Inserting New Rows In Some Specific Way?
Apr 8, 2014I have entered the current format of the data and the required format as well...
View 3 Replies
ADVERTISEMENT
Inserting Specific Cell Into A Comment?
Sep 15, 2014My situation is like this:
-I have two sets of data in two different sheets. The data is similar, but it is taken in two ferent times, so there are some cells, which content has changed.
-I want to make a macro that identifies the changes in the latter (newer) sheet compared two the older one and to:
a) Highlight the cells (this works)
b) Add a comment to each cell that has changed so that the content of the comment is the content of the "older" cell. (so that one can easily see from the newer sheet that highlighted cells have new values and the old values are in the comment) (this is not working)
Here's my code so far. Like I said I can't make the comment work. I tried it with the same text in all comments ("test comment") and it worked but I can't make it to go and get the data from my older sheet.
OLDER = my sheet with old data
NEWER = my sheet with updated data
NEWTABLE = my table on the NEWER sheet where I want to check the changes
[Code].....
Finding A Specific Row And Inserting Data?
Mar 3, 2014I have a column with lots of rows. I want to locate a specific one and insert some data into this row at specific columns. This is what i have come up with so far:
[Code] .....
Inserting VLOOKUP CODE Into A SPECIFIC Cell
Jun 7, 2006i have this super huge worksheet im working with and im trying to insert a vlookup forumla at the first blank cell at the end of each column. for some reason when i tried:
Range("B" & lastrowB + 1).FormulaR1C1 = "test"
it worked but.. when i tried
Range("B" & lastrowB + 1).FormulaR1C1 = "=VLOOKUP(A2435,[tmp.xls]vRptMOMarkToHedgeFacilities!$A:$BF,7,0)"
it didn't work. giving me an error on that line stating: Run-time error '1004': Application-defined or object-defined error.
Macro To Convert Text To Rows - Inserting Rows
Mar 27, 2013I have cells (all in one column) containing text separated by commas e.g. (SD-299, SD-200, SD-300)
I am trying to transpose the text in these cells into rows.
VB:
Sub SplitAndTranspose()
Dim N() As String
N = Split(ActiveCell, ", ")
ActiveCell.Resize(UBound(N) + 1) = WorksheetFunction.Transpose(N)
End Sub
The problem with that is that when transposing it does not shift the cells down (/ insert new rows) so I lose the data already in the cells underneath.
Also, that macro would only apply to one cell I would like to be able to apply it all the data in the specific column on my Sheet.
Inserting Formula Tied To Specific Column Into Macro
Jul 25, 2014I want to insert a formula that is tied to a specific column. I know how to do formulas and have a slight understanding of macros. Can I insert the formula as part of a larger macro?
View 3 Replies View RelatedInserting New Rows / Copying From Additional Rows
May 25, 2013I'm not great anyways with VBA Macro.Effectively, here is my issue. I have a spreadsheet which is really badly designed.In one column I have multiple numbers separated by a comma. I need this data separated into new individual rows, but at the same time, copying the data in the other columns in that row to the new row.
Example of what I have:
Test 1 54 email1
Test 2 32, 343, 63, 34 email2
Test 3 4934, 5342 email 3
What I need:
Test 1 54 email1
Test 2 32 email2
Test 2 343 email2
Test 2 63 email2
Test 2 34 email2
Test 3 4934 email3
Test 3 5342 email3
I have have the following code below which paste everything into a new column and into a new row, but the problem I have is that it does not push the other rows data down, nor does it copy the 1st rows data (for that data set) into the new rows created.
Code:
Option Explicit
Sub Macro1()
Dim fromCol As String
Dim toCol As String
Dim fromRow As String
Dim toRow As String
Dim inVal As String
Dim outVal As String
[Code] ........
The amount of rows I have, so this manually (text to column, then transcoding etc) it out of the questions (i have 1000 rows of this!)
Counting Rows And Inserting Blank Rows
Dec 31, 2008I have an excel sheet that has the A column populated with many different things.
I'm not sure how possible it is, but I'm trying to group everything up by 7s and putting a space in between the groups.
So...
