Aligning Multiple Textboxes And Make Same Height For All?

Mar 17, 2012

I have 35 text boxes to add to the bottom of a chart. Is there no way to mark multiple boxes and align them to the left or right or make them all the same height?

View 2 Replies


Scale Height & Widths Of All Textboxes On A Worksheet

Sep 6, 2007

I have numerous Text Boxes on my worksheet. The number of these objects vary, as many will be continually duplicated/ deleted.

The code below is a simple recording of selecting each object and scaling.

VB: AutoLinked keywords will cause extra spaces before keywords. Extra spacing is NOT transferred when copy/pasting, but IS if the keyword uses "quotes" ...

View 9 Replies View Related

How To Make MyItem Bold Inside The Textboxes

Jul 19, 2014

myItem = "Big"

myText.Text = myItem & " houses are " & myItem

Is it possible to make myItem bold inside the textboxes? If so, how?

View 4 Replies View Related

Aligning Across Multiple Columns?

Feb 27, 2013

I have a spreadsheet with an example attached. There is data in multiple rows across multiple columns but not all rows and columns have info in every cell. I would like all the information to align to the far left column but stay in their respective columns.

View 7 Replies View Related

Method For Aligning Multiple Conditions With A Predetermined Outcome

Dec 8, 2009

See example attached. I am building a form where a user need to provide different criteria to receive a specific hourly rate. Conditions are:-

1. Age
2. A / B / C / D
3. Weekend (W) or Mid Week (M)

There are 4 age groups, 4 categories (A,B etc) and 2 Daily rates, therefore there are 32 different possible rates. I have considered nested if statements but I think this would be a very long formula - is this the only answer?

View 4 Replies View Related

Finding The Column With The MAX Height In Comparson Wth Othr Columns Of UNEVEN Height

Feb 24, 2009

Finding the Column with the MAX Height in comparison with other Columns of UNEVEN Height

I need two things :

1. I have several columns starting from Column B till Column F, each column having values starting from the third ROW.


Lets say Column B contains two values in B3 and B4, Col C three values in C3 C4 and C5, Col D four values D3,D4,D5 and D6, Col E two values in E3 and E4, Column F five values F3,F4,F5,F6 and F7.

So, the answer is F3:F7.

2.I am using 10^{4,3,2,1,0} in a particular portion of a formula, Now the number of elements in the array or in the Curly Braces depends on the number of Columns filled from Column B as explained in the Point 1.

Now, since I have five columns under consideration I have this order as mentioned here {4,3,2,1,0} , I would like to know whether I could make this dynamic, as in if there were only four columns then this would be {3,2,1,0} and if more this array could self-fill and expand..

If that's possible, then how do we use it in the formula, Is it by the virtue of the INDIRECT function?

View 14 Replies View Related

Multiple UserForms With Multiple Numeric Data Input TextBoxes

Sep 25, 2008

When one creates multiple UserForms with multiple (identical) TextBoxes, every control must have its own event handler procedures. All these TextBoxes in my workbook are to capture numeric data to populate various cells in the workbook.

Would you recommend using a Class Module to handle these events for TextBox controls, rather than having to repeat the event handler code for each control?

And if so, do you have some code that I can use that will cover most of the events and potential error handling routines for numeric input data?

View 9 Replies View Related

Multiple Textboxes

Nov 7, 2003

I have a number of textboxes, or other boxes, using exactly the same code. In visual basic you can assign an index to these boxes and create one code where the index number specifies the box you are working with.

I have tried finding a way to do thing in VBA, but came up against a blank. I realise that this is either not possible or very simple, but right now I am stuck with the 'not possible'. Does anyone know if the 'very simple' is an option. It would greatly decrease the size of my program, make it easier to visualise and not make me change to much each time.
Of course I refer to subs as much as possible making these routines 3 line routines (sub-call-endsub), but still there are a lot of textbox1_click() routines whereas textbox_click(index) would be nicer.

View 9 Replies View Related

Validation Of Multiple Textboxes

May 15, 2006

I have 2 textboxes, wherein I want them to be validated for Only numeric entries, and also that they should not be empty.

I can write 2 procedures for that, but then thats efficient coding...
In the attached worksheet,
step 1) select M+R in column 2
Step 2) make some entries in the 2 textboxes.

