Populating Data Table From Multiple Tabs
Dec 6, 2012
I am trying to populate a large data table with data sourced from multiple tabs.
Each of the tabs is, for the most part uniform.
They have column labels of "Invoice Number", "Schedule Dates," and "Amount". Their cell references are A6, B6, and C6, respectively.
Is there any way to congregate this data into one massive data table? It doesn't matter the order of the data table. I will be using sort/sumifs/pivot tables to analyze the data.
I cannot copy and paste as there is too much data that changes on a daily basis.
View 1 Replies
ADVERTISEMENT
May 6, 2013
I am attempting to populate multiple rows in one column with data from another table. I need to get the correct street address using multiple values, i.e. first name, last name and city, as some of the names double up.
Is there a way to do this? I have pasted below an example of what I need done as reference.
Last Name
First Name
Address
[Code]....
View 4 Replies
View Related
Jul 12, 2012
I am working with a large table of quite simple data in the following format.
Ref1 SurnameInitialsDOL1 Reference2
Zz719147GLAWSJ07/04/19780271947X
YA414253CDORCE07/04/19870282179F
I need to split up the "master" table so that for all rows where DOL1 falls with a year range of e.g 6th April - 5th April (in any year) then this row is moved or copied into a new tab based on the year range.
i.e. The first row should appear in a new tab for the range 6th April 1978 - 5th April 1979.
The marco should be ale to create and name new tabs. The tab name will be 78_79.
The second row should appear in the 87/88 tab.
I have several thousand rows of data with dates ranging from 1978 - 2012 so there should be tabs populated for every year from 78-2012.
View 6 Replies
View Related
Jul 21, 2013
I have a table thats acting as a database analysing player data and I have a second table in a report sheet based on the database table. In my report table I have a drop down with the player names at the top and I want the data cells underneath to populate based on that particular players data from the database.
View 1 Replies
View Related
Dec 19, 2007
I am trying to link one table 1 with another table 2, and these are in different tabs.
In first table (1) I have to do some calculations, and in the second table (2) I have contacts (name, fax and contact name).
So I want from first table once I write the name of Trade (which I did with data validation to pick only the trades that are in table 2 from A1 to A50) to populate table 1 - columns B with Contact Name and Column C with Fax # and all these data should come from table 2.
I tried with Vlookup but the problem is that I can fill only column B and I need to fill column B and C in the same time?
Is this possible in Excel or the only way is to go to MS Access?
View 9 Replies
View Related
Nov 3, 2013
Ok so I have made a self populating Data Table to show me which employee is on what shift that updates daily from our roster.
This works and it's brilliant, however I want to steam line my finished product further, but haven't been able to find an easy solution.
I have several employees per position and my data table currently self populates so that every employee has their own line. I want to populate it so that all employees with the same position all apear in 1 row across the columns under their current shift.
So this is what my end result currently looks like
Table 1POSITION
SHIFT 1
SHIFT 2
SHIFT 3
POSITION 1
EMPLOYEE 1
POSITION 1
EMPLOYEE 5
[Code] ......
This is how I want it to look.
Table 2POSITION
SHIFT 1
SHIFT 2
SHIFT 3
POSITION 1
EMPLOYEE 1
EMPLOYEE 5
EMPLOYEE 8
[Code] ......
We have upto 250 employees and upto 50 positions so you can understand why I need to stream line the table.
I can not change the roster as it is our orginal data as requires to be set up as it is. When adding a new employee into the roster I must enter them into there designated crew. "inserting a row midway down the original data".
If I use the CONCATENATE formula and add a new employee into the roster "half way down the original data" then it throws out what the CONCATENATE formula is looking up. It looks up the same cell but the names have all moved down by a cell therefore the populated information is wrong.
I am hoping to make my end result look like Table 2 even if it means adding another spread sheet in somewhere between the roster and the end product.
Realisticly I want a Pivot table that produces names not a tally of employees per shift.
View 5 Replies
View Related
Oct 5, 2006
I am trying to take data from one spreadsheet and do a couple of things. First, i need to create a tab for each column and name the tab after the name in row 1. (this code i already have, it is below)
Second, and here is where i need help, i want to put the tab name and corresponding data (all in the same column on the first sheet) onto each tab. Essentially i am just divying up each column on my master sheet into its own tab so that i can do further data analysis.
Sub GenWStabnames2()
'Kemper Ohlmeyer based on code from David McRitchie
Dim cell As Range
Dim newName As String, xx As String
Err.Description = ""
On Error Resume Next
'--cells with numbers, including dates, will be ignored,
For Each cell In Worksheets("Manager list").Range("fund.names")................
