I've written the following code to insert rows at certain points depending on certain conditions, looping through to the last row. However, as the last row number keeps moving, due to inserting rows, I am not sure how to alter the code to allow for this.
Dim LastRow As Long
With ActiveSheet
LastRow = .Cells(.Rows.Count, "A").End(xlUp).Row
End With
[Code]......
I've got data output (~500 rows) that's going into a larger, formatted sheet. The data going into the sheet is about 8 columns of material and the formatted sheet has over 20 columns (the rest to be filled out by the engineers). I'm tacking the new information to the bottom of the sheet (in the corresponding, non-consecutive columns), but the question now is how to format it.
Each location has recommendations, about 1-5 rows. What I want to do is insert a row after each different entry (probably by location address) so it will be more visually accessible (this is the format of the sheet).
I have a column with lots of rows. I want to locate a specific one and insert some data into this row at specific columns. This is what i have come up with so far:
[Code] .....
i have a spread sheet that has a number of different addresses in them I need a vb code that will insert 5 rows between each row of data starting from row 42 and has the possiblity of running to the end of the rows 65536. i believe the best way to do it is via column B which will always have data in it. i have tried a number of methods but they all only insert the rows once or they do it the required ammount of times one after the other so i end up with a whole section of blank rows and all my data still together.
View 4 Replies View RelatedI would like to know how can i insert a blank row in between ACC# when ever a new series of data begins
name Acc # Balance Date
John 2222 200 june 2013
John 2222 344 june 2013
John 2222 700 Sept 2013
Silva 4444 333 June 2013
Silva 4444 333 June 2013
Silva 4444 333 June 2013
Raff 5555 897 June 2015
Raff 5555 897 June 2015
Raff 5555 897 June 2015
Raff 5555 897 June 2015
I've got a spreadsheet that I prepare for a group that has patient data subtotalled by physicians. The problem is that the group uses this data for data entry and wants a blank row between each different patient name within the physicians subtotals and I have no clue how to get there. Any chance there might be some VBA code that could accomplish this?
View 4 Replies View RelatedOn sheet "Create Package" in cell "AA14" I have a value (lets say 2).
I want it to go to sheet "Samples" and insert a number of rows equal to the value on sheet "Create Package" cell "AA14" (so 2 rows)
I have a header row in row 1, so I would like it to insert the designated number of rows beneath that.
Then I would like it to copy a designated number of rows (based off of the "AA14" value, so 2) from the "Create Package" sheet starting at row 66 and then paste special values into the new rows that were inserted on sheet "samples".
Inserting Variable Number Of Rows and Populating Data
View 10 Replies View RelatedEach week I format a report that I receive that lists every product a particular employee closed. Its a list of each employee, the product and date. I'll have about 20-30 lines for each employee. I can easily sort by the employee name to have a nice list.
From here what I do is use a forumla to mark where each employee's name changes, then filter by that changed line and insert page breaks for each of these lines. Is there a way to macro this to save me time, having 270 employees takes alot of time still, because thats 270 manually inserted page breaks.
I have found this sales forecasting template from the Microsoft excel template section on the web, however, when i insert the new rows, it does not automatically update the "linked" sheets. It is the "detailed sales pipleline management sheet".
View 4 Replies View RelatedThe basis of my needs is to be able to find in a list of names, a duplicate name from previous list and then grab and populate a number from that row. Here is an example
A B C D
Doe,Jane $1000 $250 $750
Smith,John $700 $100 $600
Wilson,Alan $1500 $1500 $0
I update the list, some names are added and others taken away. When I add the new list, column C of every name is $0. I want the formula to find names from the previous list and populate Column C with the value of Column C + D of the corresponding name. Also I have a separate formula that simply is D=(B-C) The result of what I would want this to look like is this...
A B C D
Doe,Jane $1200 $1000 $200
Doe,John $500 $0 $500
Smith,John $1000 $700 $300
As you can see there was a new name added to the list (Doe,John) and a name taken away from the list (Wilson,Alan). Column C is the only Column that I am wanting to auto populate. The Value in Column B is a variable that is managed by another program so you don't have to worry about that.
Keep in mind there will be multiple instances of this list and the same name will occur more than once in the spreadsheet. There are not duplicate names that are different customers though as my other program takes care of that. eg. "Doe,John" and "Doe,John #2". I only want it to grab the information from the previous list not ones previous to that list(if that makes sense) third example...
