Insert Row At Specific Location And Auto Fill Formulas From Above
What I need is to insert a row at row 59 and autofill the formulas including drop down list from the above row. This is what I have so far (Thanks to Reafidy and shg).
Sub ChkDates()
Dim c As Range
Dim DelRng As Range
Dim ArcRng As Range
Dim i As Long
Dim l As Integer
Application. ScreenUpdating = False
Worksheets("Report").Activate
For i = 60 To 8 Step -1
Set c = Cells(i, 33)
If IsDate(c) Then ..............
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
VBA Macro To Delete Rows/Columns, Insert Formulas & Auto Fill
I'm running a macro that opens another workbook and read data from it.How can I incorporate this code into my macro.Sorry i don't knwo VBA. Workbooks.Open Filename:="C:Documents and SettingsmsimantbDesktopINFRACHEM_POLYMERS - DON''T DELETE.xls]Sheet1" UserGRP_MAcro Macro Rows("1:3").Select Selection.Delete Shift:=xlUp Columns("A:B").Select Selection.Delete Shift:=xlToLeft Columns("B:E").Select Selection.Delete Shift:=xlToLeft Columns("A:A").EntireColumn.AutoFit Rows("2:2").Select Selection.Delete Shift:=xlUp Range("B1").Select ActiveCell.FormulaR1C1 = "Existing userGroup"............................
View Replies!
View Related
Add Multiple Formulas In Row & Auto Fill Down
I am trying to do can’t really be recorded, at least i don’t think it can. I have a report that I run off and after I loaded it in Excel I then have to add in five columns at the end of the sheet. These are always in the same columns: R,S,T,U,V. These are the formulas I have to then input R =IF(G2="no invoices",A2,"") S=IF(I2="Match",A2,"") T=IF(I2="Sent to AP",A2,"") U=IF(I2="Force Settled",A2,"") V=IF( COUNTIF($R$2:$U$10054,A2),A2,0) Note for column V, the range R2:U10054 would depend on how many rows is in the report, its just in this example the report does have 10054 rows. The columns would always stay the same. I would then copy the formulae down for the number of rows that is in the report and filter column V by entries that equal zero to give me the rows I am looking to analyse. Is this the type of thing that can be written as a macro so that everytime I have a new report open in Excel I can just run the macro and it will do all of this for me?
View Replies!
View Related
Auto Fill Formulas
ColA-ColB A1 - B1 A2 - B2 Let's say B1 has a formula- =A1 b2 has formula = =A2 I want to copy all the formula in ColB As it goes down in Column B, it should be =A2 at 2nd row, =A3 at 3rd row, =A4 at 4th row. Reason being I want this formula to activate when the cell in Column A is filled. If the cell in Col A is empty, The formula in Col B should be blank! Example: ColA-ColB 13/01- Jan 13/12- Dec 29/06- June 30/07- July
View Replies!
View Related
Insert Row At Variable Location
I had a quick question for something that should be simple but I can't figure it out. I have a column of sorted values, it goes A A A A A B B B B B and I want to insert a row to separate the A's from the B's. But there will be a random number of A's. I can figure out how to count where the A's end. But I can't figure out how to insert a row. Any suggestions? I tried the two below but they don't seem to work. The for section is counting the A's, and it works, it's what comes next that's giving me a headache!
View Replies!
View Related
Auto Fill Specific Cells From Userform
I am trying to create a spreadsheet to record vehicle mileage at the end of each week, however sometimes we cannot input the information until 2 or 3 weeks later. I am looking for a way to auto fill specific cells when the user inputs the information using a userform. On the attached spreadsheet: The first button input an 'Empty Row' ready for the new week and current mileage. The second button opens the userform to select the vehicle, date and input the mileage. I cannot figure out how to have the mileage inserted into the correct cell irrespective of when we insert the information.
View Replies!
