Single Scrollbar To Scroll Multiple Textboxes Simultaneously
Aug 10, 2006
how does one use a single scrollbar control to change the scroll position of two textboxes simultaneously?
The reason why this is required is because the textboxes are both multilines and the data in each is related. So there isn't much point in the user scrolling through textbox1 and then trying to find the same scroll position in textbox2 by changing it's scrollbar.
I've tried changing the Curline property of the textboxes within the scrollbar change event but this is obviously a poor method as it involves changing the focus every time the user scrolls...
View 7 Replies
ADVERTISEMENT
May 23, 2013
I have a spreadsheet that has relatively clean data, but at the end of every row is a long notes fields (often filled with several paragraphs of text). I'm trying to search inside each one of those notes to see if it contains certain boilerplate language / legalese / key words.
If I was just looking for one word, it would be easy -- I would write =IFERROR(IF(SEARCH("keyword",E2)>0,"Yes",""),""). That way, if the keyword is present, it returns "Yes", and if it's not present, it returns a blank.
What I want to do, though, if look for a long list of keywords simultaneously, and if ANY of those keywords are present, have it return a "Yes".
So I could do something like =IFERROR(IF(or(SEARCH("keyword1",E2)>0,SEARCH("keyword2",E2)>0,SEARCH("keyword3",E2)>0,SEARCH("keyword4",E2)>0)),"Yes",""),""), but that seems horribly inefficient. Especially since my list of keywords is likely to change over time.
So what I want it to do is search each cell by simultaneous reference to an ever-changing table of keywords (call it [KeywordTable]). And I can't figure out how to do that. The search function is resisting all of my efforts to put multiple search values / a range of words inside of it.
To reiterate: the goal is to look at one cell filled with text, ask "does the text in that cell contain any of the keywords contained in [KeywordTable]", and if the answer is "Yes" return yes, and if the answer is no return no (or blanks).
View 7 Replies
View Related
Jun 4, 2009
I have a workbook containing about 20 sheets. I need to find a way of pasting all the numbers in the A column in each sheet (sheets 1-20) to the last sheet so I get a great big list of all the numbers in the 20 sheets. How would I go about doing this?
Right now I'm cutting and pasting from sheet 1 to my last sheet, then from sheet 2 to my last sheet, then from sheet 3 to my last sheet... Is there a quicker way? The ranges in each of the sheets start at A2 and go down a few cells. Sheet 4 might have 4 numbers in the A column, sheet 12 might have 47, sheet 17 might have 8 and so on.
How would I go about getting all the A columns in the sheets to the last sheet?
I'll throw up a few screenshots if the problem is unclear
View 9 Replies
View Related
Dec 8, 2006
I have a workbook of 6 Sheets, what i want is that if i scrolled or zoomed one of the sheets i want all other sheets to be scrolled and zoomed accordingly identically.
to explain more: say I'm on "sheet1" and I scrolled down so i'm seeing range(K225:X250), now if i switched to any of the other sheets i want them all scrolled to the same range. so whatever sheets i choose i want to see range(K225:X250) in the same viewing properties "zooming".
View 9 Replies
View Related
Jun 11, 2007
Have a slick way to have multiple textboxes on a userform updatable by a single calendar control located on it's own userform.
basically, i have a userform with multiple textboxes. A double click brings up another userform with a calendar control. How do you idenitfy which textbox called up the calendar?
View 9 Replies
View Related
Jul 6, 2011
I need to copy information from one excel file and paste it into the same location (A1-A1, B6-B6, etc) in many other files all at once. Essentially I have several thousand files that need to be updated right now. I need to copy and paste both the cell contents and the formatting.
View 1 Replies
View Related
Nov 2, 2011
I am trying to use Vlookup and match on a large volume of data. The Vlookup true function was having trouble when an exact match occurred. I changed the table to allow for all options (sizes in this case) but the Vlookup with false came up with #N/A. The Vlookup key was the result of a formula. I then typed the same data and the formula was successful. I then copied and pasted Value the entire contents of the cell. I still received the #N/A. I then pressed [F2] to edit the cell and then pressed enter and this was successful. I have over 60,000 cells to edit and can not do manually. Any macro run the [F2] function on a range of cells or another way.
