Combine Sheets To One Worksheet
May 22, 2009
I have a workbook with a Sheet named Main Data. The sheet named Main Data, I want to leave alone. The remaining 8 or 10 worksheets (the number of sheets can vary), I would like to take the range A2 to the last row in AH that has contents in it and paste those ranges from each worksheet into one new worksheet so that they do not overlap. I don’t know how to do that so the range I am using in the code below is A2:AH60000 consequently it will not copy the entire range from each worksheet because there are not enough rows in the destination sheet.
View 2 Replies
ADVERTISEMENT
Jun 2, 2014
Create a macro which will combine three different sheets with their names from 10 to 15 sheets.
View 1 Replies
View Related
Sep 9, 2009
Combine to sheets in one sheets using macro ...
View 9 Replies
View Related
Sep 18, 2008
How to combine two worksheets (sheet 1 and sheet2) to a sheet named “combined”?
Sheet 1 and sheet 2 contain data wich is filled up by using formulas. The data range is from col A to F with headers in the first row, the length is variable.
Here’s an example:
Sheet1
ColA ColB ColC ColD ColE ColF
33 44 46 84 36 567
10 12 56 98 100 64
0 0 0 0 0 0
0 0 0 0 0 0
Sheet2
ColA ColB ColC ColD ColE ColF........
View 9 Replies
View Related
Apr 15, 2007
I have a worksheet that has about a dozen sheets that are all the same, just different data. Each sheet is like a checkbook register that has date, memo, amount.... each sheet is for a different account. I have a form that I enter the info into, it puts it into the right sheet and sorts that sheet. This part all works.
But now, I want to take all the info from the different sheets and combine it into one master register sorted by date. I won't make changes to info in this master register, it would just be for info, so it doesn't have to work backwards. I need this to be automated.
Obviously, it's easy to copy all of them to different areas in one sheet, but I want to have them all in the same columns, and that is what I can't figure out. My sub registers don't have the account name listed for each entry, as it isn't necessary as the registers are labeled. But, the entries in the master register would have to have them to figure out where they came from. I can solve this by adding it to the sub accounts and hiding it or something if that is the easiest way. I also need to make sure it doesn't remove duplicates.
View 9 Replies
View Related
Dec 8, 2013
I have 3 sheets in my workbook, DataA, DataB, and DataC
Data A contains:
ID_customer
and 4 variables A-D
DataB contains
ID_Customer
and 4 different variable W,X,Y,Z
Data C contains
ID_customer
and other 4 different variables
Request: I need to analyses the relationship between the variables using a Pivot table.
My thoughts so far: I think that I need to combine all the information onto one sheet first and then use the pivot table function, but its currently unable to combine onto one sheet, due to Id_ customer numbers appearing several times in DataB and DataC (and not always the same number of times in both), I need to retain all the information from DataB and DataC
I have attached a sample of my data : DataA.xlsx
View 6 Replies
View Related
Jun 29, 2011
I have an excell spreadhseet that has more than 100 sheets and I would like to combine all these sheets into one master sheet (Sheet1 = MasterSheet) within this workbook. Each sheet has different number of rows used. I just want used ranges to be copied over to a master file appending the previous copied range.
Sub MergeSheets()
Dim strSheet As Object
Dim LR As Long, LC As Long
Sheets("Sheet1").Name = "MasterSheet"
LR = Cells.Find(What:="*", SearchDirection:=xlPrevious, SearchOrder:=xlByRows).Row
For Each strSheet In Sheets
If strSheet.Index 1 Then
[code]....
View 5 Replies
View Related
Jan 30, 2014
I have three spreadsheets. They all contain different data but each one has a 'Rental Equip ID' column. Is there a way to take these three spreadsheets and consolidate in to one spreadsheet with all the data on one sheet? I have included an example of each sheet. The column headers are in bold. I can send an example file examples if needed.