View 9 Replies
View Related
Aug 6, 2014
For my project , I am using Excel as a frontend and Access as a backend. Now, I want to write the code in workbook_Open event that will copy data in Column L,M,N,O from Access table. The query should select data from Access table where Date=Todays Date. All the Queue Names and corresponding Queue Numbers are stored in Sheet2 of the attached workbook. In Access table , there are three fields named as Type,Type1,Type2 which make up Queue numbers.
In Sheet1 , There are Queue Names and we have to store Total Batches,Totl Envelopes,total Documents and total Pages for the corresponding Queue Names in Sheet1. SO for this we need to check the Queue Numbers of the Queue names in SHeet2 but in table Queue Numbers are equal to Type & Type1 & Type2.
See attached workbook : WBExcel.xls
View 2 Replies
View Related
Apr 26, 2014
I'm trying to auto populate a calender style sheet in Excel 2010 based on data from a Work Schedule sheet. The work schedule sheet contains a list of jobs, with each row representing a different job. There is a column for the start date (e.g. 25/04/14) and a column for the end date (e.g. 26/04/14). There are other columns which select resources such as people and vehicles. Each resource may appear on any one of several columns for each row, e.g. Site Operative 1, Site Operative 2 etc.
On the calendar sheet, in which one cell represents one day (e.g. 25/04/14), all the dates are shown along the top going right and all the resources are shown on the left going down.
On the calender sheet, in every cell I want a formula that will look at the Work Schedule sheet and see if that particular resource is being used on that particular date. If it does, the cell can display information from another cell such as the job number or job name to which the resource is assigned; if it doesn't, the resource isn't being used so it can display "Free" or "Available".
View 2 Replies
View Related
Jan 18, 2014
In the annual table tab, I want to be able to select a sales person or other field, and create a table that will pull data from all the tabs. For example, if I select the salesperson Kelly, I want it to pull all of the data from January, February, and March, and compile it into a table.
I would want the table to be dynamic also - I want to be able to quickly sum/average all of that salesperson's sales for all months.
View 4 Replies
View Related
Mar 8, 2013
I've only recently ventured into the VBA scripting and am finding it quite exciting. After doing some trivial stuff, I'm trying to work with websites. Currently, I'm trying to pull data off of a website which poses a form which has to be filled first. I've been successful in filling the form and clicking submit, through the code, but the site opens the results in a separate tab in IE. I am unable to make it go to that tab and copy-paste data from there.
Secondly, instead of just blindly copy pasting, it would be better if the data is pasted in a more readable format (as on the website). The following code is plainly copying and pasting the data as-is and hence rendering it unreadable:
VB:
.ExecWB 17, 0
.ExecWB 12, 2
.PasteSpecial Format:="Text", link:=False, DisplayAsIcon:=False
View 1 Replies
View Related
May 6, 2009
I have an excel spread sheet with about 300 tabs. each sheet has the same column fields..I need to pull certain column fields ( the same fields ) out of each tab and export them to another spread sheet.
View 6 Replies
View Related
Sep 10, 2007
I'm not very good with macros and I need to create a macro that copies data from one excel worksheet into multiple other worksheet tabs in the same workbook. I have 8 columns and thousands of rows of data. The spreadsheet is sorted by column E.
In column E, there are about 25 different values going down throughout the spreadsheet. I would like the data for each of these Column E categories to be copied over to a new tab in the spreadsheet with the tab name as the value in E. So in the end there would be the main tab, and then 25 new tabs with the filtered data. Does anyone already have a macro that will do this?
View 9 Replies
View Related
Dec 26, 2012
I have a spreadsheet with 12 tabs, 1 for each month in the year. On each tab I have employee names (column A), followed by the premium they pay for their health insurance (column B). I'm attemting to create a list of each employee and how much they paid for helath insurance over the year. Since employees come and leave thorughout the year, the lists aren't the same on each tab. However, I was able to create a master list of all possible employees and placed this list into a new tab.
I'm vaguely farmiliar with the SUMIF function and I believe that this would be the best approach, or some possibly sort of vlookup.
View 2 Replies
View Related
Sep 3, 2013
I've been asked to compile and sum weekly sales data. The problem is that the data was supplied in 52 separate tabs, for each week of the year (I don't know who on earth thought that would be the most appropriate way to send the data).
Is there any quick way to import all the data from each tab into one worksheet? The data is laid out the exact same way on each tab. All the row and column headings are the same, and in the same cells. Only the numbers are different (obviously).
