I've been inserting some rows in some sheets and everything is sound... Until I meet a chart! Charts in general are terrain I yet have to explore (and will be coming Monday)...
I insert a row like this: ...
I have text from subjects in rows, and I need to fill out the empty spaces with the specific text. For example my data looks like this:
Name1
Name2
Name3
Name4
Name5
Name6
I need it to fill out the empty cells below each name, with the top name so it looks like this:
Name1
Name1
Name1
Name2
Name2
Name3
[Code] ......
For example, one can see that Name3 has no empty cells below, hence it should just move on to the next (name4) etc.
Is there a way to display only the current month and the past 11 months in a Line Chart in Excel? So if I was to print Jan 2008 Excel graph, it would only display Feb 2007 - Jan 2008 data charting.
The spreadsheet of the data contains data for Jan 2005 - Jan 2008 so far, but only the current month with the past 11 months should display in the line chart depending on what is the current month.
I need a bit of VBA code which will run automatically when a csv file is opened. The code needs to move anything after column F onto the next row and repeat until there is no more data. The data is generated by an external program but is put on the same row (not sure why it does this). I have included an example of the csv file (the data in it is garbage so ignore it) for you to look at. the header row which needs inserting needs to be:
A1=Status
B1=Job No.
C1=Date
D1=Name
E1=Room
F1=Description
Hope this is enough information for you. bear in mind the amount of data being generated could be quite large. it has to be run automatically in order to be used in seamless mail merge.
I have an excel work book with 6 tabs. I would like to have Excel move an entire row from one tab to another tab (removing the row and inserting it in the other tab). I.e. Example I have a tab with items that are marked as "Open Actions" so if I were to change the drop down to close. Excel would move that entire row of actions to the tab with the "closed actions" and insert into the next available row. Now if someone were to come back at a later date say no it should be reopened than I would change the drop down to open and excel would move that row back to the open actions tab into next available row. I tried a PIVOT table and no good I played with few macro and not.
View 5 Replies View RelatedCan someone help me i have a few columns of information i need to move over to a another sheet, but the problem is the information i need to move is the end result of a formula and when i move it the answers are gone how do i fix this,,,,, and both sheets are on the same work book as well
is there a vlookup formula to use,,,im not experienced in Vlookup up formulas
I'm trying to write some code to move the position of a chart in a worksheet. The problem is that the chart has a strange nubmer assigned to it '24' and this increments everytime I delete it and run a macro to redraw it. Is there anyway to reference the chart generically so that I can modify its location automatically in the same macro, using the incrementleft statement?
I have tried 'activesheet.shapes.select' (or something similar - cannot remember the exact syntax I used) etc. but it didn't work.
I'm trying to use the below code to insert a chart into a userfom, i'm using a tutorial that I've seen used on a few sites.
So far I found this code on the internet, the chart is the worksheet PMC
Set CurrentChart = Sheets("PMC").ChartObject("PMC").Chart
Fname = ThisWorkbook.Path & " emp.gif"
CurrentChart.Export Filename:=Fname, FilterName:="GIF"
Dashboard.Image1.Picture = LoadPicture(Fname)
Trying to load the chart into the image control image1 on the dashboard userform.
The debugger keeps hitting the chartobject section and grinding to a halt.
I have seen other ways of doign this but they require access to different libraries and work is restrictive with these things!
Also I have tried:
Set CurrentChart = Sheets("PMC").ChartObject(1).Chart
Fname = ThisWorkbook.Path & " emp.gif"
CurrentChart.Export Filename:=Fname, FilterName:="GIF"
Dashboard.Image1.Picture = LoadPicture(Fname)
Also the error message i get is: Unable to get the chart objects property of the chart class
I have a feeling this is a stupid question, but I can't figure it out right now...
I have a worksheet with a bunch of charts as worksheets. I want to put command buttons on these charts. Whenever I select a tab which as a chart on it, my controls are grayed out, and I cannot insert a button. When I select a tab of a regular worksheet, I can insert buttons to my heart's content. Why can I not insert controls to the tabs which are charts? The ridiculous thing is, I have done it before. When I open that file, my buttons are on the chart. However, even in that sheet, I cannot insert more. Do I have a setting that I have changed, or somewhere I can look to enable the ability to put controls on a chart?
I have data that I am importing regularly and the number of lines of the data is highly variable. I have written code that first inserts a column of data I need for my Y axis, then the second part of my code should select the my X and Y range and change the graph accordingly then thirdly modify the limits of the major axis to the nearest largest multiple of 10 of the data. My sections 2 and three are not working properly.
Here is my code:
Sub Tip_Elevation()
'
' Tip_Elevation Macro
' Insert Tip Elevation Depth (Ft)
'
' Keyboard Shortcut: Ctrl+Shift+I
'Insert column needed for Y Axis
Cells.find(What:="Test").Activate
[Code]....
