How to combine two worksheets (sheet 1 and sheet2) to a sheet named “combined”?
Sheet 1 and sheet 2 contain data wich is filled up by using formulas. The data range is from col A to F with headers in the first row, the length is variable.
Here’s an example:
Sheet1
ColA ColB ColC ColD ColE ColF
33 44 46 84 36 567
10 12 56 98 100 64
0 0 0 0 0 0
0 0 0 0 0 0
Sheet2
ColA ColB ColC ColD ColE ColF........
Create a macro which will combine three different sheets with their names from 10 to 15 sheets.
View 1 Replies View RelatedCombine to sheets in one sheets using macro ...
View 9 Replies View RelatedI have a workbook with a Sheet named Main Data. The sheet named Main Data, I want to leave alone. The remaining 8 or 10 worksheets (the number of sheets can vary), I would like to take the range A2 to the last row in AH that has contents in it and paste those ranges from each worksheet into one new worksheet so that they do not overlap. I don’t know how to do that so the range I am using in the code below is A2:AH60000 consequently it will not copy the entire range from each worksheet because there are not enough rows in the destination sheet.
View 2 Replies View RelatedI have a worksheet that has about a dozen sheets that are all the same, just different data. Each sheet is like a checkbook register that has date, memo, amount.... each sheet is for a different account. I have a form that I enter the info into, it puts it into the right sheet and sorts that sheet. This part all works.
But now, I want to take all the info from the different sheets and combine it into one master register sorted by date. I won't make changes to info in this master register, it would just be for info, so it doesn't have to work backwards. I need this to be automated.
Obviously, it's easy to copy all of them to different areas in one sheet, but I want to have them all in the same columns, and that is what I can't figure out. My sub registers don't have the account name listed for each entry, as it isn't necessary as the registers are labeled. But, the entries in the master register would have to have them to figure out where they came from. I can solve this by adding it to the sub accounts and hiding it or something if that is the easiest way. I also need to make sure it doesn't remove duplicates.
I have 3 sheets in my workbook, DataA, DataB, and DataC
Data A contains:
ID_customer
and 4 variables A-D
DataB contains
ID_Customer
and 4 different variable W,X,Y,Z
Data C contains
ID_customer
and other 4 different variables
Request: I need to analyses the relationship between the variables using a Pivot table.
My thoughts so far: I think that I need to combine all the information onto one sheet first and then use the pivot table function, but its currently unable to combine onto one sheet, due to Id_ customer numbers appearing several times in DataB and DataC (and not always the same number of times in both), I need to retain all the information from DataB and DataC
I have attached a sample of my data : DataA.xlsx
I have an excell spreadhseet that has more than 100 sheets and I would like to combine all these sheets into one master sheet (Sheet1 = MasterSheet) within this workbook. Each sheet has different number of rows used. I just want used ranges to be copied over to a master file appending the previous copied range.
Sub MergeSheets()
Dim strSheet As Object
Dim LR As Long, LC As Long
Sheets("Sheet1").Name = "MasterSheet"
LR = Cells.Find(What:="*", SearchDirection:=xlPrevious, SearchOrder:=xlByRows).Row
For Each strSheet In Sheets
If strSheet.Index 1 Then
[code]....
I have three spreadsheets. They all contain different data but each one has a 'Rental Equip ID' column. Is there a way to take these three spreadsheets and consolidate in to one spreadsheet with all the data on one sheet? I have included an example of each sheet. The column headers are in bold. I can send an example file examples if needed.
Rental Dscr
Rental Equip ID
Rental Group
Rental Sub Group
Rental Qty
Rental Cost
BALL JOINT ADAPTERS 4WD
004-0302
13
2834
1
$ 50.22
[Code] ......
Here is basically the problem, I have 2 sheets and want to copy/ paste them like this:
Sheet 1
Name of a product
Data 1
Data 2
Data 3
[Code]....
Can this be done in Excell 2007?
I need to combine the category sheets back into one main table, knowing that there may well be an increase in the number of categories, as well as the number of rows in each category sheet.
I have attached a sample workbook - if anyone can help me with the code so that when the macro is run, the data in sheets A, B and C are combined into Main Table.
the macro would also then update the Pivot table, that would be the icing on the cake (I have shown the pivot table configuration I need, in this case using only the data from sheet 'C', for reference)
What I would like to do is combine all data (from sheet: Page1,Page2, and Page3) into one sheet named 'Consolidated'. Unfortunately, as you will see from the attached file, my programming and understanding of VBA programming is pretty naive.