Rental Dscr
Rental Equip ID
Rental Group
Rental Sub Group
Rental Qty
Rental Cost
BALL JOINT ADAPTERS 4WD
004-0302
13
2834
1
$ 50.22
[Code] ......
View 7 Replies
View Related
Jun 13, 2013
Here is basically the problem, I have 2 sheets and want to copy/ paste them like this:
Sheet 1
Name of a product
Data 1
Data 2
Data 3
[Code]....
Can this be done in Excell 2007?
View 5 Replies
View Related
Dec 16, 2009
I need to combine the category sheets back into one main table, knowing that there may well be an increase in the number of categories, as well as the number of rows in each category sheet.
I have attached a sample workbook - if anyone can help me with the code so that when the macro is run, the data in sheets A, B and C are combined into Main Table.
the macro would also then update the Pivot table, that would be the icing on the cake (I have shown the pivot table configuration I need, in this case using only the data from sheet 'C', for reference)
View 6 Replies
View Related
Dec 27, 2012
What I would like to do is combine all data (from sheet: Page1,Page2, and Page3) into one sheet named 'Consolidated'. Unfortunately, as you will see from the attached file, my programming and understanding of VBA programming is pretty naive.
What I am after is, when I combine the data, from all sheets into the one, the data should be
1. Automatically Sorted by Patient Name
2. Group, results of the same patient from all sheets one below the other in seperate rows
3. Delete any other rows that may have a patient name and ID, but rest of the rows (New Mole,Clinically Suspicious......Benign Naevus) are blank. (This happens because of the way I have designed my userform. For first visit the details are entered in Page 1, then for second Visit Details are entered in Page2, and for third visit in Page 3. So when I enter the first visit details, the Patient Name and Patient Number are copied into Page 2 and Page 3 even though the other details remain blank. I have done it this way because, if say the Patient comes for visit the second time, the clinician may or may not be aware which visit this would be for the patient. So as soon as they enter patient number, it will give them a message that Patient already exists. So when they click Open Existing Patient Record, the form autopopulates with any notes from their previous visit into the respective page (i.e Page 1,Page 2 or Page 3).
Page 1 (Page 2 and Page 3 are exactly the same)
Patient Name
Patient Number
New Mole
Clinically suspicious
Changed from mapping Photo
Level of Suspicion: Score
Monitor
[code].....
View 3 Replies
View Related
Jun 6, 2014
I have 2 sheets with a list of account numbers and values on each (Column A = AccountNumber, Column B = Amount)
I want to combine this on Sheet3 which should include all accounts on the other 2 sheets. Some AccountNumbers only exist on on one of the sheets.
Sheet1
A..100
C..200
E..400
Sheet2
A..200
B..100
D..200
Sheet3
A..100..200
B.....0..100
C..200..0
D.....0..200
E..400..0
View 9 Replies
View Related
Sep 8, 2009
I am trying to do is to combine multiple sheets from multiple workbooks if in the created parameters table it has a 'y' next to it. (So you can specify which workbooks to copy from and which worksheets to copy from) - please see example file to get a better understanding.
Example file:
Master
What I have is a parameters table which defines which workbook/worksheet to look in (please see attachment) on the 'parameters' worksheet.
I also have a 'raw data' worksheet within the same workbook where I want the combined data to go.
File a.xls/b.xls/c.xls etc
Theses are the workbooks where all the data is held which I want to combine, each workbook is the same, just different 'data'. - they are all in the same path too.
In the first column in the parameters table I have the available workbooks:
a.xls
b.xls
c.xls
etc
and next to it a 'y' or 'n' - 'y' if I want to copy data from that workbook or a 'n' if I don’t.
In the second column in the parameters table I have the available worksheets:
sheet1
sheet2
sheet3
etc
and next to it a 'y' or 'n' - 'y' if I want to copy data from that worksheet or a 'n' if I don’t.