View Related
Automatically Fill Formulas In Newly Inserted Row From Row Above
What I would like to do is on a sheet when I insert a new row that it will "FILL" the formulas that are the row above it. For example I have cells A1-F1. On cell A1 there is 1, B1 there is 2...etc. When I then insert a new row I would like the row below A1-F1 to read. A2 = 2, B2=3 so it had a linear growth. I want to do this with my formulas so whenever someone adds a new line it knows to copy the formula as well but only in certain cells if possible.
View Replies!
View Related
Auto Insert A Row With Info Populated From The Row Above
to be able to do is have a stock control sheet that tells me how much of 1 item we have in stock which is easy, the hard part comes when this stock is sold as this stock can be sold to a number of different customers e.g. We have 10,000 X Pens Customer 1 buys 1,000 Customer 2 buys 6,000 Customer 3 buys 3,000 i need a way of saying that we have 10,000 pens but if we sold 1,000 then we can click a button (macro maybe) and that will automatically see that we have 10,000 for that line and we have only sold 1,000 so we need a line inserting saying that we have 9,000 remaing and so on.... The sheet needs to record who these goes to though, that the reason i was thinking of adding a row If this doesnt make sense then i am happy to answer your questions? i can upload an example excel sheet if required if someone can explain how i do this?
View Replies!
View Related
Formulas Appear By Themselves? (insert A New Row Of Data)
There 2 columns, 1 in which you input data and the other which has a formula which uses the data to do a calculation. There are about 30 rows already filled in. When I go to insert a new row of data, the formula just appear after I type in the input column. If I click on the cell where the formula appeared before I typed in the data, there was no formula there. It is almost like an autofill, excel knows that I am going to copy down the formula. (It also copies down the formatting)
View Replies!
View Related
Automatically Fill In To Specific Row ?
to illustrate I attached a spreadsheet.The spreadsheet contains 5 colunms. 1. Names 2-4. Numbers 5. Sum of numbers (the formula for the sum is only entered in the first row) What I want to do is automatically fill in sums from the second to the last row. I was trying it with the "record macro" function but failed because I don't know how to jump to the last row. CRTL-Shift-down is not useful in this case.
View Replies!
View Related
Retain Auto Number Sequence After Row Insert
I'm using a simple auto numbering command. eg: cell A1: 1 cell A2: =(A1+1) then shift, copy/paste cell A2 until A600, This creates a sequential number column from 1-600. My problem lies when a new row is inserted, which is left blank. How can i maintain this auto function upon a new Row insertion?
View Replies!
View Related
Find Date & Copy Row Insert Formulas Only
I have a macro that searches a column for a date and then selects the appropriate date. The next step is to then copy the row and insert a new one below the copied one and paste only the formulas and none of the data. I have tried several iterations but all of the seem to paste the data too.
View Replies!
View Related
How To Insert Blank Row Below A Cell Containing Specific Text
I was wondering if someone might be able to assist me with using VB to insert a new row below a cell containing specific text. For example: - All of my data is in column A -I want to scan all of column A, and if there is a cell that contains "ACHCAMERIGROUP M", then I want a blank row inserted below it. If column A does NOT contain that text....do nothing.
View Replies!
View Related
Formulas In A Central Location
Is it possible to have the formula written in one remote cell, so that any modification done in this formula is reflected on all places where its refereced to? z26 : Formula A A1 : Formula A A2 : Formula A A5 : Formula A A6 : Formula A A7 : Formula A A9 : Formula A A11 : Formula A in this example i store the formula in z26 and variety of cells in A are using it (not all of them)Suppose if i change anything in z26. I want it reflected in all the cells that are using this formula?
View Replies!
View Related
Transferring Files To A New Location Messes Up Formulas
I have a bunch of spreadsheets in one folder with several subfolders. On one spreadsheet, I have a bunch of formulas referencing another spreadsheet. This is an example of the formula: =C:UsersKatie DestktopMake Your Day Program8th Grade[Math 8,xls]Sheet1'!G2. I am building this program at home, but then when I take the Make Your Day Program folder and put it on the J drive at my school, the formulas still try to reference my desktop instead of changing the formula to J:Make Your Day Program8th Grade etc.. Why? It is a pain to go through all the formulas and change them to reference the j drive because there are a LOT, and I have already done that once. How can I ensure that when I transfer this program to the school drive, after the holidays, that the formulas will change to their new reference location?
