Multiple UserForms With Multiple Numeric Data Input TextBoxes
Sep 25, 2008
When one creates multiple UserForms with multiple (identical) TextBoxes, every control must have its own event handler procedures. All these TextBoxes in my workbook are to capture numeric data to populate various cells in the workbook.
Would you recommend using a Class Module to handle these events for TextBox controls, rather than having to repeat the event handler code for each control?
And if so, do you have some code that I can use that will cover most of the events and potential error handling routines for numeric input data?
View 9 Replies
ADVERTISEMENT
Dec 3, 2009
i have 2 userforms one with textboxes and the other one with listbox and textboxes.
Everytime user input their data(ie:first name, last name, address etc) in the first form the data's going to be saved in Worksheet("customerSheet") and later on to be displayed in the second form. using the listbox you can select the customer's name and the customer info will be displayed in the textboxes.
here's my code in second form
Private Sub UserForm_Initialize()
Worksheets("CustomerSheet").Activate
Range("A1").Select
'ActiveCell.CurrentRegion.Name = "Database"
'Selection.End(xlDown).Select
'ActiveCell.address(False, False)
viewCustomerBox.RowSource = "A2:A15"
End Sub
View 9 Replies
View Related
Mar 24, 2014
when i choose material from my combobox Options (cboTM), i wanted, only the textboxes regarding to the sheet material unlocked, and the others locked with the color of the form, and the same for the other options like worklabor and equipments. i could blocked for material with this code :
[Code] .....
The prob is, worklabor and equipments will be blocked too, and i dont know how to put correct info on the textboxes.
Attached File : teste1.zip
View 5 Replies
View Related
Dec 13, 2009
Is there any way to have an editbox that when i write a value on it ex: 10 to write this value to A1 when i am pressing the enter button and delete the value of the editbox afterwards when i enter a new value on it to write that on A2?
View 14 Replies
View Related
Oct 29, 2009
I made a front page where the user can input several parameters and then open 3 different userforms which perform calculations. The first 2 userforms just perform calculations but on the third i have two populated comboboxes where the user can choose a device and then it will display the corresponding calculations.
What i would like to do is print all the inputs from the front page, and all 3 userforms (with only the device selected shown). I would like to print the userforms and not copy them to an excel sheet and then print them from there. Is there a way to print all these things together?
View 10 Replies
View Related
May 23, 2007
I have just now dutifully searched here, and elsewhere, on the topic of subforms in Excel VBA, and find nothing. Am I correct in assuming that one simply creates several userforms (and perhaps makes some modal), and launches one form from another? Are there any tutorials on guidelines for using several userforms at once?
View 6 Replies
View Related
Dec 23, 2013
I have a workbook with 4 worksheet that store different type of data. It also has a userform that load at start of the application which is to search the data in the workbook. The userform has a combobox where the names of the sheets are stored. when the user selects say Sheet2 in the combobox, it enables the relevant textboxes on the userform and activates the worksheet at the change event. The userform has a search button that searches all the worksheets based on the text entered in a textbox.
The problem: how to search based on 1 textbox. What I want is: say for e.g the end-user selects sheet2 from the combobox, this intern enables 4 textboxes (Name, DOB, Nationality, ID #) on the userform. The end-user should have the liberty to enter data in 1 and/or any of the textboxes. The search should be performed, that if data is only in 1 of any of textboxes then give all rows that fit that criteria and display in a temp worksheet. if say the name and dob is filled by the user than what matches both should be displayed in a temp worksheet. if say dob, name and ID# given so the search button should narrow down to fit all 3 criteria and then display result in temp worksheet. As if mentioned data can be entered in either just 1 or any or all textboxes.
E.g. the worksheet is (Columns are Name, Nationality, DOB, ID#)
row 1 = name: Steven Martin, DOB: 27-may-1993, Nationality: Trinidad & Tobago, ID #: 1234567
row 2 = name: Gary Richards, DOB: 2-FEB-1993, Nationality: British, ID #: 456789
row 3 = name: David Cohen, DOB: 27-May 1993, Nationality: American, ID #: 98765
row 4 = name: Roberto McDonalds, DOB 21-Jul-1962, Nationality: British, ID # 654321
row 5= name: Gary Richards, DOB: 01-Dec-1978, Nationality: Australian, ID # 1234567
Now if the user enters only name as "Gary Richards" and search then row 2 and 5 should be displayed in a temp worksheet. if user enters name Roberto McDonald and ID# 1234567 then it should not display anything. if user enters DOB 27-may-1993 and nationality British and ID # 1234567 then as well shouldn't display anything and should a msgbox "no data found".
View 4 Replies
View Related
Mar 22, 2013
I am building a shared workbook that will have the same data on multiple worksheets.
The problem is that users are going to be entering updates to that data on individual sheets, not going thru and updating each sheet.
Also, some of the updates will be themselves updated as the day goes on.
What I need is for the workbook to only use the most recent data/update on all of the sheets.
Example: Sheet1 will have all of the info sorted by time. Sheet2 would have only the data for account "A" sorted by job number. Sheet3 would have account "B"...
When a change is made to any of these sheets I want the other sheets to be updated.
Now that I have wrote this out it seems to me that a "worksheet event" macro might do this for me...
But can you write an event macro into all the sheets that would not result in a loop (event macro on sheet1 changes sheet2 which triggers the sheet2 event macro...)?
View 3 Replies
View Related
Mar 16, 2014
I Want To Use User Form to add data with multiple condition........
1st condition : select name, AHSAAN G, ALI G, SHAHID G.......
2nd condition : select , ONFLOOR BC, ON FLOOR VC, ON LINE VC
3rd condiotn : select, PT P2 P3 PB HR LK
In this use form the i used define name "name_1"
1 = I Added this to combobox 1. if if a aded a new name who is not in the list "name_1" then he asked for added this name or name. if i click yes then added the name in "name_1" list.
2 = When i added the data to my sheet by default all field of UserForm don't blank....
View 4 Replies
View Related
Feb 5, 2008
I am both employed and self employed. so I have built a spreadsheet to keep track of expenses... but I hate having to scroll down to enter more and more expenses. So I have created multiple worksheets...
WORKSHEE 1 "INPUT"
Expense Categories down COLUMN 1
Dollar Amounts down COLUMN 2
I would like to use this worksheet to just enter data from a receipt, then press enter and have this information transferred over to WORKSHEET 2 " TOTALS" on its own ROW. Once Enter is pressed, then enter in the same cells on WORKSHEET 1 "INPUT" for another receipt and once Enter is pressed, the data would transfer over to the next row on WORKSHEET 2 "TOTALS" and so on...
So if I want to see my totals... I just go to WORKSHEET 2 "TOTALS"
I have built WORKSHEET 2 "TOTALS" as follows
ROW 1 is the SUM for each respective COLUMN
Each COLUMN is its own CATEGORY from WORKSHEET 1 "INPUT"
Each ROW would represent a new data entry.
To be exact.....................
View 4 Replies
View Related
Nov 7, 2003
I have a number of textboxes, or other boxes, using exactly the same code. In visual basic you can assign an index to these boxes and create one code where the index number specifies the box you are working with.
I have tried finding a way to do thing in VBA, but came up against a blank. I realise that this is either not possible or very simple, but right now I am stuck with the 'not possible'. Does anyone know if the 'very simple' is an option. It would greatly decrease the size of my program, make it easier to visualise and not make me change to much each time.
Of course I refer to subs as much as possible making these routines 3 line routines (sub-call-endsub), but still there are a lot of textbox1_click() routines whereas textbox_click(index) would be nicer.
View 9 Replies
View Related
Apr 22, 2014
I have two user forms, each with a checkbox for Jan-Dec. Also, I have a checkbox "All" to check/uncheck the Jan-Dec boxes. I also created a class module so that if any of the Jan-Dec boxes get unchecked, while the "All" box is still checked, it will uncheck the All box. Basically I just don't want the All checkbox to be able to be checked while any single month is unchecked. The only/easiest way I found to do this was with a class module, so I would not need to create individual Checkbox_Jan_Click() events for each month.
Now my issue is, I have 2 userforms like this. I'd like them to share the same class module, but in the class module I need to refer to UserForm1.CheckBox_All. So I need to dynamically refer to whichever userform was active, but as far as I can tell, this is not possible.
View 4 Replies
View Related
May 15, 2006
I have 2 textboxes, wherein I want them to be validated for Only numeric entries, and also that they should not be empty.
I can write 2 procedures for that, but then thats efficient coding...
In the attached worksheet,
step 1) select M+R in column 2
Step 2) make some entries in the 2 textboxes.
I have written some code, but thats not working...
View 5 Replies
View Related
Jun 10, 2008
My userform requires a user to enter amounts in 5 different textboxes.(textbox1-5) I have created a textbox6 to attempt to capture the totals (should be numerical) of textboxes1-5, even if this textbox figure is a 0 or a minus figure. I have browsed a few other posts with roughly the same issue and have come up with some basic code as per below... the code is pasted into each (textbox 1-5) textbox_change() code.
If TextBox1.Value = "" Then Exit Sub
If TextBox2.Value = "" Then Exit Sub
If TextBox3.Value = "" Then Exit Sub
If TextBox4.Value = "" Then Exit Sub
If TextBox5.Value = "" Then Exit Sub
TextBox6.Value = CDbl(TextBox1.Value) + CDbl(TextBox2.Value) + CDbl(TextBox3.Value) + CDbl(TextBox4.Value) + CDbl(TextBox5.Value)
View 6 Replies
View Related
Oct 12, 2006
Excel – Forms – Combo Box, cell updating.
I have a form (the main one) which accesses a second form, which accesses a third form. All forms have a combo box, control button and a text box.
The items selected in the control boxes are entered into cells (the base cells) in the spreadsheet, via “Control Source”. The text boxes access these cells and show the selected items, which are then copied to other cells via a macro on activating the control button in the main form.
The main form stays open while other items are selected and transferred. Some of the items may not be changed (reselected) as they may be common. The problem is that after a number of items have been selected and transferred, the base cells for the second and third text boxes do not update after a selection from the combo boxes, and they continue to show a previously selected item.
The problem can be solved by closing the 2nd and 3rd forms and starting again. What can I do keep the cells updating without closing the form down?
View 9 Replies
View Related
Dec 10, 2009
I created a right-click menu for userform textboxes from a code I found through googling. It works perfect, however, I don't know how to get it to work for more than one textbox.
Here's the code for the userform:
View 10 Replies
View Related
Jan 9, 2010
Is there a shortcut to rename multiple TextBoxes?
So far I've been renaming each individual TextBox manually. This takes forever...
I have a lot of TextBoxes & hope there is a faster/easier solution.
Example:
TextBox1 --> OtherName1
TextBox2 --> OtherName2
TextBox3 --> OtherName3
TextBox4 --> OtherName4
TextBox5 --> OtherName5
TextBox6 --> OtherName6
TextBox7 --> OtherName7
TextBox8 --> OtherName8
TextBox9 --> OtherName9
TextBox10 --> OtherName10
View 9 Replies
View Related
Nov 2, 2006
re: Validating Textbox to work on a simple form.)
View 2 Replies
View Related
Dec 30, 2006
I have a form using in Excel 2003 that's 5 columns and 20 rows I need to populate the Textboxes with values from a worksheet. I want to use a loop statment that fills the first row, then increments to the next row until all 20 are filled. I have named each row the same name except the last character is the row number 1-20.
ie on the form textboxes named:
NameRow1 AddressRow1 CityRow1 StateRow1 ZipRow1
NameRow2 AddressRow2 CityRow2 StateRow2 ZipRow2
This is what I want to happen
Sub test()
Dim RowNumber As Integer
Dim FormRow As Integer
Dim NameRow As Object
Dim AddressRow As Object
Dim CityRow As Object
Dim StateRow As Object
Dim ZipRow As Object
RowNumber = 3 'Row in Data sheet
FormRow = 1 'Row on form
NameRowString = "NameRow" 'first part of the named object
Do While FormRow < 21
NameRowVar = NameRowString & FormRow................
View 2 Replies
View Related
Jun 13, 2008
When opening up a userform I'm attemping to change the value of a range of textboxes ( 6 to 18) to 0.00.
To do so I used the following code which is controller by a command button
Private Sub CommandButton1_Click()
Dim i As Integer
For i = 6 To 18
userform1.textbox(i).value = format(0,"#,##0.00)
Next i
userform1.show
End Sub
It keeps stalling at "textbox(i)"
A simple solution I'm sure.
Simple problem I'm
View 9 Replies
View Related
Feb 22, 2014
I have a spreadsheet with 5 columns. A1 to A5
Entries are made into columns A2 to A5 but only ever one entry across all cells
If an entry is made into A2 to A5 the I need a "P" to be placed into A1
View 4 Replies
View Related
Feb 6, 2014
I have a total of 648 textboxes on my form. Some of the textboxes allow for char values, some numeric and some monetary. The problem I am running into is with the monetary. I am trying to say on initialize, I want to autoformat 208 of these textboxes to $0.00 and when the users puts in an actual amount it changes to $100.00 or whatever the amount. It would be ideal to just have the textbox blank and when the users puts in something it is formatted automatically to $100.00. Just like I would if I were formatting an Excel column or cell. Here is my code so far: (hopefully no typos in code. Cannot copy and paste as using home computer. My work computer blocks the excelforum site.
[code]....
View 6 Replies
View Related
Oct 17, 2009
I have a user form with:
ComboBox 1
ComboBox 2
Text Boxes 1 - 12
ComboBox 1 runs through a sheet range and removes the duplicates values
ComboBox 2 is linked to Cbx1 and is populated with the second column of that range, depending upon Cbx1's value.
Trying to populate the twelve Text Boxes with the remaining row of values. To program those boxes to clear each time either Cbx 1 or Cbx 2 is changed. This is the section of code I can't make work properly. I don't raise any errors, but the TextBoxes remain blank none the less.
View 2 Replies
View Related
Mar 17, 2012
I have 35 text boxes to add to the bottom of a chart. Is there no way to mark multiple boxes and align them to the left or right or make them all the same height?
View 2 Replies
View Related
Apr 27, 2006
I have a userform with about 20 textboxes. I would like to use the same "data validation" procedure on each textbox as the user enters data into the form. I'll use the exit event to trigger the validation. As the user moves from one textbox to the next, the data will be validated; if it's out of range, the user will be prompted to correct it.
Is there a way to have a common event procedure so I don't have to have a separate procedure for each textbox individually? I know I can put the actual validation code in its own procedure and then call it from each event procedure but that would still leave me with 20 event procedures like:
Private Sub Textbox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
ValidateData
End Sub
View 7 Replies
View Related
Apr 2, 2007
I am trying to create a form with a text box that when text is entered, it adds to the userform another textbox with that data in it. The focus then goes back to the original textbox so that more may be added indefinitely, all with relative position to the most recently added textbox. Here is what I have so far, works for one time, but not multiple textboxes. The original textbox is "txtAPID"
Private Sub MakeNewTextBox()
Dim newTextBox As TextBox
Dim ControlTop As Long
With LastAirport
ControlTop = 30
End With
Set newTextBox = Me.Controls.Add("Forms.TextBox.1", "txtNextAirport", True)
With newTextBox
.Left = 20
.Top = ControlTop + 3
.Height = 15
.Text = txtAPID.Text
End With....................
View 2 Replies
View Related
Jun 11, 2007
Have a slick way to have multiple textboxes on a userform updatable by a single calendar control located on it's own userform.
basically, i have a userform with multiple textboxes. A double click brings up another userform with a calendar control. How do you idenitfy which textbox called up the calendar?
View 9 Replies
View Related
Aug 10, 2006
how does one use a single scrollbar control to change the scroll position of two textboxes simultaneously?
The reason why this is required is because the textboxes are both multilines and the data in each is related. So there isn't much point in the user scrolling through textbox1 and then trying to find the same scroll position in textbox2 by changing it's scrollbar.
I've tried changing the Curline property of the textboxes within the scrollbar change event but this is obviously a poor method as it involves changing the focus every time the user scrolls...
View 7 Replies
View Related
Jun 24, 2008
I am taking a range of cells (C22:D67) on several sheets ( same cells on each sheet) 4 sheets in total, each range appears in it's own text box on the single user form.
- I would like to know if there is an easier way of doing this, and can I leave out the cells without anything in them?
The code I am using at the moment is..
Private Sub cmdSeeNotes_Click()
Sheets("Core").Activate ....
View 9 Replies
View Related
May 27, 2006
I have a matrix with default probabilities. I have this matrix in my worksheet. The user will give the number of periods to be calculated with and it will result in a new matrix with default periods over time of choice.
Private Sub UserForm_Click()
Dim numberof_text_Change As Single
Dim initial_text_Change As Single
Range("U36:AC44").Select
Selection.FormulaArray = "=matrixpower(R[-10]C:R[-2]C[8],numberof_text.value)"
End Sub
matrixpower is a function that works perfectly well. It takes one matrix as an argument and the number of periods to use. It then simply computes the chosen number of powers of my matrix. I have a userform that has an inputbox called numberof_text which specifies the number of periods that the user wishes to use in calculating the chance of default. Hence I would like to use this variable as an argument in the formulaarray. This doesn't seem to work! I only get "#VALUE!" in every cell. If I replace "numberof_text.value" in the matrixpower function with a number it works fine. What to do?
What the function needs to do is take an argument which is the matrix I have on my spreadsheet. Take the number of times to take powers of the matrix and print it on a pre-specified place on the worksheet. If I cannot use variables with FormulaArrays, then is there another good way of choosing the matrix to use with "powermatrix"?
View 2 Replies
View Related
