Userform Inserting Values From Combobox
May 14, 2007
I'm running in to some problems on creating a Userform. I will try to explain it as best as possible. Right now I have a userform set up with 2 ComboBoxes. Here is my current code. It's not near complete.
Private Sub CommandButton1_Click()
Set ufStart = Worksheets("Data"). Range("AP4")
Set valNames = Worksheets("MasterData").Range("AA6")
Set valMonths = Worksheets("MasterData").Range("H3")
Set SelMonth = ComboBox2.ListIndex
Set SelName = ComboBox1.ListIndex
If TextBox1.Value > 0 Then
ufStart.Offset(SelName, SelMonth).Value = TextBox1
Else: End If
End Sub
The way it's supposed to go, is if TextBox1.Value is greater then 0... then go to UfStart and Offset by Row, which is ComboBox1 Selection Index Value and by Column, which is ComboBox2 Selection Index Value. I can't get the sub to get past Set SelMonth = ComboBox2.ListIndex.
View 6 Replies
ADVERTISEMENT
Oct 1, 2009
I have one userform that loads combobox values upon userform Initialize. Though through a second userform changes can be made to anotherworkbook this workbook is saves any changes. when i close the second userform i need to rerun the 1st userform Initialize event to update the combobox's incase changes have been made.
View 5 Replies
View Related
Jul 20, 2014
how can I build a userform to display all values from a row? in order to select a row, i was thinking to use a combobox to display values from one column and based on that selection, display all values in that row? the reason i want to use a userform is because i would also like to be able to edit that data.
View 3 Replies
View Related
Aug 15, 2008
I have created a User form with Combobox's, which in turn look up cell references in another sheet. In order to make maintainence of the combobox's as easy as possible I'd like the look up as many cells as possible, therefore anyone can easily add additional text to go into the user forms. However I don't want the blank spaces to show until something has been added.
View 9 Replies
View Related
Jul 26, 2012
I found this thread which deal with populating unique values in my listbox.
Here is the thread link. [URL] ........
What these line of code mean (the ones in red).
Code:
Private Sub UserForm_Initialize()
Dim v, e
With Sheets("maintenance").Range("c2:c500")
v = .Value
End With
With CreateObject("scripting.dictionary")
[Code] ......
Note : I simple tried to check the value of v by giving msgbox (v), just below the line v = .Value.
But I got run-time error 13 : Type mismatch error.
View 5 Replies
View Related
Sep 5, 2006
I have a userform with 15 Combo boxes & I would like to make sure all the enabled combo boxes (some may be disabled) have a value > 0 (Zero) before exiting the userform.
View 5 Replies
View Related
Jun 28, 2014
I have created a spreadsheet that is a roster to track mutliple crews and shifts.
I have a userform which is used to select a person on shift and assign them as being on either, Annual Leave, Personal Leave, Training.... on particular days.
I would like to have the shift combobox auto populate what shift the person is on based on the person and dates entered. All the information is there I just can't get the code to do this.
I was also thinking about blocks where the shift goes from DS to NS and if people are on leave over this time. I would need the combobox to know this also.
I have attached my workbook : New Annual Leave Spreadsheet.xlsm
View 9 Replies
View Related
Jan 15, 2014
Below is my current code. The strFind1 searches for a name within the database and then I need strFind2 to do a exact for a Subproject search and a partial search for everything containing the Subproject selected and other Subprojects. Currently, when the database entry in the worksheet includes Subproject 1 the search function works but when I have an entry that contains Subproject 1/Subproject 4 it does not find the entry. How can I expand the strFind2 to equal what is selected in the Combobox2 and find entries that have what is selected plus more text. I have set the line where I think everything is going wrong to a bold format.
[Code] .....
View 2 Replies
View Related
Dec 2, 2009
I have a userform with a combobox that has three items to choose from: Blue, Red, and Yellow. When a user selects one of those options, I would like another combobox to appear on my userform with a specific list for that option.
View 2 Replies
View Related
Apr 9, 2012
I'm trying to make a userform that has 2 combo boxes. I have just 3 columns right now.
Procedure GrpADA-QSI DescProcedure GrpAnesthesia And
Drugs9210-LOCAL ANESTH/NO SURGAnesthesia And DrugsAnesthesia And
Drugs9212-TRIGEM BLOCK ANESTHCrowns And BridgeAnesthesia And
Drugs9215-LOCAL ANESTHESIADenturesAnesthesia And
[Code] ........
