i am looking for a Macro, that looks for a bank row and then copies the below row in to it.
For example
blank row 5
Paste data from row 6 to row 5
the sheet has 1500 lines of data with a lot of blank rows that needs pasting. I have attached a example of the file i am using.
What I need is a macro that can be assigned to a button. This macro would search Column B for any entry (these names are selected from a drop-down list). Any time it finds an entry, it would copy that entire row of data and paste it into the Shared worksheet in the same workbook. This macro would be run on four other sheets in the workbook and would be run at least weekly. The Shared worksheet will only be blank the first time. After that, the macro would need to paste the information in the first blank row...
View 9 Replies View RelatedI am trying to make a macro, but because of my inexperience, it's not working out. I have got a big list (list 1) of numbers in column E. each number has some information in the cells of columns C, D and L, all in the same row. on the same sheet, I have got another, smaller set of numbers (list 2), also in column E but at the bottom of the sheet. the numbers in list 2 are all present in list 1 (but not all numbers in list 1 are present in list 2). the columns C, D and L on the same row of the numbers in list 2 are empty...............
View 4 Replies View RelatedWhat i am trying to do is in 1 workbook (labled as Book1 literally), it needs to copy the sheets out of every .xls file there is in a single directory, we'll call C:MyFolderMySubFolder. There can be anywhere between 1 and 366 files in this particular folder and I need all the sheets in each file labled 'CC' copy that entire sheet, paste that sheet to Book1, go back to that file it was copied from, close it (saving changes is ok), then move on to the next file.. and the next file... and so forth
While pasting into book1, I need each WS copied from each file to paste to a new worksheet in book1 rather than combining them into 1 or overwriting, and lable each of those sheets the file name of which the sheet came from...
The names are in sequence. All files in the folder will be labled as a date such as "9-6-12" so the sheet name in book1 would be named 9-6-12. (so there may result in 366 new worksheets to book1)
I primarily use Microsoft Office Excel 2003
need to create a macro that inserts 3 rows below each existing row of data and simply copies and pastes that data into each of the empty rows before moving on to the next unique row and doing the same thing again.
This is what I have so far, but I can't seem to get the loop right.
Rows("2:2").Select
Do
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
activecell.Offset(-1, 0).Select
Range(activecell, activecell.Offset(0, 5)).Copy
activecell.Offset(1, 0).PasteSpecial
activecell.Offset(1, 0).PasteSpecial
activecell.Offset(1, 0).PasteSpecial
Selection.Offset(1, 0).EntireRow.Select
Loop
I have an email sent via pdf and the only way to get this into excel is by copying and pasting and it all shows up in one cell.
Not much to focus on other than reading from left to right, once you see a numeric value, this should be in another cell and once you see "LS or WS or NR or COA, this will begin another cell. I had to add the dots to show where the new cell starts.
parsed data
SHELL TBN...130 CURACAO/JAPAN 18JUL... LS 3.675M PDVSA SUBS
EVERGLADES...70 CHIRIQUI GRANDE/USG14JUL... NR BP
TEXAS STAR...70 ECMEXICO/USG 11JUL... NR NR
MINERVA LIBRA...70 BAHAMAS/USG 11JUL... WS 80 STATOIL RPTD
original data
SHELL TBN 130 CURACAO/JAPAN 18JUL LS 3.675M PDVSA SUBS
EVERGLADES 70 CHIRIQUI GRANDE/USG14JUL NR BP
TEXAS STAR 70 ECMEXICO/USG 11JUL NR NR
MINERVA LIBRA 70 BAHAMAS/USG 11JUL WS 80 STATOIL RPTD
CPO ENGLAND 35 ECCANADA/OPTS 07JUL NR CREST ENERGY FLD
The problem: I am getting values when doing a pastespecial for formulas and formats.
Manually copying and doing a pastespecial with the mouse gives me the correct results. Below is code I got from the forum, "here", and am running in a test workbook.
Option Explicit
Sub Test2()
'
Dim rSource As Excel. Range
Dim rDestination As Excel.Range
Set rSource = ActiveSheet.Range("A1:C1")
Set rDestination = ActiveSheet.Range("A1").End(xlDown).Offset(1, 0)
rSource.Copy
rDestination.Select
Selection.PasteSpecial Paste:=xlPasteFormats, _
Operation:=xlNone, _
SkipBlanks:=False, _
Transpose:=False
Selection.PasteSpecial Paste:=xlPasteFormulas, _
Operation:=xlNone, _
SkipBlanks:=False, _
Transpose:=False
Range("A1").Select
Application.CutCopyMode = False
valKill:
Set rSource = Nothing
Set rDestination = Nothing
Exit Sub
End Sub
Does anyone know why I am getting values? What do I need to do to make this paste only the formats and formulas?
I'm trying to paste data from a website. It's in the format:
abcd abc abcd abc
abc abcdef abc abc
The data is separated by SPACES. There is a different number of spaces between the data on each line (not sure if that matters)
When I paste it into excel, each line comes through as one cell. Is there a way to tell excel to recognize the spaces as new cells?
Figured it out. Data --> Text to columns
I have an Excel spreadsheet with a query to an Access table. The query pulls data from 2 columns in a table and pastes it to the spreadsheet. I am trying to update the VBA a little on one sheet and now I get the attached error whenever the code tries to run in Excel. Here is the code with the offending portion separated at the top.
View 2 Replies View RelatedI have a macro that selects and copies and pastes a range of data from one sheet to another sheet. It works perfectly except it is pasting all the cell formatting and formulas and i only want or need the values.
View 8 Replies View RelatedI currently have the following code that copies a range opens notepad pastes the range opens save dialog and types the file name. The problem I have is with overwriting the existing file.
Range("A1:A202").Select
Selection.Copy
Shell "notepad.exe", vbNormalFocus
SendKeys "^V"
SendKeys "^s"
SendKeys "Total_IEDs_Hour_Of_Day_2009.xml"
SendKeys "{TAB}"
SendKeys "a"
SendKeys "{ENTER}"
Everything works fine to this point. Then it opens the do you want to overwrite dialog and I cant get it to hit yes.
I wanted to modify the below macro but don't know how. Could someone help me please? Please see the bold text below.
Dim shortmonth As String
Dim todaysdate As String
Dim enterdate As String
'GET DATE AND CREATE VARIABLES
enterdate = InputBox("Please enter the date in the following format: MMDD")
shortmonth = Left(enterdate, 2)
todaysdate = Mid(enterdate, 3, 2)
Workbooks.Open Filename:= _
"S:CMU Trade VerificationTrade Discrepancy Report " & [shortmonth] & " " & [todaysdate] & ".xls"
Sheets("Daily Archive").Select
***Do this step when when range A2:N2 is not blank, otherwise, run the "Daily Data" macro first and then do the below steps.
I am looking for a macro that will go to the next blank cell in the column starting at B3 and if none are found going to the next sheet(sheets are january-december). The twist is that I need it to change sheets when there is nothing in column A(which has dates and times in it) then go again to the next blank cell in the following sheet starting at B3.
View 10 Replies View RelatedI have a macro that runs when the user clicks on a button. I want it to run when a particular cell has data in it - after the user selects an item from a drop down. How can I make the macro trigger based on a cell being non-blank?
View 9 Replies View RelatedI have a customer data file in which some cells have been completed with x's and I need to replace any cell that contains x's with a blank.
I can easily do this when the cell contains a single x by using find and replace within the macro, but some customers have completed fields with xx or xxx or xxxx and so on - these x's may be in upper or lower case.
I can't just replace all instances of x (or X) with blank on partial cells as there will be company names or address details that will contain an x.
What I need is a way to identify cells that contain ONLY x character(s): so "x" would be replaced with blank as would "xx", "xxx" etc., but "XYZ Limited", "LOXX & Co." or "Essex" need to be left as is.
I can't even think where to begin on this. Anyone got any bright ideas or can point me in the right direction?
I am creating a excel worksheet for work. It will keep a record of telephone calls made for my office. I will upload the exported file from our switch to Sheet 1 (which works fine).
What I need to do is then have a macro that takes the information from coulmn A-K and row 5 thru 56908 if coulmn K equals Sheet 2 (and only sheet 2), and the copy and pastes it to Sheet 2. I have tried several different ways to do it but the macros just dont do it. The problems I have run across are that even if it says Sheet 3 it still pastes it to Sheet 2.
I Have the following macro conducting web queries. As the list of websites is spread out I need to get the macro to skip over blanks?
VB:
Sub Top5Investors()
'
' Top5investors Macro
'
'
Dim Erw, Frw, Lrw
Frw = 1
Lrw = Range("A" & Rows.Count).End(xlUp).Row
For Erw = Frw To Lrw
[Code]...
I have a worksheet that contains data but column E has blank cells. i want to automatically encode on the last blank cell in column E up to the last used row.
I am using the ff. code to select the last blank cell in column E:
Range("E1").End(xlDown).Offset(1, 0).Select
I am using the ff. code to select the last used row:
ActiveSheet.UsedRange.Rows.Select
but it doesn't work.
In my excel file, all i want to do is to encode "ECASE-UNUSABLE-UPD" in cell E61:1549 , wherein E61 = is the last blanck cell & E1549 = is the last used row.
provide me a macro to give a particular message or Cell Name when the cell is blank. I have to check around Eight columns and the starting row is A10. Moreover the sheet can have different numbers of row at different time like some time only 50 persons data will be there and some times 60 or 85 like this but the maximum will be 300. So if the 50 persons data is there than it should not warn about row 51 onwards.
View 1 Replies View RelatedI have a spreadsheet where I had a new column on a daily basis. I am trying to create a macro to automate some parts of this. I would like to select the next blank cell on row 1. So in this instance, cell M1, however the following day it would be N1. This is the part I am unsure of how to do. After this I will be doing a vlookup to add the new values, which I should be able to sort out no problem.
I have seen people using COUNT and OFFSET to select the last cell +1, however I am unsure how to link to two together.
I am try to write a bit of code which will find the non blank cells in column H (Range H4:H24) and when it finds a non blank cell make column C in that row the active cell and then run a macro. Once the macro as been run i would like it to look for the next non blank cell.
View 5 Replies View RelatedI would like VBA code to delete all rows where there are blanks in Col B
View 2 Replies View RelatedI've a file with lots of data. In that file I've some blank rows, I want a code which search complete blank row and delete.
View 2 Replies View RelatedI am looking for a macro to put No in all Blank cells in used range of a sheet.
View 1 Replies View RelatedI extract data from a database and export it to excel, the data has A-E Columns.
Then I run a macro to perform calculations based on columns A-E,
The macro results in creating columns F - K. I have specified to run the macro on columns F-K.
Now in the future I would want to increase my database and add in more columns for example F-Hand this would directly effect my macro.
Is there a way to specify in the macro to conduct calculations that is "F-K" after "A-H" that is as soon as you hit a blank column/cell?
I need to write a macro that will successfully delete blank rows. I also need to write a macro that will successfully delete duplicates. The duplicates are numbers and they do constantly change.
View 9 Replies View RelatedI am able create a macro using the find function to find the next blank row, but I would like to have it select a range of rows down that I can then delete. Each time I run the macro the next blank row may be different thant the last, so it can't be a set number of row numbers each time. I could also possibly use the print area function if it would be easier.
Here is what I have so far, what is in red is where I need it to vary from next active blank row down to R2001C14, and then delete all the active blank rows ...
I need a macro to delete blank rows from row 2, but excluding the last 4 rows where there is blank rows between the data
See example below where the rows containing blank cells after #2 in column A must not be deleted ...
I have searched the forum a few times and haven't seen an exact example of what I am trying to do, so I hope this isn't a duplicate.
I am looking for a macro to copy a cell and autofill it down the column until it gets to a non-blank cell. When it reaches that cell it needs to then copy THAT cell down until it reaches another non-blank cell... this could happen just a couple times, a couple dozen times, or only the very first time.
So for example:
In cell B2 there is text "Data1"
In cell B13 there is text "Data2"
In cell B25 there is text "Data3"
I would like the macro to search column B to find "Data1", and then copy it down the column until it reaches B13, then copy "Data2" down until B25, where it would then copy "Data3" down until the end of the document. The location of the data in column B varies, and the number of cells with data in column B will vary as well.
I wonder if soeone could change the following macro so that the bottomcell
is set to be as far down as there is content in Column "A". As it stands if I fill in blank cells in Column "C" and the last cell with data is say C10 it does just this. But if the actual last row with data in column "A" is A14 then cells C11, C12, C13, and C14 are ignored. C11, C12, C13, and C14 should be the same as C10 above them.
Sub FillBlankCells()
Dim topcell As Range, bottomcell As Range
Set topcell = Cells(1, ActiveCell.Column)
Set bottomcell = Cells(16384, ActiveCell.Column)
If IsEmpty(topcell) Then Set topcell = topcell.End(xlDown)
If IsEmpty(bottomcell) Then Set bottomcell = bottomcell.End(xlUp).Offset
Range(topcell, bottomcell).Select
Selection.SpecialCells(xlBlanks).Select
Selection.FormulaR1C1 = "=R[-1]C"
End Sub
Other macros recognize the actual last row.... but have issues with columns formatted as Text. The macro above doesn't create problems with columns formatted as "Text".