View 9 Replies
View Related
Jul 17, 2013
I have a workbook with a list of drawing numbers (with customer, date, author etc.). New drawing numbers and their associated row of information are entered onto the sheet...
..HOWEVER, multiple users can be at least viewing and potentially entering information simultaneously.
I have written code where multiple people can view the same read only file, but not edit it and it be updated.
It seems quite unlikely, but is there anyway of 'live' updating a workbook whilst multiple people are viewing it? Or at least notifying other users when the sheet has been updated?
View 2 Replies
View Related
Nov 2, 2006
See the file attached (there are the same columns on all sheets, apart from on "BLANK"). The "Sort" sheets 1-4 contain rows that are repeated various times on the "Raw data" sheets. The "Sort" sheets are mutually exclusive; there is no repetition of rows among them. When I make an entry into an "ACTION" or "REASON" cell on any of the "Sort" sheets, I want that entry to be replicated on all identical rows throughout the "Raw data" sheets. Matching of the rows is to be via Criteria 1 and 2. I would preferably like the replication to be as I make the entries.
I am currently looking into writing a private sub for each "Source" worksheet. This would activate when a change was made to that sheet's ACTION and/or REASON cells, group that sheet with the three "Raw data" ones and change the relevant cells/rows (assuming that finding the relevant cells/rows within this function is possible). Or the macro could just loop through the rows of the three "Raw data" sheets and copy IF, but this would be long. Does this sound like the way forward or am I barking up the wrong tree? Should I be looking into VLOOKUP or pivot tables? Or is my data structured badly in the workbook from the outset? How straightforward will this macro be? Has anyone any pointers, magic routines in their libraries or links to relevant info?
View 5 Replies
View Related
Jan 3, 2012
I am trying to sort each "Pct" column in descending order. Of course, I can do this manually, but I have over 100 to do, so I'd like to know how I can automate this (of course, the two columns to the left of "Pct" must move along with it).
delete
EFGHIJKLMNOPQ8BallFrqPct
BallFrqPct
[Code]....
View 2 Replies
View Related
Aug 23, 2012
Is there any way to do this part of code without calling out each element individually?:
VB:
Dim aSequence(7, 1) As Integer
'setup Evaluation sequence
aSequence(0, 0) = -1
[Code]......
View 2 Replies
View Related
Feb 2, 2013
My Workbook contains several UserForms in which employees will be entering hours and activities on a daily basis. In the UserForm, they select their department and enter hours for each specific type of work/activity that shows up for that department in the userform. They click the submit button and all the data (date, name, department, type of work and hours) is added to a database table in another sheet, which in turn feeds a number of reports.
I need to be able to have anywhere from 20 to 100+ employees enter their hours on a daily basis, many of them at the same time, all from different locations (within the network of the client's system), using the same UserForms.
We've experimented with Google Drive, but that seems not to be the solution. It kind of works, but is not secure (it installs a copy of the entire workbook on the users system and then synchs the data back to the server upon "save") and way too cumbersome. I've heard of SharePoint, but not every client has that installed (and frankly I don't know how it works).
View 3 Replies
View Related
Sep 25, 2008
When one creates multiple UserForms with multiple (identical) TextBoxes, every control must have its own event handler procedures. All these TextBoxes in my workbook are to capture numeric data to populate various cells in the workbook.
Would you recommend using a Class Module to handle these events for TextBox controls, rather than having to repeat the event handler code for each control?
And if so, do you have some code that I can use that will cover most of the events and potential error handling routines for numeric input data?
View 9 Replies
View Related
May 8, 2006
Find Multiple instances of Numeric Criterion in Row & Return To a Single
Column.
I have a Dynamic Named Range "Data" spanning 10 Columns and many Rows.
Each Row may contain duplicates of the Numeric Criterion.
I would like to find ALL instances of a specific Numeric Criterion across
each single Row in the Dynamic Range "Data" and have the Results returned to
a New Sheet in a single column.
NEW Sheet:
The Numeric Criterion is housed in G5.
The matched criterion should be returned to the New Sheet starting at G7.
Duplicate instances in the same Row should ALL be returned to the same cell
in Column G on the New Sheet.
