Integrate Two Reports To Show Missing Entries?

Nov 30, 2011

I have two spreadsheets, on that gets generated everyday which is a "fuel transaction report" and another with "captured fuel"

I was wondering if its possible to somehow intergrate it so that it will automatically show me if the "fuel transactions" have entries that does not reflect on the "captured fuel"

This is the fuel transactions report

Unitrans Fuel Transactions Repo  BCDEFGHIJKLMNOPRS21REGISTRATION : BH83MGGP   VEHICLE DESCRIPTION : HINO 500 1626 LWB F/C C/C     2226/11/2011NESERHOF MOTORSMISMATCH MISMATCH11980DIESEL100.021 009.152324/11/2011NESERHOF

[Code].....

See, I need to cross check the two reports to see if there is any missing fuel from the statement report from the supplier to what is getting captured by my people.

View 3 Replies


ADVERTISEMENT

Find Missing Entries For Given Date?

Mar 12, 2013

How I can go about finding missing entries. I have an excel sheet that has column A as employee name and column E with a date. There are 10 employees so there should be 10 entries for each date. I need to be able to determine which employee hasnt entered information for a given date.

View 1 Replies View Related

Check For Missing Entries Before Saving

Aug 22, 2007

How can I make this code repeat itself on different lines?

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
If Sheets("Sheet1"). Range("A10").Value > "" And Sheets("Sheet1").Range("B10").Value = "" Then
MsgBox "Please Enter Order Number in Line 10"
Cancel = True 'cancels the save event

End If

End Sub

The code works perfectly for that one line but I need it to repeat independantly in the same columns but for rows 11 up to and including 23.

If I need to make the message generic like " Please Enter Order Number" then that's fine.

View 4 Replies View Related

Conditional Format Table Row If Entries Missing

Feb 26, 2008

Please find the attached sheet.

I just want to know whether is it possible to condional format multiple cells based on multiple cell values.

Eg: In the attached sheet,when a driver is standby and the vehicle no column should be empty,if accidently a data entry is done in vehicle no column it should highlight the whole area (ie,from A3 to E3).

View 8 Replies View Related

Summary / Reports (Multiple Columns Calculation Into Different Reports)

Feb 17, 2014

I have an expense workbook (Data) with 4 columns (ID, Item, Cost, Date). I would like to create macros that will generate 3 different reports and write to 3 different worksheets.

The first report is sorted and sum up the cost for each item. Please see the worksheet "Item".

The second report is sorted and sum up the cost for each part ID. Please see the worksheet "ID".

The third report is the cost for each month and Year-to-Date cost right next to it. Please see worksheet "Summary".

write the macros for each of these reports assuming that we don't know the number of rows in the "Data" worksheet.

View 4 Replies View Related

How To Show Numbers Missing And Listed

Nov 17, 2013

The current method I'm using to get the results I need in Excel are a bit manual and excessive. is a simple all in one formula for what I'm trying to do,

The data is 3 rows. We can also assume the data is in the first three columns starting from A1.

698
885
499

As you can see in the above set from 0 through 9, the numbers that are not listed are 0,1,2,3,7
And As you can see the numbers that are listed are 4,5,6,8,9.

How do I find and show which numbers from 0 - 9 are not in the set.
How do I show the number that are listed in the set Example:
Note: the special characters aren't needed.

698 4,5,6,8,9 --- 0,1,2,3,7
885
499

Note the the evaluation is for every three rows. So the three rows in the example are from a table with 150 rows. Each row begins a new evaluation for the next three.....Example:

698 and the following two starts the next set
885 and the following two starts the next set
499 and the following two starts the next set
and so on ......

View 6 Replies View Related

Show Missing Values From Ordered List

Dec 26, 2007

I have a list of 9 values ranging from 1 to 9 generated by formulas in column A. they can only be "1,2,3,4,5,6,7,8, or 9" and can be repetitive. Is there a formula i can use (not macro please) that will show me what values are missing from the list?

Example

A B
1
4
5
1
2
1
8
7
1

*Note there are 9 values in column A in any order. In this scenario the answer i would like shown is "3,6,9".

View 4 Replies View Related

Show Date/time Between Entries

Oct 11, 2008

Basically each line signifies a date & time that a deposit was placed and a date & time that a withdrawal was actioned. My goal is to be able to determine what kind of average response time we have between the time a withdrawal was requested and the time a withdrawal was actioned.

