I would appreciate some ones help to correct a macro I'm trying to write. The macro copies 3 columns from Sheet1 to Sheet2 in a selected location. The 3rd column copied needs to be pasted in a different column in Sheet2.
View 6 RepliesI have recorded the below macro and I am not very happy with it. enhance the macro and add the following:
I need to copy the range "ROW" and past it below the range "MENU". Also the range "ROW" (ROW = copy of 3 line with some cells merged) is hidden.
I need to unhide and hide back the rang ROW. Right know I have to leave the range appearing otherwise my macro doesn't work.
HTML Code:Â
Sub ADD()
' ActiveWindow.LargeScroll Down:=2
Range("ROW").Select
Range("ROW").Activate
Application.CutCopyMode = False
Selection.Copy
' ActiveWindow.LargeScroll Down:=-2
Rows("7:7").Select
Selection.Insert Shift:=xlDown
Range("A7:A9").Select
End Sub
I have code that has the user identify a file and then it puts that file location in a cell within the workbook
"Y:MastersProPricerENG WBS BOEXYZ.xlsx"
I want to copy a tab from the active workbook ("Resources (Spread or Load)") and move it to the workbook listed above.
I am designing a form that tracks call times. I have a control "cmdStart" that when clicked will enter the "Start" time in cell A4 and each time clicked will skip a column and enter the next time in cell C4. The same for a control "cmdEnd" that will enter the "End" time in cell B4 when clicked. Then the next end time clicked will go in cell D4. However, when the Start time enters the time in AE4 I need the next start time to start in A6 and do the same in this row until AE6 and then drop down again. The same with the "End" time when it reaches AF6. I think I could write the If and Else for each individual cell, but there must be a more efficient way to do this.
View 4 Replies View Relatedcopy range of data from "sheet1" to sheets named A-Z i.e A,B,C,D,E..... in the same location as it was on sheet1 e.g. if on sheet1 data was in B1:C10. i want to copy this onto the sheets named from A to Z in the lacation.
View 9 Replies View RelatedIs there any way to use the offset formula in reference to the location of another cell?
Here is a simplified version of my problem:
Sheet1!A1 refers to Sheet2!A1.
Sheet1!B1 refers to Sheet2!D1.
Sheet1!C1 refers to Sheet2!E1.
Is there any way that I can say that Sheet1!A1=Sheet2!A1 and then use the offset formula based on the location referenced in Sheet1!A1? The cells being referenced are merged cells one column wide and varying rows long, so there is no real pattern to follow except that the corresponding cells (the ones that I want to use the offset formula on) are all taking up the same amount of rows and are an equal amount of columns over (Sheet1!B1 refers to 3 columns over from Sheet2!A1, Sheet1!B1 refers to 4 columns over from Sheet2!A1). The spreadsheet is a fairly complex one and it would be much cleaner and less likely to have any mistakes if I was not referencing each cell individually.
I'm trying to copy a range, specified by an offset, then PasteSpecial that range to yet another location specified by an offset.
This is the code I have so far, which does not attempt to find the range to copy via an offset.
Can i convert this
ActiveCell. Offset(-1, 0).Copy
With ActiveCell
.PasteSpecial Paste:=xlPasteFormats, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
.ClearOutline
End With
So that i can copy/paste the Offset range such as (-1,-2) (-1,1)?
Sub TestSearch()
Dim FoundCell As Range
Dim SearchString As Variant
'Specify Value to Search
SearchString = " Excel"
'Perform the Search and Return a Cell Value
Set FoundCell = Worksheets("Source").Range("A1:A10000").Find(" Excel", lookat:=xlPart)
If Not FoundCell Is Nothing Then
MsgBox "Found at " & FoundCell.Address
End If
End Sub
I'd like to take the code above, which returns a cell address which contains the text " Excel" and modify or add to it the capability to copy a range starting from the address returned and ending 102 cells further down in Column A on the Source sheet to A1 of the Sheet1 sheet. The crux of the problem seems to be converting the address to a row number then adding the value of the number of cells in the range to find the end row number then converting that back to an address??
What can I add to the macro I already have in place (below) to accomplish what I'm looking for (2 parts)? ...
1) I need to copy everything (formulas) that is in C7:F7 and paste it down to all "active" rows - I'm defining an active row by any row where column A is not blank.
2) I need to copy everything (formulas) that is in Q7:AF7 and paste it down to all "active" rows - I'm defining an active row by any row where column P is not blank. (You'll notice by the screenshot that there will be blank cells in column P mixed in with non-blank cells.)
Code:
Sub AdminTool()
'
' CreateAdminTool Macro
'
'
ActiveWindow.Zoom = 90
Rows("1:1").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
[Code] ...........
Given the following data located in Sheet1 of a Workbook -
•I have seven columns (assume header row names are “A, B, C, D, E, F, G”) each containing numeric data in random order.
