I click on the cell where the formula appeared before I typed in the data, there was no formula there. It is almost like an autofill, excel knows that I am going to copy down the formula. (It also copies down the formatting)
I have a workbook with a worksheet called Summary that has formulas that refer to other worksheets (say A, B, and C) in the same workbook.
What I want to do (with VBA because I have to do this many times) is copy this Summary worksheet into several other workbooks, all of which also have their corresponding worksheets A, B, and C.
I do *not* want the copied Summary worksheet's formulas to refer to the old workbook. If I copy the worksheet by hand, this is what happens.
Instead I want the copied worksheet's formulas to reference the worksheets of the workbook they are now in.
delete rows of a report which contains $- or zero value but not row with Beginning Balance. Data begins from Column B to Column E. Some records may need to be deleted completely from Account Number down to Subtotal rows plus one empty row, if the Subtotal amount is $- or zero. Below is the sample data and how the finished sheet should look like. The report will comes in thousand of line. I don't have knowledge in programing but believe it can be done through VBA.
Account Number
211-00-5936-00-001-3-00-2-00
Trans. Date
Doc. No.
Trans. Line Comment
Actual Amount
[code]....
if Subtotal is $0, then delete the row starting from Account Number to Subtotal plus one empty row
211-00-5936-00-002-3-00-2-00
Trans. Date
Doc. No.
Trans. Line Comment
Actual Amount
[code]....
Macros that will insert formulas into cells, and I've been able to modify the macros to insert additional (simpler) formulas well enough on my own. But I can't seem to find the pattern of where to put the quotation marks! Here's the macro code that will enter my formula, including the formula (and the portion of code that the debugger highlights):
r.Offset(, 1).FormulaR1C1 = _
"=VLOOKUP(rc[-1]"",""'Blend List'""!""A2"":""E250"",5,FALSE)"
And here's the code in it's entirety:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim r As Range
If Intersect(Target, Columns("d")) Is Nothing Then Exit Sub
Application.EnableEvents = False
ActiveSheet.Unprotect
For Each r In Intersect(Target, Columns("d"))
If r.Row 1 Then
If Not IsEmpty(r.Value) Then...........
Writing a macro to insert two columns with IF formulas into a Worksheet. The 2 columns to be added would be after Column G on Sheet 1.
The new Column H would be
"=IF(G1>=Q#,G#/Q#,0)"
And the new Column I would be
"=IF(G#>=Q#,MOD(G#,Q#),G#)",
Where # represents the row number.
I need to paste the format and formulas of the last row of data into a new row beneath it. I've seen a bunch of different end row functions, but which one is best and how do I only paste the formulas and formatting?
View 8 Replies View RelatedWhat I need is to insert a row at row 59 and autofill the formulas including drop down list from the above row. This is what I have so far (Thanks to Reafidy and shg).
Sub ChkDates()
Dim c As Range
Dim DelRng As Range
Dim ArcRng As Range
Dim i As Long
Dim l As Integer
Application. ScreenUpdating = False
Worksheets("Report").Activate
For i = 60 To 8 Step -1
Set c = Cells(i, 33)
If IsDate(c) Then ..............
I am brand new and I don't know a ton about macros and programming in Excel.
What I'm trying to do here in this attached spreadsheet is at the end of inputting my line, I want to hit the tab (marked in red to make it clear where) button in the cell and have it automatically create another blank line but keep the formulas the same.
Basically I just want to avoid having to right click and insert line and then drag the formulas column by column down which is difficult.
See attached : TEST2_2014 Sales & Commission Spreadsheet.xlsx‎
I'm running a macro that opens another workbook and read data from it.How can I incorporate this code into my macro.Sorry i don't knwo VBA.
Workbooks.Open Filename:="C:Documents and SettingsmsimantbDesktopINFRACHEM_POLYMERS - DON''T DELETE.xls]Sheet1"
UserGRP_MAcro Macro
Rows("1:3").Select
Selection.Delete Shift:=xlUp
Columns("A:B").Select
Selection.Delete Shift:=xlToLeft
Columns("B:E").Select
Selection.Delete Shift:=xlToLeft
Columns("A:A").EntireColumn.AutoFit
Rows("2:2").Select
Selection.Delete Shift:=xlUp
Range("B1").Select
ActiveCell.FormulaR1C1 = "Existing userGroup"............................
I tried searching for code for each part of the task separately and trying to piece together multiple macros, that did something similar, but I’m not have a lot of luck, so I’ll break it down into two treads, I hope this will follow the rule of one question per post, but if I should have separated this request even farther as two treads, please let me know and I’ll be happy to comply.
