Linked Comboxes Populating Multiple Textboxes
Oct 17, 2009
I have a user form with:
ComboBox 1
ComboBox 2
Text Boxes 1 - 12
ComboBox 1 runs through a sheet range and removes the duplicates values
ComboBox 2 is linked to Cbx1 and is populated with the second column of that range, depending upon Cbx1's value.
Trying to populate the twelve Text Boxes with the remaining row of values. To program those boxes to clear each time either Cbx 1 or Cbx 2 is changed. This is the section of code I can't make work properly. I don't raise any errors, but the TextBoxes remain blank none the less.
View 2 Replies
ADVERTISEMENT
Dec 29, 2006
I've created a spreadsheet that has two drop down lists. Based on what the user selects from the first list, the second list is populated. It's working great except for the items in the first list that use special character, such as a -, or &. If necessary I can upload a small example of how I have my sheet set up, but I think I found it on this site!
View 4 Replies
View Related
Jun 8, 2006
I added a combo box to each sheet of a workbook. Each box referenced a range within the sheet and linked to a cell on the sheet. Each box was tested and worked perfectly. Yesterday. On opening the book today, however, I've discovered each combo box is dead in the water. They are totally inactive and can't be activated in any way. I've checked the properties sheet for each and can't see anything out sorts. As a test, I added a new combo box to a sheet, and interestingly enough, it not only works fine, but also seems to have activated the original box, which also now works fine. Other boxes on the other sheets are still inactive, however.
View 5 Replies
View Related
Sep 25, 2008
When one creates multiple UserForms with multiple (identical) TextBoxes, every control must have its own event handler procedures. All these TextBoxes in my workbook are to capture numeric data to populate various cells in the workbook.
Would you recommend using a Class Module to handle these events for TextBox controls, rather than having to repeat the event handler code for each control?
And if so, do you have some code that I can use that will cover most of the events and potential error handling routines for numeric input data?
View 9 Replies
View Related
Feb 24, 2014
Im struggling to find a formula to populate cells based on values to be checked in two fields (ICODE, COMPANY) as shown below.
In the example here, all records where ever the ICODE = 49, i need to populate the fields(columns) AD1,AD2,AD3 or AD4 with the product name of the same company where the ICODE <> 49. There could be between 1-7 products per company.
CURRENT SHEET
ICODE PRODUCT COMPANY AD1 AD2 AD3 AD4
89PENS ABC STATIONERY CO LLC [code]....
The attached example file may be a better alternative to view this problem.
View 2 Replies
View Related
Nov 7, 2003
I have a number of textboxes, or other boxes, using exactly the same code. In visual basic you can assign an index to these boxes and create one code where the index number specifies the box you are working with.
I have tried finding a way to do thing in VBA, but came up against a blank. I realise that this is either not possible or very simple, but right now I am stuck with the 'not possible'. Does anyone know if the 'very simple' is an option. It would greatly decrease the size of my program, make it easier to visualise and not make me change to much each time.
Of course I refer to subs as much as possible making these routines 3 line routines (sub-call-endsub), but still there are a lot of textbox1_click() routines whereas textbox_click(index) would be nicer.
View 9 Replies
View Related
May 15, 2006
I have 2 textboxes, wherein I want them to be validated for Only numeric entries, and also that they should not be empty.
I can write 2 procedures for that, but then thats efficient coding...
In the attached worksheet,
step 1) select M+R in column 2
Step 2) make some entries in the 2 textboxes.
I have written some code, but thats not working...
View 5 Replies
View Related
Jun 10, 2008
My userform requires a user to enter amounts in 5 different textboxes.(textbox1-5) I have created a textbox6 to attempt to capture the totals (should be numerical) of textboxes1-5, even if this textbox figure is a 0 or a minus figure. I have browsed a few other posts with roughly the same issue and have come up with some basic code as per below... the code is pasted into each (textbox 1-5) textbox_change() code.