What I am after is, when I combine the data, from all sheets into the one, the data should be
1. Automatically Sorted by Patient Name
2. Group, results of the same patient from all sheets one below the other in seperate rows
3. Delete any other rows that may have a patient name and ID, but rest of the rows (New Mole,Clinically Suspicious......Benign Naevus) are blank. (This happens because of the way I have designed my userform. For first visit the details are entered in Page 1, then for second Visit Details are entered in Page2, and for third visit in Page 3. So when I enter the first visit details, the Patient Name and Patient Number are copied into Page 2 and Page 3 even though the other details remain blank. I have done it this way because, if say the Patient comes for visit the second time, the clinician may or may not be aware which visit this would be for the patient. So as soon as they enter patient number, it will give them a message that Patient already exists. So when they click Open Existing Patient Record, the form autopopulates with any notes from their previous visit into the respective page (i.e Page 1,Page 2 or Page 3).
Page 1 (Page 2 and Page 3 are exactly the same)
Patient Name
Patient Number
New Mole
Clinically suspicious
Changed from mapping Photo
Level of Suspicion: Score
Monitor
[code].....
I have 2 sheets with a list of account numbers and values on each (Column A = AccountNumber, Column B = Amount)
I want to combine this on Sheet3 which should include all accounts on the other 2 sheets. Some AccountNumbers only exist on on one of the sheets.
Sheet1
A..100
C..200
E..400
Sheet2
A..200
B..100
D..200
Sheet3
A..100..200
B.....0..100
C..200..0
D.....0..200
E..400..0
I am trying to do is to combine multiple sheets from multiple workbooks if in the created parameters table it has a 'y' next to it. (So you can specify which workbooks to copy from and which worksheets to copy from) - please see example file to get a better understanding.
Example file:
Master
What I have is a parameters table which defines which workbook/worksheet to look in (please see attachment) on the 'parameters' worksheet.
I also have a 'raw data' worksheet within the same workbook where I want the combined data to go.
File a.xls/b.xls/c.xls etc
Theses are the workbooks where all the data is held which I want to combine, each workbook is the same, just different 'data'. - they are all in the same path too.
In the first column in the parameters table I have the available workbooks:
a.xls
b.xls
c.xls
etc
and next to it a 'y' or 'n' - 'y' if I want to copy data from that workbook or a 'n' if I don’t.
In the second column in the parameters table I have the available worksheets:
sheet1
sheet2
sheet3
etc
and next to it a 'y' or 'n' - 'y' if I want to copy data from that worksheet or a 'n' if I don’t.
In the attached example I have code which loops through each file a,b,c dependent whether it has a y/n next to it but I need some code to get it to copy data from the specified sheets in the second column (if it has a Y next to it) in the parameters table to the raw data worksheet in the master workbook with the filename of where the data came from in column A (eg A.xls).
I have data in two sheets. None of the sheets the rows and columns are fixed.
I want to copy the data from the two sheets and paste it in the third sheet. I have attached a sample sheet for reference. I need to set it in page width so that I can print that.
I work for schools use data to guide teachers practices in the classroom. My main function is to mine down through data for kids that teachers focus on specific skills with specific children.
I start with a big conference each summer. By hand I combine, by student name, the data collected over the past school year. We then tear down to student levels setting goals based on statistical analysis. I need to combine across all of these csv files in a way that appends the data from each into one line per kid. I thought that 'vlookup' or 'index, match' might do it. I don't know.
For Each Ws In Sheets(Array("SHEET101", "SHEET102", "SHEET103", "SHEET104", "SHEET105", "SHEET106", "SHEET107", "SHEET108"))
With Ws
Finalrow = .Range("A65536").End(xlUp).Row
Set CpyRng = .Range("A2", .Cells(Finalrow, "AR"))
If Finalrow > 1 Then
CpyRng.Copy Sheets("Master").Cells(Rows.Count, "A").End(xlUp)(2)
End If
End With
Next Ws
Basically what it does is simply combine all the records in the the mentioned sheets to the master sheet.
There is a little problem. When one of the sheets are on a filtered mode, the data copied in the "Master" sheet are only visible cells.
Un-filtering before copying is an option (i.e. putting the code ".ShowAllData") IF I can put the exact filtering back after copying. Reason being that the sheets are owned by other parties and they do not want their own filtering be removed.
I am trying to combine several workbooks containing data in multiple sheets into a master workbook. All the workbooks have the same number of worksheets. I would like to combine all data in Sheet1 into a new Sheet1, all data from Sheet2 into a new Sheet2, etc.
View 1 Replies View RelatedI have about 20 workbooks with different file names for different projects all saved in the same folder. Each workbook has about 10 worksheets and each worksheet is named in a similar fashion in each of the 20 workbooks (eg. revenue, cost, variance etc.). I want to pull out a worksheet named ' forecast' from each workbook into a master workbook so that the master workbook would contain the 20 forecast worksheets.