View 2 Replies View Related

How Do I Show Multiple Entries One Time

Aug 17, 2007

I have an excel spreadsheet that has about 40,000 rows....and about 30 columns across. The two columns I'm writing this about is column "PO#" and column titled "VALUE". The PO# column will have a number such as 4500234567...and the value column will have the cost of the PO#, for example $5,000.

Now within the the spreadsheet the PO# number and value will be listed multiple times....and there are hundreds of PO#'s listed, with its value.

I would like to perform some kind of filter on a seperate worksheet (? or whatever i needed) that would show the PO# number and value once.

View 9 Replies View Related

Removing Blank Entries That Show As Zero

Aug 2, 2006

I have a workbook containing several worksheets. I use one worksheet to collate information from the others. I do this by referencing the relevant cells I need from the other worksheets with the '=' command.

When this displays it shows as a '0' if the original cell is blank. Is it possible for this to show as a blank unless there is any data. I have tried the ISERROR function but it still leaves the entry as a '0'.

View 4 Replies View Related

Integrate Two Sheets

Oct 11, 2009

In Sheet1 I have the following horizontal fields:

Cust#
Order#
Order Qty#
Item#

In sheet2 I have the following horizontal fields:
Cust#
CustAddress
CustCity
CustState
CustZip

How can I automatically add the address fields from sheet2 to the appropriate line in sheet one with the matching cust#?

View 11 Replies View Related

Show The Time Difference Between Two Data Entries

Dec 4, 2009

I have data entry in a spreadsheet which shows minutes, seconds and thousandths of a second - example looks as follows:
12:48:589 or 04:21:998. I would like to be able show the time difference between two data entries, so for example:

09:57:145 and 08:12:055 would give a difference of 1:45:090
12:07:985 and 18:59:788 would give a difference of 6:51:803

To be honest, I even struggled to work out the values on paper. Is this even possible? If so, can you let me know the number format I should be using as well as the formula or even better, post an excel sheet with the example.

View 3 Replies View Related

If Statement Only Show For Entries That Have 13 In The Weeks Column

Oct 2, 2006

i am trying to amend my if statement in the 6 WEEK COLUMN to only show for entries that have 13 in the weeks column, I want the entries that show 2 or 26 to come up with a blank result. I have attached an extract for your information.

View 4 Replies View Related

How To Integrate Data From Different Sheets

Feb 19, 2014

I have to combine the data from different sheets in a file. I'm attaching a mini version of the file for demonstration. As you can see, there are 6 sheets in the file-a sheet for a different variable. In each sheet, there are around 150 countries in columns and monthly data for that particular variable in rows. I have only put data for few months, but in actual file it has many rows. What I need is data for around 30 countries where in each country I have monthly data for these 6 variables under one roof. I have put one example in last sheet -Sheet1- for one country to demonstrate how i need the data arranged.

View 8 Replies View Related

How Can I Integrate Two Tables In Sumproduct

May 30, 2007

I have two matrices:

table 1: A B

and

table 2: D E

I need to summarize A where B could be found in D, when E is "alpha".

In SQL this will be like:

SELECT * from table_1 WHERE A=1 AND
(SELECT * FROM table_2 WHERE D=B and E="alpha") IN NOT NULL

View 9 Replies View Related

How To Show All Entries That Meet A Certain Criteria In A Seperate Worksheet

Jan 7, 2010

I have been working with personal record data in multiple workbooks, using sumif, index, vlookup etc to show various required info.

What I now need to do is take all the records of people aged between 16-18 and list this in a new worksheet.

I can get all the records I need in a pivot table but it needs to be something I can add columns to in order to gather further info.

View 7 Replies View Related

Mscal.ocx Integrate Popup Calender

Feb 23, 2005

Some people throughout our company were having problems using the excel form I created which contains a popup calender. Even with the mscal.ocx installed some people were having issues.

I found a popup calender that can be integrated into the form, and doesn't rely on the mscal.ocx. I put this into the form (that MANY people here helped create), and now all of the people that use the form no longer have any issues.

