Inserting Userform Data Into Worksheet

Nov 23, 2007

I m trying to sort this out myself before posting but its driving me crazy! I have the following userform :-

I would like all that data entered into a worksheet called "Purchase Record" into the following cells:-

View 4 Replies


ADVERTISEMENT

Inserting Data Into A Cell With A Userform In The Same Format

Dec 27, 2009

I have a userform with 4 text boxes. One of the boxes you have to enter in an amount. i.e. Ł25.52 This value gets put into cell E17 in my spreadsheet. When I click the button and it puts it in, it puts it in the cell as "Ł25.52" with left alignment and does not apply it as the accounting style, as set to that cell. The same happens if I just type "25.52" instead.

I also have a formula applied so that if E18 is "Yes", E19 will display "Ł0.00" otherwise, E19 should display the value of E17. And then column E has a total at the bottom of the values in Column E. Even when "Ł25.52" or "25.52" is entered in, it comes up in cell E19 as 25.52 (not with accounting style) but it doesn't add up in the sum at the bottom of the column.

View 2 Replies View Related

Comparing And Inserting Data From Another Worksheet

Jul 10, 2014

I have two worksheets.

1 worksheet I have a value and I need next to it the result i take from other worksheet.

LETTERS
AMOUNT
A
Result
C
Result
G
Result

[Code]...

The list goes on.

So Pretty much I need to compare the value "LETTERS" on the first worksheet with the array of letters from second worksheet and insert in the field of the Result, the value next to the correct find in the array of letters ...

View 9 Replies View Related

Search Worksheet For Data In Multiple Textboxes On Userform - Display In Temp Worksheet

Dec 23, 2013

I have a workbook with 4 worksheet that store different type of data. It also has a userform that load at start of the application which is to search the data in the workbook. The userform has a combobox where the names of the sheets are stored. when the user selects say Sheet2 in the combobox, it enables the relevant textboxes on the userform and activates the worksheet at the change event. The userform has a search button that searches all the worksheets based on the text entered in a textbox.

The problem: how to search based on 1 textbox. What I want is: say for e.g the end-user selects sheet2 from the combobox, this intern enables 4 textboxes (Name, DOB, Nationality, ID #) on the userform. The end-user should have the liberty to enter data in 1 and/or any of the textboxes. The search should be performed, that if data is only in 1 of any of textboxes then give all rows that fit that criteria and display in a temp worksheet. if say the name and dob is filled by the user than what matches both should be displayed in a temp worksheet. if say dob, name and ID# given so the search button should narrow down to fit all 3 criteria and then display result in temp worksheet. As if mentioned data can be entered in either just 1 or any or all textboxes.

E.g. the worksheet is (Columns are Name, Nationality, DOB, ID#)

row 1 = name: Steven Martin, DOB: 27-may-1993, Nationality: Trinidad & Tobago, ID #: 1234567
row 2 = name: Gary Richards, DOB: 2-FEB-1993, Nationality: British, ID #: 456789
row 3 = name: David Cohen, DOB: 27-May 1993, Nationality: American, ID #: 98765
row 4 = name: Roberto McDonalds, DOB 21-Jul-1962, Nationality: British, ID # 654321
row 5= name: Gary Richards, DOB: 01-Dec-1978, Nationality: Australian, ID # 1234567

Now if the user enters only name as "Gary Richards" and search then row 2 and 5 should be displayed in a temp worksheet. if user enters name Roberto McDonald and ID# 1234567 then it should not display anything. if user enters DOB 27-may-1993 and nationality British and ID # 1234567 then as well shouldn't display anything and should a msgbox "no data found".

View 4 Replies View Related

Copy Worksheet Data In Userform To Worksheet?

Oct 24, 2011

I have embedded a worksheet called Rawdata" into a userform. Is has a number of text boxes on the userform, all the text boxes copy correctly to a worksheet called Rawdata, however i cant get the spreadsheet data to copy from the Userform to the sheet called Datapad.

The worksheet in the userform is from A1:G600, this data needs to be copied back to the Datapad worksheet B2:F601.

code so far:

Private Sub cmdadd_Click()
Dim iRow As Long
Dim ws As Worksheet

[Code]....

View 2 Replies View Related

Activation Of Userform Hide Worksheet And Closing Userform Activates Worksheet

May 14, 2014

I want activation of userform to hide worksheet, but as soon as the Userform is closed, the worksheet should show.

I have attached file to aid.

View 1 Replies View Related

Send Data From Userform To Worksheet AND Send Userform Fields In Email?

