I have excel sheet with filtered columns. I will do the filtering manually and after selecting a filter, I want the visible data on the sheet to be saved as PDF file.
Please note that I dont want any range to be saved as PDF but visible data because as the filter changes, so as the data will be either less or more.
I'm working with a large master list of part numbers, and matching data to these numbers from a varying data table via vlookup. I have to vlookup to the actual part number, (13,000 numbers), then subtotal the data based on the "Rollup" part number. (eg: Two different old PNs have now "rolled up" into a single part number. I am pulling sales data from all of the old numbers, and subtotaling the sales to the new number.) Too much information.
Here's my issue. After subtotaling on the rollup number, I want to copy and paste ONLY the rollup numbers and associated data to a different sheet. This should be easily accomplished by going to level 2 of the subtotals page, hiding all the old PNs and their data, selecting the remaining visible cells, then "Go To", "Special", "Visible cells". Normally, you could copy only the visible cells, and paste them wherever you want. But because of the total length of the subtotaled worksheet, (nearly 25,000 rows), I get the error message, "Micrsoft Excel cannot create or use the data range reference because it is too complex."
You can overcome this by selecting smaller ranges of data, and copying and pasting a little at a time, but since the "visible rows" will vary, I can't figure a way to incorporate this into a macro. I've tried setting specific ranges in the macro, and copying and pasting fewer cell at a time, but if the range named in the macro is a hidden cell, the macro won't select any of them.
Here's an example of what I've got so far. I realize it's not the most efficient code, but I'm working with limited knowledge and ability.
I need a macro that can change the text in Field 46 from Criteria1 to something else, ie from "To be capped" to "Capitalised". This is my current
Selection. AutoFilter Field:=39, Criteria1:="OPEN" 'STATUS
Selection.AutoFilter Field:=46, Criteria1:="To be capped" 'TYPE
Range("AT1").Select
how to change the text only on the selection found by AutoFilter?
I have been searching for a macro that would lock all the non blank cells (cells that have any value/text) after the workbook is saved.
When the user clicks on save a message box should prompt stating that "The data you entered has been locked successfully".
I have a spreadsheet that imports data, manipulates it then deletes 2 of the sheets then saves the file under a different name to the network. Is there any way to save this new worksheet without it storing the macros - so when the user open it, only the data is there and they get no prompt to enable macros?
View 6 Replies View RelatedEvery time i do a filter and copy a data. Keep the filter on and past in another column. The data does not copy just into the visible cells. It pretend the filter is not there.
I have tried selecting only vible cells when copying and pasting into cells by selecting only visible cells but does not seem to work. Get the error message "command cannot be used on multiple section". There must be a solution but looked on the web and really cannot find one.
Table below so i filter out the "a" so i just have numbers then want to past into vible cells.
CopyPaste ResultsResults wanted
111
a2
232
a4
33
a
44
I am using code to filter my 4 sheets Greater then 0 (zero)
After apply above filter now i need to copy multiple rows and paste on another specific workbook for paste i m using below code:
for 1st sheet with the name ("V2")
for 2nd sheet with the name("LV")
For 3rd sheet with the name ("F2")
and 4th sheet with the name("L2")
If I play above code one by one all is going very well,,,,,,or if use in this way all is going very well
But here is a big problem..........if any sheet have no value greater then 0(zero)....then code paste all data... e.g shssts("LV") .Range("C5:C54").Copy but C5:C54 have no data greater then 0(zero) and it will paste on another sheet c5:c54 and again new sheets data will paste below the c54 while c5:c54 have no data.
So I want if any sheet have no data with range is greater then 0(Zero) then skip the copy paste code or use like SpecialCells(xlCellTypeVisible) .
I have written two VBA programs around the same time. Both run on open and pull external data and create graphs. My problem is that I want the end user to be able to run the report multiple times by choosing the name of the macro from the Excel macro menu (i.e. Tools>Macro>Macros) but only one of the workbook macros shows up on the menu. why the other macro is not visible on this menu???
View 2 Replies View RelatedI have a macro which autofilters a range of cells.
I can count the number of visible rows by using the following code
Code:
lcountActive = Range("BC34:BC" & x).SpecialCells(xlCellTypeVisible).Count
What I would like to do is both calculate the Average value of the visible cells and the Sum as well. I have tried to adapt the code I have but my knowledge is just not good enough to do this.
Need to correct code to resize all visible rows on a sheet based only on the text in the visible columns. I have tried the below code but when it resizes it is using the largest amount of text in the rows including that in the hidden columns.
View 3 Replies View RelatedI have a table of data with a filter on the top and a sum total at the bottom. Whenever i filter the list the total at the bottom doesnt change. how do i change it so the sum only calculates the visible cells?
View 3 Replies View RelatedI have a large spreadsheet that I am using multiple drop downs in to sort for
different scenarios. I do not want to use the general data subtotal command
but each time I sort I want to get a total for the visible cells -
I have finished a huge project. The final step is sending emails.
I have a filtered range. The email .HTMLBody is formed using the visiblecells, and forms an object called 'rng'
Only problem is - now I want to add my attachments. Within the visible range, the URL of the attachment is available (column 5).
So need a loop to do for each cel in rng.Column(5)
.Attachments.Add rng.Cells(cel.row?,5)
Can't get the row number of the visible cell to work. Once this is solved I can click the button and let the beast send out 1000+ emails. But at the moment cannot Was also thinking instead of For each cel, could use i = 1 to (last row in visible rng) ?