View Replies!
View Related
Insert Rows At Specifice Location
I need a macro that will look in column B of a worksheet for the value "Grp2" and begin inserting rows underneath that value based on a variable that I will pass to it. The variable will be how many rows to insert. For example if value "Grp2" occurs in cell B19,beginning at cell B20 I want to insert a specified number of rows. ******** ******************** ************************************************************************>Microsoft Excel - Test2.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutJ19= ABCDEFGHI19XLRTGrp2CODERTSCFLTROASMLTGDOP*20*Begin*insert*rows*here*******21*********22*********23*********24*********25********326XLRTGrp3CODERTSCFLTROASMLTGDOP*27*********Test* [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
View Replies!
View Related
Generate A Folder Within A Specific Location
I am trying to generate a folder within a specific location (For now lets call it C:Jobs) that will be named as per the adjacent cell (Column H on attached) Obviously if the folder already exists I want the code to stop. But this code will have to generate a different folder for each row within the spreadsheet.
View Replies!
View Related
Save To Specific Location As Cell Name
I've been searching for ages trying to work out how to do this but have so far only managed to confuse myself. i have office 2007 and I have found some code to convert an excel sheet to PDF, however I need it to saveas the contents of cell (e6) and save to a location on our network drives (C:TEMP).
View Replies!
View Related
Hyperlink To Specific Location In Word Doc?
I have an Excel file to distribute to users. This file must contain Hyperlinks to a Word file which i will enbed in a sheet of the Excel file itself. My question is this: Is it possible to produce Hyperlinks that go to the specific part of the Word document? So far, i am only able to Hyperlink to the first page of the Word doc, by doing a macro.
View Replies!
View Related
Add Custom Menu At Specific Location On Toolbar
I would like to use the attached "menu maker" file I found on Ron De Bruin's site using a Sheet to build the menu, yet be able to place it before the Help menu as suggested by this site [url] by finding the position of Help. I have amended the code yet receive a "Compile error: Variable not defined" error.
View Replies!
View Related
Extract Data From A Specific Location In A Text File
I have been trying to work this out by looking at other posts (mostly concerning Binary Access) but can't figure it! The source text files I am using can vary in length from 4,000 characters to well over 100,000 characters. However the data I am looking for always starts 40 characters from the end of the file and is 10 characters long! I need my macro to pick out this data and store it as a string (so it can be added to an array and exported to a worksheet later)
View Replies!
View Related
Macro To Copy Specific Cells From Row From Source & Stop When Next Row Cell = Specific Value
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30) After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred. Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that. Sheets("ee template").Copy After:=Sheets(3) ActiveSheet.Unprotect Selection.ClearContents Range("I7").Select Selection.ClearContents Range("C7").Select Sheets("source").Select ActiveCell.Offset(0, -11).Range("A1").Select
View Replies!
View Related
Copy The Information From The Row Directly Above The New Row And Paste (values, Formulas, Formats, Etc) Into The New Row
1. In whatever cell is selected when the macro is run, enter a new row. 2. Copy the information from the row directly above the new row and paste (values, formulas, formats, etc) into the new row. 3. Return to column P in the new row, i.e if the new row is row 11, then return to P11, for row 12 return to P12, etc. I have tried recording the macro but because it is hard coded to specific rows, its not working. I have attached a sample copy of the sheet (had to zip due to the size of the file).
View Replies!
View Related
Auto-Fill
I currently have this code ( which works perfect ) that was written by someone else. It performs an auto-fill in column "A". I need to learn how to adjust this code to do it for other columns, but do not know currently. Maybe someone could highlight of BOLD the adjustments to direct the code to the column. Sub fill_rows_A_4() Dim arrTmp As Variant Dim lngRow As Long With Worksheets("sheet1") 'adapt arrTmp = .Range(.Cells(1, 1), .Cells(.Rows.Count, 1).End(xlUp)) For lngRow = 1 To UBound(arrTmp) If arrTmp(lngRow, 1) = "" Then arrTmp(lngRow, 1) = arrTmp(lngRow - 1, 1) Next .Range(.Cells(1, 1), .Cells(UBound(arrTmp), 1)) = arrTmp End With End Sub
View Replies!