Jul 12, 2014

I have used a database template from this site and changed it to suit my needs but I have a bit of a problem with some of the code. I know how to update the worksheet with the relevant userform text fields and in another project I did I have successfully sent userform text fields in the body of an email.

For this project I want to update the worksheet AND send an email at the same time. However, using the two pieces of code together is causing an error that I can't seem to solve (using my very limited vba knowledge!). The code I am working on is below and I have highlighted the line that is getting the error message. C

VB:
Private Sub cmdSubmit_Click() 'Submit new record
Dim ws As Worksheet, lRow As Long, Str As String [code]....

View 1 Replies View Related

Getting Data From Userform To Worksheet

Jul 15, 2012

I have a Userform which has 3 'CONFIRM' buttons to pass the data from userform textbox 'ActDate1' (and 2 &3) to the worksheet 'Mod Schedule'.

In Column B from Row 7 onwards is a list of Names - one of these names will have been in the userform combobox 'SlctStu'.

I need vba such that when I click CONFIRM, on ActDate1, this value passes to:

The cell which is offset from the cell which has the matching name from combobox 'SlctStu' in the userform by the following formula:

((ModSend - 1) * 3) + 1

where ModSend is a variable set by my userform Me.Modsend.Value (a combobox).

So, for example, if the ModSend value is 3 and the name "Chuck Norris" is in the combobox 'SlctStu' in my UserForm, when I hit CONFIRM for ActDate1, I want ActDate 1 to go to the same row on sheet 'Mod Schedule' in column B from row 7 onwards where this name "Chuck Norris" also appears (a dynamic named range called 'StuModList' contains all the names that can appear here) and then offset across the worksheet by ((3 - 1) * 3) + 1 = 7 cells

View 2 Replies View Related

Add Data To Worksheet From UserForm

Nov 4, 2009

I am trying to create a User Form to make data input easer for the users.

At this point, I am having trouble figuring out how to “place the data”.

My workbook has categories in which data is organized. For instance A10 might say “Toyota” and B11 would be Corolla than all of row 11 will have data supporting the Corolla.

Same for the “Dodge” category, only it starts at A60 and B61 would be something like Challenger, etc.

I have a code to place the data in the first empty row but this doesn’t work very well for me.

{ iRow = ws. Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row}

I will have a drop down list of all the categories in the User Form which the user will select. From this is there a way to search for that category and then find the first empty row or insert a row within that category and then the rest of the data can follow?

View 9 Replies View Related

UserForm Data To Go To Next Row In Worksheet

Jan 17, 2008

In the code below, all I'm trying to do is get the next record from the userform to go to the next row in the worksheet and so on. I looked through some of the threads and even tried (as underlined) but I just can't seem to get it to work.

Private Sub TEST_Click()
Dim lRow As Long
Dim ws As Worksheet
Set ws = Worksheets("Sheet1")
'Prompt user before adding record
MsgBox "Are you sure you want to Add record?", vbOKOnly, Verify

'Add data to worksheet
ActiveCell. Offset(0, 0) = txtFruit.Value
ActiveCell.Offset(0, 1) = txtFruit_Number.Value
ActiveCell.Offset(0, 2) = txtFruit_Color.Value

'Clear userform
txtFruit.Value = vbNullString
txtFruit_Number.Value = vbNullString
txtFruit_Color.Value = vbNullString
txtFruit.SetFocus

' Find emtpy row
lRow = ws.Cells(Rows.Count, 2) _
.End(xlUp).Offset(1, 0).Row
End Sub

View 3 Replies View Related

Inserting Chart Into Userform

May 17, 2014

I'm trying to use the below code to insert a chart into a userfom, i'm using a tutorial that I've seen used on a few sites.

So far I found this code on the internet, the chart is the worksheet PMC

Set CurrentChart = Sheets("PMC").ChartObject("PMC").Chart
Fname = ThisWorkbook.Path & " emp.gif"
CurrentChart.Export Filename:=Fname, FilterName:="GIF"

Dashboard.Image1.Picture = LoadPicture(Fname)

Trying to load the chart into the image control image1 on the dashboard userform.

The debugger keeps hitting the chartobject section and grinding to a halt.

I have seen other ways of doign this but they require access to different libraries and work is restrictive with these things!