If TextBox1.Value = "" Then Exit Sub
If TextBox2.Value = "" Then Exit Sub
If TextBox3.Value = "" Then Exit Sub
If TextBox4.Value = "" Then Exit Sub
If TextBox5.Value = "" Then Exit Sub
TextBox6.Value = CDbl(TextBox1.Value) + CDbl(TextBox2.Value) + CDbl(TextBox3.Value) + CDbl(TextBox4.Value) + CDbl(TextBox5.Value)
View 6 Replies
View Related
Dec 10, 2009
I created a right-click menu for userform textboxes from a code I found through googling. It works perfect, however, I don't know how to get it to work for more than one textbox.
Here's the code for the userform:
View 10 Replies
View Related
Jan 9, 2010
Is there a shortcut to rename multiple TextBoxes?
So far I've been renaming each individual TextBox manually. This takes forever...
I have a lot of TextBoxes & hope there is a faster/easier solution.
Example:
TextBox1 --> OtherName1
TextBox2 --> OtherName2
TextBox3 --> OtherName3
TextBox4 --> OtherName4
TextBox5 --> OtherName5
TextBox6 --> OtherName6
TextBox7 --> OtherName7
TextBox8 --> OtherName8
TextBox9 --> OtherName9
TextBox10 --> OtherName10
View 9 Replies
View Related
Nov 2, 2006
re: Validating Textbox to work on a simple form.)
View 2 Replies
View Related
Dec 30, 2006
I have a form using in Excel 2003 that's 5 columns and 20 rows I need to populate the Textboxes with values from a worksheet. I want to use a loop statment that fills the first row, then increments to the next row until all 20 are filled. I have named each row the same name except the last character is the row number 1-20.
ie on the form textboxes named:
NameRow1 AddressRow1 CityRow1 StateRow1 ZipRow1
NameRow2 AddressRow2 CityRow2 StateRow2 ZipRow2
This is what I want to happen
Sub test()
Dim RowNumber As Integer
Dim FormRow As Integer
Dim NameRow As Object
Dim AddressRow As Object
Dim CityRow As Object
Dim StateRow As Object
Dim ZipRow As Object
RowNumber = 3 'Row in Data sheet
FormRow = 1 'Row on form
NameRowString = "NameRow" 'first part of the named object
Do While FormRow < 21
NameRowVar = NameRowString & FormRow................
View 2 Replies
View Related
Jun 13, 2008
When opening up a userform I'm attemping to change the value of a range of textboxes ( 6 to 18) to 0.00.
To do so I used the following code which is controller by a command button
Private Sub CommandButton1_Click()
Dim i As Integer
For i = 6 To 18
userform1.textbox(i).value = format(0,"#,##0.00)
Next i
userform1.show
End Sub
It keeps stalling at "textbox(i)"
A simple solution I'm sure.
Simple problem I'm
View 9 Replies
View Related
Feb 6, 2014
I have a total of 648 textboxes on my form. Some of the textboxes allow for char values, some numeric and some monetary. The problem I am running into is with the monetary. I am trying to say on initialize, I want to autoformat 208 of these textboxes to $0.00 and when the users puts in an actual amount it changes to $100.00 or whatever the amount. It would be ideal to just have the textbox blank and when the users puts in something it is formatted automatically to $100.00. Just like I would if I were formatting an Excel column or cell. Here is my code so far: (hopefully no typos in code. Cannot copy and paste as using home computer. My work computer blocks the excelforum site.
[code]....
View 6 Replies
View Related
Mar 17, 2012
I have 35 text boxes to add to the bottom of a chart. Is there no way to mark multiple boxes and align them to the left or right or make them all the same height?
View 2 Replies
View Related
Apr 27, 2006
I have a userform with about 20 textboxes. I would like to use the same "data validation" procedure on each textbox as the user enters data into the form. I'll use the exit event to trigger the validation. As the user moves from one textbox to the next, the data will be validated; if it's out of range, the user will be prompted to correct it.