In the attached example I have code which loops through each file a,b,c dependent whether it has a y/n next to it but I need some code to get it to copy data from the specified sheets in the second column (if it has a Y next to it) in the parameters table to the raw data worksheet in the master workbook with the filename of where the data came from in column A (eg A.xls).
View 3 Replies
View Related
May 4, 2007
I have data in two sheets. None of the sheets the rows and columns are fixed.
I want to copy the data from the two sheets and paste it in the third sheet. I have attached a sample sheet for reference. I need to set it in page width so that I can print that.
View 3 Replies
View Related
Dec 16, 2008
I'm having trouble with a copy of data in one worksheet and a paste of the data into another worksheet. The problem is determining the last row of data and where to start the paste.
What I have is three worksheets. Worksheet 1 contains column headings in row one. Worksheet 2 contains 30 columns and a varing number of rows of data. Worksheet 3 contains 30 columns and a varing number of rows of data.
I want to end up with all the rows of column a in worksheet 2 copied and pasted to column a of worksheet 1. Then I want to copy all the rows of column a from worksheet 3 and paste the rows to worksheet 1, but starting where the data from worksheet 2 ends.
sample data
sheet 1 sheet 2 sheet 3
01/01/08 01/02/08
01/03/08 01/04/08
Results
sheet 1 sheet 2 sheet 3
01/01/08 01/01/08 01/02/08
01/03/08 01/03/08 01/04/08
01/02/08
01/04/08...............................
View 7 Replies
View Related
Jun 27, 2013
I work for schools use data to guide teachers practices in the classroom. My main function is to mine down through data for kids that teachers focus on specific skills with specific children.
I start with a big conference each summer. By hand I combine, by student name, the data collected over the past school year. We then tear down to student levels setting goals based on statistical analysis. I need to combine across all of these csv files in a way that appends the data from each into one line per kid. I thought that 'vlookup' or 'index, match' might do it. I don't know.
View 14 Replies
View Related
Apr 16, 2007
For Each Ws In Sheets(Array("SHEET101", "SHEET102", "SHEET103", "SHEET104", "SHEET105", "SHEET106", "SHEET107", "SHEET108"))
With Ws
Finalrow = .Range("A65536").End(xlUp).Row
Set CpyRng = .Range("A2", .Cells(Finalrow, "AR"))
If Finalrow > 1 Then
CpyRng.Copy Sheets("Master").Cells(Rows.Count, "A").End(xlUp)(2)
End If
End With
Next Ws
Basically what it does is simply combine all the records in the the mentioned sheets to the master sheet.
There is a little problem. When one of the sheets are on a filtered mode, the data copied in the "Master" sheet are only visible cells.
Un-filtering before copying is an option (i.e. putting the code ".ShowAllData") IF I can put the exact filtering back after copying. Reason being that the sheets are owned by other parties and they do not want their own filtering be removed.
View 9 Replies
View Related
May 1, 2013
combine two excel worksheet into one new worksheet. thing is on both of these worksheet doesnt have a unique identifier. Is that possible & how.
View 2 Replies
View Related
Apr 9, 2014
I am trying to combine several workbooks containing data in multiple sheets into a master workbook. All the workbooks have the same number of worksheets. I would like to combine all data in Sheet1 into a new Sheet1, all data from Sheet2 into a new Sheet2, etc.
View 1 Replies
View Related
Jun 28, 2008
I want to combine data from several worksheets into one worksheet.
For example, I have data in Sheet1 (Columns A,B,C), data in Sheet2 (Columns A,B,C), data in Sheet3 (Columns A,B,C) all with varying amounts of rows. (All the rows contain text data).
I need to combine all of the data from the 3 sheets into a single sheet, Sheet4 (Columns A,B,C), eliminating the empty rows.
I've been looking into this for a while, and can't find anything that really helps. Anyone got any pointers of what to look into?
