I have created the below macro to show the user (when he / she clicks on a button) how many days are left till the deadline day (taken from MS Project).
Dim rng As Range
Dim count As Integer
Set rng = Sheets("Programme Reporting").[E2:E200]
count = Application.Evaluate("NETWORKDAYS(Today(),E3)")
ActiveCell.Value = count
The range I want to output the days to is L3:L200 that seems to be okay. I have an issue with trying and putting a range in the NETWORKDAYS area, if I try and put in E3:E200 (the range of dates) it fails, as does $E$3:$E$200. At the moment the above code does work but it only puts in the days for one of the entries (E3).
I currently have this beast of a code running in Excel 2013:
HTML Code: Sub OBTAIN_RAW_DATA_MACRO() Dim NextCol As Long
'Copy data Workbooks.Open Filename:= _
However the issue lies in that once the data is refreshed, the slicers reading off the above raw data/pivots, automatically select all weeks, however this is not beneficial for the data being presented.
Is there anyway to have, once the Pivots have been updated, for the macro to then check and select current week range (beginning Monday) only?
With wsSheet.Range("A:A") ReDim MyArray(1 To .Rows.Count, 1 To .Columns.Count) MyArray = wsSheet.Range("A:A") For i= 1 To .Rows.Count For j= 1 To .Columns.Count wsSheet.Cells(i, j+ .Offset(0, 3).Column) = MyArray(i, j) Next: Next
I want to select alla values in column A, but when I specify the range as "A:A" the code results in an infinite loop! How can I come around this?
I'm new to Excel 2007... whilst I'm managing to find most things I'm used to using in 2003, I have an issue in one workbook that I can't figure out.
When I click in some single cells (not all), that cell and several below it automatically highlight as a range... left-clicking initially highlights the cell, but as you release the mouse button, the others below it also highlight.
I am trying to select rows in excel using a macro and then hide the rows, but i want to be able to add rows within this selection and still be able to hide the complete selection of rows.
The macro i am currently using is shown below: This hides rows 131 - 205, but if i was to add in another row in between so the range i now want to hide is 131-206 can i get the macro to update to this new range?
i want to write a macro which searches for data in a xl sheet.It should then format that data in a particular format.The data can be present in multiple places.For eg. formating a 5*6 matrix which starts from d4 cell and a 4*7 matrix which starts from e15 cell(please note that d4 and e15 location are not fixed).
To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
I am receiving a 'subscript out of range' error on the lines of code below.
I would note that all variables are declared and all seem meaningful as regards what you would expect at that point.
Below is a snippet from the immediate window which indicates what the values are: completecashname C:CashDevelopmentMyFolderoutputCASH042706.xls cashsheetname Formatted Sheet cashcurrcolumn A cashfirstrow 2 cashlastrow 876
Also the workbooks are both closed at this point (but it makes no difference)
Set CashCopy = Workbooks(CompleteCashName).Sheets(CashSheetName). _ Range(CashCurrColumn & Cashfirstrow & ":K" & Cashlastrow).Value Set PelPaste = Workbooks(completepelname).Sheets(PELSheetName). _ Range((PELCurrColumn & PELlastrow)).Value
After this I would like VBA to copy all the variables in a range that is bounded by startcell and endcell. Here is what my code is currently for selecting the range:
Range("A2:" & endcell).Select
Instead of A2, I would like to select startcell, but I cannot figure out how. Currently I can get VBA to recognise endcell. For example, using the formula above I can copy the range from A2 to endcell. However, when I try and use startcell as the beginning of the range (in place of A2) the code does not work.
I have two tables in two different worksheets. In the first table, rows get deleted if the value in column 'S' (the first row to the right of the table) is not '1', and columns get deleted if the value in row '2' (third row above the table) is not '1'. In the second table, the number of columns stays always the same but rows get deleted if the value in column 'N' (first column to the right of the table) is not '1'.
After the rows and columns are deleted the tables get pasted in a ppt presentation. Now the problem: I am a beginner in VBA and up til now I am only able to define a certain Range, e.g. ("A5:M17"), to be copied and pasted into ppt. But since the tables will sometimes be bigger than other times depending if rows/columns are deleted, I would rather define a dynamic Range. The top left cell of both tabels to be copied is always 'A5' but the bottom right cell changes.
I have a spreadsheet with Employee details and each employee has a Indicator and a Score. I'm battling to get Excel to do a lookup on the Indicator, find the applicable Score Range, see if the individual's Score falls within the range and then inserts the relevant % into a cell in a specific row of each employee.
If we did not have more than 2000 doing it manualy might have been an option. Also, the Percentages and Score Ranges in the matrix might change a couple of times....
I am having a few problems selecting a range. What I am trying to do is select a range where the number of columns stay the same, but the rows are variable; ranging from one row upwards. At the end of the rows, there is a blank row. I currently have;
I am trying to select a range of cells. The range I need to select starts in Cell A1. I need to select every row with data in column 1 up to the first row with no data. I then need to expand the range to all columns up the last column with data, including columns with blank cells.
The problem with my code relates to the selection of columns. It is only selecting up to column F. Column G is empty, Column H has data, Columns I-J are empty, Columns K-R have data.
I'm trying to obtain a formula that allows me to select the last 20 numbers in a range of numbers that continue to increase weekly. i.e column a3-a3000 increases by one number every week. I need the formula to sum the lowest 10 numbers of the last 20. If there is 30 numbers from a13-a33 week one. I require the formula to pick up the 10 lowest from the last 20 (a13-a33). Week two the cell increases by on to a34. The formula would then have to pick up the lowest 10 from the last 20 (a14-a44) and so on.
When I use this code is only gets A1:N6...: is there anyway to get it to select the range all the way to the end of the data. I tried CurrentRegion and some other stuff but can't get it to work.: The range may go upto line 500 or 3 I just never know.
I'm trying to write a formatting macro that will insert a gray divider (row) into a blank line. I'm going to do this with a keyboard command, but I'm having a hard time selecting to column AJ. Obviously this command...
...takes you to the end of the page, but I don't need to go that far, just to column AJ.
I have a spreadsheet where I need to perform a calculation on the lowest 10 of the 20 most recent entries. Currently I am just deleting the oldest entry and putting in the new data but I now desire to keep all my data.
How do I select the new range of 20 rows and then tell it to take the 10 lowest values to perform the calculation
I have 2 worksheets where I need to transfer a certain amount of data from one to another depending on dates.
Sheet ‘A’, is the main data source. Col A holds all 365 dates from 1 Jan to 31 Dec(starting at A2), and the subsequent data for each day is held in cols B to P. Sheet ‘B’ is the destination where the user will specify a key date in cell A3, then in A4 to A32, formulae populate the next 29 dates (ie so there is a continuous run of 30 days).
What I need to do, is to identify the same 30 day range from sheet B on sheet A, then to copy the data in Cols B to P for that range back onto sheet B (pasting in at D3)
Question 1) Is there a way that whenever I select Cell B39 that it will copy cells B39:V39 ? From there I can manually paste that selection to where I need to.
If this is possible, it would save the effort of having to select B39:V39 manually and clicking CTRL-C. I am gathering data and the copying and pasting is killing me.
Question 2) Is it possible that when I click on Cell A9 that it can paste any data that I just copied from another worksheet to cells A9:D29? The size of the selection that I would copy is the same size as A9:D29 (4 columns & 29 rows).
I have searched for a solution, but I am not having much luck since I am anaware of the proper terminology for these types of actions.