Also I have tried:

Set CurrentChart = Sheets("PMC").ChartObject(1).Chart
Fname = ThisWorkbook.Path & " emp.gif"
CurrentChart.Export Filename:=Fname, FilterName:="GIF"

Dashboard.Image1.Picture = LoadPicture(Fname)

Also the error message i get is: Unable to get the chart objects property of the chart class

View 2 Replies View Related

Add Data From Userform To Cells On Worksheet

Oct 29, 2011

I have a userform that has 1 combobox and 2 text boxes. i need the two text boxes to go to specific row and a specific column based on the entry placed in the combobox.

I can move data from a userform to a database if i am adding it to the next row, but here, there already is data and i want to add to existing data.

I tried application.match, to find the text in the combobox, but i can't seem to figure out the syntax to add it to column 13 on the same row.

View 5 Replies View Related

Capturing Data From Userform To Worksheet?

Aug 30, 2012

I have a macro that is starting to get pretty intensive and beyond my knowledge base. Currently is takes the needed data from sheet(1) and copies it to a newly created "Sheet2" in a specific format. Once the macro is done formatting "Sheet2", it shows both userforms for the next part of this macro.

One userform (UserForm1) is for inputting barcode data into rows on "Sheet2" (this is where I am running into problems). I cannot get the userform to capture the captions to the needed cells in "Sheet2".

The other userform (UserForm2) is for a visual representation of the error check. This will check for differences in Sheet2's column data. If a row's data in Sheet2 doesn't duplicate as expected it will flag RED and an image to show in the associated frame in UseForm2.

UserForm1:
Plate ID (PlateIDLabel goes to "PCR Plate ID" header column in Sheet2)
Plate Location (PlateLocationLabel goes to "PCRLocation" header column in Sheet2)

Currently the userform is coded to recognize prefixes for correct input into label textboxes.

Attached it the workbook with macro/userforms.

VB:
Option Explicit
Private Sub CommandButton1_Click()
Sheets.Add.Name = "Sheet2"
ActiveSheet.Move _

[Code]....

View 6 Replies View Related

Edit Worksheet Data Thru Userform

Jul 1, 2009

Depending on the attached workbook,

How can I edit the employee's Name and badge number thru a userform?

What should we depend on to save the employee's name before changing it, in order to use it as a find key?

View 14 Replies View Related

Read Worksheet Data Into Userform

Sep 10, 2009

I have setup a userform to record fuel issued to vehicles. I have a text box which I would like to use to display the last meter reading from my fuel pump. This data is stored in the last cell in column F of "Sheet1" workbook. Is it possible to read this data into my userform so when it starts it displays the last pump reading?

View 2 Replies View Related

Pass Data From Userform To Worksheet?

Dec 29, 2013

I have two userforms (for simplicity we'll call them UserForm1 and UserForm2). When pulling up data on UserForm1 and selecting CommandButton1 is Unloads the current form and passes the ComboBox1 on the form to a public variable called lSection_Choice. When CommandButton1 on UserForm2 is selected, it uses the public variable lSection_Choice to determine the ListObject on a worksheet and then locate the last row in the first column of the listobject and input the value of the TextBox1 on UserForm2. It runs through without any errors but the worksheets do not update? I am guessing it's because the modal UserForm2 is set and not focused on the worksheet.

Here is the code to pass the public variable

Code:
Private Sub AddTeam_Click()
lSection_Choice = Me.ComboBox1.Value
Unload Me

[Code]....

View 7 Replies View Related

Write Userform Data To Worksheet

Dec 1, 2009

I have two userforms. The 1st is called “add a facility” and the second is called “Edit Facility”.
The first userform works pretty well. It places all the data in the right columns in the first empty row at the end of the table. Then the “sort” procedure places the “new” facility data in the right category. Everything is good there. Here's the code.

Private Sub CmndInput_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("Facilities")

' find first empty row in database
iRow = ws. Cells(Rows.Count, 2).End(xlUp).Offset(1, 0).Row

'check for a Facility
If Trim(Me.TextFacility.Value) = "" Then
Me.TextFacility.SetFocus
MsgBox "Please enter a Facility"
Exit Sub
End If

'copy the data to the database
ws.Cells(iRow, 1).Value = Me.ListBox1.Value
ws.Cells(iRow, 5).Value = Me.TextFacility.Value
ws.Cells(iRow, 4).Value = Me.ListBox2.Value
ws.Cells(iRow, 6).Value = Me.TextType.Value
ws.Cells(iRow, 7).Value = Me.ListBox3.Value
ws.Cells(iRow, 12).Value = Me.TextConstneed.Value
ws.Cells(iRow, 16).Value = Me.TextPREAPP.Value
ws.Cells(iRow, 17).Value = Me.TextPreapsub.Value
ws.Cells(iRow, 3).Value = Me.TextDescription.Value
ws.Cells(iRow, 8).Value = Me.ListBox4.Value
ws.Cells(iRow, 9).Value = Me.ListBox5.Value
ws.Cells(iRow, 2).Value = Me.txtRefnum.Value
ws.Cells(iRow, 21).Value = Me.txtappdate.Value
ws.Cells(iRow, 24).Value = Me.ListBox6.Value
ws.Cells(iRow, 20).Value = Me.txtsubdate.Value
ws.Cells(iRow, 10).Value = Me.ListBox7.Value

' SORT Macro...