View 9 Replies View Related

Integrate To Some Extent With The Outlook Tasks Function

Aug 28, 2008

it seems to be possible to integrate to some extent with the Outlook Tasks function....

Is it possible however to 'update' a given task, and have it linked somehow to my workbook project? (Maybe using some sort of reference?)

View 9 Replies View Related

Show Missing Values In Pivot Chart (line Chart) Axis?

Apr 18, 2013

How can I add missing values to the axis in a pivot chart line chart? I have a numerical X-axis with values such as 0,1,5,8,14, etc. I have another set of Y values that correspond to the X values. If this was an XY-scatter plot I'd be able to plot X vs. Y and connect the dots for "gaps" in the X values. Since it's a pivot chart I cannot use an XY-scatter plot, I can only use a line chart. The line chart doesn't give me the ability to add the "missing" values, so it gives the impression that my data is more closely packed than it is. The data source is external to my spreadsheet, so I cannot add the values before creating the pivot table/chart.

View 1 Replies View Related

Excel 2007 :: How To Get Dropdown Box Results To Show Unique Values And Non-Blank Entries

Sep 27, 2012

I am using a ComboBox in Excel 2007 in a UserForm. It is drawing on a row source which populates empty cells duplicates. How do I get the drop down box results to only show unique values and nonblank entries?

View 4 Replies View Related

Dependent Dropdown List - 3 Levels - Remove Common Entries From Selection - Show Relevant

Dec 4, 2013

I have scoured the net for the following and have not been able to find a solution. I have found variations but not something specific for the use needed here.

I have attached a file with sample data which has the following format.

Column 1 = vehicle model (in this example golf, jetta, but there will be over 100 choices)

Column 2 = vehicle package option for specified vehicle model (automatic transmission, manual transmission, automatic transmission with air conditioning, etc...)

Column 3 = vehicle colour available for vehicle package option

Please note that Column 2 values for 'golf' are different than values available for 'jetta' (in the sample data I have blocked out common values with the same colour for quick and easy identification)

Also please note that Column 3 values of colour options vary for each 'vehicle package option'.

The behaviour that would be ideal is to have 3 drop down menus. The first drop down menu will allow selection from column 1 and will show each model only one time and repeated values will not be shown. The second drop down menu will only show the options available based on the selection in the first drop down menu. Likewise, the third drop down menu will show the colour options available based on the selection in the second drop down menu.

Since my data will involve hundreds of unique values in column 1 with plenty more added over time, it seems that the format of the data and the way it is laid out in the attached sample is the easiest way to organize it. It is perhaps also the easiest way to include new data without a lot of reprogramming.

Sample Data - Dependent Drop Down Cells Question.xlsx

View 8 Replies View Related

Compare Two Columns, If Missing Insert Missing Data

Jul 8, 2008

I have two columns which i want to compare, they contain text data such as A123.

what I'd like is if its in column A and not in Column B then add to bottom of column A.

Once its in column A i can do the vlookup's to draw the other data, costs etc, over but don't know how to identify, and add, the missing codes to the list.

View 9 Replies View Related

Comparing 2 Reports

May 26, 2007

Files :- [url]

i have upload 2 worksheets (in a zip file)

i have attached my 2 files,

1 is report of Feb 2007 & other is March 2007

on 1 Branch,

i got 200 Branches reports & i have to compare the people recored and have to identify following things

1) in which Days bukket is fall in Previous report ( compare with current)
2) if the Account # doesnot match then it should be HIGHLighted!

what i have to do is to compare the Account # with Previous & add a New Column & write the previous days (in number) plus highlight or show some remards that doesnot exisits in last report,

View 11 Replies View Related

Creating Reports

May 14, 2008

I am trying to create a report that takes two user inputs and looks them up on another worksheet in the workbook and returns the right value. As an example I have the user input a date and a job location and on another sheet there is also a date and a job location that has a population associated with it. Is there a way to return this information so that it changes whenever the user changes these two criteria

View 9 Replies View Related

Filtered Reports

Nov 13, 2008

I'd like to created a 'Filtered Report' in which data changes based on my selection. For example, in this scenario I have 2 columns, 'Part Type'(you may pick Part1, Part2, Part3) and the 'Results' columns. I have displayed 100 entries(which means at this point they're all displayed, no filters).