I copied and pasted Column A into Column C and then removed duplicates. I named Column C 'ValList' and placed it in the RowSource for ComboBox1. What I now want is for ComboBox2 to populate based on my selection in ComboBox1. There are no duplicates in Column B. Duplicates are in Column A.
I also named Column A 'Proc_Grp' and Column B 'ADA_QSI_Desc'
For the properties in Combobox2, I left the RowSource empty. (that's correct right?) Because there's going to be a code that links Combobox2 to Combobox1... I think...
View 6 Replies
View Related
May 17, 2014
I'm trying to use the below code to insert a chart into a userfom, i'm using a tutorial that I've seen used on a few sites.
So far I found this code on the internet, the chart is the worksheet PMC
Set CurrentChart = Sheets("PMC").ChartObject("PMC").Chart
Fname = ThisWorkbook.Path & " emp.gif"
CurrentChart.Export Filename:=Fname, FilterName:="GIF"
Dashboard.Image1.Picture = LoadPicture(Fname)
Trying to load the chart into the image control image1 on the dashboard userform.
The debugger keeps hitting the chartobject section and grinding to a halt.
I have seen other ways of doign this but they require access to different libraries and work is restrictive with these things!
Also I have tried:
Set CurrentChart = Sheets("PMC").ChartObject(1).Chart
Fname = ThisWorkbook.Path & " emp.gif"
CurrentChart.Export Filename:=Fname, FilterName:="GIF"
Dashboard.Image1.Picture = LoadPicture(Fname)
Also the error message i get is: Unable to get the chart objects property of the chart class
View 2 Replies
View Related
Oct 4, 2008
I'm working on a sreadsheet for inserting and collating information for a fleet of vehicles. I have userforms for inserting various pieces of information when the vehicle is new or leaving the fleet.
I would like to use a userform for inserting weekly information. I know how to insert the basic information in columns but I'm stumped for working in rows and with inserting information at different times.
View 4 Replies
View Related
Nov 23, 2007
I m trying to sort this out myself before posting but its driving me crazy! I have the following userform :-
I would like all that data entered into a worksheet called "Purchase Record" into the following cells:-
View 4 Replies
View Related
Aug 7, 2009
I have a userform that contains a textbox. How can I insert a "hard return" in the text portion to include a blank line between paragraphs?
View 2 Replies
View Related
Dec 27, 2009
I have a userform with 4 text boxes. One of the boxes you have to enter in an amount. i.e. £25.52 This value gets put into cell E17 in my spreadsheet. When I click the button and it puts it in, it puts it in the cell as "£25.52" with left alignment and does not apply it as the accounting style, as set to that cell. The same happens if I just type "25.52" instead.
I also have a formula applied so that if E18 is "Yes", E19 will display "£0.00" otherwise, E19 should display the value of E17. And then column E has a total at the bottom of the values in Column E. Even when "£25.52" or "25.52" is entered in, it comes up in cell E19 as 25.52 (not with accounting style) but it doesn't add up in the sum at the bottom of the column.
View 2 Replies
View Related
Dec 11, 2011
I am having difficulty writing code to insert a hyperlink from a command button on a userform.
I have set up a worksheet to be a data base for a lot of new files which are being created on a daily basis. The userform when activated asks the user to input certain information about the new file being stored in the data base (ie file name, date created, relevant project, description, who created it, etc). I have put a command button on the userform which I would like to activate the "Insert Hyperlink" menu so the user can then navigate to the location of the file being stored and have that hyperlink stored in a cell against the file when the "Submit" button is clicked on the userform.
I have read almost every thread on inserting hyperlinks with vba but none seem related to my needs. Using Windows 7 and Excel 2007
View 3 Replies
View Related
Apr 8, 2007
is it possible to perform calculation such as sum,multiply value of 2 combobox and get it shown at 3rd combobox/label at userform initialize stage?
View 9 Replies
View Related
Feb 5, 2014
Is it possible that i fill the CB.list with range().value so the values are in Column 'A' and in Column 'C' and if i enter the field and select value then i see value from column 'A' & value in Column 'C'?
Then if i pick one value then the CB.value = the value from Column 'A' only, Can i solve it some how?
