Macros that will insert formulas into cells, and I've been able to modify the macros to insert additional (simpler) formulas well enough on my own. But I can't seem to find the pattern of where to put the quotation marks! Here's the macro code that will enter my formula, including the formula (and the portion of code that the debugger highlights):
r.Offset(, 1).FormulaR1C1 = _
"=VLOOKUP(rc[-1]"",""'Blend List'""!""A2"":""E250"",5,FALSE)"
And here's the code in it's entirety:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim r As Range
If Intersect(Target, Columns("d")) Is Nothing Then Exit Sub
Application.EnableEvents = False
ActiveSheet.Unprotect
For Each r In Intersect(Target, Columns("d"))
If r.Row 1 Then
If Not IsEmpty(r.Value) Then...........
I need to paste the format and formulas of the last row of data into a new row beneath it. I've seen a bunch of different end row functions, but which one is best and how do I only paste the formulas and formatting?
I am creating a time sheet for a supplier & when the supplier enters a date into column A I would like a new line to be inserted below & include the formatting, formulas & data validation from the row above.
Macro to clear cells with numbers but no cells with formulas with in this macro:
Dim i As Long i = Range("E3") If i > 0 Then ' Copy range Range(Cells(6, 10 + i), Cells(500, 17)).Copy Range(Cells(6, 10), Cells(500, 17)).Select ' Paste special ActiveSheet.PasteSpecial Format:=2, Link:=1, _ DisplayAsIcon:=False, IconFileName:=False ' Clear i columns on the right Range(Cells(6, 18 - i), Cells(500, 17)).ClearContents End If End Sub
The range is where the cells with numbers need to be cleared but not the ones with formulas.
is there a way to do this in VBA? I've also read: - Dave Hawley's recommendation of using: Sheet1.UsedRange.SpecialCells(xlCellTypeConstants).ClearContents
from another thread (which is excellent!)
- SHG's recommendation of using a named range, for example:
Range("Inputs").ClearContents
Given my limited knowledge of VBA, how would I now combine the two to write a VBA sub-routine that clears a named range entitled "Entry" on a sheet entitled "Data"? Would the following be the correct syntax: Worksheets("Data").Range("Entry").SpecialCells(xlCellTypeConstants).ClearContents
I am trying to have the formula =( SUMIF(S2:S125,">0",S2:S125))/(COUNTIF(S2:S125,">0")) Put into cells through vba. What I did to get the formula is typed it into an excel cell to find the average of a group of cells that do contain blank cells. The formula brought out the proper results. So all I did is put the formula into vba and changed the appropriate parts. The range will not be the same of course, but there is what I have.
When I show a msgbox for ActiveCell.Formula (Msgbox activecell.formula), it shows me the formula as above - =(SUMIF(S2:S125,">0",S2:S125))/(COUNTIF(S2:S125,">0")) Except instead of the s:ranges, it shows $L2:$L125 (which is correct). The quotes do show up around the criteria in both the sumif and countif. I keep receiving an error. I put a msgbox err.description & ", " err.number dialog in. The error comes up as ", 0" (no quotes).
I have a worksheet with several thousand rows. During a month new entries are added at the bottom of the previous entries. One of the columns for each entry is a stock symbol and I've written a macro to enable going quickly to any specific stock symbol's location by searching for the symbol.
Once a month I select rows for some of the new entries for a given symbol, cut the relevant rows, activate the macro to find the location of other entries of the same symbol, and then "Insert Cut Cells" so as to move the new rows to the same area as other similar older entries.
What I was finding was that activating the macro was causing a recalculation of the workbook, which delays the macro from finding the symbol in question. This was getting bothersome, so I avoided the delay by adding an Application.Calculation = xlCalculationManual to the beginning of the macro, and at the end of the macro I reset the Calculation back to Automatic.
This eliminates the delay, in finding the old symbol, but it also clears out whatever memory location was storing the cut cells, so that I don't have the "Insert Cut Cells" option available once I get to the found location.
So, currently I have either: A) a quick find of the symbol, but I can't use the "Insert Cut Cells" feature, or B) I have a delay in the finding, but am able to Insert.
how I can have the quick find of the macro but still retain the ability to Insert the cut cells ?
I want to be able to insert-shift cells down based on criteria in another cell. For instance, I would like a macro that would look at column B for saturday and sunday and then insert-shift cells down on the corresponding cells in column D...