Sample Data Layout:
Columns I J K L M N O P Q R
Row No.76 1 0 1 1 0 1 1 1 0 1
Row No.77 2 2 3 2 1 2 2 0 0 0
Row No.78 3 3 3 3 3 0 3 0 3 0
Scenario:
Looking for Numeric Criterion 1 (one).
Expected Results - New Sheet:
Row No.7 Column G (Cell G7) 1111111
Row No.8 Column G (Cell G8) 1
In Row 76 of the Sample Data ALL seven Numeric Criterion of 1 (one) should be
returned to the same cell G7.
In Row 77 of the Sample Data there is only one Numeric Criterion of 1 and it
should be returned to cell G8.
View 14 Replies
View Related
Nov 7, 2003
I have a number of textboxes, or other boxes, using exactly the same code. In visual basic you can assign an index to these boxes and create one code where the index number specifies the box you are working with.
I have tried finding a way to do thing in VBA, but came up against a blank. I realise that this is either not possible or very simple, but right now I am stuck with the 'not possible'. Does anyone know if the 'very simple' is an option. It would greatly decrease the size of my program, make it easier to visualise and not make me change to much each time.
Of course I refer to subs as much as possible making these routines 3 line routines (sub-call-endsub), but still there are a lot of textbox1_click() routines whereas textbox_click(index) would be nicer.
View 9 Replies
View Related
Mar 21, 2008
I have a text file containing internet explorer browser history. The file has data in the following format (in Excel all data is in 1 column): ...
View 9 Replies
View Related
May 15, 2006
I have 2 textboxes, wherein I want them to be validated for Only numeric entries, and also that they should not be empty.
I can write 2 procedures for that, but then thats efficient coding...
In the attached worksheet,
step 1) select M+R in column 2
Step 2) make some entries in the 2 textboxes.
I have written some code, but thats not working...
View 5 Replies
View Related
Jun 10, 2008
My userform requires a user to enter amounts in 5 different textboxes.(textbox1-5) I have created a textbox6 to attempt to capture the totals (should be numerical) of textboxes1-5, even if this textbox figure is a 0 or a minus figure. I have browsed a few other posts with roughly the same issue and have come up with some basic code as per below... the code is pasted into each (textbox 1-5) textbox_change() code.
If TextBox1.Value = "" Then Exit Sub
If TextBox2.Value = "" Then Exit Sub
If TextBox3.Value = "" Then Exit Sub
If TextBox4.Value = "" Then Exit Sub
If TextBox5.Value = "" Then Exit Sub
TextBox6.Value = CDbl(TextBox1.Value) + CDbl(TextBox2.Value) + CDbl(TextBox3.Value) + CDbl(TextBox4.Value) + CDbl(TextBox5.Value)
View 6 Replies
View Related
Mar 15, 2013
I wonder if Excel allows scrolling many columns or rows at a time. That's right, I have a worksheet with frozen panes by "D2" cell; then there are sets of 4 columns for each day of the month (for example "D:G", "H:K" and so on). I need when I scroll horizontally, that every first column of the set to snap at the edge of pane at once. In other words, is any elegant way that usual scrolling pace of one column/row at a time to be changed to 4 at a time?
View 3 Replies
View Related
Dec 10, 2009
I created a right-click menu for userform textboxes from a code I found through googling. It works perfect, however, I don't know how to get it to work for more than one textbox.
Here's the code for the userform:
View 10 Replies
View Related
Jan 9, 2010
Is there a shortcut to rename multiple TextBoxes?
So far I've been renaming each individual TextBox manually. This takes forever...
I have a lot of TextBoxes & hope there is a faster/easier solution.
Example:
TextBox1 --> OtherName1
TextBox2 --> OtherName2
TextBox3 --> OtherName3
TextBox4 --> OtherName4
TextBox5 --> OtherName5
TextBox6 --> OtherName6
TextBox7 --> OtherName7
TextBox8 --> OtherName8
TextBox9 --> OtherName9
TextBox10 --> OtherName10
View 9 Replies
View Related
Nov 2, 2006
re: Validating Textbox to work on a simple form.)