I have written some code, but thats not working...

View 5 Replies View Related

Total Sum Of Multiple TextBoxes

Jun 10, 2008

My userform requires a user to enter amounts in 5 different textboxes.(textbox1-5) I have created a textbox6 to attempt to capture the totals (should be numerical) of textboxes1-5, even if this textbox figure is a 0 or a minus figure. I have browsed a few other posts with roughly the same issue and have come up with some basic code as per below... the code is pasted into each (textbox 1-5) textbox_change() code.

If TextBox1.Value = "" Then Exit Sub
If TextBox2.Value = "" Then Exit Sub
If TextBox3.Value = "" Then Exit Sub
If TextBox4.Value = "" Then Exit Sub
If TextBox5.Value = "" Then Exit Sub
TextBox6.Value = CDbl(TextBox1.Value) + CDbl(TextBox2.Value) + CDbl(TextBox3.Value) + CDbl(TextBox4.Value) + CDbl(TextBox5.Value)

View 6 Replies View Related

Right-Click Menu With Multiple Textboxes

Dec 10, 2009

I created a right-click menu for userform textboxes from a code I found through googling. It works perfect, however, I don't know how to get it to work for more than one textbox.

Here's the code for the userform:

View 10 Replies View Related

VBA Shortcut For Renaming Multiple TextBoxes

Jan 9, 2010

Is there a shortcut to rename multiple TextBoxes?

So far I've been renaming each individual TextBox manually. This takes forever...

I have a lot of TextBoxes & hope there is a faster/easier solution.

TextBox1 --> OtherName1
TextBox2 --> OtherName2
TextBox3 --> OtherName3
TextBox4 --> OtherName4
TextBox5 --> OtherName5
TextBox6 --> OtherName6
TextBox7 --> OtherName7
TextBox8 --> OtherName8
TextBox9 --> OtherName9
TextBox10 --> OtherName10

View 9 Replies View Related

Multiple Textboxes: Multipage UserForm

Nov 2, 2006

re: Validating Textbox to work on a simple form.)

View 2 Replies View Related

Fill Multiple UserForm TextBoxes

Dec 30, 2006

I have a form using in Excel 2003 that's 5 columns and 20 rows I need to populate the Textboxes with values from a worksheet. I want to use a loop statment that fills the first row, then increments to the next row until all 20 are filled. I have named each row the same name except the last character is the row number 1-20.

ie on the form textboxes named:

NameRow1 AddressRow1 CityRow1 StateRow1 ZipRow1
NameRow2 AddressRow2 CityRow2 StateRow2 ZipRow2

This is what I want to happen

Sub test()
Dim RowNumber As Integer
Dim FormRow As Integer
Dim NameRow As Object
Dim AddressRow As Object
Dim CityRow As Object
Dim StateRow As Object
Dim ZipRow As Object
RowNumber = 3 'Row in Data sheet
FormRow = 1 'Row on form
NameRowString = "NameRow" 'first part of the named object
Do While FormRow < 21
NameRowVar = NameRowString & FormRow................

View 2 Replies View Related

Format Multiple Userform TextBoxes

Jun 13, 2008

When opening up a userform I'm attemping to change the value of a range of textboxes ( 6 to 18) to 0.00.

To do so I used the following code which is controller by a command button

Private Sub CommandButton1_Click()

Dim i As Integer
For i = 6 To 18
userform1.textbox(i).value = format(0,"#,##0.00)
Next i
End Sub

It keeps stalling at "textbox(i)"

A simple solution I'm sure.
Simple problem I'm

View 9 Replies View Related

Format Multiple Textboxes At One Time On Initialize

Feb 6, 2014

I have a total of 648 textboxes on my form. Some of the textboxes allow for char values, some numeric and some monetary. The problem I am running into is with the monetary. I am trying to say on initialize, I want to autoformat 208 of these textboxes to $0.00 and when the users puts in an actual amount it changes to $100.00 or whatever the amount. It would be ideal to just have the textbox blank and when the users puts in something it is formatted automatically to $100.00. Just like I would if I were formatting an Excel column or cell. Here is my code so far: (hopefully no typos in code. Cannot copy and paste as using home computer. My work computer blocks the excelforum site.


