The code below pulls information based on what i specify in a userform from another sheet.
I am trying to total the last 3 columns but for some reason the code sticks the sum formula right in middle of all my information. However, when i run the code (the exact same way) again then the code puts the sum underneath the last row as indicated in the code. How can i get the code to run right the first time around?
I have data from (row 1, column 1) to (row 53, column 5) on 283 consecutive worksheets in a singular excel file that I would like to be presented on a singular worksheet starting from the data on worksheet 1 and descending to the data on worksheet 283.
I am looking for a copy and paste loop solution that will copy the data from each page and sequentially paste the results on a singular output page in descending order (worksheet 1 data, worksheet 2 data... etc) so that I can sort the data.
Another interesting dilemma to solve. Using this formula:
View 2 Replies View RelatedI'm trying to make a script that will copy and paste a row in a table underneath the last row in that table when a button is clicked. I've simply recorded a macro to get things rolling, however whenever the macro does an insert to paste the data it goes above the last new entry which doesn't work for my purposes,
View 14 Replies View Relatedwhen I try to paste the next file underneath and look for the next blank row, this code doesn't seem to work.
Windows("Voice Pipeline.xlsm").Activate
erow = Sheet1.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
I want to bring some scattered rows in data range directly underneath the appropriate columns
Here is the description of manual way of doing the same task.
1. first, I check for last empty rows in column "M" i.e for country(By pressing CTRL + Down arrow key in column "M") and then i look into the immediate next empty rows where is the date values, usually i found it into next rows but in a different columns. so i copy the range one cell before from date values till last columns in that same row and i bring it back to the original row where it should be indeed.
For example after pressing CTRL+down arrow key in columns "M", If i see date values In next immediate rows "E7". I copied from "C7" or "B7" (one cell before date value cell) ,depending on In which cell the date value is sitting till last columns i.e "N7" and paste it manually to "D6". and I do repeat the same work manually till i aligned all rows to their proper place.
I am attaching my file also.
I'm inserting a function in a cell via code:
[Code] ........
The problem is that I want the second cell of the NETWORKDAYS function (in this case: R2C11) to be a variable cell. I want it to be cells(2, c - 3).
I'm using IF functions to get the difference of two cells. An example:
View 5 Replies View RelatedI have around 700 workbooks in a folder on my PC.
My master file(master database.xlsx) is kept open from which i have to Vlookup the values into these 700 workbooks.
The "agent Id" column is common in both the master database.xlsx as well as those other workbooks also.
The thing i want to do is i need the data from the "reporting supervisor" which is in the master database.xlsx file to be available in the G column of the other 700 books ( i have attached only 4 sample books). The G column can be then named as "Reporting Supervisor". Since "Agent ID" is available in both files we can vlookup taking this as a base. I have attached the 4 sample files out of 700 as well as the master database file in a zip file.
I have a piece of code that hides unneeded rows, it does work but it is very slow.
This is in the worksheet part of the project. My problem is as it runs it "jumps" in to a function I have in a module that counts continuous rows. I would like to know why it is doing this and what I need to do to stop it? I have another piece of code that is structered exactly the same that hides unneeded columns and I do not have any problems with that. I know both pieces of code are dealing with rows and I think this is part of the problem but I can not see any reason why the first bit would call the second bit?
Dim C
With Worksheets("CEN OAS"). Range("D5:D378")
.EntireRow.Hidden = False
End With
For Each C In Worksheets("CEN OAS").Range("D5:D378")
If C.Value = "" Then
C.EntireRow.Hidden = True
End If
Next C
Function to count used rows....................
I have a workbook that requires refreshed source data each day. The workbook has all of the macros and formulas that analyze the data. I have the following code to import the worksheet with the raw data (onto a fresh worksheet in the calculation workbook), but I would like to create code that also adds the date and time to the imported data worksheet -- not the date/time the raw data was created; instead, when it was imported into my calculation workbook.
Below is my code for importing the raw data worksheet:
[Code] .....
I would like to create a macro which I can use over and over again, with slight modifications.
I have included a sample worksheet with two (2) sheets. Sheet 1 is considered my 'master sheet' of which I want to add data to, if it exists. Sheet 2 is some additional data that may or may not be included. The common thread, between the two sheets is column A.
I would like to either add to sheet 1 or create a sheet 3 with the data, whatever is more effective.
In this 'sample' case, I would like to move the data on Sheet 2, column 'H' to Sheet 1, provided both column "A's" match. Again, if it makes more sense to combine the two on Sheet 3, no worries. However, the next time I do it the data may be in a different column so I hope to understand how to change the 'From' and 'To' columns. My rudimentary skills want to say If it exists, place it here. If not, move to the next entry.