View 2 Replies
View Related
Dec 30, 2006
I have a form using in Excel 2003 that's 5 columns and 20 rows I need to populate the Textboxes with values from a worksheet. I want to use a loop statment that fills the first row, then increments to the next row until all 20 are filled. I have named each row the same name except the last character is the row number 1-20.
ie on the form textboxes named:
NameRow1 AddressRow1 CityRow1 StateRow1 ZipRow1
NameRow2 AddressRow2 CityRow2 StateRow2 ZipRow2
This is what I want to happen
Sub test()
Dim RowNumber As Integer
Dim FormRow As Integer
Dim NameRow As Object
Dim AddressRow As Object
Dim CityRow As Object
Dim StateRow As Object
Dim ZipRow As Object
RowNumber = 3 'Row in Data sheet
FormRow = 1 'Row on form
NameRowString = "NameRow" 'first part of the named object
Do While FormRow < 21
NameRowVar = NameRowString & FormRow................
View 2 Replies
View Related
Jun 13, 2008
When opening up a userform I'm attemping to change the value of a range of textboxes ( 6 to 18) to 0.00.
To do so I used the following code which is controller by a command button
Private Sub CommandButton1_Click()
Dim i As Integer
For i = 6 To 18
userform1.textbox(i).value = format(0,"#,##0.00)
Next i
userform1.show
End Sub
It keeps stalling at "textbox(i)"
A simple solution I'm sure.
Simple problem I'm
View 9 Replies
View Related
Feb 6, 2014
I have a total of 648 textboxes on my form. Some of the textboxes allow for char values, some numeric and some monetary. The problem I am running into is with the monetary. I am trying to say on initialize, I want to autoformat 208 of these textboxes to $0.00 and when the users puts in an actual amount it changes to $100.00 or whatever the amount. It would be ideal to just have the textbox blank and when the users puts in something it is formatted automatically to $100.00. Just like I would if I were formatting an Excel column or cell. Here is my code so far: (hopefully no typos in code. Cannot copy and paste as using home computer. My work computer blocks the excelforum site.
[code]....
View 6 Replies
View Related
Oct 17, 2009
I have a user form with:
ComboBox 1
ComboBox 2
Text Boxes 1 - 12
ComboBox 1 runs through a sheet range and removes the duplicates values
ComboBox 2 is linked to Cbx1 and is populated with the second column of that range, depending upon Cbx1's value.
Trying to populate the twelve Text Boxes with the remaining row of values. To program those boxes to clear each time either Cbx 1 or Cbx 2 is changed. This is the section of code I can't make work properly. I don't raise any errors, but the TextBoxes remain blank none the less.
View 2 Replies
View Related
Mar 17, 2012
I have 35 text boxes to add to the bottom of a chart. Is there no way to mark multiple boxes and align them to the left or right or make them all the same height?
View 2 Replies
View Related
Apr 27, 2006
I have a userform with about 20 textboxes. I would like to use the same "data validation" procedure on each textbox as the user enters data into the form. I'll use the exit event to trigger the validation. As the user moves from one textbox to the next, the data will be validated; if it's out of range, the user will be prompted to correct it.
Is there a way to have a common event procedure so I don't have to have a separate procedure for each textbox individually? I know I can put the actual validation code in its own procedure and then call it from each event procedure but that would still leave me with 20 event procedures like:
Private Sub Textbox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
ValidateData
End Sub
View 7 Replies
View Related
Apr 2, 2007
I am trying to create a form with a text box that when text is entered, it adds to the userform another textbox with that data in it. The focus then goes back to the original textbox so that more may be added indefinitely, all with relative position to the most recently added textbox. Here is what I have so far, works for one time, but not multiple textboxes. The original textbox is "txtAPID"
Private Sub MakeNewTextBox()
Dim newTextBox As TextBox
Dim ControlTop As Long
With LastAirport
ControlTop = 30
End With
Set newTextBox = Me.Controls.Add("Forms.TextBox.1", "txtNextAirport", True)
With newTextBox
.Left = 20
.Top = ControlTop + 3
.Height = 15
.Text = txtAPID.Text
End With....................
View 2 Replies
View Related
Nov 26, 2007
I am using the toolbox/ properties method to restrict the scroll area in the sheets of my workbook. However, for some sheets when i keep the right hand arrow pressed, the screen will not scroll to the last column. (i.e. the screen display will not move with the selected cell box)
View 2 Replies
View Related
