Basically each line signifies a date & time that a deposit was placed and a date & time that a withdrawal was actioned. My goal is to be able to determine what kind of average response time we have between the time a withdrawal was requested and the time a withdrawal was actioned.
View 2 RepliesI have an excel spreadsheet that has about 40,000 rows....and about 30 columns across. The two columns I'm writing this about is column "PO#" and column titled "VALUE". The PO# column will have a number such as 4500234567...and the value column will have the cost of the PO#, for example $5,000.
Now within the the spreadsheet the PO# number and value will be listed multiple times....and there are hundreds of PO#'s listed, with its value.
I would like to perform some kind of filter on a seperate worksheet (? or whatever i needed) that would show the PO# number and value once.
I have data entry in a spreadsheet which shows minutes, seconds and thousandths of a second - example looks as follows:
12:48:589 or 04:21:998. I would like to be able show the time difference between two data entries, so for example:
09:57:145 and 08:12:055 would give a difference of 1:45:090
12:07:985 and 18:59:788 would give a difference of 6:51:803
To be honest, I even struggled to work out the values on paper. Is this even possible? If so, can you let me know the number format I should be using as well as the formula or even better, post an excel sheet with the example.
I have a column (D) where I put percentages complete of a task. When that reaches 100% I want to put the date in column (C).
I found many samples online but nothing I can modify to do this.. This one is pretty straight forward but I'm not sure how to have it look for the value and not just empty or not. I would be greatful for any help you can offer.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column <> 4 Then Exit Sub
If Target.Row = 1 Then Exit Sub
If IsEmpty(Target(1)) Then Exit Sub
If IsEmpty(Target.Offset(0, -1)) Then
Target.Offset(0, -1) = Date
Target.offset(0, -1).numberformat = "yyyy-mm-dd"
End If
End Sub
I have a sheet with a list of dates in it that I wish to format to show the day as well as date and time. I am trying to do this automatically with a macro, below is the before and the desired after.
Before
Format - dd/mm/yyyy hh:mm
Appearance - 29/03/2009 00:30
After
Format - ddd dd/mm/yyyy hh:mm
Appearance - Sun 29/03/2009 00:30
This works fine when I format the cells manually, but when I try to format them via macro '29/03/2009 00:30' becomes 'Sun 29/03/2009 12:30' which is obviously a totally different time! Has anyone got ay idea why it might be doing this?
I have a large data set which contains four coloumns: Supplier, Supplier number, order number, and date/time of delivery. The date/time coloumn is formatted as YYYY-MM-DD HH:MM with a 24h time notation. What i want to do is to find deliveries that occurs within 1 hour and that are from the same supplier. So i basically want to group (?) the data with regards to the suppliers and then, within these subsets, check for date/time entries that occurs within 1 hour from each others by "reading" each date entry and compare it to the following one(s) (and maybe stop comparing when the 1 hour interval is passed)?
Furthermore, even if this one might be very hard, it would be good if i could make sure that the entries that are "tagged" as within a 1 hour interval, wont be used as basis for a new interval or be included in other intervals.
The result i am after would be number of 1 hour intervals for each supplier and the number of entries in each interval.
Below is an example from the date/time coloumn:
12-03-08 15:32
12-03-08 15:33 ... Interval with 2 entries
12-03-12 14:54
12-03-28 11:57
12-04-16 09:10
12-05-07 13:41
12-05-07 13:46 ... Interval with 2 entries
12-05-28 11:55
12-05-28 12:00
12-06-04 12:01 ... Interval with 2 entries
12-06-04 12:09
12-06-11 08:30
12-06-11 08:31
12-06-11 08:59 ... Interval with 3 entries
12-07-02 11:10
I have a UserForm which writes data to rows in a master spreadsheet. I'm attempting to write some vba code for a CommandButton in the master spreadsheet which can identify and delete duplicate entries based on "user ID", "Date", and "Time". I would like the CommandButton to retain the most recent entry from a user and delete all previous entries.
My master sheet is set out as such...