The end result would be all the data on Sheet 1 (as it stands), joined with the data on Sheet 2 Column H, if Sheet 1 Col A = Sheet 2 Col A.
This would be a process that I would do over and over again as I populate Sheet 1 with the data I need.
i have a spread sheet that has a number of different addresses in them I need a vb code that will insert 5 rows between each row of data starting from row 42 and has the possiblity of running to the end of the rows 65536. i believe the best way to do it is via column B which will always have data in it. i have tried a number of methods but they all only insert the rows once or they do it the required ammount of times one after the other so i end up with a whole section of blank rows and all my data still together.
View 4 Replies View Relatedwhat i want to do is have an area where i can input data and then i have three options of inputing the data or resetting data that is already in the list of data so i start to create a list of data but i can reset/change values if i wish for example quantity. i would also like to have a way to subtract or add a number from the quantity assigned to a code/name of some form. i know that's quite a bit
View 3 Replies View RelatedI am trying to create an automated input of numbers which will only happen if text is present in a cell on the same line:
A
1Collumn 1 Column2
21 MR X
3(cell with formula: If text is present in column 2 insert (CellA2+1). Result is 3 being inserted in A3.
I have tried to combine a ISTEXT function with an IF function but to no avail.
I have two worksheets.
1 worksheet I have a value and I need next to it the result i take from other worksheet.
LETTERS
AMOUNT
A
Result
C
Result
G
Result
[Code]...
The list goes on.
So Pretty much I need to compare the value "LETTERS" on the first worksheet with the array of letters from second worksheet and insert in the field of the Result, the value next to the correct find in the array of letters ...
I'm using excel 2003 and was wondering if I could insert html around the cell data in a faster way than cutting and pasting it. Here is an example of a column and what I would like to do.
aaaa
bbbb
cccc
dddd
Now I would like every cell to have HTML around it to be easily posted on a website. I would like the cells to now look like this.
<a href="www.url.com/aaaa"><img src="www.url.com/aaaa.jpg"></a>
<a href="www.url.com/bbbb"><img src="www.url.com/bbbb.jpg"></a>
<a href="www.url.com/cccc"><img src="www.url.com/cccc.jpg"></a>
<a href="www.url.com/dddd"><img src="www.url.com/dddd.jpg"></a>
I haven't dealt much with functions so I don't even know if this is possible.
I have a column with lots of rows. I want to locate a specific one and insert some data into this row at specific columns. This is what i have come up with so far:
[Code] .....
I need a bit of VBA code which will run automatically when a csv file is opened. The code needs to move anything after column F onto the next row and repeat until there is no more data. The data is generated by an external program but is put on the same row (not sure why it does this). I have included an example of the csv file (the data in it is garbage so ignore it) for you to look at. the header row which needs inserting needs to be:
A1=Status
B1=Job No.
C1=Date
D1=Name
E1=Room
F1=Description
Hope this is enough information for you. bear in mind the amount of data being generated could be quite large. it has to be run automatically in order to be used in seamless mail merge.
What formula would I use to populate a cell?
Example
e13 = 0 until after the 10th of the month on the 11th it = $100.00
If I13 has an amount in it on or before the 10th e13 remains $0.
Each of the 12 line of this rent roll needs to correspond to its own month.
I've written the following code to insert rows at certain points depending on certain conditions, looping through to the last row. However, as the last row number keeps moving, due to inserting rows, I am not sure how to alter the code to allow for this.
Dim LastRow As Long
With ActiveSheet
LastRow = .Cells(.Rows.Count, "A").End(xlUp).Row
End With
[Code]......
Macro (preferably) to look up some data in a workbook and paste it into another.
I have an active workbook with this format
Sheet1 Â ABCDEF1RECORDER IDDate HOUR IN KW Â Â Â
21000560805917/11/201100:15:00150Â 31000560805917/11/
201100:30:00150Â 41000560805917/11/201100:45:00150Â 51000560805917/11/
201101:00:00150Â 61000560805917/11/201101:15:00150Â 71000560805917/11/
201101:30:00150Â 81000560805917/11/201101:45:00150Â 91000560805917/11/201102:00:00150
I have another workbook opened called "Carbon intensity" with this format
CO2_Intensity_01082011_29032012 Â AB1Timeg CO201/08/2011 00:15466301/08/2011 00:30461401/08/2011
00:45460501/08/2011 01:00462601/08/2011 01:15463701/08/2011 01:30463801/08/2011 01:45466901/08/2011
02:004671001/08/2011 02:15472
I would like to insert the values in Column B in the "Carbon Intensity" workbook into Column F in the active workbook corresponding to the dates and times.
