In one column, i get the ID. In the next column of the same row i get the status. My question is to find the number of occurrence of a specific ID with a specific status on another sheet. Attached worksheet sheet "count" has the source with ID at column C and status at column D. My expected result is in another sheet "expected result". I think a macro is needed, but i can't really figured out the way to do this counting.
View 5 RepliesI have two sheets:
Sheet 1
Col A
A
B
C
D
Sheet 2
Col ACol B
AXX
BYY
AXX
AZ
DD
DD
I want to count the number of unique occurance of value in Col B in Sheet 2 as per value in Col A in sheet 1 and Sheet2.
My output result should be like following:
Result
Col ACount of col B value in Sheet 2
A2
B1
C 0
D1
I have a column of data that contains a two letter identifier, which can sometimes be combined with another 2 letter indentifier: Example
Column D
AA
DC
DC,AA
How would I get countifs to count each occurrence of AA or DC by itself?
I have to calculate bonus payments for people working O/S. I have a 5 year calendar in month blocks (60 months/columns). In each month there is a percentage 'time O/S' figure.
If an employee is O/S for 3 consecutive months they get bonus 'A', 6 consective months bonus 'B', etc. How can I evaluate the 60 columns, returning the number of times 100% occurs in 3 consecutive months/columns. I have found examples of similar solutions but they will return a value of 3 if there are 5 consecutive months of 100%...
ie. 100 100 100 100 100
= 100 100 100 *** ***
& *** 100 100 100 ***
& *** *** 100 100 100
= 3
but I need it to equal 1
I'm trying to create a calendar overview of transactions from a raw data list. the result should be an amount, based on the number of occurrences of a specific transaction type at a particular date. Thus, the counter shall be based on two conditions. I've tried COUNTIF, INDEX, MATCH and VLOOKUP combined but I don't seem to "go all the way".
View 1 Replies View RelatedCountif can be used to count the no. of occurrence of a certain value within a range. However, if the range is being filtered, can the no. of occurrence be counted?
View 3 Replies View RelatedWill it be possible to Count continuous occurrence of each signs 1-X-2 and arrange them in corresponding column From Q To AE as shown below in example table: 1
Draw result is shown in cells A2:N11 and result of Count continuous occurrence of each signs 1-X-2 is shown in cells Q2:AE11
For example we take a look row 7 where first sign-2 has occurred 3 times, as
Column Q is for to place result of sign1
And column R is for sign-X
So far count of sign-2, which is 3 times, must be paced in cell S7,
And then count of sign-1, which is 1 time, must be placed in cell T7,
And then count of sign-2, which is 5 times, must be placed in cell V7,
And finally count of sign-X, which is, also 5 times, must be placed in cell X7,
[code]....
Will it be possible to Count continuous occurrence of each signs 1-X-2 and arrange them in corresponding column From Q To AE as shown below in example table: 1
Draw result is shown in cells A2:N11 and result of Count continuous occurrence of each signs 1-X-2 is shown in cells Q2:AE11
For example we take a look row 7 where first sign-2 has occurred 3 times, as
Column Q is for to place result of sign1
And column R is for sign-X
So far count of sign-2, which is 3 times, must be paced in cell S7,
And then count of sign-1, which is 1 time, must be placed in cell T7,
And then count of sign-2, which is 5 times, must be placed in cell V7,
And finally count of sign-X, which is, also 5 times, must be placed in cell X7,
Example table: 1
ABCDEFGHIJKLMNOPQRSTUVWXYZAAABACAD1P1P2P3P4P5P6P7P8P9P10P11P12P13P14
1X21X21X21X21X221X21X21X21X21X
11111111111111
3111XX22X11111X
322
1
51
[code].....
count occurence of name Vijay in single cell b4. excel formula.
Vijay is good, Vijay lives in Delhi. My another friend with same name Vijay….. Vijay joined exl in 2008. Vijay has one sister named Vijaya.
How To Count And Fill Occurrence in sheet2 ...
View 9 Replies View RelatedI have a list of names (300 now but growing every month by 100-200). In the row with the name contains data I need to view: date, $, #, etc...
I want to quickly see whos name appears the most, 2nd most, 3rd most, etc.....(at the end of the year I will have 2000+ names, most names will only be listed 1x, I suspect nobodies name will be listed more than 60x.)
I also need the ability to view the relative data of the person's name that is listed most, 2nd most, etc....
I need to identify every 5th occurence of a product code (In column B)
the list won't be consistent i.e. Code 80100811 may appear in row 2, 17, 35, 47, 51
So I would need to identify the one in Row 51 in the above example,
WorksOrderNumber
Product Code
DateEntered
Column1
56
80100811
01/08/2012 00:00
[code]......
