I have data entry in a spreadsheet which shows minutes, seconds and thousandths of a second - example looks as follows:
12:48:589 or 04:21:998. I would like to be able show the time difference between two data entries, so for example:
09:57:145 and 08:12:055 would give a difference of 1:45:090
12:07:985 and 18:59:788 would give a difference of 6:51:803
To be honest, I even struggled to work out the values on paper. Is this even possible? If so, can you let me know the number format I should be using as well as the formula or even better, post an excel sheet with the example.
I'm trying to find an easy method of recording the available hours of operation for an airfield which can close a couple of times a day due to weather.
I have 2 cells in which time is given in format hh:mm:ss , I have differentiated both whatever difference is their between them it get showed in different cell , but my cell is not showing exact time difference its showing up as ######.
Basically each line signifies a date & time that a deposit was placed and a date & time that a withdrawal was actioned. My goal is to be able to determine what kind of average response time we have between the time a withdrawal was requested and the time a withdrawal was actioned.
I have an excel spreadsheet that has about 40,000 rows....and about 30 columns across. The two columns I'm writing this about is column "PO#" and column titled "VALUE". The PO# column will have a number such as 4500234567...and the value column will have the cost of the PO#, for example $5,000.
Now within the the spreadsheet the PO# number and value will be listed multiple times....and there are hundreds of PO#'s listed, with its value.
I would like to perform some kind of filter on a seperate worksheet (? or whatever i needed) that would show the PO# number and value once.
I'm interested in comparing the 2 columns of data as attached in the SampleData file, for eg. First customer bought 5 items and customer 2 bought 3 items. I'd like to show the difference which customer 1 bought and customer 2 did not buy. Will need to use that via VBA And also for loop if possible!
how to create a macro of some sort that will look at a list of data in cloumn A and in Column B then tell me the values of data that is in A but not in B then also tell what is in B that isnt in A. I understand that 2 vlookups will prob do this but i would like it more user friendly so the way i would like it...........
is for me to paste a list of data from 1st source to column A then, a list of data from 2nd source to column B
then click a button that would do a lookup from column A against B (and B against A)
and return the values on sheet 2
that way... users could look on sheet 2 and anything in column A would be data that was in column A in sheet 1 but not in B and the data in cloumn B (sheet 2) would be the data that was in column B on sheet 1 but not in A.
if the cells in column E AND column F are blank, then column G will be blank also (I dont want 0 showing), if not show me the difference between col F and col G.
I put in the following:-
=IF((E2="")AND(F2=""),"",E2-F2)
However, Excel informs me this is wrong and corrected it as
=IF((E2="")*AND(F2=""),"",E2-F2)
I guess my question is why do I need to put in "*" for this to work?
I have to calculate the difference between the start time and end time of a job. The only catch is, how can I avoid calculating "out of hours" time. So, if a job goes from 9am to 9am the next day, I want it to avoid calculating between the hours of 23:30 and 03:30.
Another example is if a job goes from 02:00 to 04:00, I want it to avoid the tim between 02:00 and 03:00.
If there is a difference in days, so the job goes overnight, how do I take that into consideration also.
I've got a time difference from 8:00AM - 12:30PM as 4.30 I'm trying to get the minutes, .30, converted into a 6 minute increment, .5. Is it possible to do this and if so how would it be done? Below is a chart of how the time is converted from 6 minutes increments into decimal form.
i want to ask for a reason if a item is late where M & line is the time it should have left and N & line is the actual time it left.
TL is the difrence between the two times i want the input box to read " DRIVER DISPATCHED 30 MINUTES LATE PLEASE ENTER REASON" but it returns "DRIVER DISPATCHED -.11233543 E2 MINUTES LATE" how do i format this to show the difrence in minutes
TL = Range("N" & Line) - Range("M" & Line) late = InputBox("DRIVER DISPATCHED " & TL & " MINUTES LATE PLEASE ENTER REASON")
I'm looking at trying to view 1 large keyword phrase list of about 40,000 phrases to another large list.
All I want is a macro, I can assign a button to. Click it and in a new sheet it shows only the rows of data that are different.
I have tried googling it.
I found 1 that looked very good (Not that I really know anything about coding, but I couldnt get it to work.