Is there a way to have a common event procedure so I don't have to have a separate procedure for each textbox individually? I know I can put the actual validation code in its own procedure and then call it from each event procedure but that would still leave me with 20 event procedures like:
Private Sub Textbox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
ValidateData
End Sub
View 7 Replies
View Related
Apr 2, 2007
I am trying to create a form with a text box that when text is entered, it adds to the userform another textbox with that data in it. The focus then goes back to the original textbox so that more may be added indefinitely, all with relative position to the most recently added textbox. Here is what I have so far, works for one time, but not multiple textboxes. The original textbox is "txtAPID"
Private Sub MakeNewTextBox()
Dim newTextBox As TextBox
Dim ControlTop As Long
With LastAirport
ControlTop = 30
End With
Set newTextBox = Me.Controls.Add("Forms.TextBox.1", "txtNextAirport", True)
With newTextBox
.Left = 20
.Top = ControlTop + 3
.Height = 15
.Text = txtAPID.Text
End With....................
View 2 Replies
View Related
Jun 11, 2007
Have a slick way to have multiple textboxes on a userform updatable by a single calendar control located on it's own userform.
basically, i have a userform with multiple textboxes. A double click brings up another userform with a calendar control. How do you idenitfy which textbox called up the calendar?
View 9 Replies
View Related
Jan 23, 2007
I have just started out learning vb and am having some trouble with a particular request. The following code is code I found to split a worksheet into different sheets based on a variable in the data (Col G). It has now been requested that instead of new worksheets, they want the data in new work books, automatically named and saved as today's date.
Sub UpDate_Sheets()
Dim ws As Worksheet, source As Range, dest As Range
Dim daily As Worksheet
Set daily = Worksheets("Sheet1")
Application. ScreenUpdating = False
On Error Resume Next
For Each ws In Worksheets
If ws.Name <> daily.Name Then
daily.Range("G1"). AutoFilter Field:=7, Criteria1:=ws.Name
Set source = daily.Range("G1"). CurrentRegion.Offset(1, 0).SpecialCells(xlVisible)
Set dest = Worksheets(ws.Name).Range("A65536").End(xlUp).Offset(1, 0)
source.Copy dest
End If
Next
daily.Range("G1").AutoFilter
On Error Goto 0
End Sub
View 4 Replies
View Related
Aug 10, 2006
how does one use a single scrollbar control to change the scroll position of two textboxes simultaneously?
The reason why this is required is because the textboxes are both multilines and the data in each is related. So there isn't much point in the user scrolling through textbox1 and then trying to find the same scroll position in textbox2 by changing it's scrollbar.
I've tried changing the Curline property of the textboxes within the scrollbar change event but this is obviously a poor method as it involves changing the focus every time the user scrolls...
View 7 Replies
View Related
Jul 16, 2014
I have combobox filled with range of two columns , i want somehow to show them both in linked cell , I don't figure it out , by myself using BoundColumn option and it showing first or second column only.
View 4 Replies
View Related
Dec 6, 2012
I am trying to populate a large data table with data sourced from multiple tabs.
Each of the tabs is, for the most part uniform.
They have column labels of "Invoice Number", "Schedule Dates," and "Amount". Their cell references are A6, B6, and C6, respectively.
Is there any way to congregate this data into one massive data table? It doesn't matter the order of the data table. I will be using sort/sumifs/pivot tables to analyze the data.
I cannot copy and paste as there is too much data that changes on a daily basis.
View 1 Replies
View Related
Jan 29, 2010
I am adding a sheet with a graph I made. There are two sheets, the first with the graph, the second with tables. What I would like to do is populate the graph based off what is entered into the tables. My main goal is to get the cells in the cells in the graph for each day to fill in color between the given time frame entered in on the table. Obviously I would be rounding up or down to make the time end in ":00."
The color I would like to fill the graph with is shown on the graph sheet. Also, if anyone can actually get this to work (I honestly wouldn't know where to start) Is there a way to have multiple colors and a possible overlay of colors?
Lets say on tuesday I have 10:00-15:00, and 12:00-18:00. Can I have two colors populate the cells and a thirs color populate the cells in the overlay which would be 12:00-15:00?