View 9 Replies
View Related
Oct 5, 2009
I would like to combine the data (in table format) on 900 different worksheets in one workbook (file) below each other, on one worksheet.
The data are in colombs B,C,D,E & F on all of the 900 different worksheets. The number of rows differs on each of the 900 different worksheets.
View 14 Replies
View Related
May 8, 2013
I have a set of excel files that I need to combine into one worksheet. The files have the same number of rows but the number of column will vary. The combined worksheet needs to have the data from each workbook appended to the last column.
Example:
FileA.xlsx
A
B
C
D
1
Question 1
1
10
20
2
Question 2
30
40
50
[Code] ........
View 5 Replies
View Related
Dec 13, 2007
I have about 100 worksheets that I need to combine the data from column A into 1 worksheet and place the name of the worksheet the data is coming from in column B of the combined worksheet. example
worksheet 1 named New York contains the following in column A
11518
11563
11572
Worksheet 2 named California contains the following in column A
93510
90247..............
View 3 Replies
View Related
Jun 10, 2008
I am trying to combine the data of 31 columns into one column on a separate worksheet. The number of pieces of data in each column is different and as a result I am hung up on how to code the macro so that it automatically moves to copying the next column when a blank cell is reached, as it currently copies until it reaches the 100th row and then moves to the next column even though they're blank.
Sub CopyColumns()
Dim improw As Long, impcolumn As Long, MyCell
Dim ws1 As Worksheet, ws2 As Worksheet
Dim improw2 As Long, impcolumn2 As Long
Application. ScreenUpdating = False
Set ws1 = ThisWorkbook.Sheets("Data")
Set ws2 = ThisWorkbook.Sheets("Details")
'paste location on ws2
improw2 = 2
impcolumn2 = 2
There are column headers for the data on ws1 in row 2. The other thing I would like to do if possible is copy these column headers from ws1 onto ws2 by pasting them to the left of each piece of data (impcolumn2 - 1).
View 4 Replies
View Related
Aug 13, 2009
I have four worksheets that all contain the same header row in row 1, but different data in the data rows. I would like to combine all the data from each of the 4 worksheets into a new (created by code) worksheet named "WS Combine". The worksheet named "Result I want 01" simulates exactly what I want the "WS Combine" worksheet to look like. Can this be done?
The header row, however, only needs to be brought over once (with all formatting intact; ie header pane frozen, yellow, centered & bold).
The Worksheet named "Result I want 02" simulates the second thing I would like to do. This worksheet basically looks at "Result I want 01" and copies ONLY the rows that are RED and BOLD and pastes these rows (along with the header row). This worksheet could be named "Red Totals"
A couple of nuances...
1. The rows that are RED and BOLD in the four original worksheets are not always in the same position. That's because they don't currently populate that way so I wanted to make this as real as possible. Therefore, ideally, code that says "just copy all data from four worksheets" would not be sufficient.
If it's not possible or too involved to have the worksheet named "Result I want 01" reorder the rows this way when copying them over, then having them in any order is fine.
2. I need to keep the font formatting of ALL the rows intact as future code will not work without this formatting retained on the two new worksheets.
3. It is possible that duplicate rows can be created (two worksheets have the same exact data) when combining these four worksheets into one. If this is the case, then either allow that to happen or simply delete the duplicate row, whichever is easier.
View 11 Replies
View Related
Oct 1, 2013
combine two Worksheet Change event macros into the one macro? The macros are listed below.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)On Error GoTo exitHandler
Dim rngDV As Range
Dim lRow As Long
Dim lCol As Long
[Code]...
exitHandler:
Application.EnableEvents = True
End Sub
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("O:O")) Is Nothing Then
Application.EnableEvents = False
[Code]...
