I want to perform a SUMIF if more than 1 condition is true. I can do a regular SUMIF if, for example, values in column A is > than 10,000, then SUM associated values in column F.
However, what if I want a SUMIF if values in column A is > 10,000, values in column B = “Yankees”, then SUM associated values in column F.
Here's a simplified example:
ColA
ColB
ColC
Row1
A
Y
A
Row2
B
N
D
[Code] .........
I'm looking to return the values in column A adjacent to the cells in Column B equal to "Y". The kicker has been returning only the cells where the condition is true. Column C displays the desired behavior.
The closest I've been able to get is with a simple IF statement but I'm pretty sure the answer is a far cry away from there and likely requires an array formula. I'd prefer not to use VLOOKUP or OFFSET but will if the alternative is very complex.
I need cell (O4) to display days overdue or days remaining on an assigned task based on subtracting due date (M4) from todays date, but only perform days subtraction function if (M4) is not blank and only if task complete cell (N4) is less than 100.
Have the conditional blank cell figured out, but nesting another condition for the less than 100 complete cell. So in other words, I don't want cell (O4) to subtract days and display any error, irrelevant data if there is not any due date entered or the task is entered as complete...
I've tried using the worksheetfunction.sumif route and couldn't seem to get the syntax correct. I'd prefer the worksheetfunction route, as I don't need the formula stored, but it would be great to have both of these pieces of code for reference online - I scoured Google, and the examples I found were pretty weak.
I've recorded the macro (hence the R1C1 references in the second example) and had it work perfectly, but when I replaced row references with my variables, it went back to displaying "TRUE." I'm including all the code here.
Variables:
expr = 3 to 38 (For loop)
startrow = the starting row for the reference data
endrow = the ending row for the reference data
thresh = minimum threshold (a number)
Syntax error here:
I have a row of values TRUE and FALSE from a IF statement..
If one or more are true can i get a notification to come up saying
"Rents are Due" Press ok to continue..
Below is the data layout. I want to join values in value column if Condition is true. SO, for below situation answer should come ACE.
TRUE
A
FALSE
B
TRUE
C
FALSE
D
True
E
I have following excel sheet.
IF condition is true then popup message window with Remark of corresponding columns.
Example : if during market time if Google current price fall below 295 then message window will appear SELL : Day support is break.
===============================================================================
Script--------------Current Price--------------Trigger Price---------------------Remark
===============================================================================
Axis Bank--------------500----------------------502-----------------------Buy : Resistance Break
Google-----------------300---------------------295-----------------------Sell : Day Support Break
HCL--------------------850---------------------865-----------------------Buy : First Sunrise Confirm
INFY------------------3215--------------------3150-----------------------Sell : Weekly Support Break
Current Price will keep moving up / down in live market
if current price > Triger price then popup window should come with BUY & Remark of that row
if current price < Triger price then popup window should come with SELL & remark of that row
Is it possible to have excel continually check if a columns used row count in a particular column is greater than a number before moving on to the next part of code?
The reason I'm doing this is because one formula will pull in data from bloomberg which can take some time (5 seconds or so).
Some other code that places formulas into other adjacent columns depends on the number of rows in the first column. So the code following the data pull wil fail if the above hasn't finished pulling yet.
I was thinking about doing something like a do nothing until true?
Here's what I have that is not working:
Do Until Range("A1:A6").Cells.SpecialCells(xlCellTypeConstants).Count > 5 Range("F1").Select
Loop
I expect that the number of used rows in column A should be greater than 5 once data is pulled. In this case I just had VBA select F1 until the count was greater than 5 before moving on. but I think it's interfering with the pull and will coninue to loop..
I'm looking for some help. I need a function that can check if each of two seperate values is less than one. If less than one then divide by 2. Then give me the average of these two values. So it could be that it takes 0.5/2=0.25 for one value and 3 for another to give me the average of 1.625.
I have two formulas that I have worked out to deliver the results independently. I would like to join them together into one formula and add an If condition that if the two match then add a "+" to the end of the string.
#1 finds the base value :
=IF(ISERR(FIND("/",I2)),I2,LEFT(I2,FIND("/",I2,FIND("/",I2)-1)-1))
#2 verifies the value is a valid color:
=INDEX(M1:M41,MATCH(J2,M1:M41,0),1)
I would like to join the two formulas together and if they match then add a space, " " and a "+" to the end of the string. If there is no match then return the base value.
Can excel be made to play an alarm if a condition becomes true?
View 5 Replies View RelatedIn E5, put "INSERT". In G5, put the formula
=E5="INSERT"
Should I be getting TRUE as the result? I'm getting FALSE. Is something wrong or am I going mad...
I need to copy the row data from sheet1, if the DEPT is HR and paste the same into sheet 2.
Qus:
data table ( Sheet 1)
SLEMP IDDOJ DEPT
1123419/17/2010HR
2123429/17/2010HR[code]......
I need to copy the data form Cell "C" to Cell "D" only if Cell "D" is empty
i have been using the following code but it will overwrite cell "D" regardless if data is present or not.
I have "borrowed" the below code from a previous solved post, however am unsure how to adapt it.
View 7 Replies View RelatedI've been looking for a way to get the needed result without using macro but i think it can't happen. I'm using excel for forecasting
I need a formula or script to Vlookup a value for me from another sheet if depending on the date.
If the Today date is > then the Date mentioned in Cell A1+15 days i want A2 till A167 to run a formula that would lookup a certain value in another sheet and replace the current value in A2 till A167
For example
A1= August
A2 = 20
A3 = 40 ......
I want when im in 15 August a formula that will replace the foretasted quantity 20 with the real quantity found in sheet 2. If I am not 1 August i don't want the formula to run.
if there's a macro that can be run to check one worksheet. In this worksheet there is a column where the value should be "true". If this value is true, I'd like to copy the entire row of data into another worksheet.
There can be multiple rows of data where this condition is met.
I would like to know if there is a way to change the font type in a cell, if a condition is true in another cell. e.g font in cell C3 is Arial Rounded MT Bold and if condition is true in cell F3 then font is changed to Arial Narrow.
View 8 Replies View RelatedI'm trying create a Sum(If formula with 2 conditions, but whatever I try doesn't seem to want to cooperate. I want to add up the sum of all invoices according to the country they deal with and the month that they were created in. I've attached a sample file showing what I'm trying to accomplish. Here is how far I've gotten so far: =SUM(IF(Main!$L:$L;B21*Main!$Z:$Z;C20);Main!$H:$H)
I've tried other forms as well but even though this only returns #Value!, at least the formula is accepted.
Is there any way to use sumif with or , in other words to put more than one condition to execute the sum process
like this way :
+ sumif(search range;condition1;condition2;sumrange)
I tried but I had an error.
There is a function sumif() that is used for do sum() under condition
Nevertheless, if I want to do max() under condition, how can I do?
There isn't a function maxif().
When you filter a spreadsheet, you can find results that are similar to a condition. I have families of products that share a common 3 digits, but the rest of the model number is different. The 3 similar digits could be the first 3 digits, or it could be 3 digits starting with the 2nd digit. This spreadsheet has each complete model number on its own row. In that row is a number that represents a volume. I want to be able to sum the volume column if the model number contains the 3 digits.Model Number
Volume
A hat
5
B hat
1
A glove
4
hat
8
In the above example, the total for "hat" = 5 + 1 + 8 = 14
I would type in a condition (family name) into another cell (D1) and the formula in D2.
Is there a way to have a sumif formula dependent on two conditions?
View 9 Replies View RelatedI have a problem with a SUMIF statement. I think it is =SUMIF(AND(...
I have attached I want to sum in column E lines 255-316 if in cell D 34 and if cell B25 equals GL and cell C255 equals 0001.
Maybe this would be handled better with a sumproduct formula...
As a starter in VBA i have a lot of doubts... one of them is, how can i sum in a column the cells that are bold? i've thought that sumif was the trick, but i don't find the way to be able to adapt code.
View 2 Replies View RelatedBelow is my function.
="Profit $"&SUM(IF(Sold!D15:D8998<>"",IF(MONTH(Sold!D15:D8998)=A4,Sold!H15:H8998)))
I would like to edit this function to also count profit only if Cell A15:A8998 in my Sold sheet has the words "Shipped". The text value Shipped is not a text value I entered, it is automatically written based on a Vlookup formula I created.
I have a worksheet where two columns of data are written. In another worksheet I have a list of data in one column. In column next to it (so the rows are the same) I am trying to write a list of sumif formula, where the range is first column of the first worksheet, condition is a value of the cell next to where I am writing the sumif equation (list of data) and the sumrange is the second colummn in the first worksheet. I can't get it. I tried with --- "C" & i --- but I get an error saying expected:end of statement. It goes like that:
View 2 Replies View RelatedI currently have a Row with this value
row1 lh lh lh
row2 8 12 8 5 2
First I will need to check if the column has an "lh" if true then sum row2, however i will need a second condition that will check that if >8 it will use the value 8 instead of 12.
However if value is<=8 get that value from the cell.
In this case the correct answer is
8 + 8 + 5 = 21
8 (because it is <=8 get the value from the cell) + 8 (because 12 is>8 use the value "8") + 5 (because <=8)
I want use the formula sumif...something like that! =SUMIF(I77:I176;AND(>F1092;<F1091);Q77:Q176). I want sum the values between q77:Q176 if the value in i77:i176 is >F1092 and <F1091 But the multiple criteriun don´t work in the sumif.
View 8 Replies View RelatedI am trying to set up a sumif statement with two criteria where if the second criteria is true, the total in the sum range returned is divided by two.
I currently have this:
=SUMIF($G$6:$G$41,"digital",I6:I41)
I want to add in "digital/creative" as a second criteria (from the same criteria range) but I only want 50% of the result of these to be totalled.
is this possible?