A B C D
Doe,Jane $1500 $1200 $300
Doe,John $500 $500 $0
Miller,Joe $700 $0 $700
Smith, John $1300 $1000 $300
My current method of accomplishing this is to select the previous list and print it. I then go down the new list and cross reference it with the old one keying in the values by hand. This would be a huge time saver as the list is 250 names and growing. I hope I have given enough information but undoubtedly I have not. So feel free to ask me any questions and for more details. I did not want to go to in depth for fear of my post being to long.
One of my Worksheets gets populated, by another application, with variable number of Data Rows, each time.
sometimes, there are BLANK rows, as well, in between the consecutive data rows.
In one of my macros, I need to find the following:
Total number of rows, including blank and non-blank
Number of blank and number of non-blank rows.
I have multiple rows of data. Some have single invoice number and some have 3. I want to find the rows with multiple same invoice number by filtering then selecting certain data and paste to another sheet.
sheet1 A:I
Name
PO
Chemical
C/T
Center #
[Code]....
I have cells (all in one column) containing text separated by commas e.g. (SD-299, SD-200, SD-300)
I am trying to transpose the text in these cells into rows.
VB:
Sub SplitAndTranspose()
Dim N() As String
N = Split(ActiveCell, ", ")
ActiveCell.Resize(UBound(N) + 1) = WorksheetFunction.Transpose(N)
End Sub
The problem with that is that when transposing it does not shift the cells down (/ insert new rows) so I lose the data already in the cells underneath.
Also, that macro would only apply to one cell I would like to be able to apply it all the data in the specific column on my Sheet.
I'm not great anyways with VBA Macro.Effectively, here is my issue. I have a spreadsheet which is really badly designed.In one column I have multiple numbers separated by a comma. I need this data separated into new individual rows, but at the same time, copying the data in the other columns in that row to the new row.
Example of what I have:
Test 1 54 email1
Test 2 32, 343, 63, 34 email2
Test 3 4934, 5342 email 3
What I need:
Test 1 54 email1
Test 2 32 email2
Test 2 343 email2
Test 2 63 email2
Test 2 34 email2
Test 3 4934 email3
Test 3 5342 email3
I have have the following code below which paste everything into a new column and into a new row, but the problem I have is that it does not push the other rows data down, nor does it copy the 1st rows data (for that data set) into the new rows created.
Code:
Option Explicit
Sub Macro1()
Dim fromCol As String
Dim toCol As String
Dim fromRow As String
Dim toRow As String
Dim inVal As String
Dim outVal As String
[Code] ........
The amount of rows I have, so this manually (text to column, then transcoding etc) it out of the questions (i have 1000 rows of this!)
I have an excel sheet that has the A column populated with many different things.
I'm not sure how possible it is, but I'm trying to group everything up by 7s and putting a space in between the groups.
So...
ABCDEFG1
ABCDEFG2
ABCDEFG3
ABCDEFG4
ABCDEFG5
ABCDEFG6
ABCDEFG7
HIJKLMNOP1
HIJKLMNOP2
HIJKLMNOP3
HIJKLMNOP4
HIJKLMNOP5
HIJKLMNOP6
HIJKLMNOP7
QRSTUV1
QRSTUV2
QRSTUV3
QRSTUV4
QRSTUV5
QRSTUV6
QRSTUV7
Would turn into
ABCDEFG1
ABCDEFG2
ABCDEFG3
ABCDEFG4
ABCDEFG5
ABCDEFG6
ABCDEFG7
HIJKLMNOP1
HIJKLMNOP2
HIJKLMNOP3
HIJKLMNOP4
HIJKLMNOP5
HIJKLMNOP6
HIJKLMNOP7
QRSTUV1
QRSTUV2
QRSTUV3
QRSTUV4
QRSTUV5
QRSTUV6
QRSTUV7
I have a workbook with over 500 rows and those rows are divided in diferent sections, to which I have left five empty rows to add more data, the problem is, how do I add four more rows once I have only one empty row of the five empty ones I had previous? There's also a formula on column H that I'd like to be copied down on to the newly added rows.
I don't know how I'm gonna deal with the rest of the other data that is gonna shift down as more rows are added, I said this because I want to be able to do the same on all the sections I have.
