Listbox And Textbox On Different Forms?
May 13, 2014I have a listbox on userform1 with multiselect and i am trying to populate the selection into textbox1 on userform2.
View 6 RepliesI have a listbox on userform1 with multiselect and i am trying to populate the selection into textbox1 on userform2.
View 6 RepliesI have a list of People on one sheet and a list of Shifts on another. Some people have Qualifications (CPR, electirician, Non-Violence trained, etc.) and some shifts have Requirements. I would like to provide a (non-required) validation list for these entering these values. If the user enters a new requirement or qualification.
An explicit Validation list is too long. I don't want to use cells to hold a list that Validation can read from. So, my current plan is to a Selection_Change event to create/destroy a form ListBox, which will be populated by my VB code. How to place that is presenting some challanges. How to turn the user's multiply selected input into a comma delimited string is the easier of my two main challanges.
So, my concice question is when the user selects a single cell, how do I create a listbox that is possitioned over that selected cell? My non-concice question is: Is there a better way to go about this?
I created a list box from Forms toolbar (instead from VBE). I would like to add items to this list box using VBA, but cannot find right qualifier to access this object. When I tried to use " recording macro," the code that was generated was
ActiveSheet.Shapes("List Box 7")
but if I try something like
ActiveSheet.Shapes("List Box 7").addItem "hello"
it doesn't work, because well, addItem method belongs to ListBox object, not to Shape. So if I want to add an item to this list box, how should I reference this list box so that I can call addItem() on it?
I'm using forms toolbox to add textboxes on an user input sheet for my workbook.
There would be 3 textboxes included in the group box added to the user input sheet.
I'm struggling with the code to accomplish the following:
Textbox1 - is a % input. I would like the input to be formatted to 2 percentage points. In other words, if someone enters 2, it will show as 2.00% and I want the 2.00% to be recognized as such in the spreadsheet calculations. In other words, the input is used in the calculations in another sheet.
Code thus far (and I may be offbase on this):
Private Sub TextBox1_Change()
Sheets("Sheet2").Range("rate").Value = TextBox1.Value
End Sub
Problem - the cursor is not moving and the result of the input is not showing. I would like the cursor to move from textbox1 to textbox2 to textbox3 by tab or enter button.
Textbox2 - is decimal input. I would like the input 5, it will formatted to show as 5.0. This input is used in the calculations in another sheet.
Private Sub TextBox2_Change()
Sheets("Sheet2").Range("multiple").Value = TextBox1.Value
End Sub
Textbox3 - is a result box based on the inputs from textbox1 and textbox2. I would like the result to be shown to the user in this textbox3 and for it to be greyed out and not to accept any inputs from the user.
That is, it is not an input box but rather a results box.
How can i populate a forms listbox from another workbooks named range? ....
View 9 Replies View Relatediam trying to open a workbook from a forms textbox.text value. i have got this so far
Private Sub cmdOpenProject_Click()
Workbooks.Open Filename:="C:Documents and SettingsOwnerDesktopExcelStuffTextBox1"
End Sub
have also tried
Private Sub cmdOpenProject_Click()
Workbooks.Open Filename:="C:Documents and SettingsOwnerDesktopExcelStuffTextBox1.text"
End Sub
I want to add the selected value from listbox to textbox.
View 6 Replies View RelatedI have a listbox set as multiselect that looks at a worksheet that contains in excess of 11,000 items. I would like a way to filter down this list by the entry a user types either via a textbox or some other way.
View 9 Replies View RelatedI am trying to write a code that will allow me to search a multiselect listbox. The listbox has 4 column. The first column is Manager's names. I want to search this column by typing the name in a textbox. The code I have will find the name, but the first record that matches appear at the bottom of the listbox. This is the code i copied from another website:
Private Sub TextBox1_Change()
'the change event runs each time the user
'types into a text box
Dim s As String
Dim i As Integer
s = TextBox1.Text
'Note the use of the ListIndex property of the ListBox
'If the ListIndex is -1 means nothing selected
'If 0 means the first item selected
ListBox1.ListIndex = -1
If TextBox1.Text = "" Then 'nothing typed
Exit Sub
End If
For i = 0 To ListBox1.ListCount - 1
'use the LIKE operator to compare
'convert both to Uppercase as well so case does not matter
If UCase(ListBox1.List(i)) Like UCase(s & "*") Then
ListBox1.ListIndex = i
Exit Sub
End If
Next
End Sub
Also I want to be able to copy the selected items in the fourth column to another worksheet.
