Please find the attached sheet.
I just want to know whether is it possible to condional format multiple cells based on multiple cell values.
Eg: In the attached sheet,when a driver is standby and the vehicle no column should be empty,if accidently a data entry is done in vehicle no column it should highlight the whole area (ie,from A3 to E3).
I have a table showing the quantity of products that were sold to stores within a particular week. The following data are shown in each column: Distribution centre (DC) ID, Item ID, Item description, Store ID, Day of delivery, Invoice Number, Quantity delivered - see example attached.
I want to sum up the quantities of identical items that were delivered to the same store from the same DC. In other words, the following conditions have to be met: (a) Distribution centre ID has to be identical, (b) Item ID has to be identical, (c) Store ID has to be identical. To give a specific example as per the attached file, instead of having 2 rows for 2 deliveries of 5 + 3 boxes of chocolate to store# 1, I want to have just one row showing that store# 1 had 8 boxes of chocolate delivered, a second row for that store would show that store #1 had 10 boxes of tea delivered to it. I would like the summed up quantity data point along with the Distribution centre ID, Item ID, Description, Store ID, Day of delivery, Invoice Number to be in a new tab, i.e. I want to reduce the table size and do not want the original rows to be in the new table.
Since my table goes all the way down to the last row 65536, I would need the formula/macro to be able to recognise identical DCs/items/stores and then sum up the quantities (there are about 1500 different item IDs). Can you think of a solution??
How I can go about finding missing entries. I have an excel sheet that has column A as employee name and column E with a date. There are 10 employees so there should be 10 entries for each date. I need to be able to determine which employee hasnt entered information for a given date.
View 1 Replies View RelatedHow can I make this code repeat itself on different lines?
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
If Sheets("Sheet1"). Range("A10").Value > "" And Sheets("Sheet1").Range("B10").Value = "" Then
MsgBox "Please Enter Order Number in Line 10"
Cancel = True 'cancels the save event
End If
End Sub
The code works perfectly for that one line but I need it to repeat independantly in the same columns but for rows 11 up to and including 23.
If I need to make the message generic like " Please Enter Order Number" then that's fine.
how to conditionally format the data in one table based on the criteria specified in another table on a different worksheet.
The Table I'm trying to format has a series of Products and Volumes that'll be available on different dates. Table 1.jpg
The Criteria table has each product and a corresponding Key Data. Table 2.jpg
All I want to be able to do is have the cell corresponding to the criteria to be highlighted but can't for the life of me figure out how to do it. If it makes a difference I'm working offAttachment 338501 a Mac. Excel Version 2011 14.4.3
I have two spreadsheets, on that gets generated everyday which is a "fuel transaction report" and another with "captured fuel"
I was wondering if its possible to somehow intergrate it so that it will automatically show me if the "fuel transactions" have entries that does not reflect on the "captured fuel"
This is the fuel transactions report
Unitrans Fuel Transactions Repo BCDEFGHIJKLMNOPRS21REGISTRATION : BH83MGGP VEHICLE DESCRIPTION : HINO 500 1626 LWB F/C C/C 2226/11/2011NESERHOF MOTORSMISMATCH MISMATCH11980DIESEL100.021 009.152324/11/2011NESERHOF
[Code].....
See, I need to cross check the two reports to see if there is any missing fuel from the statement report from the supplier to what is getting captured by my people.
I have a problem with the format( Date) function.
On the computer I've developed the application everything works but when running the application on another computer I get a compilation error telling that the project or library doesn't exist
This is quite urgent so I really appreciate a quick solution.
On the computer that fails it says that Type Library is missing when looking at accessible references. Can this be something explaining the problem ?
Private Sub Workbook_OpenTest()
Dim varWeekW As String
varWeekW = Format(Date, "YYWW") ' Here it fails
End Sub
I have a macro to create a report and it selects to place in the pivot table. The problem is that sometimes in my basic data for creating the pivot table, not all the same fields are there. Here is what it looks like for this section now.
With ActiveSheet.PivotTables("PivotTable2").PivotFields("Category Id")
.PivotItems("ARMS/AMMO/EXPLOSIVES").Visible = False
.PivotItems("COMPUTER").Visible = False
.PivotItems("COUNTERFEIT GOODS").Visible = False
.PivotItems("DRUGS").Visible = False
.PivotItems("GENERAL MDS/OTHER").Visible = False
.PivotItems("PROHIBITED ITEMS").Visible = False
End With
In the instance for today, the field "Drugs" is not in my main data. So I get an error box and it stops because the category is not there. How can I get this to continue if one of the fields is not found?