I was given a spread sheet with a macro that loads data from a SQL Data base (not mine), it returns anywhere from one row to 100’s of rows data. Since it’s not my spread sheet and macro, I copied this sheet to my destination workbook. The Data loads in 7 columns starting in B4:H4, with the column headings titles: Acct#, Id#, Name, Qtr1 Totals, Qtr2 Totals, Qtr3 Totals, and Qtr4 Totals. Data cells in spreadsheet not formatted (general)
What I’m trying to do:
part 1:
I need a macro to copy the data only for columns Id# thru Qtr4 Totals (C5:H5 down thru the last row with data) to another sheet. The destination sheet range starts with rows B13:G13, with formulas below and to the right in columns H13, and J13:N13
(column I is blank).
The formulas below the range are a subtotal of the copied columns (D:G). They could be remove and totaled after they’re copied, so there's nothing below the copied range? Since I need the column totals as a subtotals, my thought was to have the row heading and formulas already on the destinations sheet and just insert a blank rows between as each row was copied?
part 2:
As each row of data is copied from the source sheet, I need the macro to copy the formulas to the right of the copied range (H13, and J13:N13) on the destination sheet down for each new row of data copied from the source sheet
I have a user form that when a command button is clicked it enters the data from the from into coloums a,b,c,etc. I have code to do this but I want to add code to add a static date in coloum B based on if coloum A had data entered from the form. I need the date not to change to current date when the file is reopened. I am trying to elimate a date text box in the form. I have a link to the file http://www.box.net/shared/zdtsjv0qos
View 7 Replies View RelatedWhen all is said and done, and you've finished an enormous amount of work in a workbook, is there an automated way, or something in the options to find out just how many formulas you used in it (aside from counting each cell with your cursor, lol)?
I have a sheet(Sample.xlsx) in which weekly data is collected and this is done by using the VBA code(Present in Copy 1 and Copy 2 button in Master US.xlsm) written by me. But in my code, it inserts a new after asking two parameters, i.e. line range(i.e. row no for eg A64) and date. I want it to automatically search row containing last date and inserts row below it and this needs to be implemented in "Insert Automatically" and "Insert Date" button using VBA code in Master US.xlsm sheet.I dont have problem with second paramenter.
Logic i want to use :
Itergation of whole page
{
If (col A<>Date)&& col A=Average(i.e. contains average word)
then
inserts row above that row
And then ask for date to enter using date variable.
then inserts row above that row containing last week data in col A.
}
"Insert Automatically" in Master US.xlsm sheet is the button which takes system date and implements the above logic.
"Insert Date" in Master US.xlsm sheet is the button which ask for only date and implements the above logic.
Sheets attached.
Master US.xlsm
Sample.xlsx
I have various formulas (such as: =(D3-$E$3)/$E$3 )
which continues for each row (IE next row 3 is replaced with 4 etc)
I have made som errors when I made the formulas and therefore I have the following questions:
1. Is it possible to find and replace all E's with another letter (F in my case). I haven't been able to resolve this, when it has to be done inside formulas?
The optimal would be if I could set 'Display formulas' under tools, and find and replace in the formulas displayed.
2. Is there a smart way of swapping D3 with E3 for all formulas? (So the result will be: =($E$3-D3)/$E$3 and etc for all formulas)
This is so hard to explain so see my example and my attachment. example: If "314A" is in column A and "4031" is in column B then return the value in column G.
View 3 Replies View Relatedif I could find a good book on formulas, I might be able to raise the bar on my questions.
View 3 Replies View RelatedI've got a workbook that includes a Check Register worksheet. Column K of the Check Register worksheet has formulas that maintain a running current balance. So Column K has numbers (calculated) from K12 down to the last transaction (K461 is this instance). Cells K462 to K2000 contain formulas awaiting to be calculated.
I've written a procedure to "Create New Year" and in the process, I want to capture the value of the last calculated value in Column K from the old year. I cobbled code from different websites and have come up with this code
On Sheet 2 I am looking for a formula to find Dog1 in a cell on a different sheet and then to equal a cell 2 columns to the right of where ever it found Dog1. I cannot make it so that it simply equals a certain cell all of the time. It has to be able to move in sheet 1. For example sometimes Dog1 will be on row 5 and sometimes it will be on row 7. So the equation I am looking for needs to be able to work no matter what row it is on. I have tried a couple VLOOKUP equations but they are not working because like I said, Dog1 is not the only text in that cell.
View 3 Replies View Related
