Macro To Combine Multiple Sheets Into One
Jun 29, 2011
I have an excell spreadhseet that has more than 100 sheets and I would like to combine all these sheets into one master sheet (Sheet1 = MasterSheet) within this workbook. Each sheet has different number of rows used. I just want used ranges to be copied over to a master file appending the previous copied range.
Sub MergeSheets()
Dim strSheet As Object
Dim LR As Long, LC As Long
Sheets("Sheet1").Name = "MasterSheet"
LR = Cells.Find(What:="*", SearchDirection:=xlPrevious, SearchOrder:=xlByRows).Row
For Each strSheet In Sheets
If strSheet.Index 1 Then
[code]....
View 5 Replies
ADVERTISEMENT
Mar 16, 2008
I have about 20 workbooks with different file names for different projects all saved in the same folder. Each workbook has about 10 worksheets and each worksheet is named in a similar fashion in each of the 20 workbooks (eg. revenue, cost, variance etc.). I want to pull out a worksheet named ' forecast' from each workbook into a master workbook so that the master workbook would contain the 20 forecast worksheets.
View 9 Replies
View Related
Apr 15, 2007
I have a worksheet that has about a dozen sheets that are all the same, just different data. Each sheet is like a checkbook register that has date, memo, amount.... each sheet is for a different account. I have a form that I enter the info into, it puts it into the right sheet and sorts that sheet. This part all works.
But now, I want to take all the info from the different sheets and combine it into one master register sorted by date. I won't make changes to info in this master register, it would just be for info, so it doesn't have to work backwards. I need this to be automated.
Obviously, it's easy to copy all of them to different areas in one sheet, but I want to have them all in the same columns, and that is what I can't figure out. My sub registers don't have the account name listed for each entry, as it isn't necessary as the registers are labeled. But, the entries in the master register would have to have them to figure out where they came from. I can solve this by adding it to the sub accounts and hiding it or something if that is the easiest way. I also need to make sure it doesn't remove duplicates.
View 9 Replies
View Related
Aug 20, 2009
I have 6 spreadsheets all within the same folder, these are pretty much identical (rows, colums, sheets within them) apart from the names of the files.
I then have a master spreadsheet within the same folder where I want to combine all the data, from all the sheets within each book (if that makes sense!) apart from the data on the last sheet within each book as this is the reference data, onto one sheet within this master file. If possible I only want to copy rows accross which have complete data too.
So: (names not correct)
From book1.xls copy all data on sheets (sheet1, sheet2 etc) except last sheet
From book2.xls copy all data on sheets (sheet1, sheet2 etc) except last sheet
combine onto masterfile.xls on sheet1.
I have searched on here and can only find how to do it with the first sheet in each workbook, not looping through all the sheets in each book. Please see below.
View 9 Replies
View Related
Dec 16, 2009
I need to combine the category sheets back into one main table, knowing that there may well be an increase in the number of categories, as well as the number of rows in each category sheet.
I have attached a sample workbook - if anyone can help me with the code so that when the macro is run, the data in sheets A, B and C are combined into Main Table.
the macro would also then update the Pivot table, that would be the icing on the cake (I have shown the pivot table configuration I need, in this case using only the data from sheet 'C', for reference)
View 6 Replies
View Related
Dec 27, 2012
What I would like to do is combine all data (from sheet: Page1,Page2, and Page3) into one sheet named 'Consolidated'. Unfortunately, as you will see from the attached file, my programming and understanding of VBA programming is pretty naive.