View Related
VB For Auto-Fill
I need it to autofill just as if you selected range A1 and A2 and double clicked that little square on the bottom right hand side of the cell (so it stopps auto-filling at the last active cell in B)
View Replies!
View Related
Fill Blank Rows With Formulas
I want to copy an active cell in row 2 (I dont want to fix a cell as it can be any cell at any time). I want to copy it all the way down to a cell where the next row after it, is completely blank on all the 256 cells.
View Replies!
View Related
Auto Fill Sequence
I am fighting with this for a longer time now and can't find a solution: is it possible in Excel to generate a number sequence (to create a list for auto fill) representing numbers like this: 000001 000006 000002 000007 000003 000008 000004 000009 000005 000010 000011 000016 000012 000017 000013 000018 000014 000019 000015 000020 and so on till 001000
View Replies!
View Related
Auto Fill After Inserting
I have a macro set up to automatically fill all of the cells in certain columns with the top cell's formula in that column. This is so I don't have to go through and manually "fill down" the formulas into the blank cells after I insert a row into my database. The problems is, though, that the macro sometimes takes a long a** time to run (and uses up a TON of memory...the doc. was 29,000 kb at one point!) because of the amount of rows & columns I have (approx. 5000 row & 34 columns) just one one sheet. Anyway, is there a way to set up something in VBA to have it auto fill in the formulas in the columns I choose, after I insert a row, with the information that preceeds it? So, for example, if I insert a row anywhere in my database, excel will know right away that I want that row filled w/ the formulas from the row above it.
View Replies!
View Related
Auto Fill Within Macro
my macro simply activates a cell and all i want it to do is to auto fill downwards! its intended to autofill down for about 100 rows but just cant figure it out! but keep in mind the cell is always going to change so it cant be fixed i.e this wont work: Selection.AutoFill Destination:=Range("C95:C659") Range("C95:C659").Select ActiveWindow.SmallScroll Down:=513 because i need it to be autofilled from the CURRENT active cell only!
View Replies!
View Related
Auto Fill (autocomplete)
when I fill the information into column B on pages 1-31 I would like it to refer to the location names from the loc-mileage sheet and fill in the suggested name as i'm typing. I thought about doing a drop down but the list is too long and I dont want it to be set to only use the list names, only suggest names from the list.
View Replies!
View Related
Auto Fill Address
i have just finished filling out a 2000 line spreadsheet, on this spread sheet i had a customer number i then had to look up the customer number on our old database to retrieve the address for the customer. Is there any way that for future spreadsheet's i can input the customer number and it will auto fill the address of that customer ? the columns on my sheet are: customer A/C number Customer Name Customer Address line 1 Customer Address line 2 Customer Address line 3 Postcode it would save me hours and hours of time digging through the database again.
View Replies!
View Related
Auto Fill Formula Using $
I created a database and made one small mistake doing it. The database is infinite amount of rows down and my formula needs to be corrected as such. In the current cells: (C1:C1000) i have the formulas referencing cells $B1, but i need it to reference $B$1. In C2 I need it to reference $B$2, C3 $B$3 and so on. If I autofill, it obviously just keeps the following cells at $B$1 and i can't keep the dollar bill sign.
View Replies!
View Related
How To Auto-Fill From Bottom Up
I use this code to start at the the top of the column going down, but the way my data is setup, I need it to start at the bottom and work up. Sub fillBlanksI() 'Declare variables Dim FR As Long, LR As Long, i As Long, FillVal As Variant 'Stop screen flicker and speed up code Application.ScreenUpdating = False 'Find the last row of any column in the sheet LR = ActiveSheet.UsedRange.Rows.Count 'Loop from row i downwards until we find a value - this is the first filled row and assign its value to FillVal
View Replies!
View Related
Auto Fill Cells...