View 2 Replies
View Related
Jun 29, 2014
I need to combine data from multiple tabs into one tab. I can have up to 5 tabs with data that starts in column B. The number of rows will be different each time.
View 1 Replies
View Related
Jan 14, 2014
I have a summary tab in which I am trying to sum data based on specific variables from 30 other tabs in the worksheet
- In the summary tab, I have months (one year worth) over the top row and consultant names in the first column
- Each other tab represents a project
- I want for consultant 1 in summary tab, to have:
For january, the sum of dollars spent in january in each project (so across all tabs)
Same for february to december.
I have attached an exemple Note that the consultant names will always have the same syntax but will not necessarily be in the same cell in each tab.
View 5 Replies
View Related
Dec 31, 2012
I have imported data into excel arranged as per the following and there are separate tabs per year. I a trying to summarize and phase the balances per client..i.e 07,08,09,10,11,12.
Therefore if client x balance in 2007 = 10, 2008=11, 2009=10, 2010=2, 2011=3 and 2012 = 5 and so on...then total the balance owed as of now and also phase it as illustrated below. I've tried vlook up's?
Client
Code
01Jan07-
31Jan07
01Feb07-
28Feb07
[Code] .....
View 1 Replies
View Related
Feb 3, 2008
I had a friend attempt to help me with this issue but he couldn't figure it out. He suggested that I tried asking around here.
Here is what I am trying to accomplish:
(I am happy to email anybody the spreadsheet to help out with this description)
1. There are two spreadsheets. One spreadsheet with about 25 tabs (one for each store number) and one spreadsheet with one tab and about 1400 lines of information that is sorted by store number. To preface, this 1400 line spreadsheet can be 900 lines one month and 2500 another month, so it fluctuates.
2. From this spreadsheet sorted by store, I will highlight, cut and paste into the corresponding store tab on the first spreadsheet. Also, at any given month, the information fluctuates, it can be 15 lines for one store one month and another month it could be 5.
3. Once I am done cutting and pasting it all into each seperate tab, I have a 26th tab that I am looking to create a button that will then pull all that information into the 26th tab.
I know - first question is why would you want that? You already have all the information from that original spreadsheet. Well, in these store tabs, I have everything perfectly formatted a certain way and I only really cut and paste the information that I need from the 2nd spreadsheet.
I have a spreadsheet that my friend claims he got close to working it out.
Just to add, I would need this button to take into account that the information in each tab fluctuates and also that it is easy to add a tab if I add stores.
View 6 Replies
View Related
May 21, 2014
Is it even possible to create an IF/AND formula that draws data from multiple tabs?
For example,
(assume there are tabs named exactly the same as each of the data entries in column A)
IF A2 = "ARI" then D2 = ARI!H3. Is this possible?
View 14 Replies
View Related
Aug 30, 2012
I have a spreadsheet with multiple data tabs feeding a few summary tabs.
For this question I will deal with one summary tab and two data tabs, one data tab for sales and one data tab for service. On the summary tab, I want to look at vehicles sold during a certain time period-(looking to the sales tab). For each of the records in the sales tab that match the date range, I need to count the repair order activity on the service tab. The key between the summary and sales tab is the sales date, and the key between the sales and service tabs is the vehicle serial number.
I currently have multiple columns on the sales tab to perform the counts from the service tab, thus allowing me to pull the information to the summary tab. Problem is that the spreadsheet has over 2 million calculating cells and tends to take excessive amounts of time to recalc.
View 2 Replies
View Related
Apr 10, 2013
I have 5 cities and each city has a set of data in separate tabs. Right now i have data pulled for all 5 cities in a single sheet but its too cramped up..
I want to use a drop down list (data validation) and if any of the 5 cities are selected in the drop down, the data from that particular city (tab) should be pulled up. This way my sheet size will be reduced 5 time which will look good.
A common v lookup wont work because the data has to be pulled from 5 different tabs for 5 different cities.
View 2 Replies
View Related
Mar 25, 2014
1. The idea is that the macro will start on sheet1, look at column "Jon", copy the values down to the last active cell as well as the dates and paste special values and transpose them onto the "Jon" tab starting in B8 and B9. Each day all of the dates and values on the "Jon" tab should be overwritten with the data on sheets1 and 2, instead of it being cumulative.
2. The macro will then go to sheet2, look at column "Jon", copy the values to the last active as well as the dates and paste special values and transpose them onto the "Jon" tab starting in B18 and B19. Each day all of the dates and values on the "Jon" tab should be overwritten with the data on sheets1 and 2, instead of it being cumulative.
3. The macro would then save the "Jon" tab as a separate pdf in a specified location.
4. The process would then repeat for "Mike" and "Paul". Each day the number of columns can fluctuate, so it may be 3 one day (Jon, Mike, Paul) and 8 the next. The number of rows also may vary from day to day, and column to column.
I have attached a workbook that contains the data for the scenario above as well as the output (Jon, Mike, Paul tabs). Ideally there will not be new tabs that remain for Jon, Mike, Paul, just a default tab (e.g. "output" tab) that would receive the transposed data from the columns for Jon, Mike, Paul. I put all 3 in the workbook so you could see how each of them would output.
View 4 Replies
View Related
Jul 5, 2014
Attached example.
I trying to populate table on sheet "1" from the training log sheet. Based on person name. Eg on sheet 1 i select Chris Williams and it will populate the table with courses he done from table on training sheet.
I tried and failed using vlookup and index match, but think that's what i need to be using.
example.xlsx
View 2 Replies
View Related
Jun 22, 2012
creating / populating a table. In the table below, the left half is the data I currently have. I need to wiggle it around to look like J10.
Basically, I need a formula that I can plug into every cell in Column J that says at the value to the immediate left in Column I. Take this value and look at Column E... then every time there is match, take the value in Column D, and find the next match. Put pipes between each value.
Basically, I am trying to get a row for each parent ID that has all the children in one cell delineated by pipes. I am trying to get a row for each parent ID that has all the children in one cell delineated by pipes.
*
D
E
F
G
H
I
J
7
Spreadsheet I have now
*
*
*
*
[code]....
View 3 Replies
View Related
Feb 24, 2014
Im struggling to find a formula to populate cells based on values to be checked in two fields (ICODE, COMPANY) as shown below.
In the example here, all records where ever the ICODE = 49, i need to populate the fields(columns) AD1,AD2,AD3 or AD4 with the product name of the same company where the ICODE <> 49. There could be between 1-7 products per company.
CURRENT SHEET
ICODE PRODUCT COMPANY AD1 AD2 AD3 AD4
89PENS ABC STATIONERY CO LLC [code]....
The attached example file may be a better alternative to view this problem.
View 2 Replies
View Related
Jan 12, 2010
I have a list of numbers (each corresponding to a different available gear). I have four columns and am trying to populate those columns with all the possible variations without using the same gear twice in any one row. Is there any way of doing this automatically or with a script or something? There are 16 different gears so it could be rather time consuming to input all variations manually.
The attached worksheet has what I am trying to do begun. The possible number of iterations or variations is apparently enormous and am hoping for an automated way to populate those cells.
View 9 Replies
View Related
Mar 21, 2014
I'm looking to populate tables for specific tasks that my site performs and compare their performance against the other top sites in the company. I need to pull the site # and their performance based on the task, ranking them from first to last.
View 5 Replies
View Related
Jan 21, 2014
I am looking to create a table with ranked projects from a different tab that is able to pull data from the same tab and change based on value updates. It is difficult to explain, so I have attached the file below.
What I am looking to do is pull the ranked projects from tab #7 - Scoring to tab #5 - Final list. Each project has a unique ID#, but a lot of the columns I need populated are not unique. I tried using a combination of arrays, but it always returned a #value into the cells.
P.s: In tab #5 - Data sheet, the formulas in I5 and P5 work, but are pretty ridiculous, and I'm pretty sure there must be an easier way. I was looking up values from the 8-budget tab to try and determine which group column H values were from. The only complication I was having was that a project can be allocated to either a functional unit, or group so I need to have the "group" total as independent, not just as a sum of the functional unit totals. Like I said, these formulas work,
View 4 Replies
View Related
Jun 24, 2014
I have an issue whereby I have thousands of lines of data. I need to bring back the "previous month" worth of data (along with some additional information) but not sure how to go about this.
The attached shows the example file. I need the following :
1. Take the data to populate the "Populate" tab
2. Using Column F (Invoice Date Created) to only bring back the "previous month data" - in this case it would be May 2014
3. The following formula is what I have currently for Column B of the "Populate" tab: =SUMPRODUCT(SUMIFS('Data'!$N:$N, 'Data'!$M:$M, "Invoice Payment Processed", 'Data'!$A:$A, A2))
4. The above formula brings back all the values - I only want the previous month.
5. I am then not sure how to calculate Column C - which is a count of the amount of invoices that make up the total
View 3 Replies
View Related