•All columns are of the same length (equal number of rows), followed by a blank cell, but the number of rows is unknown.
•Columns with header row names A-E will only contain numbers from 0 to 100, while F and G may contain numbers from -127 to +128.
Here is what I would like to do –
I would like to be able to analyze the data in columns A-D to locate rows that contain specific combinations of values (ex. row 41 contains the values 50, 0, 0, 0 and row 239 contains values 100, 0, 0, 0 in columns A – D, respectively, etc.).
For each row that is found to contain one of these combinations (there are many different combinations required), I would like to copy the associated values from columns E, F, & G for that row, and paste them into their respective (E, F, & G) columns located on Sheet2 of the same workbook. However, I would like to paste the E, F, & G values into a specific row order on Sheet2, DETERMINED by the value of the A – D combination identified on Sheet1.
Continuing with the ex. above, let’s say I would like to have the EFG values from row 239 in Sheet1 copied to row 10 in Sheet2, while the EFG values from row 41, Sheet1, are to be copied to row 11 in Sheet2.
In effect, I would like to create a table of this subset of data, in a specific order, from which I could work later.
I can do this manually using “ AutoFilter” to locate the data I need and then write formulas to copy the data from Sheet1 to Sheet2 in the order that I need, but every time the order of the original data on Sheet1 changes I have to start all over.
(I am using Excel version 14.0.7106 and MS Office Professional 2010.)
I have a macro in which I have named a range of numbers in a spreadsheet, used the "find" function to find a particular number in that range, and now would like to copy some information into a cell in the same row as the found number. However, when I try to move over to the cell that I'm copying to, it only goes to the 1st row in the range that I have defined.
Here's the portion of code I think you need to see. Everything works...it finds a match...but then I don't know what to do from there to get the information to the correct row:
'Grab the 1st project number
Range("C8").Select
Do Until ActiveCell.Value = ""
If ActiveCell.Value "" Then
prjnum = ActiveCell.Value
Selection.Offset(0, 8).Select
[Code] ..............
I am trying to generate a folder within a specific location (For now lets call it C:Jobs) that will be named as per the adjacent cell (Column H on attached)
Obviously if the folder already exists I want the code to stop.
But this code will have to generate a different folder for each row within the spreadsheet.
I've been searching for ages trying to work out how to do this but have so far only managed to confuse myself. i have office 2007 and I have found some code to convert an excel sheet to PDF, however I need it to saveas the contents of cell (e6) and save to a location on our network drives (C:TEMP).
View 2 Replies View RelatedI have an Excel file to distribute to users. This file must contain Hyperlinks to a Word file which i will enbed in a sheet of the Excel file itself. My question is this: Is it possible to produce Hyperlinks that go to the specific part of the Word document? So far, i am only able to Hyperlink to the first page of the Word doc, by doing a macro.
View 2 Replies View RelatedI have a worksheet which contains daily results and want to copy the formulas within the Cell F2 but only copy into the cells where the data has recently been added.
EG: Within the attached worksheet i have just entered the data for the 03/06/2014, so i only want the formula to be copied into column F for this range.
Potential it could the vb code could look at Column B and if blank then paste.
I have a timeline in tab 1. I want to copy a specific cell range from tab 1 to tab 2 but when I make an edit to tab 1, I want it to show up on tab 2 automatically. I believe that's cell referencing but how do I reference an entire range?
View 1 Replies View RelatedI am running a macro in Excel which automatically generates a PDF of my worksheet. Currently it saves in the default location but i want to modify it to a specific location - P:Emergency Services|Procative ContactForms PDF.
The current code is;
VB:
ActiveSheet.ExportAsFixedFormat Type:=xlTypePDF, Filename:=Range("E7").Value _
, Quality:=xlQualityStandard, IncludeDocProperties:=True, IgnorePrintAreas _
:=False, OpenAfterPublish:=True
Range("A1:E43").Select
I know Excel is not the best tool for formatting sentences, but is there a way to insert a Line-Break based on a condition? (Either using Formula or VBA).
The situation is:A fixed-width cell, is a concatenation of 5 strings. Each of these 5 strings is a small sentence of 3-6 words; individually much smaller than the cell-width.2 of these 5 are fixed (one at start, one at the end). The other 3 are results of their respective "IF" formulas.Hence, the final sentence wraps over 2-3 lines.I need the 3rd & 5th sentence (the whole sentence, all 3-6 words of it) to start in a new line, only if they are going to be wrapped into two lines.
So If the wrapping results in:
String1 String2 Stri
ng3 String4 Stri
ng5
Then change it to:
String1 String2
String3 String4
String5
I would like to use the attached "menu maker" file I found on Ron De Bruin's site using a Sheet to build the menu, yet be able to place it before the Help menu as suggested by this site [url] by finding the position of Help.
I have amended the code yet receive a "Compile error: Variable not defined" error.