A, B, C, D,
UserID, Date, Time, Response
The users could potentially submit multiple entries on the same day. Ideally I would like to be able to click a CommandButton and delete each user's submission but retain their most recent one (based on "UserID", then "Date", then "Time").
I've searched all day for a solution and I've come close but I can not figure out a code that accounts for my three variables ("UserID", then "Date", then "Time").
I have columns in my spreadsheet that will be getting updated periodically with a number. 1 week it might be 24, the next it might be 26.... and they would go in January's price, February's price....
The problem is, if a price is entered into the column, we don't know when it was entered other than the fact that it was entered in that month.
Is there a way to show the date and time of when a number gets entered or edited in a cell? This date/time could perhaps show up in a column right next to it.
I am trying to write a formula that will have the cell display todays date if it is after 2:00PM, and if it is before 2:00PM I need the cell to display Today()-1. I have tried several iterations and I'm stumped.
View 5 Replies View RelatedHow can I work out the following in hours an minutes: -
Cell A1 = 12th May 2007 20:00
Cell B1 - 14th May 2007 14:30
or should I put the dates and times in seperate cells? I would like the answer to show 42 hours 30 minutes
I would like to be able to track progress of various tasks/occurences by allowing users of a spreadsheet to just click in the appropriate column and in doing so, it would fill in the current time and date. I.E. Column headings would read, "Item Sent to Review", "Item Received From Review", "Item Sent to Specialist", etc. and I want users to be able to double click in a given column to populate with current date/time information,
View 7 Replies View RelatedI have a workbook containing several worksheets. I use one worksheet to collate information from the others. I do this by referencing the relevant cells I need from the other worksheets with the '=' command.
When this displays it shows as a '0' if the original cell is blank. Is it possible for this to show as a blank unless there is any data. I have tried the ISERROR function but it still leaves the entry as a '0'.
I have two spreadsheets, on that gets generated everyday which is a "fuel transaction report" and another with "captured fuel"
I was wondering if its possible to somehow intergrate it so that it will automatically show me if the "fuel transactions" have entries that does not reflect on the "captured fuel"
This is the fuel transactions report
Unitrans Fuel Transactions Repo BCDEFGHIJKLMNOPRS21REGISTRATION : BH83MGGP VEHICLE DESCRIPTION : HINO 500 1626 LWB F/C C/C 2226/11/2011NESERHOF MOTORSMISMATCH MISMATCH11980DIESEL100.021 009.152324/11/2011NESERHOF
[Code].....
See, I need to cross check the two reports to see if there is any missing fuel from the statement report from the supplier to what is getting captured by my people.
i am trying to amend my if statement in the 6 WEEK COLUMN to only show for entries that have 13 in the weeks column, I want the entries that show 2 or 26 to come up with a blank result. I have attached an extract for your information.
View 4 Replies View RelatedI have been working with personal record data in multiple workbooks, using sumif, index, vlookup etc to show various required info.
What I now need to do is take all the records of people aged between 16-18 and list this in a new worksheet.
I can get all the records I need in a pivot table but it needs to be something I can add columns to in order to gather further info.
Formula to calculate time allotted minus time used and show the difference in hour and minute.
View 1 Replies View RelatedI am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
i type into any cell in row 1 i need the time at that moment to be captured and shown in cell "B". When i type into row 2, the time which i entered the data must be captured into row 2 cell "B".
View 5 Replies View RelatedI am using a ComboBox in Excel 2007 in a UserForm. It is drawing on a row source which populates empty cells duplicates. How do I get the drop down box results to only show unique values and nonblank entries?
View 4 Replies View RelatedI have loaded a .csv file in which the first column contains date/times, e.g. 01/12/2012 00:00. How do I now tell Excel (2010) that this is in fact a date/time format? If I select one or more of the cells, click on the Number dialog box launcher and try to pick a suitable format tghe cells resolutely refuse to budge from being text (i.e. left-justified, still allows me to edit the 'seconds' component to a number > 60). Also which data type should I be using? The only one that appears to have a full date/time format listed is Custom (not Date or Time).
View 4 Replies View RelatedI have scoured the net for the following and have not been able to find a solution. I have found variations but not something specific for the use needed here.
