I have a Macro below that copies a range of cells from my Formulas Sheet to my Report Sheet.
The problem is that it is copying over a blank row.
I can't figure this out.
Anybody know how to stop sending over the blank row?
Here is my ...
I am trying to do is copy two ranges of data from one sheet and past the values to one other sheet. The trick is not having the data overwrite each time the macro is run (I need the data to be pasted to the next blank row). Also, as there are two ranges of data to be copied, I need to define which rows the paste is to start at e.g. copy data from sheet 1, Range("B8:M8") and paste to the next blank row on sheet 2 starting a cell "A3" AND copy data from sheet 1, Range("B9:M9") and paste to the next blank row on sheet 2 starting a cell "A20".
I've managed to get this far (see below) by pasting the data into two separate sheets but cannot work out how to modify the macro so the data can be pasted into a single sheet with conditions outlined above.
-----------------------------------------------------------------------
Sub Stats()
Application.ScreenUpdating = False
Dim NextRow As Range
Set NextRow = Sheets("Past Stats Mar to Aug 2010").Cells(Cells.Rows.Count, 1).End(xlUp).Offset(1, 0)
Sheets("Current Stats Mar 10 to Aug 10").Range("B8:M8").Copy
NextRow.PasteSpecial (xlValues)
Dim NextRow2 As Range
Set NextRow2 = Sheets("Past Stats Mar to Aug 2010").Cells(Cells.Rows.Count, 1).End(xlUp).Offset(1, 0)
Sheets("Current Stats Mar 10 to Aug 10").Range("B9:M9").Copy
NextRow2.PasteSpecial (xlValues)
Application.CutCopyMode = False
Application.ScreenUpdating = True
End Sub
-----------------------------------------------------------------------
I am looking for a Macro which can transfer data from sheet 1 to the first available empty row on sheet 2.
For example, I have data in the following cells on sheet 1: B2, B4, B6, B8, and B10. I want to transfer this data to the first available empty row into cells A1, B1, C1, D1 and E1 of sheet 2. The cell number is ofcourse depending on the first available empty row and could thus be 2, 3, 4, 5 etc.
I also want to delete the data from the original cells in sheet 1 after the data has been transferred.
I have a couple of spreadsheets that requires me to copy data from Sheet 1 that matches certain criteria to Sheet 2.
I have tried using posted VB codes that have been written for other people but they dont seem to work (this is probably to do with me not actually knowing what I am doing, as I am not sure what I should be replacing and what I need to be deleting etc out of the pre-written code )
I need to be able to search on column e in Sheet 1 for anything that has just h written in the cell and then copy all the rows that match into Sheet 2. I also would like to ensure that when it is copied it doesnt go in row 2 but maybe 4 or 5 as I have quite allot of headings.
I made a macro to copy data from my data entry sheet to my database sheet:
Code:
Private Sub CommandButton1_Click()
Application.ScreenUpdating = False
Dim NextRow As Range
Set NextRow = Sheet4.Cells(Cells.Rows.Count, 1).End(xlUp).Offset(1, 0)
[Code] .......
The main to problems are that its not pasting in in the right collum and its not passing the next entry in the next free row.
Have attached a screenshot of the two sheets, at the sheet has some personal data, i won't be able to upload it.
I'm trying to create a macro that examines a sheet of data, and if the data in a certain column (column P) contains either A,B, or C then it would copy the entire row over to another sheet. If it contained a blank or D,E, F, etc,etc then it would just ignore that and move to the next row.
I have no idea where to start, i've searched google and here on Mr.Excel.
I browsed through the other posts concerning copying and couldn't find (or maybe I didn't just understand) how to do what I want. I looking for a macro for a comand button that when pressed copies certain cells in the active row to another sheet. I recorded a macro for what I wanted to do ( to make the explenation easier) for one row but even the recorded macro refuses to work.
I'll put the recorded macro here if it helps someone, but as I said even that doen't work
Private Sub Kopiering_Click()
Range("E3").Select
Selection.Copy
Sheets("TOTAL").Select
Range("K3").Select
ActiveSheet.Paste
Sheets("BRL Newbuilding").Select
Range("D3").Select
Application.CutCopyMode = False
Selection.Copy
This is a paricular problem I'm having in the middle of lots of problems, hoping you can help.