View 4 Replies
View Related
Mar 31, 2008
I have two worksheets. The first contains a list of software (some having duplicate listings) in column A and a list of comments in column B. None of the software titles that have duplicates will have comments.
The second worksheet contains a condensed list of software (the previous list without the duplicates) and a column for the comments.
I need to have a formula that populates the second worksheet comments cells with the corresponding comments from worksheet one only if:
(1) The software title in worksheet two matches the software title in worksheet one
(2) The comment cell in worksheet one contains a comment (or text)
I have had only partial success; my obstacle being the duplicate software titles in worksheet one.
View 10 Replies
View Related
Aug 19, 2011
i have generated a list of "Companies on the ASX" (Australian Stock Exchange)
There are several work sheets (all populated from data queries) of companies within different sectors e.g all companies within the "energy" sector and so on (one sheet for each sector)
i am trying to populate a master list of all the companies from all of the sectors however there are some conditions i am having trouble meeting...
1. it has to reflect the exact data on the "sector page" after the Query has been refreshed.
2. i have left some formated rows to allow for new listings as the Query updates so i need it to copy each company from each page, something like..
"Energy" Copy A2:K2 - A5000:K5000 (stopping at row 2500 if that is where the last company is on that list, then the same for the next sheet.)
View 9 Replies
View Related
May 6, 2013
I am attempting to populate multiple rows in one column with data from another table. I need to get the correct street address using multiple values, i.e. first name, last name and city, as some of the names double up.
Is there a way to do this? I have pasted below an example of what I need done as reference.
Last Name
First Name
Address
[Code]....
View 4 Replies
View Related
Jun 24, 2008
I am taking a range of cells (C22:D67) on several sheets ( same cells on each sheet) 4 sheets in total, each range appears in it's own text box on the single user form.
- I would like to know if there is an easier way of doing this, and can I leave out the cells without anything in them?
The code I am using at the moment is..
Private Sub cmdSeeNotes_Click()
Sheets("Core").Activate ....
View 9 Replies
View Related
Apr 9, 2014
I'm working in one workbook with 2 sheets.
sheet 1 have simple values, for example
cell A1:5
Cell A3: 10
Cell A5:15
Cell A7:20
Cell A9:25
Cell A11:30
Cell A13:35
Cell A15:40
In sheet 2 i have the following formulas:
Sheet 2 Cell A1: =Sheet1!A1+Sheet1!A3
Sheet 2 Cell A2: =Sheet1!A5+Sheet1!A7
I need to respect this sequence when copying these 2 formulas in the same sheet 2 cell A3, however when I do that I get the following formula: =Sheet1!A3+Sheet1!A5. While i need it to sum up A9 and A11. i.e respect the order of the first 2 formulas.
View 3 Replies
View Related
Dec 3, 2009
i have 2 userforms one with textboxes and the other one with listbox and textboxes.
Everytime user input their data(ie:first name, last name, address etc) in the first form the data's going to be saved in Worksheet("customerSheet") and later on to be displayed in the second form. using the listbox you can select the customer's name and the customer info will be displayed in the textboxes.
here's my code in second form
Private Sub UserForm_Initialize()
Worksheets("CustomerSheet").Activate
Range("A1").Select
'ActiveCell.CurrentRegion.Name = "Database"
'Selection.End(xlDown).Select
'ActiveCell.address(False, False)
viewCustomerBox.RowSource = "A2:A15"
End Sub
View 9 Replies
View Related
Nov 21, 2005
I have a worksheet that has 6 columns of numerical data that all column
datasets are referenced together for each row. So for example the data
in row 5 in all colums is related.
Column C through F have 4 numbers that refer to the data in the first 2
columns. These are also ordered by row.
I need to look in column A for 0.00, and column B for 3.14 Both of
these must be in the same row or I need the closest value. When these
values are found in columns A & B, return the values from the same row
in Columns C through F.
View 13 Replies
View Related