I have a spreadsheet that lists all the work done by employees within a specific area. Some employees cover multiple areas.
I am now needing to work out the average work completed by each area. I need a formula that will count the number of employees by each work area.
I know this is something I have done before, but my mind has gone blank and I can't for the life of me work it out again (it's one of those days).
Row 3 of the spreadsheet contains the codes for the work areas they cover (CM, V & TC) and some employees only cover one (which would be a simple CountIf) but some have multiple.
What is the formula to, for example, count the number of people who have CM in row 3 even if they also have other entries in that cell.
I am trying to find an in-cell formula to find a cell with a specific value and return the value in column A of the same row. Typically this is handled by Lookup or VLookup or HLookup. However, these only find the first occurrence of the value, I even know how to find the last occurrence, but what about in between? In my spreadsheet I have reoccurring values that I need the value in column A of the same row, but I need more than just the first or last but every instance in between. How to do this?
View 4 Replies View RelatedI understand that the function FIND(find_text, within_text, start_num) will find the first occurrence of a stated string. And by adjusting the start_num, you can skip a set number of characters before the search begins.
But, is there a way to find the Last occurrence of said string? In my case the find_text string may occur multiple times in the variable length within_text cell to be searched.
Sample: Find the last occurrence of MDU
Code:
Sample string1 - ABDJ FFU MDU WWW AEH JJF MDU JJI LLK OOI HAHA QWAS
Sample string2 - HFUR MDU HDS IGH RJR KDHF LLDE MDU KKJ MDU GGG
In the above 2 sample strings the output of the Find() function needs to be 26 & 40. Having a cell formula would be desirable, but if it can only be done by VBA that is acceptable, also.
In an employee attendance file I am trying to count the number of times an employee has taken 3 or more days of leave together (continuously) in a month. My attendance file looks something like this
sat
sun
mon
tue
wed
thus
fri
[Code] ..........
In the example above E001 has taken 3 continuous days leave twice so formula should return 2, for E002 & E003 the answer would be 1 each.
I know there's a pretty compley formula out there that counts the occurence of say Fridays in 2009 - does anyone have this? I had it before in a file but ranged valued the results showing the count of each day of the week for each month in a given year.
View 9 Replies View RelatedI would like to find the position of the last occurrence of a character in a string. For example, I have a string with the following:
"c:wwgpeToolbidsTest File.GP$".
I would like to find out the position of the last '' in the string because I want to pull the filename, 'Test File.GP$' into a variable. I would like to avoid writing code to do this. Are there some Excel functions I can use for this?
This section of code I am working on requires me to find an exact text (I tried lookat:=xlWhole, but I can't get it to work right). The problem being is when it searches for Q1, Q10 is an acceptable answer ans so on. I need to get the 4th occurrence, but my research into Nth occurrence stuff is confusing.
The search is in a single column.
With Workbooks("FY12-Q3 Data Tables.xlsx").Sheets("PBA Crosstabs").Columns(1)
Set c = .Find(rCell, LookIn:=xlValues, lookat:=xlWhole)
Set c = .Find(rCell, After:=c, lookat:=xlWhole)
Set c = .Find(rCell, After:=c, lookat:=xlWhole)
Set c = .Find(rCell, After:=c, lookat:=xlWhole)
End With
I am working with a data sheet that holds a cell containing a number of position entries with each entry separated by a carriage return within the cell. I need to determine the entry associated with Accountant. The formula below determines if the entry Accountant exists and if so, displays 14 characters of information starting after the 12th character. The entry after "Accountant" is variable, but will have a carriage return at the end of the line. How can I identify the placement of the carriage return after the Accountant: entry?
=IF(ISERR(FIND("Accountant:",'Dynamic Report - WIP HDCI-Qu~01'!G7)),"",MID('Dynamic Report - WIP HDCI-Qu~01'!G7,FIND("Accountant:",'Dynamic Report - WIP HDCI-Qu~01'!G7)+12,14))
7900 Personnel:7980 PR taxes:7985 Medicare
I can use the FIND function to find the first occurrence of ":" and therefore select everything to the right of it, but how do I locate the second occurrence of ":"?
I want to segregate the 7985 Medicare. What if the data varies, i.e. some rows have one occurrence of ":" and others have two?
7900 Personnel: 7970 Bonus. I always want to segregate the last 4-digit account number and description.
I need a function that will do the following:
Look at the name in Column H2 of the current spreadsheet
Locate that name in Column H on worksheet 'Project Info' for the match with the most recent date in column F also on 'Project Info'
Return the value of corresponding column K on 'Project Info' divided by column I on 'Project Info'
Project Info has a header line so the data starts on line 2.