View 8 Replies View Related

Userform To Enter Data On Worksheet

Sep 14, 2006

I have sheet (say Sheet3) that is in essence a Database. I need to create a Userform to insert a row above the highlighted cell and insert the data on the Userform in that row.

Userform would have 3 textboxes to enter data, a submit button and a cancel button. (the 3 boxes titled Part, Price,Vendor)

In the Worksheet the 3 Columns are
A C E
Part Price Vendor

View 6 Replies View Related

Inserting Weekly Information With A Userform

Oct 4, 2008

I'm working on a sreadsheet for inserting and collating information for a fleet of vehicles. I have userforms for inserting various pieces of information when the vehicle is new or leaving the fleet.

I would like to use a userform for inserting weekly information. I know how to insert the basic information in columns but I'm stumped for working in rows and with inserting information at different times.

View 4 Replies View Related

Userform Inserting Values From Combobox

May 14, 2007

I'm running in to some problems on creating a Userform. I will try to explain it as best as possible. Right now I have a userform set up with 2 ComboBoxes. Here is my current code. It's not near complete.

Private Sub CommandButton1_Click()
Set ufStart = Worksheets("Data"). Range("AP4")
Set valNames = Worksheets("MasterData").Range("AA6")
Set valMonths = Worksheets("MasterData").Range("H3")
Set SelMonth = ComboBox2.ListIndex
Set SelName = ComboBox1.ListIndex
If TextBox1.Value > 0 Then
ufStart.Offset(SelName, SelMonth).Value = TextBox1
Else: End If
End Sub

The way it's supposed to go, is if TextBox1.Value is greater then 0... then go to UfStart and Offset by Row, which is ComboBox1 Selection Index Value and by Column, which is ComboBox2 Selection Index Value. I can't get the sub to get past Set SelMonth = ComboBox2.ListIndex.

View 6 Replies View Related

How To Show Data In UserForm ListBox From WorkSheet

Jan 30, 2014

I have a UserForm with two ComboBox's (name ComboBox1 and ComboBox2) and a ListBox (name ListBox1).

In UserFrom "ComboBox1" shows two options of months "January" and "February".
And ComboBox2 shows options "Advertising", "Bills", "Daily Expenses"

I have some Data on my Excel Sheet. I want to pull that Data and show it in UserForm according to their Month in which they are incurred. For Example If from Userform "January" month is selected and "Advertising" is selected then it should show data in the ListBox1 as follow.

1-Jan-14JanuaryAdvertising TV 100

5-Jan-14JanuaryAdvertising Newspaper 30

5-Feb-14JanuaryAdvertising Internet 30

I have attached UserForm and Excel Sheet.

View 8 Replies View Related

Transferring Compiled Data From Worksheet To Userform

Jan 26, 2012

Code:
Dim c_data As Worksheet
Dim usrfrm1 As UserForm
Set c_data = Workbooks(txtdbname2).Worksheets("CONTROL_1")

[Code]....

I have a userform in a workbook (part2.xls). Data from a second open workbook (defined as c_data) is tallied (countifs) and then dropped in the respective textboxes on the userform (cnthpdia, cnthfld, cnhpcrt). These textboxes have their visibility properties set to FALSE.

I need to turn them on to have the data displayed.

I am receiving a "Variable not defined." error in the line highlighted above.