I have a need to sum only the visible cells in a row. Certain columns are collapsed depending on the month and there is a YTD colum that I only want to pick up the expanded or visible cells. I found a custom function listed below at Microsoft's website but it only allows for a single range to be entered and I need to pick 12 individual cells, for example A1, C1, E1, etc. There is other information in the cells between and that is why the range won't work. Is there a better way to do this or can this function be modified to allow me to do this?
Function Sum_Visible_Cells(Cells_To_Sum As Object)
Application.Volatile
For Each cell In Cells_To_Sum
If cell.Rows.Hidden = False Then
If cell.Columns.Hidden = False Then
total = total + cell.Value
End If
End If
Next
Sum_Visible_Cells = total
End Function
I have a data in which I have inserted a table with headers.
I then filter the type of data I want removed from the table using the drop down
Then goto special, visible cells only, press delete.
Now, the data is gone, but when I select all again to pull up the entire table, the data is gone, but rows are still there. So now I have tons of empty rows in between the rows of needed data. Any way of removing the rows in between as well as the data?
I have a spreadsheet that has many rows of data. I've filtered the spreadsheet, and want to paste a formula so that it appears only in the filtered rows. How can i do that?
View 1 Replies View RelatedI've setup a worksheet whereby rows can be Autofiltered between a start and finish date via a Userform which (after much mucking about with UK/US dates) seems to be working nicely now. With the results of the Autofilter, i wish to count certain entries (in this case entries that are in column F) in the remaining visible rows.
The Workbook is about 'Cases' worked, and column F relates to how the 'Case' is cleared (Call, Letter, Referral). Effectively I want to be able to count 'Call', 'Letter' and 'Referral' entries once the Autofilter has been applied.
I had a situation in which i need to number the cells which start with the Text "SB" in column B. To elaborate,i want to give a serial number for all the transactions starting with "SB". For this i filtered the data >> Custom>>Begins with>>"SB"(Quotes Ommitted). I want to increment the cells with the serial numbers 1,2,3 and so on only those which contain SB. I tried using it with the ROW Function.
View 5 Replies View RelatedI am looking for a COUNTIFS that is only looking only at the visible cells. I have found a few threads on this subject but none for this specific problem.I know there is a SUMPRODUCT / SUBTOTAL excel solution for COUNTIFSing visible cells only. How modify it to take multiple ranges and criteria like CONUTIFS does.
[Code].....
I've got an AUTOFILTER and would like to add only the visible cells in a particular column (column E). As the user changes the filter, the total would change - but I'm not sure where to even start with this one. I've attached a sample file.
View 2 Replies View RelatedI have a worksheet with 26 columns of financial data. ACTUAL and BUDGET for each month and year totals for ACTUAL and BUDGET. I've provided the user with the ability to hide months they don't need to see during their current session. For example, if they are working on May, they may choose to hide June through December.
A user has requested Year To Date totals for ACTUAL and BUDGET. I thought this would be relatively simple. Just add two more columns and add up the visible cells.
I got this function from the Microsoft website and it works if I don't add criteria:
I have a spreadsheet with a lot of hidden rows in.
How can I do a count that only counts information in the visible cells?
How do I modify this formula to calculate visible cells?
=AVERAGE(IF($U$8:$U$720="AM",$H$8:$H$720))
I've got a macro with copies certain data from 1 sheet to the next. The problem I have is that some times there is an autofillter on the data.
I think I need to add .SpecialCells(xlCellTypeVisible) in to the code some where but im not sure where.
my current code is as follows. This is only a part of the code. It also copies other columns across to the other sheet
Code:
Sub CopyPasteMacro()
'
With Sheets("Imprint Data")
LastRow = .Range("A" & .Rows.Count).End(xlUp).Row
Set rngToCopy = .Range(.Range("B6:B" & LastRow), .Range("B6:B" & LastRow))
End With
rngToCopy.Copy
Sheets("To Key @ TE Imprint").Range("D4").PasteSpecial Paste:=xlPasteValues
End Sub
I was using the following scripts to fill a listbox in a userform.
Code:
ListBox1.List = Sheets("Working").Range("A1:C20").Value
Now I have a filtered list and have tried to use the following but I can't get it to work.
I can use a more indepth script to get it to work but would rather use a one line script.
Code:
ListBox1.List = Sheets("working").Range("A1", Range("C" & Rows.Count).End(xlUp)).SpecialCells(xlCellTypeVisible)
How can we loop through visible cells only?
Actually I am using filter and I want to run a for loop on filtered data only. How can I do this?
I'm trying to use the count if function in VBA to get the number of cells in a range that have a "1" as their value.
The code I have is:
variable = Application.WorksheetFunction.CountIf(Range("Q5:Q" & FinalRow).SpecialCells(xlCellTypeVisible), "1")
And it's not working.
someone the VBA code which only selects visible cells in a sheet.
i.e. if for example, range("a1:d5") contained data BUT
range("a6:d100") contained formulae but NO data
the macro would only highlight range("a1:d5")
However, when say range("a6:d10") contained data, then the macro would highlight range("a1:d10")
and so on.
I want the mcro to do this without me having to manually change the ranges when running the macro.
How do I modify the following formula to work for visible cells only:
=IF(J2=J1,K1+1,1)
For your information the formula is filled through K2:K2122
I'm filtering some data and would like to copy the visible cells. When using the code below, it copies all but four rows...is there a row maximum limit it can copy?
Rows("31:31").Select
Selection.AutoFilter
Selection.AutoFilter Field:=14, Criteria1:="FALSE"
.Offset(1).SpecialCells(xlCellTypeVisible).EntireRow.Copy