What I am after is, when I combine the data, from all sheets into the one, the data should be
1. Automatically Sorted by Patient Name
2. Group, results of the same patient from all sheets one below the other in seperate rows
3. Delete any other rows that may have a patient name and ID, but rest of the rows (New Mole,Clinically Suspicious......Benign Naevus) are blank. (This happens because of the way I have designed my userform. For first visit the details are entered in Page 1, then for second Visit Details are entered in Page2, and for third visit in Page 3. So when I enter the first visit details, the Patient Name and Patient Number are copied into Page 2 and Page 3 even though the other details remain blank. I have done it this way because, if say the Patient comes for visit the second time, the clinician may or may not be aware which visit this would be for the patient. So as soon as they enter patient number, it will give them a message that Patient already exists. So when they click Open Existing Patient Record, the form autopopulates with any notes from their previous visit into the respective page (i.e Page 1,Page 2 or Page 3).
Page 1 (Page 2 and Page 3 are exactly the same)
Patient Name
Patient Number
New Mole
Clinically suspicious
Changed from mapping Photo
Level of Suspicion: Score
Monitor
[code].....
View 3 Replies
View Related
Sep 8, 2009
I am trying to do is to combine multiple sheets from multiple workbooks if in the created parameters table it has a 'y' next to it. (So you can specify which workbooks to copy from and which worksheets to copy from) - please see example file to get a better understanding.
Example file:
Master
What I have is a parameters table which defines which workbook/worksheet to look in (please see attachment) on the 'parameters' worksheet.
I also have a 'raw data' worksheet within the same workbook where I want the combined data to go.
File a.xls/b.xls/c.xls etc
Theses are the workbooks where all the data is held which I want to combine, each workbook is the same, just different 'data'. - they are all in the same path too.
In the first column in the parameters table I have the available workbooks:
a.xls
b.xls
c.xls
etc
and next to it a 'y' or 'n' - 'y' if I want to copy data from that workbook or a 'n' if I don’t.
In the second column in the parameters table I have the available worksheets:
sheet1
sheet2
sheet3
etc
and next to it a 'y' or 'n' - 'y' if I want to copy data from that worksheet or a 'n' if I don’t.
In the attached example I have code which loops through each file a,b,c dependent whether it has a y/n next to it but I need some code to get it to copy data from the specified sheets in the second column (if it has a Y next to it) in the parameters table to the raw data worksheet in the master workbook with the filename of where the data came from in column A (eg A.xls).
View 3 Replies
View Related
Sep 9, 2009
Combine to sheets in one sheets using macro ...
View 9 Replies
View Related
Apr 9, 2014
I am trying to combine several workbooks containing data in multiple sheets into a master workbook. All the workbooks have the same number of worksheets. I would like to combine all data in Sheet1 into a new Sheet1, all data from Sheet2 into a new Sheet2, etc.
View 1 Replies
View Related
Jun 2, 2014
Create a macro which will combine three different sheets with their names from 10 to 15 sheets.
View 1 Replies
View Related
May 6, 2014
I would like a macro to be able to save 26 tabs within the one document to individual PDFs.Preferably I would like to be able to specify each time exactly which tabs get printed, because often I don't need to print all 26, just the first 10 or so.I would like each PDF to automatically be named with the value in cell E10 of each tab.E10 already has a formula to create its final value. It references cells from other tabs within the same document. Hopefully the fact that this cell has a formula in it won't affect my ability to use the resulting value as a 'save as' reference?I would like it if the PDFs save to the same location as the Excel sheet from which they're generated is located. The location of the excel sheet will change every three months, so I'd prefer not to specify a location with a specific filepath, as it will have changed by the time I run the macro again.
I am using Excel 2010.
View 5 Replies
View Related
Sep 18, 2008
How to combine two worksheets (sheet 1 and sheet2) to a sheet named “combined”?
Sheet 1 and sheet 2 contain data wich is filled up by using formulas. The data range is from col A to F with headers in the first row, the length is variable.
Here’s an example:
Sheet1
ColA ColB ColC ColD ColE ColF
33 44 46 84 36 567
10 12 56 98 100 64
0 0 0 0 0 0
0 0 0 0 0 0
Sheet2
ColA ColB ColC ColD ColE ColF........
View 9 Replies
View Related
Apr 17, 2009
Hi i have this macro below which works perfectly to clear the contents of column A. I will have multiple worksheets all named from 1,2,3,4,5 upto 50.