Working with 2 worksheets in the same spreadsheet. In worksheet A cell F6 is a solution (hex2dec) these solutions are staggered consistently in column F (F6, F9, F12, F15 etc) In worksheet B cell A2 displays workshop A cell F6 details (=ATR!F6) Worksheet B cell A3 Autofil uses (=ATR!F7) I want (=ATR!F9) Worksheet B cell A4 I want (=ATR!F12) How do I condition autofil to follow my chosen sequence ie F6,F9,F12,F15 etc...
View Replies!
View Related
Auto Fill Into The Other Pages
I'm trying to set up a multi page report where some of the same information is repeated into a several forms. Is there a way I can set this up to where I type it into the one section and it will auto fill into the other pages I need the same information?
View Replies!
View Related
Auto Fill Alphabet
I want to be able to type 'A' in cell A1, then autofill down to get: A1: A A2: B A3: C A4: D A5: E Etc. Once I get to cell A26, which would be "Z", I want to continue to get: A26: Z A27: AA A28: AB A29: AC A30: AD how I could do this? I tried dragging cell A1 down but it just returns the result of "A" in all the rows.
View Replies!
View Related
Worksheet Link Search And Fill Formulas
I want to create a spreadsheet table of values that are linked other spreadsheets, a condesnsed version... I am not a total amateur and I understand the world of excel links.... However the problem lies in the fact that the source files change format every day, what i need is a formula for each cell (i know...) that can: 1. Firstly find column and row heading titles by looking for part of the title i.e. for a title like 'Occupation' i need a non case sensitive search for 'Occu'. 2. Once colum and row are found, return the intesecting value. The formulas are needed so all I will have to do, after this is finished, is update the source files and the relevant numbers will be found automatically. Im sure this is something that can be done with a clever array formula, setup to recognise column and row intersections based on positve returns on search variables, however this one is just outside my capabilities....
View Replies!
View Related
Auto-fill Color Among Different Sheets
I'm using Excel 2007 and need some color help. I'm making a spreadsheet based on goals. Sheet 1 is the main sheet where every employee's progress is seen at once. Sheet 2, 3, 4 are my employee's individual pages where they log their progress. They simply fill a cell red if they've failed a goal, yellow if it's in progress, and green if they were successful. If Jim fills cell E4 green on his individual sheet (Sheet 2), how can I make cell E4 on Sheet 1 turn green as well?
View Replies!
View Related
What IF Auto Fill Date Formula
I would like to auto fill the present date if another cell of the same row is typed in and then lock that cell with the date. For example. If someone types in cell A2 then I would like to auto fill D2 with the date 11/01/2007 and lock it. If someone tomorrow types in cell A3 then the date would once again be autofilled in D3 to 11/02/2007 while D2 would still display 11/01/2007.
View Replies!
View Related
Auto Fill From Cell Range
I have a spreadsheet that is downloaded from an accounting system and requires extensive editing to be normalized before it is combined with data in another database. To normalize the data in a simple manner, I use the following macro: Sub All() Rows("1:37").Select Selection.Delete Shift:=xlUp Sheets("DL").Select Columns("A:D").Select Selection.Insert Shift:=xlToRight Range("A1").Select ActiveCell.FormulaR1C1 = "Check" Range("B1").Select ActiveCell.FormulaR1C1 = "Benefitor"........................ It works great, however I would like to not limit my cell ranges for the auto fills. I would like to auto fill to the end of the data, which changes with every download (additional rows).
View Replies!
View Related
Auto Fill With One Of Two Drop Down Lists...?
I am trying to do this in several cells/several ways, looking for the generic formula, here is one example: If User selects "Expenses" in 'Activity' B3 from drop down list of "Expenses" or "Income". I want C3 to populate with drop down list - the words to choose from are listed in 'Expenses' B1:AI1 If User selects "income" in 'Activity' B3 from drop down list of "Expenses" or "Income". I want C3 to populate with drop down list - the words to choose from are listed in 'Income' B3:AI3
View Replies!
View Related
|
TRACKER