I have been trying to write VBA which basicly search for specific value in column A and copy values from that cell to down and two columns next. Select row and columns down after specific value in column A was find.
Like this
A B C
... ... ...
X 100 115
... ... ...
up to last row
I try with VBA below but it do not works.
Sub Select_Rows_GK()
Dim LR As Long, i As Long
LR = Range("A" & Rows.Count).End(xlUp).Row
For i = 1 To LR
If Range("A" & i).Value = "9000" Then
Range("A" & Rows.Count).Offset(0, 1).Select
Do While Not IsEmpty(ActiveCell)
ActiveCell.Offset(0, 1).Select
Loop
Exit For
End If
Next i
End Sub
I have a spreadsheet where I track resources needed on a project. Each resource that is selected in the resource column has a corresponding % avg and an average number of months where the resource is used. % Avg and # of Months are found in a different worksheet.
What I am looking to do is, for example: if resource A will be on the project starting in May 2015 and assigned at 30% for 7 months, I want to populate 30% starting in the colunm labeled May 2015 and copy the 30% so that a total of 7 months are populated. Also, if any of the values change (i.e: the Resource Name or the Start Month) I want to erase all the percentages that were entered in the row. How can I achieve that with a VBA code? I have formulas that retrieve the # of Months and the % Avg already.
These are the columns that I have in my spreadsheet:
Resource NameStart MonthJan-15Feb-15Mar-15Apr-15May-15Jun-15Jul-15Aug-15Sep-15
Im struggling to get a workbook to a specific location. I have copied 3 worksheets to a new workbook, which im trying to save to an archive folder. Here is my code.
Code:
Sub atest()
Dim strFileName As String
Dim Archivepath As String
[Code]....
The problem is i keep getting an error (runtime 1004) saying the file could not be found?? well, im trying to create it !..
I have a User form with a combo box that is populated with numbers (1 thru 50) and four text boxes for first name, last name, email & cell number.
It all works fine. However: I would like it to transfer the data to (Sheet3) in numerical order... In other words, If the user picks number 5 his data would be entered in the fifth row.(or sixth counting header). Or if he chooses number 37, his info would be entered into row 37 (38 with header) of (Sheet3)
It currently populates the next empty row.
My code is below, How would I modify it to accomplish this?
Code:
Private Sub EnterButton_Click()
'Populates GetNumber Combo Box
Dim w As Worksheet, x As Long
Set w = Sheets("Sheet2")
x = w.Columns(19).Find(Me.GetNum.Value, lookat:=xlWhole, LookIn:=xlValues).Row
w.Range("S" & x).Delete
[Code] ............
I have a excel sheet which is completely formula driven and no macros in that.
I want to macro which can save that excel sheet to a specific location.
I have been trying to work this out by looking at other posts (mostly concerning Binary Access) but can't figure it! The source text files I am using can vary in length from 4,000 characters to well over 100,000 characters. However the data I am looking for always starts 40 characters from the end of the file and is 10 characters long! I need my macro to pick out this data and store it as a string (so it can be added to an array and exported to a worksheet later)
View 2 Replies View RelatedWhat I need is to insert a row at row 59 and autofill the formulas including drop down list from the above row. This is what I have so far (Thanks to Reafidy and shg).
Sub ChkDates()
Dim c As Range
Dim DelRng As Range
Dim ArcRng As Range
Dim i As Long
Dim l As Integer
Application. ScreenUpdating = False
Worksheets("Report").Activate
For i = 60 To 8 Step -1
Set c = Cells(i, 33)
If IsDate(c) Then ..............
Is there any way to copy a column that has a specific range
=COUNTIF(B10:BE10,"*p")
=COUNTIF(B12:BE12,"*p") etc
to copy that to a column lets say 5 columns to the right without my range changing?
=COUNTIF(G10:BJ10,"*p")
=COUNTIF(G12:BJ12,"*p")
I need the same range in all columns, and I cant seem to accomplish this.
That does allow me to filter the output in Master, but ideally what I would want to do is not have to set aside 300 lines in the Master file for each of the Staff files. Conceptually, I'd like to have the spreadsheets Staff A, Staff B, etc. look for and export only lines which have data in them and then have Master bring those lines in automatically. This may not be possible, in which case your suggested solution is the best approach.
View 9 Replies View RelatedEssentially I need to copy the first 8 cells in a row in one sheet (for example: A3:I3) when the word "Actuals" is entered into A3 from a drop down list. Then the copied data needs to be pasted to a another existing worksheet in the same workbook in the next available row. The data includes mostly values, but there is a formula in column H that creates a hyperlink out of the content in column G, friendly name in column I.
I am not stuck on the idea of having "Actuals" entered in column A as the trigger or change event and there will be times when a new copy/paste of the same data will need to be done more than once at a later date.
For further information, column B contains a serial number/productID number.