I had created a macro to transfer information from a sheet into a seperate sheet, for storage.
I have sinced changed the data entry sheet to use comboboxes instead of normal text, as it was important to ensure the text is entered identically each time. Now, however, my macro transfers the numerical position on the list of data for the combobox instead of it's value
I'm never done a macro before and of course I'm very new to excel. I have a worksheet for lessons learned that have multiple sheets for each state. I want to create a macro that every time I enter a new data into a row and hit "Add to summary sheet" and it copy and paste the the next available row in summary sheet.
See the attached file for my workbook : Book1.xlsx
I am currently working in an excel file for which i want to create a macro. I am using colomn F as the base from which it should be determined whether a row should be copied. In colomn F the user can select three options through data validation. If 'completed' is selected, the whole row should be copied to the second sheet, and each copied row should be pasted to the next empty row. The data on the source sheet starts at row 11 and should be copied to sheet 2, starting from row 11 as well.
View 5 Replies View RelatedI have a sheet made into a form with some check boxes included. If I select all the relevant columns, create a new sheet, and paste into cell A1 - all of the information carries over just fine. You can still select cells and check the boxes in the new sheet.
However, when I record this action as a macro, using the macro produces a picture of the selected columns instead of actually copy/pasting the information. I can't click on the cells or check boxes. I can only move the picture around within the new sheet.
I am working on Excel document(Microsoft office-2007) with 2 sheets(Sheet1,Sheet2).
In sheet1 i have a dropdown list and the respective data is saved in Sheet2.On selection of dropdown lists in sheet1 ,respective rows should get copied from Sheet2 to Sheet1.
I am having trouble with the macro command. This is a first for me and I am stuck. I just dont know the how to write the Macro for this.
Worksheet 'Raw' has a few rows of Data that get send to 3 different sheets based on the Account# in Column A. The Date Column always shows 1 date, as the values are for different products on the same day.
The Code starts of by checking if any value in Column AG has a '#N/A' value, If it does then the macro will give a message and exit. However I'm getting a row of 'N/A' values in Sheets 101,201 and 301. If there is an N/A value in Column AG i dont want the macro to do anything.
2nd issue - I need to adjust the macro so that it copies these values into the Next Empty Row in sheets 101,201 and 301, not to overwrite the previous row there. I think somthing like the following code may be required but I couldnt make it work
I need to start from its most basic so i can see what the macro is doing & then adapt.
See attachment.
This will take the form of a button to be clicked on in sheet1.
Sheet1 is my input sheet, sheet2 is my history sheet.
I want to copy the cell range B4:F9 in sheet1 into sheet2 - starting from cell C3.
Next time i click the button, copy the cell range B4:F9 sheet1 into sheet2 again, but underneath the data already there in sheet2
Each time i click the button it just keeps adding the data in sheet1 into sheet2, to form a history.
I have a spreadsheet that people enter in their daily production numbers. In this spreadsheet, I would like them to hit the "save" button and it will put the total into a cell below that date. If they hit "save" multiple times during the same day,
I want it to overwrite the cell below the date. For the next day of production, they will need to do the same thing, except paste the data in to the cell below that current date.
I currently have created a form for the user to fill in details on my sheet. My idea is that when the user clicks a button, the macro will take that piece of text and populate my other sheet into the correct column. Therefore the task I am trying to resolve is copy the text into a field and then if the user clicks copy again, the text will fill into the field below as it is empty and so forth until the user has finished entering values. I have the following setps in pseudocode below but having trouble converting it to a macro!
View 2 Replies View Relatedi have sheet that looks similar to this one but larger:
a
b
c
d
e
[Code]...
My goal is to copy headers from columns c, d, e to column b when cells have values.
Here is what i try to accomplish:
a
b
c
d
e
[Code]....
I am currently trying to adapt the Macro I created that copies and pastes from one work sheet to another. I need to paste to the first empty cell in A column. See the code I have listed below.
Sub Button15_Click()
Selection. AutoFilter Field:=1, Criteria1:="<>"
Range("A2:E78").Select
Selection.Copy
Sheets("WorkSheet").Select
Range("A17").Select
ActiveSheet.Paste
Range("C17").Select
Application.CutCopyMode = False
Range("A1:E13").Sort Key1:=Range("A1"), Order1:=xlAscending, Header:= _
xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
Sheets("XH & HVYR").Select ..........
I want to copy the current region on sheet 3 and paste that into sheet2 starting with cell E4. But I don't want to actually use the copy method. I believe there is a way to do this. I was thinking the following:
[Code] ......
The idea I had was to simply state that cell E4 would be assigned the value of CurrentRegion on sheet 3. Is there a way to bypass the copy method?
If not, how to copy, then paste?
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
I have a macro that copies all my sheets onto a new sheet called combine. It is pasting onto the combine sheet starting on cell A2 instead of cell A1. Following is my macro.
Sub Combine()
Dim J As Integer
Sheets(1).Select
Worksheets.Add
Sheets(1).Name = "Combined"
On Error Resume Next
For J = 2 To Sheets.Count
Sheets(J).Activate
Range("A1").Select
Selection.CurrentRegion.Select
Selection.Copy Destination:=Sheets("Combined").Cells(Rows.Count, 1).End(xlUp)(2)
Next
End Sub
I have a worksheet which contains certain sections. I want to create a macro which will run if data is input into those sections. This macro should copy whatever was entered into another worksheet automatically as data is being entered. Is there a way for that?
View 8 Replies View RelatedIn the attached worksheet I have UserForm2. When I click on open compare form button on the menu sheet it opens UserForm2, I would like the information I select in the first 7 combo boxes Vegetable - Ball on UserForm2 to loop through the data in the database sheet Columns A:G and compare the entries to the non empty/not blank cells in each row. If the form contain data that matches all the non empty/not blank cells in a row in the database sheet then it is a match and should show the label and display the message. If the form entries does not match to the non-empty/not blank cells in any of the rows on the database sheet then do nothing.
The problem I am having is getting it to loop through the sheet and bring back the right results. It is only matching on row 2 of the database sheet when I select cabbage in the vegetable combo box and apples in the fruit combo box . I cannot figure out how to get it to loop through all the rows for the range I want to compare (A2:G7) - I need this range to be flexible so as data is added it will expand to read all added rows.
The code is on the btnSave_Click() for UserForm2
I attached the spreadsheet and I am explaining what I want to do and the expected result.
Fruit
Fruit Type
Vegetable
Games
Toys
Cereal
Ball
[Code] .....
What I want to do is loop through the Database sheet and if the fields on the form contain all the values in any row of the Database sheet, excluding empty cells in the Database sheet, then display a message.
So if on the form I selected Broccoli fron the vegetable combo box, Cricket from the games combo box, puzzles from the toy combo box, bananna from the fruit combo box, grits from the cereal combobox, and baseball from the ball combo box, in the databse sheet tabel shown above the match would be row 6 since the values for vegetable, game, toy, fruit, cereal and ball on the form matches what is on row 6 of the Database sheet. It does not matter what other fieds are selected /filled in on the form, the match should only take into consideration the populated cell in each row of the database sheet.
So, if the user enters Apples in the fruit combo box and Cabbage in the vegetable combo box but had blank or something other than bike in the toy combo box on form it would be a match to the Database sheet row 2, regardless of what the user enters in the remaining fields on the form
If the user enters Berries in the fruit combo box, Blueberry in the Fruit Type Combo box, Carrot in the vegetable combo box, and Grits in the cereal combo box it would be a match to Database sheet row 3, regardless of what the user enters in the remaining field on the form .
If the user enters Apples in the fruit combo box, Cabbage in the vegetable combo box, and Bike in the toy combo box on form itwould be a match to the Database sheet row 5, regardless of what the user enters in the remaining field on the form .
If the user enters Grape in the fruit combo box, Carrot in the Vegetable combo box, Cards in the game combo box, and football in the ball combo box on the form it would be a match to Database sheet row 7, regardless of what the user enters in the remaining field on the form.
If the user enters Kiwi in the fruit combo box, Cabbage in the vegetable combo box, and Bike in the toy combo box on form it would NOT be a match to the Database sheet because the Database sheet does not have a row that contain Kiwi, Cabbage, and Bike.
So basically, if the entries on the form match the exact values for all the non-empty (blank) fields for any row in the Database sheet, then it is a match.
-If the entries on the form do not contain an exact match to all the non-empty (blank) fields for any of the rows in the Database sheet, then it is not a match.
-If it is a match show the label and display the message box
-If it is not a match the do nothing
I am trying to create a macro so that when i save an entry the form sheet looks in the tavela master sheet to see if there is a match on the record number (in the A column) and saves there as an update if it matches and then if there is no match, saves it in the last empty row. this is a column to row copy so it has to be paste special to transpose. also i have a password on the sheet which i use to unprotect then reprotect. i have successfully done these two things separately but cannot combine them! i know not very much about visual basic code just what i have read here and so i am trying to make this code work.
Code:....
I want to do is add data into Sheet A each day then press a button which will copy the data in a range and paste it into Sheet B, but I want to create a list of all data so I need it to find the next empty cell and start the paste from there (if that makes sense).
I want it to create a data base on one sheet from a daily import, I have a code to copy one cell to next empty cell but dont know how to duplicate it to a range.
I hope I have given you enough info this is what I have done so far
Public Sub CopyData()
Dim ws As Worksheet, bi As Byte, vData(1 To 1)
Set ws = Sheets("A")
For bi = 1 To 1
vData(bi) = Application.Choose(bi, ws.Range("A1"))
[Code]....
I have workbook that has several sheets within the workbook that are set up identical. Each of the sheets in the workbook are for a specific company.
As of right now I have been adding a sheet to the workbook that is an overview for what is in each sheet (the individual companies). Currently I am doing the formatting of the heading and column names manually and I pull the data from each sheet with a VLookup. I have been trying to enhance my VBA skills with coding something that will fill in the appropriate cells from worksheet to worksheet.
What I am trying to do is to populate an overview sheet with cells C24, C25, and B36 being static on each row per sheet. Then each row will be populated with cells C(36, 59, 70, 81), D(36, 59, 70, 81), F(36, 59, 70, 81), G, and H(36, 59, 70, 81). The overview sheet will have the diagram below in a ru
I attached an example : example.xlsx
Sheet 1
C25
C24
B36
D36
C36
F36
G36
H36
I36
[Code] .....
I am copying a large sheet into a spread sheet. The problem is one of the columns contain numbers with some cells having an asterisk at the end of the number. This causes problems with the formulas on other sheets that use this data. Can I use a formula or what is the best way to eliminate the "*".
View 4 Replies View RelatedI have copied a sheet, moved it to the end and renamed it with a date that is in cell "A1"
Now after that process is finished I need it to update the date in cell "A1" of the newly created sheet with the next day's date.
I am stuck however referring to the previous sheet to update the date value in "A1"
I am currently working on a script that will copy some data from one sheet to another, but I keep getting the following error message:
Run time error: Object required
at
Set uRng = .Range("F1", .Range("F" & .Rows.Count).End(xlUp))
What could be causing it?
I have a userform which clones the latest sheet and produces copy of it on the next sheet. The first sheet they will be cloning is the sheet called 'template', I however want this to be hidden since I do not want anybody to modify a sheet which basically serves purpose of a template. And once cloned, it is no longer needed.
On the click of the command button, the macro will create sheet1 taking the info from sheet named 'Template' in the same workbook . And now on the next click of the command button, Sheet 2 is created taking the info from sheet1 and Sheet 3 is created taking the info from Sheet 2 and so on. Here is what I currently have, so how can i modify it in order for my scnerio to work?
To select the last sheet in the workbook
Code:
Sheets(Sheets.Count).Select
To create new sheet
Code:
Sheets(Sheets.Count).Copy After:=Sheets(Sheets.Count)Sheets(Sheets.Count).Name = MyEvent & " " & MySCN & "(" & ThisWorkbook.Sheets.Count - 2 & ")"