I have an embedded chart with a data series and a horizontal line that changes position (y-intercept) by values entered into a textbox. To make the process more user friendly, I would like to allow the user to select this horizontal line and reposition it inside the chart with the mouse. The new y-intercept of the line should then be displayable (textbox, cell, whatever). From what I have read on Peltier's site, I will definitely need to write a new class. Classes in VBA is not something I am particularly familiar with..
View 5 Replies View RelatedI need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014
28/1/2014
28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
removing duplicate rows and move other data frm rows to columns.xlsx.
I am attaching a sample excel sheet showing what I need to do.In the first tab, I have a list that includes duplicate rows (first column only). I want to remove those duplicate rows but I don't want to lose the data in the following columns which can be unique or duplicates as well.
see the desired result tab in the sheet to get an idea of what I am looking for as the end result.
Keep in mind that the actual source file I am working with could have up to 50000 row, and the expected results could be around 2000 rows. So nothing can be done manually.
I have cells (all in one column) containing text separated by commas e.g. (SD-299, SD-200, SD-300)
I am trying to transpose the text in these cells into rows.
VB:
Sub SplitAndTranspose()
Dim N() As String
N = Split(ActiveCell, ", ")
ActiveCell.Resize(UBound(N) + 1) = WorksheetFunction.Transpose(N)
End Sub
The problem with that is that when transposing it does not shift the cells down (/ insert new rows) so I lose the data already in the cells underneath.
Also, that macro would only apply to one cell I would like to be able to apply it all the data in the specific column on my Sheet.
I'm trying to create a .cvs file from an exported excel report, but before I can import it to a database I'd like to have one row per record.
I've already omitted out the headers and footers blank spaces and unnecessary columns from the excel file and I needed to just combine multiple rows into one.
It currently looks like this:
ROW#(1), ID#(1), NAME(1)
ADDRESS(1), ZIP(1)
DOB(1), SOURCE(1)
ITEM(1), CITY(1)
ROW#(2), ID#(2), NAME(2)
ADDRESS(2), ZIP(2)
DOB(2), SOURCE(2)
ITEM(2), CITY(2)
and so on..
I'd like to make it like
ROW#(1), ID#(1), NAME(1), ADDRESS(1), ZIP(1), DOB(1), SOURCE(1), ITEM(1), CITY(1)
ROW#(2), ID#(2), NAME(2), ADDRESS(2), ZIP(2), DOB(2), SOURCE(2), ITEM(2), CITY(2)
and so on...
I can't figure out a macro or a way to do this automatically.
I'm not great anyways with VBA Macro.Effectively, here is my issue. I have a spreadsheet which is really badly designed.In one column I have multiple numbers separated by a comma. I need this data separated into new individual rows, but at the same time, copying the data in the other columns in that row to the new row.
Example of what I have:
Test 1 54 email1
Test 2 32, 343, 63, 34 email2
Test 3 4934, 5342 email 3
What I need:
Test 1 54 email1
Test 2 32 email2
Test 2 343 email2
Test 2 63 email2
Test 2 34 email2
Test 3 4934 email3
Test 3 5342 email3
I have have the following code below which paste everything into a new column and into a new row, but the problem I have is that it does not push the other rows data down, nor does it copy the 1st rows data (for that data set) into the new rows created.
Code:
Option Explicit
Sub Macro1()
Dim fromCol As String
Dim toCol As String
Dim fromRow As String
Dim toRow As String
Dim inVal As String
Dim outVal As String
[Code] ........
The amount of rows I have, so this manually (text to column, then transcoding etc) it out of the questions (i have 1000 rows of this!)
I have an excel sheet that has the A column populated with many different things.
I'm not sure how possible it is, but I'm trying to group everything up by 7s and putting a space in between the groups.
So...
ABCDEFG1
ABCDEFG2
ABCDEFG3
ABCDEFG4
ABCDEFG5
ABCDEFG6
ABCDEFG7
HIJKLMNOP1
HIJKLMNOP2
HIJKLMNOP3
HIJKLMNOP4
HIJKLMNOP5
HIJKLMNOP6
HIJKLMNOP7
QRSTUV1
QRSTUV2
QRSTUV3
QRSTUV4
QRSTUV5
QRSTUV6
QRSTUV7
Would turn into
ABCDEFG1
ABCDEFG2
ABCDEFG3
ABCDEFG4
ABCDEFG5
ABCDEFG6
ABCDEFG7
HIJKLMNOP1
HIJKLMNOP2
HIJKLMNOP3
HIJKLMNOP4
HIJKLMNOP5
HIJKLMNOP6
HIJKLMNOP7
QRSTUV1
QRSTUV2
QRSTUV3
QRSTUV4
QRSTUV5
QRSTUV6
QRSTUV7
I'm essentially getting a lot of data at the moment, which has a few orders people have made on my website.