I don't know how to tell it to find the most recent date.
I have just been thrown back into programmng after a two year break so I am obviously rusty.
I have the following
Sub NumberOfReceiptFlowsAfterInitial4()
Dim my_cell As Range
Dim first_one As Double
Dim second_one As Double
Dim running_total As Double
Dim final_total As Double
Dim result As Double
I need something similar to this routine that will find the last occurrence of a cell that contains the value greater than or = 1%.
I've been working on my original problem and have gotten a little closer to the results I'm looking for but not quite there. Basically, I'm now running into a problem of only finding the 1st occurence in a range of cells when I want to find every occurrence and show the result. Also, the range of cells to look for in my argument has 2 criteria, the start date and the end date. Can anyone tell me if there's a way to search through a range of cells and return every instance of that cell even if it's duplicated?
I've also attached my project to better understand what I'm trying to accomplish which is the use of a Gantt Chart as an employee scheduler as opposed to a task (or project) scheduler.
I am writing a program which would look for look for the word " TOTAL" in sheet1 and then assign several values in sheet 2 based on cells offset of address of "TOTAL". This is repeated and down rows of sheet 2. Everything works except that it is giving repeating the first "TOTAL" address; i.e. it doesn't seem to go to the next met criterion.
Sheets("Summary").Range("A1").FormulaR1C1 = "=COUNTIF(Sheet1!C,""TOTAL"")" ....
I have a file that the user selects and when they enter a value (in this case, a job title) into the input box, my macro looks for the value in that file. If the value is there, a msgbox pops up that lets the user know that the value was found and it then goes to that cell, displaying in the next msgbox the cell address of where the value was found. I already have the code down for this part of the macro.
My problem is what happens if the file has the same value more than once. Ideally, I'd like to display a message box that returns the addresses of both cells with the same value and then prompts the user to select one of these values as the value they are looking for. I am not sure if a msgbox or a msgbox and then an input box are most appropriate for this situation. Once the user does this, the macro continues. The rest of my macro is built on the cell where this value is, so it is crucial that I make sure there is at least one value selected. Any help is much appreciated. I have included a sample worksheet of what this situation might look like.
Here is the code I presently have for this part of my macro.
Sub GetOpenFileName()
strFind = InputBox("Please enter the job title you wish to search for:", "Search for job title in this file")
If strFind = vbNullString Then Exit Sub
With Sheets(strSheetsMainCompProfile)
If WorksheetFunction. CountIf(Range(Cells(1, 1), Cells(100, 100)), "*" & strFind & "*") = 0 Then
MsgBox strFind & " cannot be found on this sheet"
Else
I'm getting an export from a CDR. This export contains the date and times people log on and off from a queue. For logging in they dial 511, for logging out they dial 512. They get a voice prompt and type their password. I need to know how much time they daily spend in this queue
At first this looks pretty easy. I just make a sum of all the times they called to 511, then a sum of all time they called to 512 and finally I substract those values and I end up with the correct time spend in the queue.
The problem comes when they call multiple times to 512 without actually logging off. For example, they type the wrong password or simply hang up.
Result is this in the CDR
FROM TO DATE TIME
101 511 23/12 08:34
101 512 23/12 11:58
101 511 23/12 12:34
101 512 23/12 14:45
101 512 23/12 14:47
101 512 23/12 15:00
The actual time spend in the queue is 5 hours and 50 minutes. But Excel calculates this as 35 hours and 22 minutes, because it counts the 512 values no matter what.
How can I make sure that Excel only calculates the values of they are either the last value in the row OR if they are preceded by 511?
I want to grab everything left of the last occurrence of "." in a string, and in the next cell everything right of the last occurrence of "."
so say the string is 111.111.1.222
column 1
111.111.1
column 2
222
my current code (which works, but its messy) for the first cell is
I have a spreadsheet that holds customer information. What I want to do is find how many customers there were last month. I have a cell (C1) which has last month displayed as 2009/05. A1 holds the customer ID and B1 holds the date they used us. Each customer may has used us many times and I'm having a nightmare trying to solve this.
View 8 Replies View RelatedI am working with imported survey data - all the questions are sorted by columns with each respondent's answer in rows. One open ended question on the survey asks people in which states they have lived, so each response cell can contain multiple text values if they have lived in multiple states (and they often respond in full sentences - as in, "we lived in Texas for three years then moved to Arizona"). How do I search all the rows in that whole answer column to count all the mentions of each state? (To complicate matters, the search cannot be case sensitive - although I guess I could do a find and replace to fix the variance).
View 14 Replies View Related