View 9 Replies View RelatedI have 6 spreadsheets all within the same folder, these are pretty much identical (rows, colums, sheets within them) apart from the names of the files.
I then have a master spreadsheet within the same folder where I want to combine all the data, from all the sheets within each book (if that makes sense!) apart from the data on the last sheet within each book as this is the reference data, onto one sheet within this master file. If possible I only want to copy rows accross which have complete data too.
So: (names not correct)
From book1.xls copy all data on sheets (sheet1, sheet2 etc) except last sheet
From book2.xls copy all data on sheets (sheet1, sheet2 etc) except last sheet
combine onto masterfile.xls on sheet1.
I have searched on here and can only find how to do it with the first sheet in each workbook, not looping through all the sheets in each book. Please see below.
I would like to use VBA to search a folder and copy data from tabs within the excel files there. The data will be pasted to a tab of same name in the the main file. All the files are in the same format.
So far I have only managed to list the files in the folder using code I found on your site!
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
I have been running a simulation for about 18 hours now and just received:
Run-time error '1004':
Method 'Add' of object ' Sheets' failed
I have been creating new sheets, importing data, pulling some values from the data then deleting the respective sheet. I am using:
ActiveWorkbook.Sheets.Add after:=Sheets(Sheets.Count)
The sheet is actually being added to the workbook, seemingly before the error. I resume the code, and a new sheet is placed in the workbook and it errors again. The Debugger stops and highlights on the code above.The sheet count number was 10895 at the error, just as an indicator of how many times the simulation has performed successfully. I am hoping this is something I can fix without having to start over...
[URL] ....
I want to sort the Inventory Checklist sheet based on Column D but it gives me nothing but references errors.
i have a workbook that has the following sheets
working sheet
job sheet
receipt of deposit letter
completion sheet
delivery note
delivery note (2)
odd
even
t&t
glass
ggf
i want to hide every sheet except the working sheet.
I have tried this but the macros bring up an error when i run the macro
my macros involve printing certain pages dependng on what button is pressed
i get an error whatever
how do i stop this
I have 25 sheets in the workbook and a combobox on the main page, The combobox references a range of 1-25 that represents the 25 hidden pages. right now i can get the sheets to unhide one at a time based on the selection e.g. combobox option 1 will unhide sheet 1 but the sheet are representing sites in a design so i need to have the option to select multiple sites in the combobox option so for example if i select 5 then sheets 1-5 should unhide. I hope I've explained that clearly.
The other question or option would be to just duplicate sheet 1 based on the combobox selection e.g. selection 5 duplicates sheet 1 5 times.
I have received following macro from someone to delete series but the problem is that it gives error when some sheets are protected, and I want those sheets to protected. When run it will ignore/leave protected sheets but delete series only from unprotected sheets
Private Sub CommandButton1_Click()
Dim Rng As Range, i As Long, r As Range, lVal, uVal
Dim DeleteCount As Double
Dim lRow As Long
Dim dr As Long
Dim dc As Long
dc = Sheets("Deleted Numbers").UsedRange.Columns.Count - 1
dr = Cells(Rows.Count, Sheets("Deleted Numbers").UsedRange.Columns.Count - 1).End(xlUp).Row + 1
If dr = 60001 Then ................
I need to do VBA coding. Got 12 Sheets for 12 month of Sales. Every Sheets are in same Header Format.
For Column R (Status), there's Filter Data "TRUE" and "FALSE". I have to move/copy "TRUE" item into Sheet Aging 2014.
I manage to transfer using only one Sheets using Advanced Filter VBA, failed with other Sheet.
I attached the file : Sales 2014.xlsx‎
on sheet1 I have a button I need to do the following when clicked:
(1) name the next 30 sheets based on cell values in sheet1
(2) for those 30 sheets, hide some of them based on a y/n input in sheet 1
To clarify: the worksheets do not need to be created, they already exist. They just need to be renamed and hidden based on that y/n criteria. see attachment with just 1 worksheet for clarification. So - The next 30 sheets are to be named by the following ranges (B7:B16), (B21:B30) and (B35:B44). For every product with a "n" in column C of sheet1, the worksheet for that product needs to be hidden.
I have merged 336 individual spreadsheets into one book, now I want to merge the data in all the sheets into 1 individual sheet. All the sheets have the same size and range, I need to copy a constant range(row,column) from all the different sheets into one.
What VBA functions to use???
I have a work sheet named "Main_List"...In column D starting with "D2" I would like to list worksheets that I would like to have printed via VBA.
The workbook has several hundred worksheets and I would like to list in column D only worksheets that I would like to print with VBA code.