What i would like to do is modify this script below so it will run on the worksheets labelled above.
View 7 Replies
View Related
Sep 8, 2012
I have a macro and I want to run that macro on multiple sheets. I don't know how to select multiple sheets. I have selected for example three worksheets.
I have used the following code but the code runs only on sheet 10. what do I need to do to make it work on all the sheets ?
Code:
Sub multiplemacro()
Dim wsh As Worksheet
Sheets(Array("Sheet10", "Sheet11", "Sheet12")).Select
[Code].....
View 3 Replies
View Related
May 22, 2009
I have a workbook with a Sheet named Main Data. The sheet named Main Data, I want to leave alone. The remaining 8 or 10 worksheets (the number of sheets can vary), I would like to take the range A2 to the last row in AH that has contents in it and paste those ranges from each worksheet into one new worksheet so that they do not overlap. I don’t know how to do that so the range I am using in the code below is A2:AH60000 consequently it will not copy the entire range from each worksheet because there are not enough rows in the destination sheet.
View 2 Replies
View Related
Jun 27, 2014
I have multiple sheets and a summary sheet in the beginning. and i need to populate the min value / max value and the avg value for every sheet into the summary sheet.
Example i have a column of numbers in column G and i need the min , max and round(avg) for all sheets in the first summary sheet.
View 2 Replies
View Related
Mar 21, 2014
I want to consolidate the various employees' salaries of all months in a sheet. I enter salaries in different sheets month-wise and in each sheet, department-wise. Some employees get commission in various departments. Now, I need to see the details of an employee by giving his name. I should get month-wise his salary, commission and department in which he get commission, across all the sheets.
View 1 Replies
View Related
Mar 13, 2008
Print sheet 1, 3 and 7. Always print sheet 1, however only print sheet 3 and 7 if there in these sheets are values in the cells from row 8 and below.
(If that is to complicated it would be ok if the condition for printing sheet 3 and 7 is that there's a value in e.g. cell A8.)
I managed to create this script that allows me to print sheets 1, 3 and 7, however I can't seem to find out where to put the if-statement (I suppose that's how you do it?). Here's the script i created so far:
View 9 Replies
View Related
Dec 30, 2012
I am writing a macro that organizes data, but also needs to be able to conditionally copy data from other sheets in a workbook.
I have a table with values...column A has the identifiers (strings of letters) and column N has comments related to the data in each row. So, for example, row 3 column A has the value "AAPL," and row 3 column N has the related value "sells electronic goods."
Now, I want to be able to copy column N based on the value of column A into other sheets using my macros. So, say I have another sheet in the workbook and row 6 column A has the value "AAPL," I want row 6 column N to have the related value from the previous sheet. Is it possible to do this?
View 2 Replies
View Related
Oct 18, 2013
I have a macro listed below that I would like to use on multiple sheets within the same workbook.
Sub PrintMacro1()
'
' PrintMacro1 Macro
' To change print format from landscape to protrait
[Code].....
View 4 Replies
View Related
Mar 10, 2014
What would be the macro if i need to hide multiple select sheets? I'm working on a test with 12 sheets. Even number sheets contains the fields that they need to answer and the Odd number sheets contains the formula for score computing including the answers so it needs to be like this:
Sheet 2 - The test
Sheet 3 - Must be hidden
Sheet 4 - The test
Sheet 5- Must be hidden
Sheet 6- The test
Sheet 7 - Must be hidden
I already have the code to unhide all sheets, just need the macro to hide specific sheets like the ones above.
View 2 Replies
View Related
Dec 30, 2006
I am creating a vacation calendar for all of my associates. I have 763 employees so, i want to run a macro that will react a worksheet for each of them. I will have an employee list that will create the sheets and I will have a VLOOK Up to update and pull information when we have new hires come on board.