ABCDEFG1
ABCDEFG2
ABCDEFG3
ABCDEFG4
ABCDEFG5
ABCDEFG6
ABCDEFG7
HIJKLMNOP1
HIJKLMNOP2
HIJKLMNOP3
HIJKLMNOP4
HIJKLMNOP5
HIJKLMNOP6
HIJKLMNOP7
QRSTUV1
QRSTUV2
QRSTUV3
QRSTUV4
QRSTUV5
QRSTUV6
QRSTUV7
Would turn into
ABCDEFG1
ABCDEFG2
ABCDEFG3
ABCDEFG4
ABCDEFG5
ABCDEFG6
ABCDEFG7
HIJKLMNOP1
HIJKLMNOP2
HIJKLMNOP3
HIJKLMNOP4
HIJKLMNOP5
HIJKLMNOP6
HIJKLMNOP7
QRSTUV1
QRSTUV2
QRSTUV3
QRSTUV4
QRSTUV5
QRSTUV6
QRSTUV7
Inserting Four Rows
Jun 7, 2007I have a workbook with over 500 rows and those rows are divided in diferent sections, to which I have left five empty rows to add more data, the problem is, how do I add four more rows once I have only one empty row of the five empty ones I had previous? There's also a formula on column H that I'd like to be copied down on to the newly added rows.
I don't know how I'm gonna deal with the rest of the other data that is gonna shift down as more rows are added, I said this because I want to be able to do the same on all the sections I have.
Inserting Rows In A Sheet
May 29, 2013I have an excel sheet, where I want to insert a column or more columns between row C and D. The file is attached below. Usually, I would right click row D and choose "insert column". This does not work here. How would you do it?
View 2 Replies View RelatedInserting Rows As A Title
Jun 23, 2014How do I insert a row with A-N Merged and centered? Interior color should be dark blue with white font.
Currently I'm doing this to add a space based on a number I have in a column S.
[Code] .....
In column S I have a series of numbers 1 - 5 and when a unique number is found Insert this row I can't seem to figure out how to create.
[Code] .....
Inserting Multiple Rows
Nov 2, 2010I am new to VBA and am trying to insert 20 blank rows to my spreadsheet. I know how to add one row, but am not sure how to add 20 rows without repeating the same line of code 20 times.
View 6 Replies View RelatedInserting Rows Between Data?
Dec 21, 2011i have a spread sheet that has a number of different addresses in them I need a vb code that will insert 5 rows between each row of data starting from row 42 and has the possiblity of running to the end of the rows 65536. i believe the best way to do it is via column B which will always have data in it. i have tried a number of methods but they all only insert the rows once or they do it the required ammount of times one after the other so i end up with a whole section of blank rows and all my data still together.
View 4 Replies View RelatedInserting Random Rows
Jun 13, 2007I have 2 columns of raw data. With
column one containing the document Names.
and column two containing the document titles
i.e
Column 1
Doc 1
Doc 1b
Doc 2b
Doc 3
Doc 10
Doc 11.5
Column 2
Manual 1
Manual 1
Manual 1
Manual 2
Manual 2
manual 3
Manual 4
I am looking to be able to reform this information on another sheet to look like this :-
Column 1
Manual 1
Doc 1
Doc 1b
Doc 2b
Manual 2
Doc 3
Doc 10
Manual 3
Doc 11.5
Manual 4
Now I have created an addional column on an other sheet which checks for the row number where a new manual appears. and I have made this look like the row I would like to insert.
The idea i have is to use the above Numbers and the row itself and insert it in to the formated report (working from the bottom though). With this doen for each manual name change.
the number of Documents per manual can vary....
how to write the marco for this
Inserting Rows From An Inputbox
Sep 24, 2007I have a store report, which every now and again needs to have a new line added for a new store that has been opened. I need a inputbox to display so that you enter a "store number". Once you enter the store number, the macro adds a new line to add the store number in numberical order.
Inserting 24 Blank Rows
Sep 13, 2008Looking for assistance in inserting 24 blank rows in between a column of names. And if not too much trouble have the ability to enter the number of blank rows to insert.
Before:
Column A
name1
name2
name3
etc.
After:
name1
blank row
blank row
etc.
name2
blank row
blank row
etc.
name3
blank row
blank row
etc.
Macro For Inserting Rows, After Every Nth Row
Aug 8, 2006I need to insert a new row, in a spreadsheet, after every ninth row that now exists. How is this easiest done?
View 3 Replies View RelatedInserting Rows Below Each Subtotal
Jun 4, 2007I would like to insert rows below each of the subtotals in column D and F in the attached sheet. The current code I am using can only add rows according to one column. I don't know how to modify it so that it works on both columns. Also, when rows are added according to column D, the new inserted rows are filled with colors and I don't know how to remove. Lastly, how can I run this marco in multiple sheets?
Sub InsertRows()
Dim i As Integer
Dim rRw As Range
Set rRw = Range("D1")
For i = 1 To WorksheetFunction.CountIf(Columns(4), "* Total")
Set rRw = Columns(4). Find(What:="* Total", After:=rRw.Offset(2, 0), LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False)
If rRw.Value <> "Grand Total" Then
rRw.Offset(1, 0).EntireRow.Insert
End If
Next i
Set rRw = Nothing
End Sub
Inserting Rows In Variable Positions?