Essentially, think order id, address etc and then all the products the customer has ordered.
However, the part which includes what the customer has ordered creates multiple rows of data, with the order ids etc duplicated. What I need to do is consolidate this into 1 row. So to add additional columns instead of rows.
The reason fro this is I want to mail merge the data into an invoice and mail merges work of 1 line of data at a time. I've attached an example, any way to do this?
(Attached to this post / or linked here: [URL] ....)
I have a dropdown list with names of different people: Bob, Jane, Joe, et cetera. I also have tabs at the bottom (sheets) for each of these people. Is it possible that when a name is selected from the dropdown box in column D, say Bob, the whole row (row 10 or whatever) is cut from main sheet and put into Bob's sheet, then the row is deleted from main sheet? If this doesn't make sense (because I stink at making sense), just let me know and I will try to clarify
View 14 Replies View RelatedI'll try to be clear on what I need to do and hope I can find a solution.
I've found similar threads but I can not edit them for my use so I had to ask again. What I have is a lot of cows, calfs, heifers.
When a calf turns 12 months old , (ex: =IF(A3>11;move_row(sheet_heifers);"")), I need the entire row move to other sheet (heifers). and when the heifer gives births the first time (ex: column- =IF(A7<>"";move_row((sheet_cows);"" ) the entire row needs to move to other sheet (cows). I can do age calculating and the rest well.
I have a workbook called "Data"
In column "C" I have a part number
In column "F:H" I have a description
5432345 3445rt4 er4445ty ddews6789
4352345 sdwe33 dew345e jjkiii567899
1234566 qwert5 ertyu777 uiopl88888
1234566 eedrf44 yuikj776 ggggt44444
When I have a duplicate part number i want the second description to be populated in rows "I:K"
1234566 eedrf44 yuikj776 ggggt44444 eedrf44 yuikj776 ggggt44444
I have data as follows:
id | name
0 | axe
1 | sword
3 | pencil
4 | fist
5 | hammer
7 | gun
9 | rifle
Is it possible to move the rows to the row# shown in the ID?
- e.g. pencil gets moved from row#2 to row#3
I am trying to move row data into column data. Here is visually what I need.
Before:
After (one row of data only):
We are trying to import data into our accounting software but we can't until we get it into the right format.
I am trying to do work on a sheet and am getting very frustrated. I have a list of several different data entries that contain a row of information. I need to have the excel sheet move these rows to a different sheet in a specified location. For example, in the first column of the data I have the list of commodities, (sugar, cotton, yen, euro, and copper). Then in the second column I have the price and then the quantity. I want to move them automatically from sheet 1 (where they are entered) to a specific location on Sheet 2. I want Cotton to be in A2, Sugar to be in A20, Yen to be in A30, Euro to be in A40 and copper to be in A50. I would like the data to be cut from sheet one and inserted into sheet 2 so that the sheet can move them every day.
View 4 Replies View RelatedI have a workbook with over 500 rows and those rows are divided in diferent sections, to which I have left five empty rows to add more data, the problem is, how do I add four more rows once I have only one empty row of the five empty ones I had previous? There's also a formula on column H that I'd like to be copied down on to the newly added rows.
I don't know how I'm gonna deal with the rest of the other data that is gonna shift down as more rows are added, I said this because I want to be able to do the same on all the sections I have.
I'd like to write some code to do the following: When the first cell of the row contains an "Y", move the entire row to another sheet (in the same file), keeping in mind that this sheet already contains some rows (so add the row on the first empty row in the sheet). Afterwards the original sheet contains no longer any rows in which the first cell is filled with an "Y".
View 4 Replies View RelatedI have a massive data file with thousands of lines of data. Each line is a pair, for example
View 6 Replies View RelatedI have created a spreadsheet with 4820 rows of data (4821 for computational purposes, the last row being blank) with 5 columns.
1. every third row is blank and it needs to be removed (3, 6, 9,...4818, 4821). Once this is accomplished,
2. I need to move the data that is now found in the even rows, column E moved to the above, current odd row, column F. (ie. E2 to F1, E4 to F3, E6 to F5,...E4808 to F4807...,E4820 to F4819 (however it won't go this high). then
3. I need to delete all the current even rows, as the data I need will be in the odd rows.
I am running through some old accounting documents in excel 2003 (originally from SAP), that contain information in row form that I would like in Column form. Column E indicates to me whether this was an invoiced amount or payment amount or "other." I have limited VBA exposure, but am fairly proficient at what I do know. This is just too difficult for me!
Where the "Assignment" #'s are equal, I need the script/macro to move "up" YP's, YQ's,
See Original Layout.jpg
Then What I'd Like.jpg
Then End Result
I need to move a number of rows, based on user input
in front of the first column, continuously until it 'flattens out' into one row..
And then do the procedure again for the next row
Kinda hard to explain.. maybe i'll use an example
using this matrix :