View 9 Replies
View Related
Jun 13, 2007
I have to run the macro in over 75 sheets every month and they are divided in few workbooks. The workbooks have 2 summary sheets and then the sheets I need to run the macro. Can you help me to run the macro in all of these workbooks running it just once?
Sub TelcoTicketsCleaning()
'
' TelcoTicketsCleaning Macro
' Macro recorded 6/13/2007 by EQUANT
'
Dim lastrow As Long
lastrow = Cells.Find(What:="*", After:=[A1], SearchOrder:=xlByRows, SearchDirection:=xlPrevious).Row
For r = lastrow To 46 Step -1 'Remove rows with DSL, ISDN and PSTN services..................
View 9 Replies
View Related
Aug 10, 2009
I am trying to run the following code on multile sheets in a workbook. so far this code is working fine for one worksheet. Can someone help me modify this so it runs on multiple sheets. There can be more then 1 worksheet in a workbook depending upon data ...
View 9 Replies
View Related
Jun 30, 2006
I would like to run the code below on selected sheets in my workbook:
Range("B9:AW38, AZ9:BE38, b3").ClearContents
I tried using this but it doesn't work:
Sub clear()
Sheets( Array("sheet A", "sheet B", "sheet C")).Select
Range("B9:AW38, AZ9:BE38, b3").ClearContents
End Sub
View 2 Replies
View Related
Dec 8, 2013
I have 3 sheets in my workbook, DataA, DataB, and DataC
Data A contains:
ID_customer
and 4 variables A-D
DataB contains
ID_Customer
and 4 different variable W,X,Y,Z
Data C contains
ID_customer
and other 4 different variables
Request: I need to analyses the relationship between the variables using a Pivot table.
My thoughts so far: I think that I need to combine all the information onto one sheet first and then use the pivot table function, but its currently unable to combine onto one sheet, due to Id_ customer numbers appearing several times in DataB and DataC (and not always the same number of times in both), I need to retain all the information from DataB and DataC
I have attached a sample of my data : DataA.xlsx
View 6 Replies
View Related
Jan 30, 2014
I have three spreadsheets. They all contain different data but each one has a 'Rental Equip ID' column. Is there a way to take these three spreadsheets and consolidate in to one spreadsheet with all the data on one sheet? I have included an example of each sheet. The column headers are in bold. I can send an example file examples if needed.
Rental Dscr
Rental Equip ID
Rental Group
Rental Sub Group
Rental Qty
Rental Cost
BALL JOINT ADAPTERS 4WD
004-0302
13
2834
1
$ 50.22
[Code] ......
View 7 Replies
View Related
May 23, 2013
i have a macro code but i don't know how to apply it to all sheets in the same workbook
my code is
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Range("D5:D100"), Target) Is Nothing Then
Target.Offset(0, 1).Value = Now() [code]....
View 1 Replies
View Related
Jul 12, 2013
I have a spreadsheet with over a hundred tabs, each of which need to be password protected (same password).
I found code on CFO.com that got me half way there. It protects all the spreadsheets, but it does not password protect the macro itself, meaning that anybody can step into the macro and unlock everything at the click of a button.
The code looks like this.
VB:
Sub ProtectAllSheets()
For Each ws In ActiveWorkbook.Worksheets
ws.Protect Password:="secret123"
Next ws
MsgBox "All Worksheets Protected"
[Code] ....
What can I do to prevent people from stepping into the macro, or prompt a password to actually use the macro itself?
View 1 Replies
View Related
Jan 31, 2014
Sorting.xlsx
I am trying to figure out how to make a macro that can sort some numbers from Largest to Smallest within a specific range on multiple sheets. The range is only within column D starting with cell D11: (until the data ends) on all the sheets in my workbook (the number of sheets may change with time) except for Sheets: "A", "B" and "C".
In other words I want the sort to work on all sheets except the first 3 sheets which are named Sheet A, Sheet B, and Sheet C.
I have attached a spreadsheet for an example of what I am saying.
View 5 Replies
View Related