I am trying to come up with a code that will copy column A entirely, and insert the copied cells into the first blank column. In the columns with information in them, there will always be text in the first cell, so that can be used as the test to find the first blank column, but I'm not sure how to get this done for my macro.
I don't know if a macro is necessary, but the built in Insert -> Insert copied cells -> Shift cells down function can't accomplish what I require.
I've pasted in two example tables for what I'd like to do. For the first table, the data in column C is a name and the cells from columns D-Z, rows 7-10 is what I want to copy and paste from row 12, column D; row 13, column D; etc, etc. However, I want the full rows below the name in column C to move down when I paste from column D. Using the Insert function on the Insert blade only gives me the data in columns D-Z moving down.
The second pasted table gives an example of how I want it to look.
Example: Column A has a mixture of letters and numbers. ie AU1234 or AU5678 Always the letters will be first, but not sure if 2 or 3 letters. Need to insert space between letters and numbers.
I have so far. " =(left(a2,2)) & " " & (mid(a2,3,(len(a2)-2))) " this works if all are only 2 letters...
Now. What I need to do is open a .csv (will do manually) then hit something like ctrl-alt-k to run macro.
Step 1: Insert a column next to A, check rows down and for however many rows, make above formula (include 2 or 3 letters) to insert space between letters and numbers, select the new column, copy, select column a and overwrite with the values from the new column. ie turn 'A2' from "AU1234" to "AU 1234" and 'A3' from "AU4567" to "AU 4567" .
Step 2: Column D has comma delimited fields. Column F also has comma delimited fields. both D and F will always have the same number of fields. D will be something like 1234,2345,3456 ------ in this case 3 fields but could be over 100 fields F will be something like M0002456 (04P), M0002457 (05P), M1230477 (02A).
Need to split both D and G from row A2 simultaneously from comma fields to rows. copying all other data from row. and insert before the next set of data in what was previously A3 and (in this case *should* be moved down to A5 because of the 2 inserted lines from the 2 extra fields).
E.g.: Column A Row 2 "AU 1234" Column B Row 2 "data1" Column C Row 2 "data2" Column D Row2 "1234" Column E Row 2 "data3" Column F Row 2 "M0002456 (04P)" Column A Row 3 "AU 1234" Column B Row 3 "data1" Column C Row 3 "data2" Column D Row 3 "2345" Column E Row 3 "data3" Column F Row 3 "M0002457 (05P)" Column A Row 4 "AU 1234" Column B Row 4 "data1" Column C Row 4 "data2" Column D Row 4 "3456" Column E Row 4 "data3" Column F Row 4 "M1230477 (02A)"
Then carry on to next row which may have only one field and can be ignored/skipped to the next which may have 100 fields which will need to be split to rows and inserted...etc....
Step 3 Remove all the "space Bracket-data-Bracket" ie " (04P) from column F
I'm trying to create a macro to insert a formula into a specific cell. The formula is meant to check if a cell has text, and then if it does, search for the text on another page.
I had a go at the code, but keep getting Runtime error 13.
I'm using Excel 2010
Code:
Sub new_entry() ' ' NEW_ENTRY Macro Dim rowNo As Integer
I had posted earlier to see if there was a way to protect certain cells from being updated when using a linked excel spreadsheet to access. Since there have been no replies I'm assuming not.
Different approach, can I create a Macro that would run after the update that would insert my required text into each cell from A2 through to R2.
The text would always be the same and always in exactly the same cells. This would need to be an insert into and not a replacement of the data already in those cells.
A1 B1 C1 D1 State BUName InsuranceCompanyName Claim ROnumber Renter Last Name
The text under each of the A2, B2, C2 etc is what I would want the macro to do for me, essentially putting back what the update from the linked source removed.
I've got a large excel spreadsheet that is used for cost calculations and I need to be able to replace the formulas in three specific columns with the value of 0.01. I also need to be able to change the values back to their original formula. My problem is getting the formula back into the cell. The formula begins with "=IF(And" which seems to be where I'm getting most of my errors. So right now I run the code and the value of the cells in the three columns change to 0.01 and when I run it again I'm getting errors. Here is the formula. How should I be entering this in VBA to get this line into my cells? The row numbers will be changing as I go down, but the rest of the formula does not. =IF(AND(E48<>"",AH48<>0),(AH48/E48)*100,0)
Spreadsheet 1 has 10 columns of data (A-J). I want to copy a variable number of rows from spreadsheet 1 to spreadsheet 2.