I'm trying to evaluate the last 8 entries of a particular column of data that I regularly update (K4:K5000). This data is filled with numbers ranging from about -50 to 50 and will occassionally have a blank entry.
I'd like to evaluate these last 8 entries using a couple of different conditions.
#1 - In column D4:D5000, I have three entry values - X, Y, or Z. It will never be blank. I would like for the Excel to automatically review the last 8 entries of columns K and D and do two things...
a. provide an output of a count of how many X, Y and Z there are for the last 8 entries (format: 4-3-1)
b. provide an output of an average of the values of K for each of X, Y, and Z... (i.e., avg of X = 4.4; avg of Y = 2.1; avg of Z = 10.7)
#2 - Next, I would like to add a third column to the mix (Column C4:C5000 with entries >0 and 0, Y>0, Z>0 there are for the last 8 entries (format: 4-3-1)
b. provide an output of an average of the values of K for each of X>0, Y>0, and Z>0 (i.e., avg of X>0 = 9.4, etc.)
I have a Sheet ( Named "Summary" for Example ) of about 4,000 Rows that has a LOT of Conditional Formatting.
I Added Another 100 Rows this Morning and when I Tried Saving it a Message Saying that Not All the Formatting for the New Data that had Been Added had Been Saved. Is there a Macro or Something I can Run that will Make the Conditionally Formatted Cells Stay the Colour that they are but Delete the Conditional Formatting Part of it Achieved Using "Format" & "Conditional Format" from the Menu Please.
Ideally I would like to be Able to Enter the Number of Rows ( From Row ? to Row ? ) that I want this to Apply to.
I have a problem when Im trying to calculate averages in my pivot table. I dont know how to handle my missing values. If I leave them blank I cant get the average at all because the values end up under the dates instead of in a column next to the dates where I want them to be. If I write 0 it uses it as a value, eg 2+2+0 and i get 1,33 instead of 2. Also the zero could be a value for some of the parameters, so it's no good.
I am new to pivot tables.
On occasion I cut a table from a website and paste into Excel. If/when that data is subsequently deleted from the sheet the gridlines no longer show. I've tried turning the gridlines on and off to know affect. I've tried setting and clearing borders, but that made no different to the gridlines either. Even if I highlight the entire sheet and delete it makes no difference. I can't think of anything else to try.
View 2 Replies View RelatedI am looking for a formula that I can use in the lower table to fill in the missing County cells, based on the values in the Town/Zip columns on the top table (I apoligize for the crudeness):
CountyTownZipAbleTownA00000AbleTownB00001AbleTownC00002BravoTownD00003BravoTownE00004CountyTownZipMemberTownD00003BlackTownC00002FrankTownA00000GreeneTownB00001JonesTownA00000SmithTownC00006ThomasTownE00004White
This would consist of hundreds of Zips and Towns and this is just an abbreviated mock up.
I have five fields that have a conditional format applied to them: (see attached).
Columns J, K, L, N and O. These conditionals highlight if a minimum number is entered. Ex. Minimum pushups for a 30 y/o male is 27, if a 26 is entered it highlights red. The total score (where I need this to perform) is calculated in column Q. It will format red if the total score is below 75 but what I can't figure out is how to make it format if any of the previous minimums have not been met.
Ex. In cell L4, his crunches were 25 (a automatic failure -- red formatting). Now the total score is above 75 so it calculates as passing (green), but I need it to highlight red regardless because of the minimum not met in cell L4.
I have a range which has conditional formats based on other cells. I want to copy this range into another sheet and retain the current formats as fixed formats without copying the conditional formulae. ideally in VBA.
View 5 Replies View RelatedIn the same worksheet, I would like to format column "U" based on the alpha character in column "T" and also format column "AA" based on the alpha character in column "Z". There are three alpha characters that will be used in columns "T" and "Z" ( upper case and lower case), "A" with the format of $ #,000 & "H" with the format of $ 0.00 & "P" with the format of percent %. I want to format column "U" & "AA" prior to entering a value.
Column "T" & "Z" are a pull down menus containing only the values listed above (a,A,h,H,p,P)
I had asked and received an answer regarding the above pertaining to columns "A" and "B" and was given an answer that works, however, today my boss changed the configuration of the spreadsheet and for the life of me, I could not get the code to work using the new parameters.
Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
Using Excel 2013,
I clicked on a field in my RowLabels
I then clicked on the Filter Arrow for the RowField
The SelectedField prompted with the correct field of 4 possible fields
However the item I am looking for is not in the list but I can plainly see it on the screen.
I have a column (D) where I put percentages complete of a task. When that reaches 100% I want to put the date in column (C).
I found many samples online but nothing I can modify to do this.. This one is pretty straight forward but I'm not sure how to have it look for the value and not just empty or not. I would be greatful for any help you can offer.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column <> 4 Then Exit Sub
If Target.Row = 1 Then Exit Sub
If IsEmpty(Target(1)) Then Exit Sub
If IsEmpty(Target.Offset(0, -1)) Then
Target.Offset(0, -1) = Date
Target.offset(0, -1).numberformat = "yyyy-mm-dd"
End If
End Sub
new data goes into the report, the pivot table looks at a dynamic range and confirmed that the range doesn't select any empty cells.
Just wrote a macro to fill missing cells with a data on workbook open.
all the data is date form, yet still when i refresh the pivot table i look my montly grouping, when i try to group again it says "unable to group"
Please refer to attached spreadsheet
I receive data from an external source and it displays what appears to be dates in column B.
In column G I apply a formula to display month/year info.
It turns out that some of the data in column B is valid date data, but other data imports as plain text and therefore I can't get the month/year info that I require.
I have attached just a small example.
I get this data monthly and it usually covers thousands of rows and therefore impractical to change manually.
I have a set of data (assume 2 columns, one with a long name and the second with a time). The names contain variables that must be used as criteria (a single entry may contain "Blue" and "On"/"Off") and times vary, based on when the Name turns "On" or "Off" [in minutes: 25 (On), 47 (Off), 89 (On), 100 (Off) and 137 (On)]. I need to create another table that automatically inserts values for all times, to include the missing times (0 min thru 24 and 26 thru 46, etc.). EX: If the first entry is "Blue-On" at "25 minutes", the cells from 0 minutes to 24 minutes are each "0" and become a "1" at 25 minutes - the following cells are "1" until 47 minutes (where it is turned off). (1 and 0 represent "On" and "Off", respectively)
How can I created a formula to insert the correct numbers into the correct places? I'm willing to have multiple cells with formulas and simply hide the columns that are doing the calculations.
apply conditional formats to a cell, based on the entries in another, different cell?
View 2 Replies View RelatedI have a dividend table of 8 cells (vertical) with alternate Date and Dividend amount. Is there an elegant function to add the dividend up to a given date?
i.e. if 23 Nov 09 is the 2nd dividend and I need dividends to this date,
I need have a table that displays only the last so-many (250) elements of a large data collection (table), updated continuously.
View 6 Replies View RelatedI have two columns which i want to compare, they contain text data such as A123.
what I'd like is if its in column A and not in Column B then add to bottom of column A.
Once its in column A i can do the vlookup's to draw the other data, costs etc, over but don't know how to identify, and add, the missing codes to the list.
I have a table with Companies in a column and Countries in the heading row. Now in this table I have an entry "1" against certain countries for each company.
I need to get a concatenated (Company&Country) list, but I need this is all in a single column.
Companies list.xlsx
I wold like to summarize values of a certain numbers of enties (eg. 5), on a specific criteria, but discarging earlier entries of the same criteria. An example being:
Entry
Value
Entry A
1
[Code]....
If I would like to summarize the values from Entry A, but firstly do so from number three entry buttom-up, and only the prior five values, how could this be done?
How do I automatically generate an Entry Number for each entry in a table?
I have a sheet to build up a database of information and a Userform for the data to be input through. Each time the user selects to create a new entry with the userform I'd like to be able to automatically provide a number (i.e. Entry 1 of 12) in the Entry Number field which will then be transfered back to the sheet.
In addition, if an entry is deleted from the sheet the entry numbers beneath the deleted entry will need to update.
Range B9:B58 and I9:I58 data set 1 (worksheet Deal Selection)
Range J5:J18 and L5:L18 data set 2 (worksheet Tables)
Identical tables. Taking worksheet Deal Selection as our starting point column(s) B and I
If the user adds a new supply customer in column B then I would like this new customer to be
Reflected in worksheet Tables column J5 at the end.
And visa versa for column I add to column L5 at the end same work sheet.
I am guess that this could be done by amending the current macro button
Add Supplier and Add Demand on both side(s). but not removing it current functions
I have also added the question to another forum experts exchange as i am have difficult completing this task.