When I apply the filter, and I choose Part Type to display Part1 and its "Results', I would like to dynamically be able to display somewhere in that Sheet something like this:

Part Type: Part1
Total: This would be a =sum(of the 2 cells below, in this case it'd be 17)
Pass: 14
Fail: 3

But I'm not sure how to dynamically count it based on what I've filtered, so when I change to Part2, it would give me:

Part Type: Part2
Total: This would be another =sum of the 2 cells below
Pass: 25
Fail: 4

View 9 Replies View Related

Crystal Reports

Apr 18, 2006

I use excel pivot tables a lot for most of my information gathering for reports that I produce. Problem I keep running into is the 64k row limit. I work with up to 200K rows of excel data at a time and just need to pick out a summary of certain columns. I have read (mostly adverts) good things about crystal reports and have been considering giving it a try. It will be a steep learning curve for me, but I was wondering have this group any views on the program before I splash out on books, DVD courses etc.

View 6 Replies View Related

Compare Two Reports

Jul 2, 2007

I have an Excel Spreadsheet WorkSheet Analysis Work there are two reports side by side. A) Source of Truth & B) Analysis Studio.
What i'm trying to do is find out if Analysis Studio Matches off with the Source of Truth.
The columns in Analysis Studio being Column M & Column N have to match the Source of Truth Columns E "Cil account" & Column I "Code Name". Now the problem is that the names in Analysis studio Column M Example Cash is Different to the Source of Truth Coloumn I Example Cash Assets. This is what I would match as Yes being the Same as it is. The other Problem is Analysis Studio Column N has the Account & Name in one cell whilst the Source of Truth has both these in separate Columns. I’m happy if it can just match off Column E being the account to the Analysis Studio Column N. Ideally would love the results to fall either go in Column O being YES it matches or Column P it does not match the Source of Truth.

View 5 Replies View Related

% Calculation For Outstanding Reports?

Dec 3, 2013

calculating the percentage for outstanding reports.

My employees have 30 days to complete a report so if they complete the report within 30 days it is 100%

Each day the report is outstanding the % is reduced i.e. 32 days = 98%

I also have dates set-up to give me the actual # of days the report is outstanding i.e. (date received by me) - (date of the meeting) 12/1/13 - 11/30/13= 30, but the % is not working well

What I have tried for the % is

number of days outstanding /100 * 30 (number of days per month)

91/100*30

The % is needed for yearly evaluations

View 5 Replies View Related

Formatting: Save And Use For Other Reports

May 16, 2008

Every week I run the same report for different projects to show financials and such.

Each project will have a different number of rows based on how large they are or the scope or a combination.

The number of columns is always the same as well as the basic headings.

The system that provides the output creates a bland (well, ugly) report. Not the type of thing you want to distribute.

I'd like to create a report format that I can quickly and easily cut and paste (or use another functionality) to use on these reports. Yes, I can cut and paste the formatting from the "Master" report's format but it's not easy to do as I have to keep highlighting each report's data range before pasting. I'd like have my OWN template under autoformat.

View 10 Replies View Related

Create Reports From Workbooks

Oct 21, 2009

I do testing of industrial equipment, collecting a lot of data along the way. Once I've calculated the performance metrics of existing systems, I do a cost analysis on proposed repairs or replacements.

I have a couple of goals in trying to streamline my spreadsheet process and make it more effective.

My worksheets usually end up with way more columns than I can view on the screen and that gets pretty cumbersome, so I want to develop input forms that will make data entry simpler. I've tried transposing the formats but they get even more difficult to handle that way. I just ran across the "Build a UserForm for Excel" pdf in this forum and I think that's going to help quite a bit.

Then for each of these types of projects I need to develop at least two report formats, one that will be comprehensive for each individual piece of equipment or subsystem that I'm analyzing, and another that's more of a summary of entire systems, such as a network of pumps all owned by the same customer. Ideally, this summary report would allow me to rank the subsystems by various criteria, such best ROI or most critical to operations. Format-wise what I'm looking for here is to strip away anything not relevant to decision makers, just reporting the important ID info and key results.

Finally, I'd like to be able to store all similar jobs in a single database so I can easily search through past results for comparative purposes when doing higher level analysis on new projects. I keep seeing the term "relational database" bandied about but don't really know if that's what I'm talking about or not.

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved