I am attempted to do what a pivot does. I have a list of data column b, however I want to have a list of location as to "TEST"
a b
1 test
2 okay
3 okay
4 test
5 okay
6 okay
7 test
8 test
9 okay
10 test
The list can either be in on cell or a dfferent column, i.e. a30
a
30 a1
31 a4
32 a7
33 a8
34 a10
35
36
I can't seem to find a way to make a data validation list automatically show the first item in the list rather than showing blank.
View 10 Replies View RelatedI have a list in column L2:L352. I would like to be able to start at AD2 and drag horizontally so that AD2 = L2, AE2 = <BLANK>, AF2 = <BLANK>, AG2 = L3, AH2 = <BLANK>, AI2 = <BLANK>, AJ2 = L4, etc.... until L352 has been autofilled.
View 2 Replies View RelatedI am trying to make some of my data validation dropdown list boxes narrower. I was told one way to do that is to use combo boxes. (If there are any other ways, please let me know!)
I don't think my combo boxes are working. I had tried to make a combo box appear in each data validation pulldown cell by using this tutorial:
http://www.contextures.com/xlDataVal10.html
I followed this tutorial word for word, but when I try to test the code at the end by double-clicking on a data validation pulldown cell, no combo box appears.
how I can, in a formulae, identify the last item(s) in a list of values. For example I have data in rows 1-25 with numeric data in. I want to put a formula in, say, row 100 that averages the last three data items above in the same column, but the number of data items will increase over time to use row 26, 27, etc. and I don't want to change the formula in row 100.
View 4 Replies View RelatedI have a list box on a form. When I click an item in the list, it hilights it with a blue background. How can then deselect the item that I had selected using code?
View 2 Replies View RelatedI use ComboBox to add items to the ListBox in userform
I am tring to loop through the ListBox to check each name in the ListBox, so ifthe name chosen by the ComboBox exists in the ListBox then donot add it,
but both codes do check the number of the item in the ListBox.
I need to check the name of the item?
With ListBox1
For i = 1 To ListBox1.Value
If i = ComboBox1.Value Then MsgBox "u cannot add this item"
Exit Sub
Next i
For i = LBound(ListBox1.List) To UBound(ListBox1.List)
If i = ComboBox1.Value Then MsgBox " u cannot add this item"
Exit Sub
Next i
.AddItem tot.Value
.List(.ListCount - 1, 1) = ComboBox1.Value
End With
How do I add a "comment" to an item of a drop-down list? I've got several items and every item has its own comment. I dont know how to do this.
View 1 Replies View Related[URL]
I had this posted in Formulas and functions
I would like to perform an operation on each filtered range. To do this I need some kind of loop which would enable each item in the auto filler. I dont know how to do this. The loop i need is to enable one item, do operation (ex sum of visible rows --> i already have a code for that) then disable that currently visible range and enable next one, perform sum operation again.
View 1 Replies View RelatedI am looking to return a sequential list of items which match to an element of text that I have selected. An example will explain what I want better.
Item Selected Tom
Ref AmountTom C 32206 3683Tom B 36212 34464Frank 10552 43642Mary 13228 30534Tom A 30694 35798Mary B 9121 27489
So I want a Formula which will return the Reference for items in column A which contain the word Tom.So the Result I want is:Selected
Tom C 32206 3683Tom B 36212 34464Tom A 30694 35798
The formula I have to return an item containing Tom is:
=INDEX($A$5:$A$10,MATCH("*"&$B$2&"*",$A$5:$A$10,0))
But this only returns the first Tom and no other.The Formula I have to return sequential items with exact reference:
=INDEX($B$4:$B$11, SMALL(INDEX(($B$2=$A$4:$A$11)*(MATCH(ROW($A$4:$A$11), ROW($A$4:$A$11)))+($B$2$A$4:$A$11)*1048577, 0, 0), ROW($A1)))
This will (if I change the row reference at the end) return all Tom C's (If I change B2 to "Tom C") in sequential order but only the Tom C's and not the other Tom's (Tom B and Tom A). I have tried replacing the $B$2 with "*"&$B$2&"*" but that doesn't seem to work.
I have a budget document that has a selection (Named Range with list items in a drop down) Approved, Rejected, Awaiting Approval or Blank. What I would like to do is set a process that could approve all Awaiting Approval. My thought was to create another choice box at the top that allowed the user to choose approve all awaiting and it would select every matching item that was Awaiting Approval and change it to Approved. At the same time I would like it to set the date and time, this could just copy what I put in an associated field or be real time.
View 9 Replies View RelatedSuppose i have the following in column A (in a range called MyWords):
office
offer
dearly
dear
baggage
luggage
discount
count
students
dent
I am looking for a solution which will given me the number of cells in 'MyWords' range which contain each of the following words. The desired solution in in the left column:
Word | Count
dear | 2
off | 2
ear| 2
count | 2
dent | 2
stud | 1
age | 2
and so on...
I hope my question is clear.
I've in a sheet something like this:
A B
Number Item
2 Apples
1 Orange
2 PineApple
5 Orange
1 Apple
I need to do a code to get how many Apples Orange, PinneApple or somethig is in the range
For Example:
3 Apples
6 Orange
1 PinneApple
The items are variable. It's starts in the second row, and finish in the next blank row.
The below is causing me an issue as it is setting the ws value to equal nothing instead of sheet1 or sheet2 etc. I have my dimensions set above and there are no spelling mistakes.
It falls down on the
VB : Set LastRow = ws.Range("a65536").End(xlUp)
line but this seems to happen because ws is set to nothing.
VB:
For iramp2 = 0 To ListBox1.ListCount - 1
If ListBox1.Selected(iramp2) Then
Set ws = ActiveWorkbook.Sheets("Sheet" & iramp2)
End If
[Code] .....
I am a softball coach and I want to create a fielding roster for my team. I have all the players names in column A (A4:A14). I have positions listed in column L (L4:L15) as follows: P, C, 1B, 2B, SS, 3B, LF, LC, CF, RC, RF, X. Cell range B4:H14 (7 innings) is where I need to have drop downs, but once I select a certain positions for one player in inning 1, for ex., I want it to not be available for the next player in the same inning.
View 6 Replies View RelatedI created a drop down list (of various Input Groups) and I need to show the selected group's responsibilities on a separate sheet; is there an easy way to do this?
View 2 Replies View RelatedYou can find attached the workbook I am working on.
In my workbook I have four sheets. Only two sheets are relevant in this case: "Sheet1" and "List". On "Sheet1" there in column A there is big range of codenumbers (highlighted with red).
On the "List" worksheet I have a smaller list (highlighted with green).
I have a code also in module1 but the code is not working.
I would like my macro to do the following. Check the code number from the "List" worksheet (green) and search for it in "Sheet1" column A (red). If this codnumber can be found in column A then leave the number on the green list. If it cannot be found in column A then, delete it from the green list. If you open the file, you can see on the "List" worksheet that there are three code numbers in the green range. The upper and the bottom code number can be found on the "Sheet1" column A (red) range, but the middle number cannot be found. So if the macro would work correctly then it would delete the middle number, and leave the other two untouched!
Searching a text string on Sheet 1 to see if it contains any item in a list (on Sheet 2 Column 1) and if so return the value of Sheet 2 Column 2 next to the list item found?
It's a budget problem: Sheet 1 has my downloaded Visa statements. I want to categorise all items.
Eg Any item containing the string 'safeway' is categorised as 'General expenses'. So the list on Sheet 2 has an item called 'safeway' and in the next column 'General expenses'.
And for the item on Sheet 1 'BPAYN BUPA AUSTRALIA BPAY MBF monthly' I have an item in Sheet 2 that is simply 'BUPA' with category 'Medical expenses'.