View 4 Replies
View Related
Feb 26, 2009
Carrying on from my calculation problem which now has been solved i am needing help with comboboxes
i have a combobox21 which i have made a dropdownlist ie Types of products from Product1 to Product 16 inclusive (i have sorted this)
i also have another 28 comboboxes, which of the 16 products i pick in combobox21 i need each of the other 28 comboboxes to display the the sub products
products and sub products are stored on sheet1 in the excel file as below
A B C D
1 Product1 Product2 Product3 Product4 etc .........
2 P1A P2A P3A P4A
3 P1AA P2AA P3AA P4AA
4 ETC ETC ETC ETC
So if i pick Product1 in Combobox21 then in each of the other comboboxes i need to be able to select P1A OR P1AA ETC .....
i have a named range of products A1 to O1 Called PRODUCTS
i will have to create 16 mores ranges for the items in each product but that is no problem
View 9 Replies
View Related
Jan 31, 2013
I have 2 combobox in userform. Both the comboboxes have the same list down value and I have applied as follows
VB:
combobox1.value = "Transport"
combobox1.value = "Paper"
combobox1.value = "Pencil"
Like this I have long list
In the combobox2 same list has been applied
Is there a way in which by one command the list is applicable to both the comboboxes, that would save me on the length of VBA.
View 4 Replies
View Related
Mar 14, 2014
I have a userform that I wish to be a front page for a work sheet containing personal staff information. I would like it to self populate according to a selection from a combo box (Surname). So far I am using the code below however where this code encounters those with the same surname it only displays the first row it comes across. Each row does have a staff ID number that is unique but I cannot search by this on its own as it would not be user friendly.
VB:
Private Sub ComboBox1_Change()
Dim r As Range
Set r = Sheet2.Range("A:A").Find(What:=ComboBox1.Text, lookat:=xlWhole, MatchCase:=False)
If Not r Is Nothing Then
[Code] .....
View 1 Replies
View Related
Mar 3, 2014
I need to base a combo box / TextBox on the result of the previous combo box.
1. The first combo box is a simple 2-option: "New" or "Exisiting" choice
2. If the answer is "New"; I need a TextBox to show which would allow the user to input a code
3. If the answer is "Existing"; I need a second combobox instead of the text box which will allow a selection of codes.
View 3 Replies
View Related
Oct 22, 2007
I want it to populate a combobox in a userform. Should it go in the code segment for the userform, in a module, or some other place? The following is code I originally found (by Leith Ross of this board) to find the last row in column "A", and load the combo box "ComboBox1"
View 3 Replies
View Related
Dec 5, 2008
I have a userform with a textbox and a combobox
textbox input will be a house number
combobox will be a list of all the street names that have that house number in my database
column Q are house numbers, column R are street names
when a user inputs a number into the textbox and tabs to the combobox,
for each cell in column Q of workbooks("proposals.xls").worksheets("database") that has the textbox1.value I want the cell value of .offset(0,1) to be added to the combobox.
View 10 Replies
View Related
Mar 22, 2009
I have more problem when work with three combobox, will you find me the code to solve this problem.
View 2 Replies
View Related
Jan 27, 2010
Basically I want it to look similar to the vehicle search on auto trader, or whatcar, where you first chose the make, then use a second combobox for the model (dependent on the choice made in the first combobx.
View 6 Replies
View Related
Jul 31, 2013
I am trying to add a list of items to a combo box which is in a user form using vba. Find the file as attached. My code is as follows: when i double click on the combo box it opens editor.( 4th item: Frequency )
Private Sub ComboBox1_Change()
With .ComboBox1
.AddItem "Y"
.AddItem "M"
.AddItem "D"
End With
End Sub
View 4 Replies
View Related
Nov 9, 2013
I have created a user form that needs dependent combo boxes. I have created multiple lists to use for different types of contacts and just want to use the if function to say that if combo box one's value is this, combo box two will use this list in its drop down box. This is what I have at the moment below.
cbosoi is combo box one and cboname is combo box 2. If I select Duty_manger from the first list I want it to point to the Duty_Manager list for combo box 2. It does that but it selects the duty manager list for anything I select in combo box one!
If cbosoi.Value = duty_manager Then
Me.cboname.List = Worksheets("lookuplists comms").Range("duty_manager").Value
End If
View 5 Replies
View Related
Apr 19, 2007
I'd like to say that this Forum is helping me very much when reading so many useful topics, get help from ppl here. From nothing I advanced my program very much. About my problem here:
I have an Excel Column with Dates (dd-mmmm-yy) and an UserForm/ComboBox. I'd like to add only the unique dates from the Excel Column to the ComboBox. The Excel Column Range is updating with new dates.
I tried to use RowSource but i don't know how to get the unique dates with RowSource. Maybe RowSource is not a good decision.
View 9 Replies
View Related
Aug 17, 2005
I am a total noob when it comes to userforms. I want to create a userform with a simple combobox that contains 4 different selections. Along with this combobox will be a Submit button and a Cancel button.
View 6 Replies
View Related