Nov 23, 2012I'm analysing some data sets with variable content, and need to insert blank rows every so often to provide space to do some analysis. The problem I have is that the position of the blank rows change according to the data set, I have been able to calculate how often the row needs to be inserted using VBA as part of my import routine and saved this value to a cell, but I cant figure out how to write the VBA which will insert rows using this value and stop at the end of the data set.
In the attached example I need to insert a row each time the data in column 2 (name) changes, this is the value I have calculated which in this example is 7. So in this attached file I need to insert a row in row 2, row 9 and so on etc. But this is what changes depending upon the "Product" held in colum 1.
Update Formula After Inserting Rows?
May 4, 2014I have some formula's that look at a range of rows
[Code] .....
The trouble is I insert rows to add new data to my sheet, this then changes the formula. $A$9 then becomes $A$10, I don't want this. I want the start of the formula to stay the same. How do I do this?
Inserting Rows On Multiple Pages
Mar 21, 2006I am working on a database with Names and Volunteer Hours worked over about five years.
What I have is one sheet with names and info, and the respective sheets for each year and different events they worked that year.
on each year sheet I have only the first and last name, which is all that I need for personal info. I have these names on the seet using the sheet1!A1 formula. However whenever I add someone new they will not update the new row on the other sheets, they will simply ignore it. How can I make it respect my row updates?
Inserting Same Rows Into Bottom Row Of Different Tabs?
Jan 9, 2013Quick way of inserting the same rows into the bottom row of different tabs, the difficultly comes as the bottom row of the other tabs varies. I.e tab 2 the bottom row is row 87, tab 3 the bottom row is 53 etc.
View 1 Replies View RelatedInserting Rows Or Column In Excel?
May 2, 2014macro for inserting rows and column in Excel.
View 1 Replies View RelatedCopy Formula When Inserting Rows
Aug 4, 2008Need "Copy formula when Inserting rows". For instance, A1=5, B1=10 but my formula set far behind in AE1=SUM(A1:B1). So,when I insert new row, I have to go to AE to drag the formula, is there any Macro or tips to simplify it?
View 14 Replies View RelatedMacro - Inserting Multiple Rows
Feb 23, 2009see the attachment. You will see that I have recorded two macros:
1) To insert a new row for new people.
2) To insert a row for new animals.
With regards to 1), I would like to create a macro that copies the contents of the row with the penultimate name in the people section, and for a new row to be inserted beneath the copied cell. Similarly, with regards to 2) I would like to create a macro that copies the contents of the row with the penultimate name in the animal section, and for a new row to be inserted beneath the copied cell.
The issue that I have is that the macros do not copy the penultimate cell in each section, but copy a particular row, say row 11 each time I want to insert a new animal. So if I had inserted numerous new rows for the people section, and subsequently wanted to insert a new row for the animal section, I press “crtl+sht+a” which copies the contents of row 11 and which is not the contents of the penultimate row for the animal section.
Inserting Mulitple Rows Using Macro
Mar 18, 2009I'm trying to write a macro that inserts multiple rows by giving user a MsgBox to enter the # of desired rows. Meanwhile, I need to make sure that the formulas in certain cells are filled down (not just copied from cell directly above). I put something together but it's only adding a single row. Attached is my sample workbook.
View 2 Replies View RelatedMoving Down A Chart When Inserting Rows
Nov 6, 2009I've been inserting some rows in some sheets and everything is sound... Until I meet a chart! Charts in general are terrain I yet have to explore (and will be coming Monday)...
I insert a row like this: ...
Finding Last Row Of Data When Inserting Rows
Mar 27, 2012I've written the following code to insert rows at certain points depending on certain conditions, looping through to the last row. However, as the last row number keeps moving, due to inserting rows, I am not sure how to alter the code to allow for this.
Dim LastRow As Long
With ActiveSheet
LastRow = .Cells(.Rows.Count, "A").End(xlUp).Row
End With
[Code]......
Inserting Blank Rows And Sorting
Nov 21, 2012Below is just a part of my very long list of statement that I posted into column A, B and C of excel worksheet:
10
67.12
03-Oct-12
10
85.16
02-Oct-12
[Code] ........
Any formula or macro that can automatically change to below expectation such as inserting 3-blank rows, totaling and sorting the date.
10
85.16
2-Oct-12
10
67.12
3-Oct-12
[Code] .........
Inserting Rows And Sheet Protection?
Jan 8, 2013I have a piece of code with a couple of errors. The code selects a certain row and then copies and inserts this row on the last line with data, the number of rows is decided by the user via a form. The line of code with the error is highlighted, think it is a syntax/grammar error.
Code:
Sub InsertRows()
'
' Inserting Rows
ActiveSheet.Unprotect
FormRowInsert.Show
Application.ScreenUpdating = False
[code]....