I'm looking for click event code for a list box called lbActiveItemList that finds a match for the selected record in Column 1, to the Sheet ReturnData in Column A from row 6 on (using the G column to find the last row). Upon finding a match it should close the userform, and make the G cell for the matching record the Active Cell.
View 7 Replies View RelatedI wrote a macro that creates a data validation list from a set of cells on Sheet 1.
On Sheet two I would like a have Macro select each item in order on the validation list and paste into every fourth cell.
For example, if my Data Validation list on Sheet 1 contains three items: Comp. A, COmp. B, Comp. C
On Sheet 2, I would like to see Comp. A in cell K1, Comp. B in cell O1, Comp. C in cell S1.
I have seen a few codes but nothing that works effectively.
I have two cells and both have a drop down list. I would like Excel to automatically select an item from the second drop-down list based on the manual selection of the first drop-down list. The second cell needs the have the dependent item appear in the second cell not just be available in the drop-down list.
For example, Cell A1 has a drop-down lsit of the names of fruits, vegetables and flowers (apples, bananas, carrots, carnations, corn, daisys, tomatoes, zuchinni). Cell B1 has another drop down with three items (fruits, vegetables & flowers) which needs to be dependent on the first list. Further, I would like cell B1 to automatically select the appropriate item.
For example, if "carrots" is selected in cell A1 then I would like "vegetables" to be selected and automatically appear in cell B1. If "carnations" is selected in cell A1 then I would like "flowers" to appear (not just be available in the drop down).
http://home.comcast.net/~unkerjay/CSBG_Sheet.xls
in it, there's a Sheet named:
CSBG Report
which has a drop down list for all possible reports
beginning with "Jan".
There's also a "Totals" sheet which has the corresponding
information for each report totaled in separate columns.
Jan, for instance is totaled in column B.
Feb, is totaled in column C.
And so on.
What I'd like to be able to do, is, depending on
the report selected, to have the information in
the corresponding cells in the "CSBG Reports" Sheet
pulled from the appropriate column in the "Totals" Sheet.
So far, I'm not wrapping my mind around a way to
do this.
Suppose I have a department List, and I made a list from that column (Department List), and I enter more staff and selected a department for them during registering, now one of the Department List Item change, How is it possible to change all the entry which has that department?
For more info see the attachment.
I have a normal data validation box on excel, but I want to be able to navigate my way through it using a macro. I can select & opent the drop down list with the following
SendKeys "%{DOWN}"
but then an action like
SendKeys "{UP}"
Does not navigate itself up the menu as a normal keystoke would. Any ideas on how to solve this? Basically, I want to select a cell, open the drop down menu, select the first choice in it (so thinking SendKeys "{HOME}{ENTER}" ) all using a macro.
Is there a limit to the number of entries in a validation list? I have a list that contains about 300 entries, but the drop-down list only shows 246 entries. I am sure that the references are correct.
View 2 Replies View RelatedI have filtered a list, defined a range of the visible cells. Now I want to loop thru the range and process each cell. In the process I have to refer to the next visible cell. How can I achive this? both .Offset and .Item result in the next none-visible cell.
View 3 Replies View RelatedI have created a drop down list for items we quote on. each item has a different formula depending on the variables on sheet one Sheet1. I have listed the formulas in the column next to the drop down list for each item, but our now need the main quote to put in the formula in another cell when the item is chosen from the drop down list.
View 2 Replies View RelatedI would like to do is in cell B8, copy each row of text to a newly inserted line below. The highlighted cells in yellow have been done manually as an example. I have about 50 groupings of these to do manually. I'm making an effort to learn VBA.
View 3 Replies View Relatedi have a dropdown list called SN (for serial numbers). items are abc001-abc100. i would like to remove an item once ive selected it. i.e. if i have chosen abc001 on the first row, when i go to the next row and open the dropdown list, abc001 should not be there anymore. this is for me to avoid duplicate listing of the items.
View 2 Replies View Related