View 6 Replies View Related

Linked Comboxes Populating Multiple Textboxes

Oct 17, 2009

I have a user form with:
ComboBox 1
ComboBox 2
Text Boxes 1 - 12

ComboBox 1 runs through a sheet range and removes the duplicates values
ComboBox 2 is linked to Cbx1 and is populated with the second column of that range, depending upon Cbx1's value.

Trying to populate the twelve Text Boxes with the remaining row of values. To program those boxes to clear each time either Cbx 1 or Cbx 2 is changed. This is the section of code I can't make work properly. I don't raise any errors, but the TextBoxes remain blank none the less.

View 2 Replies View Related

Multiple Textboxes - Common Event Procedure

Apr 27, 2006

I have a userform with about 20 textboxes. I would like to use the same "data validation" procedure on each textbox as the user enters data into the form. I'll use the exit event to trigger the validation. As the user moves from one textbox to the next, the data will be validated; if it's out of range, the user will be prompted to correct it.

Is there a way to have a common event procedure so I don't have to have a separate procedure for each textbox individually? I know I can put the actual validation code in its own procedure and then call it from each event procedure but that would still leave me with 20 event procedures like:

Private Sub Textbox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
End Sub

View 7 Replies View Related

Generating Multiple Textboxes With Relative Position

Apr 2, 2007

I am trying to create a form with a text box that when text is entered, it adds to the userform another textbox with that data in it. The focus then goes back to the original textbox so that more may be added indefinitely, all with relative position to the most recently added textbox. Here is what I have so far, works for one time, but not multiple textboxes. The original textbox is "txtAPID"

Private Sub MakeNewTextBox()
Dim newTextBox As TextBox
Dim ControlTop As Long
With LastAirport
ControlTop = 30
End With
Set newTextBox = Me.Controls.Add("Forms.TextBox.1", "txtNextAirport", True)
With newTextBox
.Left = 20
.Top = ControlTop + 3
.Height = 15
.Text = txtAPID.Text
End With....................

View 2 Replies View Related

Single Calendar Control To Multiple Textboxes

Jun 11, 2007

Have a slick way to have multiple textboxes on a userform updatable by a single calendar control located on it's own userform.

basically, i have a userform with multiple textboxes. A double click brings up another userform with a calendar control. How do you idenitfy which textbox called up the calendar?

View 9 Replies View Related

Single Scrollbar To Scroll Multiple Textboxes Simultaneously

Aug 10, 2006

how does one use a single scrollbar control to change the scroll position of two textboxes simultaneously?

The reason why this is required is because the textboxes are both multilines and the data in each is related. So there isn't much point in the user scrolling through textbox1 and then trying to find the same scroll position in textbox2 by changing it's scrollbar.

I've tried changing the Curline property of the textboxes within the scrollbar change event but this is obviously a poor method as it involves changing the focus every time the user scrolls...

View 7 Replies View Related

Fill Userform Textboxes With Text Combined From Multiple Cells

Jun 24, 2008

I am taking a range of cells (C22:D67) on several sheets ( same cells on each sheet) 4 sheets in total, each range appears in it's own text box on the single user form.

- I would like to know if there is an easier way of doing this, and can I leave out the cells without anything in them?

The code I am using at the moment is..

Private Sub cmdSeeNotes_Click()

Sheets("Core").Activate ....

View 9 Replies View Related

2 Userforms One With Textboxes And The Other One With Listbox And Textboxes

Dec 3, 2009

i have 2 userforms one with textboxes and the other one with listbox and textboxes.

Everytime user input their data(ie:first name, last name, address etc) in the first form the data's going to be saved in Worksheet("customerSheet") and later on to be displayed in the second form. using the listbox you can select the customer's name and the customer info will be displayed in the textboxes.

here's my code in second form

Private Sub UserForm_Initialize()

'ActiveCell.CurrentRegion.Name = "Database"
'ActiveCell.address(False, False)

viewCustomerBox.RowSource = "A2:A15"

End Sub

View 9 Replies View Related

Aligning Columns With Same Data?

Feb 22, 2007

How do I sort out columns aligning them to match data in another column?

Column B is 200 rows long all with data such as FLEZ054246. Columns C is 100 rows long but it will match some from B. I need to align C,D,E with B as long as C & B match. The rows that don't match can be left open for C, D, E.