I'd like to be able to search a spreadsheet for a specific word or series of characters. Once all of the ROWS that contain the characters are found, I'd like to be able to have another spreadsheet with ONLY those rows (all columns).
View 8 Replies View RelatedI have entered the current format of the data and the required format as well...
View 3 Replies View RelatedI have an excel sheet, where I want to insert a column or more columns between row C and D. The file is attached below. Usually, I would right click row D and choose "insert column". This does not work here. How would you do it?
View 2 Replies View RelatedHow do I insert a row with A-N Merged and centered? Interior color should be dark blue with white font.
Currently I'm doing this to add a space based on a number I have in a column S.
[Code] .....
In column S I have a series of numbers 1 - 5 and when a unique number is found Insert this row I can't seem to figure out how to create.
[Code] .....
I am new to VBA and am trying to insert 20 blank rows to my spreadsheet. I know how to add one row, but am not sure how to add 20 rows without repeating the same line of code 20 times.
View 6 Replies View RelatedI have 2 columns of raw data. With
column one containing the document Names.
and column two containing the document titles
i.e
Column 1
Doc 1
Doc 1b
Doc 2b
Doc 3
Doc 10
Doc 11.5
Column 2
Manual 1
Manual 1
Manual 1
Manual 2
Manual 2
manual 3
Manual 4
I am looking to be able to reform this information on another sheet to look like this :-
Column 1
Manual 1
Doc 1
Doc 1b
Doc 2b
Manual 2
Doc 3
Doc 10
Manual 3
Doc 11.5
Manual 4
Now I have created an addional column on an other sheet which checks for the row number where a new manual appears. and I have made this look like the row I would like to insert.
The idea i have is to use the above Numbers and the row itself and insert it in to the formated report (working from the bottom though). With this doen for each manual name change.
the number of Documents per manual can vary....
how to write the marco for this
I have a store report, which every now and again needs to have a new line added for a new store that has been opened. I need a inputbox to display so that you enter a "store number". Once you enter the store number, the macro adds a new line to add the store number in numberical order.
Looking for assistance in inserting 24 blank rows in between a column of names. And if not too much trouble have the ability to enter the number of blank rows to insert.
Before:
Column A
name1
name2
name3
etc.
After:
name1
blank row
blank row
etc.
name2
blank row
blank row
etc.
name3
blank row
blank row
etc.
I need to insert a new row, in a spreadsheet, after every ninth row that now exists. How is this easiest done?
View 3 Replies View RelatedI would like to insert rows below each of the subtotals in column D and F in the attached sheet. The current code I am using can only add rows according to one column. I don't know how to modify it so that it works on both columns. Also, when rows are added according to column D, the new inserted rows are filled with colors and I don't know how to remove. Lastly, how can I run this marco in multiple sheets?
Sub InsertRows()
Dim i As Integer
Dim rRw As Range
Set rRw = Range("D1")
For i = 1 To WorksheetFunction.CountIf(Columns(4), "* Total")
Set rRw = Columns(4). Find(What:="* Total", After:=rRw.Offset(2, 0), LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False)
If rRw.Value <> "Grand Total" Then
rRw.Offset(1, 0).EntireRow.Insert
End If
Next i
Set rRw = Nothing
End Sub
I'm analysing some data sets with variable content, and need to insert blank rows every so often to provide space to do some analysis. The problem I have is that the position of the blank rows change according to the data set, I have been able to calculate how often the row needs to be inserted using VBA as part of my import routine and saved this value to a cell, but I cant figure out how to write the VBA which will insert rows using this value and stop at the end of the data set.
In the attached example I need to insert a row each time the data in column 2 (name) changes, this is the value I have calculated which in this example is 7. So in this attached file I need to insert a row in row 2, row 9 and so on etc. But this is what changes depending upon the "Product" held in colum 1.
I have some formula's that look at a range of rows
[Code] .....
The trouble is I insert rows to add new data to my sheet, this then changes the formula. $A$9 then becomes $A$10, I don't want this. I want the start of the formula to stay the same. How do I do this?
I am working on a database with Names and Volunteer Hours worked over about five years.
What I have is one sheet with names and info, and the respective sheets for each year and different events they worked that year.
on each year sheet I have only the first and last name, which is all that I need for personal info. I have these names on the seet using the sheet1!A1 formula. However whenever I add someone new they will not update the new row on the other sheets, they will simply ignore it. How can I make it respect my row updates?