When I paste into spreadsheet 2, I'd like to automatically insert blank cells in three places, taking the total number of columns to 13. I'd like columns C, F and I to be blank, and the last column with data to be M.
I will perform this task regularly, and add the copied cells to the bottom of spreadsheet 2, so I'd only like to insert blank cells within the range that I'm copying, not the entire spreadsheet.
I will then populate the blank cells with a VLOOKUP function. Do I need another macro to automatically add the formula to the cells, or is there a way to include this in the cell-inserting macro?
I am new to VBA but I am trying to insert text and lock all duplicate cells except for the first one. Below is the macro I am trying to make. I keep getting an error on the line:
There 2 columns, 1 in which you input data and the other which has a formula which uses the data to do a calculation. There are about 30 rows already filled in.
When I go to insert a new row of data, the formula just appear after I type in the input column. If I click on the cell where the formula appeared before I typed in the data, there was no formula there. It is almost like an autofill, excel knows that I am going to copy down the formula. (It also copies down the formatting)
I have a workbook with a worksheet called Summary that has formulas that refer to other worksheets (say A, B, and C) in the same workbook.
What I want to do (with VBA because I have to do this many times) is copy this Summary worksheet into several other workbooks, all of which also have their corresponding worksheets A, B, and C.
I do *not* want the copied Summary worksheet's formulas to refer to the old workbook. If I copy the worksheet by hand, this is what happens.
Instead I want the copied worksheet's formulas to reference the worksheets of the workbook they are now in.
I am trying to write a macro that will insert a formula directly into the cells in column M of my worksheet.
The worksheet has about 3400 rows. When I run the macro it does not adjust the cell reference in the formula so I am getting the same value in all 3400 rows.
I am running Excel 2007 on Windows Vista Business 32 bit. Recently I have noticed that if I enter a formula into an empty, unsused cell, it is recognized as a formula. If I modify that formula, it is then recognized as text and does not work as a formula. The only way I can get the cell to recognize a formula is to delete the cell and start over. This same scenario does not occur on previously stored workbooks. I have checked all of the flags that I know about, including the Options function.
delete rows of a report which contains $- or zero value but not row with Beginning Balance. Data begins from Column B to Column E. Some records may need to be deleted completely from Account Number down to Subtotal rows plus one empty row, if the Subtotal amount is $- or zero. Below is the sample data and how the finished sheet should look like. The report will comes in thousand of line. I don't have knowledge in programing but believe it can be done through VBA.
Account Number
211-00-5936-00-001-3-00-2-00 Trans. Date Doc. No. Trans. Line Comment Actual Amount
[code]....
if Subtotal is $0, then delete the row starting from Account Number to Subtotal plus one empty row
211-00-5936-00-002-3-00-2-00 Trans. Date Doc. No. Trans. Line Comment Actual Amount
I have a macro that searches a column for a date and then selects the appropriate date. The next step is to then copy the row and insert a new one below the copied one and paste only the formulas and none of the data. I have tried several iterations but all of the seem to paste the data too.
I have a simple command button in my worksheet that will insert a blank row and copy formatting, but not the formulas. How do I adjust the code so that the formulas are copied to the new blank row? This is currently what I have:
Private Sub CommandButton2_Click() Sheets("WAWF Track").Range("A9").Select ActiveCell.EntireRow.Insert Shift:=x1Down End Sub
What I need is to insert a row at row 59 and autofill the formulas including drop down list from the above row. This is what I have so far (Thanks to Reafidy and shg).
Sub ChkDates() Dim c As Range Dim DelRng As Range Dim ArcRng As Range Dim i As Long Dim l As Integer Application. ScreenUpdating = False Worksheets("Report").Activate For i = 60 To 8 Step -1 Set c = Cells(i, 33) If IsDate(c) Then ..............
I am brand new and I don't know a ton about macros and programming in Excel.
What I'm trying to do here in this attached spreadsheet is at the end of inputting my line, I want to hit the tab (marked in red to make it clear where) button in the cell and have it automatically create another blank line but keep the formulas the same.
Basically I just want to avoid having to right click and insert line and then drag the formulas column by column down which is difficult.
See attached : TEST2_2014 Sales & Commission Spreadsheet.xlsx