View 3 Replies View Related

Edit Worksheet Data Table Via UserForm

May 28, 2009

I have a spreadsheet that summarizes variations on a project. On the "Variations" tab a userform pops up that asks the user to select from 3 options:

1. Create new variation
This launches another userform that allows the user to enter the necessary information and create a variation sheet. This userform updates "VarSummary" and also creates a new sheet for each variation created. I have been able to do all of this so far. The summary sheet "Variations" tab uses the data on the "VarSummary" tab. This is the code I used to add variation

Private Sub cmdadd_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("VarSummary")
With ws
iRow = . Cells(.Rows.Count, 2).End(xlUp).Offset(1, 0).Row
'Copy the data to the database
.Cells(iRow, 1).Value = Me.txtVarRecNo.Value
.Cells(iRow, 2).Value = Me.txtDate.Value
.Cells(iRow, 3).Value = Me.txtChg.Value
.Cells(iRow, 4).Value = Me.txtSrcRef.Value
.Cells(iRow, 5).Value = Me.cbstatus.Value
.Cells(iRow, 6).Value = Me.DirQty.Value
.Cells(iRow, 7).Value = Me.DirVal.Value............................

View 8 Replies View Related

Populate UserForm Controls With Worksheet Data

Sep 27, 2006

I have a userform that stores data (1 row record with 20 columns) to a worksheet.Is there a way to grab the data back in (other or the same)userform, ambent(correct) data and store them back in the same row in the worksheet?

View 2 Replies View Related

Filter Worksheet Data With UserForm Control

Sep 1, 2007

I have a database in Sheet1, and need to make a drop-down list for each column title, so that it would filter out the necessary letters or words. E.g. I type "au" and see the words starting "au" in one single list (like aura, aubergine, etc..)

View 5 Replies View Related

Inserting A Hard Return In A Textbox From A Userform

Aug 7, 2009

I have a userform that contains a textbox. How can I insert a "hard return" in the text portion to include a blank line between paragraphs?

View 2 Replies View Related

Excel 2007 :: Inserting Hyperlink From Userform

Dec 11, 2011

I am having difficulty writing code to insert a hyperlink from a command button on a userform.
I have set up a worksheet to be a data base for a lot of new files which are being created on a daily basis. The userform when activated asks the user to input certain information about the new file being stored in the data base (ie file name, date created, relevant project, description, who created it, etc). I have put a command button on the userform which I would like to activate the "Insert Hyperlink" menu so the user can then navigate to the location of the file being stored and have that hyperlink stored in a cell against the file when the "Submit" button is clicked on the userform.

I have read almost every thread on inserting hyperlinks with vba but none seem related to my needs. Using Windows 7 and Excel 2007

View 3 Replies View Related

Putting Data Collected In UserForm Back Into Worksheet

Apr 14, 2013

I'm trying to set up a relatively simple UserForm, which will collect the name of a project from a ListBox, a project update which will simply be text entered into a TextBox, and a estimated completion percentage (factor of 10, 10/20/30% and so on) which will come from another ListBox.

I've managed to get many of the basics working, for example an OK button and a CANCEL button, but there are a few bits that I'm still finding rather tricky.

I have the selected date in the percentage listbox going back into my chosen place in the spreadsheet quite happily, but I can't get it to work for the project name listbox (I think it's because the options come from rowsource and weren't entered manually like the other one). I'll paste my code at the end so you can all see how I've done it (and have a laugh)!

I have also just about managed to get the data to go to the right place in the spreadsheet. I want the data to appear in columns, column 1 for the project name, project update in 2 and percentage complete in 3. I have this working, but it for any reason one cell becomes blank, my code uses that cell, and that could cause entries to become mixed up. I want the UserForm to enter data on the first entirely empty row.

Here's my code:

VB:
Private Sub Cancel_Click()
Unload ProjectUpdate
End Sub

Private Sub Clear_Click()
Call UserForm_Initialize
End Sub

[Code] .....

View 7 Replies View Related

Save Data To Worksheet Dependent On Userform Dropdown

Jul 14, 2009

I'm a little out of my element(normally program PLC's). I have always been lucky on searching others programs and have been real successful at piecing them together to fit the application I needed. The current workbook I am working on for my supervisor will allow him to keep track of personnel's weekly job assignments. The workbook and userform work fine when just using one worksheet.

What i would like to be able to do is use the "assigned to" combobox be the indicator as to which worksheet the data is saved to. I have tried to do it several different ways but have been un-successful. Have spent the last two days reading and searching for a solution but have yet to find or understand one.

View 4 Replies View Related

VBA Code - Userform That Prints Data Entered Onto Worksheet

Apr 9, 2012

I am having some difficulties with my VBA code. It is a user form that prints the data entered on to a worksheet. However, I am having some troubles with the calculations I want it do. Here is code...

PHP Code:

Private Sub CommandButtonExit_Click()
Unload Me
End Sub

Private Sub CommandButtonClear_Click()
Dim ctl As Control

[Code] .......

I keep getting a run-time error.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved