I currently have created a form for the user to fill in details on my sheet. My idea is that when the user clicks a button, the macro will take that piece of text and populate my other sheet into the correct column. Therefore the task I am trying to resolve is copy the text into a field and then if the user clicks copy again, the text will fill into the field below as it is empty and so forth until the user has finished entering values. I have the following setps in pseudocode below but having trouble converting it to a macro!
Is it possible to make a cell "really" blank/empty based on an If statement? For instance:
=if(a1>10,a1,"")
Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.
So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.
Is there any way to tell Excel to make the cells truly empty?
I’m trying to make my life a bit easier, by adding a few macros and formulas to the spreadsheet (Everything was done completely manually before I got here!!!). What I would like to do is take two columns, which contain a start and end time for work shifts, and colour them GREEN once I have entered a name in the Worker column (Along side the two with the time), and also to fill a cell with a Yes or a No. I’m aware of auto conditioning, and I’ve tried to have a play to get this to work, but I just can’t work it out. I have posted a link to an image which shows what I want. I hope I've explained it well enough!
I am caught in an areas where I have learned how to find the next available empty row by going far down my worksheet, counting up until I reach a filled row and then offsetting that value by 1 as seen here below:
My difficulty lies in assigning the cells in this empty row the data a user can input in my text boxes; let's say there are 4 text boxes which need to be put into the following cells:
Text box 1 (Text value) needs to be assigned next empy cell in column: AText box 2 (Text value) needs to be assigned next empy cell in column: B (1 offset away from A)Text box 3 (Numeric value) needs to be assigned next empy cell in column: F (5 offsets away from A)Text box 4 (Numeric value) needs to be assigned next empy cell in column: H (7 offsets away from A).
How would I go about using my identified "NextRow" and then plug in these text box values into their appropriate cells down that row?
trying to add cells together that contain time (hours and minutes). The cell containing the total formula shows the #VALUE! result when and only when one or more cells being added do not have a value in them.
The times have been entered as actual times of the day, formatted for AM/PM.
A simple adding formula works fine, but all cells must have a value in them to obtain a valid result.
Is there a way to auto-populate all of the empty cells with the word "Need to Review" in a cell range (A1:A250)? Once any of the cells in this range is populated, whatever is inputted should house the cell.
When choosing ascending or decending, is it possible to always keep rows with the designated blank cells at the bottom? Trying to prevent the blank cells from popping on the top when i filter by a certain field.
I have to fill out forms for work and some of the info is the same and isd put on seperate sheets. On sheet one I have cells with the information that is the same on the different forms on shhets 2 and 3 i have the forms.
here is what i have having problems doing. 12-47136569 13x129077
How can i do a formula that copies the above values exactually to a cell ona another sheet
I have a list of about 600 addresses that need to be reformatted with a space following X character and need to be in all caps. This would be the more tedious way because I would still need to search the other file to make sure the text itself is correct. I saw on a different forum that this line would work in adding a space
(=REPLACE(A1,5,1,MID(A1,5,1)&" ")) but I need to add two spaces and adjust the location of the space so that it is following the first string of text.
The other approach could be to set up a formula or macro that searches the other file with a section of the original text and replaces that string.
Worksheet 'Raw' has a few rows of Data that get send to 3 different sheets based on the Account# in Column A. The Date Column always shows 1 date, as the values are for different products on the same day.
The Code starts of by checking if any value in Column AG has a '#N/A' value, If it does then the macro will give a message and exit. However I'm getting a row of 'N/A' values in Sheets 101,201 and 301. If there is an N/A value in Column AG i dont want the macro to do anything.
2nd issue - I need to adjust the macro so that it copies these values into the Next Empty Row in sheets 101,201 and 301, not to overwrite the previous row there. I think somthing like the following code may be required but I couldnt make it work
I have a spreadsheet that people enter in their daily production numbers. In this spreadsheet, I would like them to hit the "save" button and it will put the total into a cell below that date. If they hit "save" multiple times during the same day,
I want it to overwrite the cell below the date. For the next day of production, they will need to do the same thing, except paste the data in to the cell below that current date.
I am trying to do is copy two ranges of data from one sheet and past the values to one other sheet. The trick is not having the data overwrite each time the macro is run (I need the data to be pasted to the next blank row). Also, as there are two ranges of data to be copied, I need to define which rows the paste is to start at e.g. copy data from sheet 1, Range("B8:M8") and paste to the next blank row on sheet 2 starting a cell "A3" AND copy data from sheet 1, Range("B9:M9") and paste to the next blank row on sheet 2 starting a cell "A20".
I've managed to get this far (see below) by pasting the data into two separate sheets but cannot work out how to modify the macro so the data can be pasted into a single sheet with conditions outlined above.
----------------------------------------------------------------------- Sub Stats()
Application.ScreenUpdating = False
Dim NextRow As Range Set NextRow = Sheets("Past Stats Mar to Aug 2010").Cells(Cells.Rows.Count, 1).End(xlUp).Offset(1, 0) Sheets("Current Stats Mar 10 to Aug 10").Range("B8:M8").Copy NextRow.PasteSpecial (xlValues)
Dim NextRow2 As Range Set NextRow2 = Sheets("Past Stats Mar to Aug 2010").Cells(Cells.Rows.Count, 1).End(xlUp).Offset(1, 0) Sheets("Current Stats Mar 10 to Aug 10").Range("B9:M9").Copy NextRow2.PasteSpecial (xlValues)
Application.CutCopyMode = False Application.ScreenUpdating = True End Sub -----------------------------------------------------------------------
I am currently trying to adapt the Macro I created that copies and pastes from one work sheet to another. I need to paste to the first empty cell in A column. See the code I have listed below.
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
How I can look up non empty cells as shown in the below tables by use of a formula (I guess shifting data to the left without any empty cells between the data)?
why when a column is copied do blank cells no longer become blank. i have a macro below that writes data to a column based when cells are balnk it skips them. it works great except for when you copy a column the cells are no longer blank.
Sub RET_DATA() For i = 1 To rs.Range("L65536").End(xlUp).Row Lastrow = Range("A65536").End(xlUp).Row Cells(Lastrow + 1, 1) = rs.Cells(i, 17) Next i End Sub
I am trying to make the cells Iam am copying paste hidden cells with all formats - seems to work fine other than the security part of them, Iam makeing a sheet for work and just trying to make it were it will not get destroyed by other users-
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
I have a recordset that I get from Access and dump it onto an Excel spreadsheet. Many cells look empty but when I run a macro that depends on if these cells are empty it considers them not to be empty. Does anyone know what Access is putting in these empty cells?
I wish to copy a merged cell (3 cells) based on if only 1 of 3 cells to the right contain "X". if the top cell does not contain "X" than the merged cell is not copied. Also, is therea more elegant to copy 3 columns at a time rather than do one at a time as my code shows:
Sub CopyICUCAPU() ' ' CopyICUCAPU Macro ' Dim i As Integer
Working in Excel 2007. I am using excel for a data log (basically) and want it to format all empty cells in a row yellow if there is data in column A
Basically, If i have a value in A2, I want any empty cell between B2-G2 to be filled in yellow (as an idicator to the inputter that the cell needs to be completed).
there is already conditional formatting on these cells, which i want to maintain for the non-empty cells. I also have "0" as a value, so I couldn't use the basic conditional formatting setting it =0, it highlighted cells with $0.00, which i do not want.
I have data on 400 rows. Each row has a maximum of 10 cells with data, but many have empty cells with no data. I would like to sort each row to show values of cells in sequence and eliminate empty cells. I can use the sort row function but its a long process for 400 individual rows. Is there an easier way?
I have a spreadsheet where a column has many cells being empty and others with values. I need to use copy-paste skip blanks to another column so it only overwrites cells that contains values. BUT The cells in the column appears to be empty, not blank, when I try use the copy-paste skip blanks it doesnt work. However, when I press delete in every empty cell the copy-paste skip blanks works for those cells.
Do you got a fast method to make all the empty cells blank?