Column B Column C Column D Column E

View 8 Replies View Related

Aligning Data According To 2 Columns?

Apr 30, 2013

aligning some data. Cupno has more entries than seqno and there are duplicate entries. I cannot think of a way to get seqno+results to align with cups. If it's possible to delete rows the don't have a corresponding seqno thats ok too. I've attached the example workbook. Sheet1 is the data and Sheet2 contains what ideally the results should look like

View 2 Replies View Related

Aligning Text File In VBA

Mar 20, 2014

My application is in vba and I want to log information in text file which required four columns. The tool should open the log file and log the issue and close the file immediately so that other processes running in parallel could also post the issues to it without loss of data. Keep appending to the log file.

Log file should look like: LogFile.txt

View 9 Replies View Related

Aligning Data By Date

Dec 31, 2008

Column A contains the date, every day since 1/2/07 to present
Column B contains a value for that date
Column D has dates within the range in Column A but at odd days (e.g. 4/2/07, 10/2/07)
Column E has data which corresponds to the date in Column D.

Can anyone advise of a formula which can allow me to put the data in Column E in line with the dates on column A rather than the dates in column D?

I want to have in Column C values from Column E that match with the dates in Column A, so for example next to 1/2/07 the cell would be empty but next to 4/2/07 in column A would be the value corresponding with that date in columns D & E.

View 9 Replies View Related

Aligning Columns With Same Data

Feb 22, 2007

How do I sort out columns aligning them to match data in another column?

For instance.

Column B is 200 rows long all with data such as FLEZ054246. Columns C is 100 rows long but it will match some from B. I need to align C,D,E with B as long as C & B match. The rows that don't match can be left open for C, D, E.

Column B Column C Column D Column E

I need it too look like this:

Column B Column C Column D Column E

View 6 Replies View Related

Search Worksheet For Data In Multiple Textboxes On Userform - Display In Temp Worksheet

Dec 23, 2013

I have a workbook with 4 worksheet that store different type of data. It also has a userform that load at start of the application which is to search the data in the workbook. The userform has a combobox where the names of the sheets are stored. when the user selects say Sheet2 in the combobox, it enables the relevant textboxes on the userform and activates the worksheet at the change event. The userform has a search button that searches all the worksheets based on the text entered in a textbox.

The problem: how to search based on 1 textbox. What I want is: say for e.g the end-user selects sheet2 from the combobox, this intern enables 4 textboxes (Name, DOB, Nationality, ID #) on the userform. The end-user should have the liberty to enter data in 1 and/or any of the textboxes. The search should be performed, that if data is only in 1 of any of textboxes then give all rows that fit that criteria and display in a temp worksheet. if say the name and dob is filled by the user than what matches both should be displayed in a temp worksheet. if say dob, name and ID# given so the search button should narrow down to fit all 3 criteria and then display result in temp worksheet. As if mentioned data can be entered in either just 1 or any or all textboxes.

E.g. the worksheet is (Columns are Name, Nationality, DOB, ID#)

row 1 = name: Steven Martin, DOB: 27-may-1993, Nationality: Trinidad & Tobago, ID #: 1234567
row 2 = name: Gary Richards, DOB: 2-FEB-1993, Nationality: British, ID #: 456789
row 3 = name: David Cohen, DOB: 27-May 1993, Nationality: American, ID #: 98765
row 4 = name: Roberto McDonalds, DOB 21-Jul-1962, Nationality: British, ID # 654321
row 5= name: Gary Richards, DOB: 01-Dec-1978, Nationality: Australian, ID # 1234567

Now if the user enters only name as "Gary Richards" and search then row 2 and 5 should be displayed in a temp worksheet. if user enters name Roberto McDonald and ID# 1234567 then it should not display anything. if user enters DOB 27-may-1993 and nationality British and ID # 1234567 then as well shouldn't display anything and should a msgbox "no data found".

View 4 Replies View Related

Financial Data - Graph Not Aligning

Jan 18, 2014

I work on graphics which show financial data. The base is day data together with calculated added values the graphic worked and showed good pictures.

But now I encountered a problem with the graph - related to not listed days, points are "generated" which do not be in line with the rest of the data !?


View 1 Replies View Related

Copyrights 2005-15, All rights reserved