This is an example of what it would look like afterwards
Sheet1 Â ABCDEF1RECORDER IDDate HOUR IN KW Â Â Â
21000560805917/11/201100:15:0015046631000560805917/11/201100:30:0015046141000560805917/11/
201100:45:0015046051000560805917/11/201101:00:0015046261000560805917/11/201101:15:0015046371000560805917/11/
201101:30:0015046381000560805917/11/201101:45:0015046691000560805917/11/
201102:00:00150467101000560805917/11/201102:15:00150472
I'd like to insert the value of a cell in Excel worksheet A into the cell of another Excel workbook B. The twist is that the Worksheet A begins as a templated file and is copied into new jobs each time. The destination spreadsheet B location and name stays the same but the source file changes location. So the destination file B can't be looking to be updated. What needs to happen is that once the source spreadsheet A is copied into a new job, whenever the spreadsheet is updated and closed, it needs to "export" the new value into the source file B. Not the other way around as the destination file will not know the location of this new source file. Sorry for the confusing syntax but hope this is clear enough for an answer. Here's an example of the question: How do I automatically, on closing this source workbook A, update cell D24 into file C:MyFilesExcelFormerFile.xls Sheet1 cell B27?
View 2 Replies View RelatedI m trying to sort this out myself before posting but its driving me crazy! I have the following userform :-
I would like all that data entered into a worksheet called "Purchase Record" into the following cells:-
Insert a drop down list that is attached to a bunch of data to make it easier to navigate through the data.
Therefore, when you chose one item in the list it will populate data in the worksheet for that item in the list and change for each item in the list.
For example, if you have ten people's names in the list when you pick Nancy it will show you information on her and when you pick Scott it will populate with completely different data. The data all coming from one master tab.
I have a userform with 4 text boxes. One of the boxes you have to enter in an amount. i.e. £25.52 This value gets put into cell E17 in my spreadsheet. When I click the button and it puts it in, it puts it in the cell as "£25.52" with left alignment and does not apply it as the accounting style, as set to that cell. The same happens if I just type "25.52" instead.
I also have a formula applied so that if E18 is "Yes", E19 will display "£0.00" otherwise, E19 should display the value of E17. And then column E has a total at the bottom of the values in Column E. Even when "£25.52" or "25.52" is entered in, it comes up in cell E19 as 25.52 (not with accounting style) but it doesn't add up in the sum at the bottom of the column.
I would like to know how can i insert a blank row in between ACC# when ever a new series of data begins
name Acc # Balance Date
John 2222 200 june 2013
John 2222 344 june 2013
John 2222 700 Sept 2013
Silva 4444 333 June 2013
Silva 4444 333 June 2013
Silva 4444 333 June 2013
Raff 5555 897 June 2015
Raff 5555 897 June 2015
Raff 5555 897 June 2015
Raff 5555 897 June 2015
I have the following sheet with reg hours and ot hours. I need to insert a column that sums these two items. I used the macro recorder and it only works when the same amount of ID's or less. If there are more ID's it does not sum the remaining ID's. What it currently looks like:.........
View 3 Replies View RelatedI need to get data from an excel spreadsheet copied and into the body of an email.
I have set it up to copy the data required, i have the email open, i have the to and subject fields filled in but i can not get the copied data inserted into the email.
Where am i going wrong or better yet what do i need to write to get this to work.
Dim objOutlook As Object
Dim objOutlookMsg As Object
Dim msgtxt As String
Sub send()
msgtxt = Sheets("bed update report").Select
Application.Goto Reference:="Print_Area"
Selection.Copy
Set objOutlook = GetObject("", "Outlook.Application")
Set objOutlookMsg = objOutlook.CreateItem(o)
'Set objOutlookMsg = objsession.CreateItem(olMailItem)
objOutlookMsg.display
With objOutlookMsg
.To = "someone@somewhere.co.uk"
.Subject = "Despatch Overtime Hours"
.body = msgtxt
.send
End With
Set objOutlookMsg = Nothing
Set objOutlook = Nothing
End Sub
I've got data output (~500 rows) that's going into a larger, formatted sheet. The data going into the sheet is about 8 columns of material and the formatted sheet has over 20 columns (the rest to be filled out by the engineers). I'm tacking the new information to the bottom of the sheet (in the corresponding, non-consecutive columns), but the question now is how to format it.
Each location has recommendations, about 1-5 rows. What I want to do is insert a row after each different entry (probably by location address) so it will be more visually accessible (this is the format of the sheet).