View 7 Replies
View Related
Feb 15, 2013
I wanted to see if it were possible to combine multiple worksheets into one new worksheet, but without duplicating columns with the same heading, enabling the data to fall into the correct column if it's shared in multiple worksheets, and adding columns if their unique. Furthermore, if there are a few "leading" columns, i.e. ones that are shared in every sheet and never move from where they are, to include those as the leading columns in the new sheet. I'm unable to post an attachment, but I'll try to paint a picture. This is on a much smaller scale than intended, but I want to combine Sheet 1 and Sheet 2 to form Sheet 3 (which I've manually copied to look how I would want it to look if the formula/code works properly). Columns A, B, and C are the "leading" columns I was referencing, whereas any of the following columns may or may not be shared in the various worksheets, but should still be included and combined if they're the same. There also might be a different number of columns depending on the sheet. I consider myself somewhat of an intermediate user, and I am familiar with using VBA codes for formulas should that be the proper remedy.
View 2 Replies
View Related
Apr 12, 2007
I've pieced together code from a number of solutions on the forum and figured out how to find the files I need to process, but can't seem to figure out the code to actually combine/append each worksheet into a single one. I've searched the "sea of options" on this forum and managed to do one thing well. Pardon all my notes embedded in the code below, but if I don't do it that way, I'll only confuse myself further (which is easily accomplished) ... or lose my notes!
I’m going to run this code from an add-in menu, which is already created and working (yeaah!) … so (I think) I need to have the code either create a file named "Master (Combined).xls" in the target folder ... or ... have a file already created in MYFOLDER and have this code delete all but the header row when the file is opened(???) The "Master (Combined).xls" workbook needs to consist of one worksheet named "Master". I want it to open the current workbook (.foundfiles(i)), select all the data, and append it to the master workbook on the "Master" worksheet (sheet 1). The Master Worksheet in the Master Workbook needs to start out as a blank sheet ... except for the header row. I can add code to put the headers in at the start, if necessary
Sub g_CombineMultWB_AllXLSFiles()
' This Will combine all XLS files located in the
' S:DMSMSPOMSMaster POMS NIIN DataMaster EMALL Data FilesEMALL Excel Folder
' into a single worksheet in a newly created (or previously existing) workbook
'
' LOCATION OF FILES (ACTUAL):
' S:DMSMSPOMSMaster POMS NIIN DataMaster EMALL Data FilesEMALL Excel Folder
Dim i As Integer
Dim wbResults As Workbook
Dim wbCodeBook As Workbook
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False
' Application.CutCopyMode = False ' DO I HAVE THIS HERE FOR A REASON???
On Error Resume Next
Set wbCodeBook = ThisWorkbook
Const MYFOLDER = "S:DMSMSPOMSMaster POMS NIIN DataMaster EMALL Data FilesEMALL Excel Folder"
With Application.FileSearch
.NewSearch
' Change path To suit.............................
View 9 Replies
View Related
Mar 16, 2008
I have about 20 workbooks with different file names for different projects all saved in the same folder. Each workbook has about 10 worksheets and each worksheet is named in a similar fashion in each of the 20 workbooks (eg. revenue, cost, variance etc.). I want to pull out a worksheet named ' forecast' from each workbook into a master workbook so that the master workbook would contain the 20 forecast worksheets.
View 9 Replies
View Related
Aug 20, 2009
I have 6 spreadsheets all within the same folder, these are pretty much identical (rows, colums, sheets within them) apart from the names of the files.
I then have a master spreadsheet within the same folder where I want to combine all the data, from all the sheets within each book (if that makes sense!) apart from the data on the last sheet within each book as this is the reference data, onto one sheet within this master file. If possible I only want to copy rows accross which have complete data too.
So: (names not correct)
From book1.xls copy all data on sheets (sheet1, sheet2 etc) except last sheet
From book2.xls copy all data on sheets (sheet1, sheet2 etc) except last sheet
combine onto masterfile.xls on sheet1.
I have searched on here and can only find how to do it with the first sheet in each workbook, not looping through all the sheets in each book. Please see below.
View 9 Replies
View Related