I'm using excel 2007. As a note the link was here. [url]
I might as well post the code,, but I just couldn't get it to work, shame, because it sounds like it could be what I was after, I'll post it now, but if anyone can help me with this that would be great
Sub CompareWorksheetRanges(rng1 As Range, rng2 As Range) Dim r As Long, c As Integer Dim lr1 As Long, lr2 As Long, lc1 As Integer, lc2 As Integer Dim maxR As Long, maxC As Integer, cf1 As String, cf2 As String Dim rptWB As Workbook, DiffCount As Long If rng1 Is Nothing Or rng2 Is Nothing Then Exit Sub If rng1.Areas.Count > 1 Or rng2.Areas.Count > 1 Then MsgBox "Can't compare multiple selections!", _ vbExclamation, "Compare Worksheet Ranges" Exit Sub
I have a spreadsheet which has a number of columns populated with a day number and below each day number there are some numbers. What I would like to do is to compare the values for Day1 with Day2, Day 2 with Day 3 etc. Is there a smart way to do this using VBA? I am enclosing an example to show what I would like the macro to do.
I have two sheets. In the first sheet, I have cell F4 is 00:00:00 (countdown). G9, G10 and G11 are cells that receive data (decimal numbers) live. In the second sheet, I have three cells linked from shhet1 G9 ='Sheet1'!G9, G10 ='Sheet1'!G10, G11 ='Sheet1'!G11 (which update themselve when data is modified in the first sheet). Now I want to set in sheet 2, (assume) cells B9, B10 and B11 to show me (copy) the values from G9, G10 and G11 from sheet 1 when the countdown was 00:00:05 (5 seconds before Start) and not update again if the data changes in the cell it pulled the data from.
Like G9 ='Sheet1'!G9 at 00:00:05 and stop here, do not update anything. OK?
I can do a part, but the real problem is: I can not make it stop cells to update.Stand frozen, freeze, not move, calm .. however. I do not want to seem pretentious (but my knowledge in excel are limited), the most appropriate would be a formula, not macro or VBA, if possible..
I"m looking for a formula that searches for sales from a sheet (that already has the sales ranked) and populates that into another sheet. But the 3 cells above/below would have the difference in sales.
I have a Pivot Table with fields for months and weeks. I also have a "Show Values as % Difference Field" that shows monthly or weekly % change. When I collapse the fields so that it goes from weekly to monthly (or vice versa), I have to manually change each Show Values As % Difference column. Is there a way to do this automatically or quickly?
I have a workbook containing several worksheets. I use one worksheet to collate information from the others. I do this by referencing the relevant cells I need from the other worksheets with the '=' command.
When this displays it shows as a '0' if the original cell is blank. Is it possible for this to show as a blank unless there is any data. I have tried the ISERROR function but it still leaves the entry as a '0'.
I have two spreadsheets, on that gets generated everyday which is a "fuel transaction report" and another with "captured fuel"
I was wondering if its possible to somehow intergrate it so that it will automatically show me if the "fuel transactions" have entries that does not reflect on the "captured fuel"
This is the fuel transactions report
Unitrans Fuel Transactions Repo  BCDEFGHIJKLMNOPRS21REGISTRATION : BH83MGGP  VEHICLE DESCRIPTION : HINO 500 1626 LWB F/C C/C     2226/11/2011NESERHOF MOTORSMISMATCH MISMATCH11980DIESEL100.021 009.152324/11/2011NESERHOF
[Code].....
See, I need to cross check the two reports to see if there is any missing fuel from the statement report from the supplier to what is getting captured by my people.
i am trying to amend my if statement in the 6 WEEK COLUMN to only show for entries that have 13 in the weeks column, I want the entries that show 2 or 26 to come up with a blank result. I have attached an extract for your information.
Formula query Column “A” list of dates correspondence in Column “B” list of dates correspondence reply out Need to calculate how many times the difference between date in and reply date is <= 5 in a specific time period.
The start date is entered in say, “K1” The end date is entered in say, “L1”
Also calculate difference in dates between 14 days and 21 days for time period Also with reply in column “B” not sent until over 28 days. I have tried SUMPRODUCT with (date_in=K1)*(date_out<=L1) for the dates but unsure how to define <=5
I work at a call center and I get the data as Date, Time of calling and Duration of the call. Now since this is an overseas call center, even though the calls spills over 12midnight, the corresponding date shows as the date when the agent logged in.
So I get the data in this format, Date: 06/11/2012, Time: 19:00:00 - 04:00:00.
How do I calculate the time difference at one go without first getting the time difference from the time of login till midnight and then add that to the time difference of midnight till time of logout. I have attached a file for your review.
Now to convert this in minutes (in number format), I multiply this number with 1440:
0:09*1440 = 9
When I click the cell this number is actually 9.0000005, rather than exact 9. I need it to be exact 9 since I have to match this number from other excel sheet.
does anybody knows an idea how to get the time difference without getting the #NUM! error message? Column A contains Start Time while Column B contains end time, if the time in column A is 11:45 PM and the time in column b is 12:15 AM, then I would get this error message...any idea how can i get the time difference without having to use the [hh]:mm format? i would like to use the hh:mm AM/PM format instead.