I have attached a file with sample data which has the following format.
Column 1 = vehicle model (in this example golf, jetta, but there will be over 100 choices)
Column 2 = vehicle package option for specified vehicle model (automatic transmission, manual transmission, automatic transmission with air conditioning, etc...)
Column 3 = vehicle colour available for vehicle package option
Please note that Column 2 values for 'golf' are different than values available for 'jetta' (in the sample data I have blocked out common values with the same colour for quick and easy identification)
Also please note that Column 3 values of colour options vary for each 'vehicle package option'.
The behaviour that would be ideal is to have 3 drop down menus. The first drop down menu will allow selection from column 1 and will show each model only one time and repeated values will not be shown. The second drop down menu will only show the options available based on the selection in the first drop down menu. Likewise, the third drop down menu will show the colour options available based on the selection in the second drop down menu.
Since my data will involve hundreds of unique values in column 1 with plenty more added over time, it seems that the format of the data and the way it is laid out in the attached sample is the easiest way to organize it. It is perhaps also the easiest way to include new data without a lot of reprogramming.
Sample Data - Dependent Drop Down Cells Question.xlsx
I am creating a log to keep track of my start and stop times when I work on a project. I have two columns labelled START and END and I can use a macro button to make the current date and time appear in the cell under these headings. What I haven't been able to find is a way of getting the macro to move to a new blank cell ready to accept the next entry. For instance, move one cell to the right or move one cell down and one to the left.
Can anyone tell me how to do this? (recording it just names the cell so it always goes back to that named cell.)
How would I go about displaying in a cell the time from the last entry to the current but show 0 time if the range is empty?
E5 to R6 currently has space for numbers to be entered.
E3 has the command =NOW()
I would like E7 to show "xxx minutes have passed since last entry" where xxx would show 0 while the range is empty.
Trying to write an if statement giving a simple value of 1 if a time is outside of weekday hours 8am to 9pm. Cell formatted as (6/3/17 2:15 PM). Function should report "0" value as this is a Tuesday between 8am and 9pm.
A cell formatted as (6/3/14 7:54 AM) should result in "0" value.
I have a bunch of data and I want to be able to count the number of entries that fall within each of the 24 hour increments in a 24 hour clock. (military time)
For 12:00:00 all times would be between and including 12:00:00 and 12:59:59
Column B | Count
------------------
12:00:00 344
13:00:00 44
14:00:00 5
Many years ago I created a complicated spreadsheet that calculated employees's leave, sick, vacation etc. The timekeeper would indicate the amount(s) used for a particular day and it would automatically calcuate. The problem with this is that the time keepers do not use .25, .50, or .75 for the fractured time. Instead they used .15, .30 and .45. Previously, I used a convuluted if statement looking to the right of the leave to figure out what and how to calculate it and I'm trying to revamp it to make it more streamlined.
View 14 Replies View Relatedi have a slight problem i have this script which i want to run on all worksheets which are numbered (i.e. 1,2,3,4 etc) and to delete the rows in the F128 range which is under 00:05:00. I just cant figure it out to get it working.
View 2 Replies View RelatedI have a database of over 10,000 entries. I am trying to get the average time for four specific entries (department, test 1, test 2, test 3). I did an averageifs for the tests individually and calculated the average time individually.
The three tests comprise of the department.
Average of test 1 = 40.8
Average of test 2 = 39.9
Average of test 3 = 94.8
Average of dept using the averageifs is 41.3
Average of dept by taking the average of the values above is 58.8
Why is that discrepancy there?
I need to generate a report that indicates how long it took a vendor to respond, and indicate if the time was less than 2 hours.
I'm having trouble with a formula that will indicate how long it took for the vendor to respond during business hours (8-5 monday through friday). I can easily calculate the total elapsed time, but I'm at a loss on how to account for the after hours time period.
Would this be better handled with VBA?
I have a column of values resulting from subtracting a static date and time from the current date and time.
This means it is constantly updating, which makes it impossible to sort.
All my work depends on sorting those values, though.