I'm attempting to add the values for a combobox and (2) text boxes to a list box on a form. The list has 3 columns. When I run code to add to the list box the values are added on separate rows instead of the same row. See code below and attached screen shot.
VB:
Private Sub cmdAddToList_Click()
Dim i As Integer
Dim iRow As Integer
If Me.cboParts.ListIndex = -1 Then Exit Sub
For i = 0 To Me.lstParts.ListCount - 1
[Code] ....
UserForm3.jpg
I spent so long time to fix this problem, but it seems that I can't go on. I have a simple question. How can I get the data from the UserForm and use it in the worksheet? Everything works fine, only the UserForm makes problems. Here is the
View 4 Replies View RelatedOn Sheet1 I have four columns populated with data below the following header row titles.
Column1 [A1] = Batch Number
Column2 [B1] = Forename
Column3 [C1] = Surname
Column4 [D1] = RefNumber.
I have set up UserForm1 with TextBox1 and ListBox1 controls. What I am trying to do is open the UserForm, type in a Batch Number in the textbox and fill the listbox with the Forename Surname and RefNumber associated with the batch number.
Example ....
I'm using a Textbox macro to search my database for a specific date, and return the company name of all entrys for that date, into a ListBox.
Now this is the only way I'm prepared to look at doing, and I have managed to do it...... partially - as stupid as it sounds, I cant get multiple results to list in the ListBox itself, and for the life in me I cant find out how to do it.
Also, once the options have been brought back into the ListBox, I then need code which will then populate further locked TextBox's which the rest of the company info, when selected from the ListBox.
I know its asking alot (or maybe not) but I believe, (unless ive done it a really awkward way, I'm not too far away, I just dont know the code to enter, to be able to do it.
Private Sub CommandButton1_Click()
Dim Nullstring
Application.ScreenUpdating = False
If TextBox1.Value = "" Or Nullstring Then
MsgBox "Please enter a date to search for"
GoTo error1:
End If.....................................
I'm having some trouble with the following. On a userform, I have 3 listboxes:
ListBox1Category
ListBox2Category
ListBox3Category
When I change the value of any one of the Listboxes, I would like to fill the corresponding TextBox. They're named:
TextBox1Amount
TextBox2Amount
TextBox3Amount
So, if I:
* change ListBox1Category, I want to have 20 (for example) in TextBox1Amount
* change ListBox2Category, I want to have 20 (for example) in TextBox2Amount
* change ListBox3Category, I want to have 20 (for example) in TextBox3Amount
So the numbers 1, 2, 3 should match. Does anyone know the code for this?
I am confronting a problem with a ListBox that displays Item by the selection of a ComboBox in the same Userform.
All works like this in the column “A” from my data sheet I have a list of names and in the column J I have a list of years.
What my UserForm1 dose is to select the year column with the ComboBox and display in the ListBox the corresponding name from this year selection. Until there all work fine.
Now I have to display in the TextBoxes form the Userform2 all data form my (data sheet) and this dose not work properly.
What happens is that when I select and Item in my listBox.Userform1, Usrform2 kind of display Items from another person.
I will also attach an example on this thread for a better view of my problem.
I need to make an userform which can look up data from a sheet that contains a list of distributors and adresses.
I need to be able to search by:
1- postal code
2- postal code and product reference
Hence, I have 2 textboxes for inputing the postal code and the reference, and a listbox that I would like showing the distributors' names that are localized in the corresponding area and which did buy the product from us. Here's what my database sheet looks like:
Postal Code
Products
Distributor
Adress
[Code].....
What I don't know how to do is to have a variant Rowsource property for the listbox, according to the postal code and the product reference the user enters, plus I want one distributor's name to show only once in the case I'm only searching by postal code.
I have a listbox that is automatically filled with data in two columns through a lookup function from a worksheet. That works fine. But now I want to fill the third column with data through a text box, but only in the rows I have selected in the listbox.
My code so far is:
[Code] ....
The number I want to insert into the listbox appears, but not in column 3 in the selected row(s).
I have a listbox1 which lists items from a rowsource, when i click on an item within the listbox i would like to call the value from another cell and populate into textbox1 on the same sheet1.
View 1 Replies View RelatedI am trying to create a search where the user types into the text box 'ItemDescription' then hits the 'ItemDescSearch' button (see below code) to pollute the list box 'lbSamDesc' with any partial matches from the specified range. Currently when I click on the button it takes about 8 seconds then no results are displayed in the List Box.
View 9 Replies View RelatedHow do you set the font for a textbox and or listbox? I have tried:
View 4 Replies View RelatedIs it possible to copy listbox value into the textbox when double click....If the user select any row from listbox and double click on it onether userform will pop up and second column of listbox entry will load into textbox automatically.
View 9 Replies View RelatedI have a list of customers in listbox1 (the text values of which come from a spreadsheet), that I want to refine as I type in textbox1. I'm not sure if it's possilbe, but I would like it to work similar to the itunes search (if you're familiar with it) where it searchs for any occurance of the text within the list as opposed to just searching for the letters at the beginning of the word.
View 9 Replies View RelatedI thought I would get this on my own, but I digress.
I received sample code to populate a listbox from tab names of a workbook, yay!
What I have attempted is to use a user form, enter a string in a textbox and if it match's any string in the list box, then highlight.
Basically, its a simple search engine.
I need to make a userform, my userform contains (1 textbox , 2 labels , 1 listbox , 2 buttons(clear & cancel))
I tried my best but I unable to make it perfect..
I need to populate data in listbox based on textbox change, below is my condition
Required column Headers in listbox is "Acno Nbr","investname","amount"
- textbox contains only number if user enter text then msgbox should show plz enter numbers only & as well as in lable
- our account nbr which we are enter in textbox that should be start from "9" if user enter number otherthan "9" , msg should show invalid number & as well as in lable
- if user entering the number & whatever the number user enter listbox should populate required data whatever the account nbr starting with that number(textbox value)
- suppose if user enter only lessthan 10 & greaterthan 10 then in lable show invalid number u have enter lenght of account nbr(textbox value)
- suppose if textbox value is available in worksheet then in listbox populate the required data and in lable populate "yes it's power goal number"
- suppose if textbox value is not available in worksheet then in lable show "no records found - might be its not a power goal number"
See attached file..
I currently have this code that uses a textbox to search through the populated listbox and removes any entries not matching the value in the textbox. It works great, but if the backspace key is struck it cannot reload the listbox and narrow down the results again.
View 2 Replies View RelatedI am looking for a text box code that works with a search userform.
Basically, I search using my userform find function and if there are more than one record found I want to be able to either:
1) have the records found appear in a listbox
0r
2) have the first record appear in the userform but a text box will show I am on 1 of X records and when I click a command button, go the next record, which will be 2 of x records and so on...
VB:
Private Sub cmbNext_Click() Dim FirstCl As Range
'first data Entry
Set FirstCl = Range("a2").End(xlDown).Offset(1, 0)
[Code] ....
This is the code for the button that goes to the next record but I am unsure how to relate that a listbox or text box that shows the record number I am on out of the total that there are.
I would also be looking for another button that goes back one record. So i am hoping it's as easy as reversing the code for the next record function.
I am not sure if the listbox that could show all I records and one can just be selected is easier than showing the textbox with the " 1 of X records".
I've created a macro that searches the active worksheet for a textboxvalue and copies all full and partial matches to a multicolumn listbox. However, I'd like to install some sort of filter that prevents registrations not containing the value in a combobox from making it into the listbox (so I'd actually like to search for registrations meeting two criteria, i.e. an advanced search). The macro I'm using is:
Private Sub Query_Change()
Dim vFound As Range
Dim strFirstAddress As String
On Error Goto ErrorHandle
Set vFound = Cells.Find(What:=Query.value, After:=Cells(1, 10), _
LookIn:=xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False)
If Not vFound Is Nothing Then
strFirstAddress = vFound.Address
I've attached the workbook I'm working on, in case I haven't made myself sufficiently clear in the above.
I want to select items in a listbox and transfer those items via command button in a textbox. The listbox is already filled. I have no idea how to realize that.
Attached is the form I created so far. I copied everything together and matched it up for me. It's probably not the best way but it works. I marked the section where I need help in yellow.
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
I have two lists mainly TV Brand & There Models.
List 1 (TV Brand)
Sony
LG
Samsung
Depended List 2 (Models)
Sony LG Samsung
EX420 55EB9600 PL43E450A1FXZP
EX430 77EC9800 PL43E490B4FXZP
EX550 55EA8800 PL43E400U1FXZP
EX520 KN55S9C UN32EH5300FXZP
EX645 55EA9800 PL64E8000GFXZP
I'm using two Listboxes (Form Control) with multiple selection options namely Listbox 1 (Brand) & Listbox 2 (Models). I want listbox 2 input range to be depended on selection made on Listbox 1 (Brand). For example, if user selects Sony then box2 should show only Sony's models and if user selects Sony & LG, box2 should show models for both Sony & LG.